Search NASA⌕ Search

SEARCH · Search NASA

Results for “composite optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

High-Entropy Ceramic Coatings: Transformative New Materials for Environmentally-Compatible Thin-Film Insulators against High-T Molten Salts

An emerging new class of promising materials, High-Entropy Ceramics (HECs) or Compositionally-Complex Ceramics (CCCs), have been successfully fabricated in the last three years. This project evaluates HECs/CCCs in the concentrated solar power (CSP) context. In this project, we have identified a couple of simple, and key descriptors governing thermal conductivity in HECs. Size disorder among the cations was found to have a strong influence on the thermal conductivity across multiple systems and throughout a vast compositional space. Since identifying this, we have optimized previous compositions to achieve low thermal conductivities of $k$~$1-1.4Wm{-1}K{-1}$. We have further reduced our selection of promising compositions based on project guidelines and applied a theory that can potentially predict reactivity with molten salts to identify a small set of HECs that are suitable for further molten salt heat transfer media (HTM) stability testing. Many compositions reveal poor resistance to molten chloride salt after being exposed for 24 h compared to the reference structural alloy, Haynes 230. However, after 100 h, a few HECs/CCCs show strong parabolic rate constant effects and provide greater resistance to chloride salt compared to Haynes 230 alloy, which shows more linear kinetics. Postmortem characterization of the microstructure reveals the parabolic rate constant originates from a dense reaction layer form at the interface. This feature is absent in Haynes 230, which only shows grain boundary infiltration. The HECs/CCCs were also put in contact with the metal alloy under Ar for 800 h at 800°C and show negligible interaction. Lastly, parabolic rate constant HECs/CCCs also have low thermal conductivity $(<2 Wm^{-1} K^{-1})$ at 800°C. These specimens satisfy all project requirements and demonstrate their promising application in next-generation CSP.

14 SOLAR ENERGY↗

Coal Enhanced PEEK Filament Production for Additive Manufacturing in Industrial Services

The project (Award DE-FE0032146), led by Baker Hughes in collaboration with the University of Wyoming, aims to develop composite PEEK (Polyether-ether-ketone) materials enhanced using coal-derived graphene-based additives suitable for additive manufacturing (3D printing). Coal char (CC), graphene oxide (GO), and reduced graphene oxide (rGO), derived from Powder River Basin (PRB) coal, were successfully integrated into commercial PEEK feedstock. The composite PEEK materials demonstrated tensile and flexural strengths and modulus, Shore hardness, and thermal properties similar to unfilled PEEK. Dielectric strength of 0.5% GO/PEEK is twice that of unfilled PEEK. However, tensile elongation and Izod impact toughness of the composite materials are lower than unfilled PEEK. The 10% CC/PEEK material also shows good recyclability albeit with slightly increased glass transition and cold crystallization temperatures. Filaments of the composite PEEK materials were fabricated using a Filabot system. 3D printing of the composite PEEK initially encountered feeding stoppage caused by the non-uniform diameter of the filament, which was resolved by reducing the nominal diameter from 1.75 to 1.65 mm. The printability of the composite PEEK filaments is limited in geometry and build time, driven by differences in base PEEK feedstock from the commercial PEEK filament at printing conditions. Prototype part printed using the composite filaments shows inconsistent bead width and bead interruption resulting in porosity. Preliminary process and economic evaluation using PRB coal char estimates the cost of GO to be $0.5/lb. Considering the small fraction expected in the composite PEEK, the GO cost is several orders of magnitude lower than the commercial PEEK filament. It is recommended that the printability of composite PEEK filaments to be improved by optimizing the composite PEEK material at the printing conditions and reducing the variations in filament extrusion. Also important is to identify the mechanisms of how coal-derived additives affect the composite PEEK performance and printing characteristics to allow customized material design and processing for target performance.

01 COAL, LIGNITE, AND PEAT↗

Choline Chloride-Based Water-in-Salt Electrolyte for Efficient Iron Electrodeposition

Electrochemical production of iron is a promising low-cost and modular approach to replace the traditional blast furnace. Aqueous electrolytes for iron electrolysis are advantageous as they can be operated at near-ambient temperatures, but they suffer from inefficiencies due to the parasitic hydrogen evolution reaction. In this work, we identify a new water-in-salt electrolyte (WiSE) based on choline chloride (ChCl) for high coulombic efficiency (>85%) iron deposition. Electrochemical analysis of the partial current densities of iron plating and hydrogen co-evolution revealed that, at optimal WiSE compositions, water reduction is kinetically suppressed resulting in an increase in the Fe plating efficiency. Decreased coordination of water and increased coordination of choline’s alcohol group with the Fe 2+ ion were observed through 1 H NMR providing evidence that water reduction is kinetically suppressed in WiSE. Additionally, Raman spectroscopy revealed that complexation effects (with Cl – ) reduce Fe 2+ diffusion coefficients and corresponding limiting currents as the ChCl concentration is increased. This results in an optimal WiSE composition (4 M ChCl + 1 M FeCl 2 ) that provides kinetic suppression of HER but also low transport resistance to Fe plating yielding 85% coulombic efficiency at high current densities.

Sinclair, Nicholas Scott [Case Western Reserve Uni↗

Modeling-Based Design and Optimization of a Gradient Composite Transition Joint

An innovative additively manufactured gradient composite transition joint (AM-GCTJ) has been designed to join dissimilar metals, to address the pressing issue of premature failure observed in conventional dissimilar metal welds (DMWs) when subjected to increased cyclic operating conditions of fossil fuel power plants. The transition design, guided by computational modeling, developed a gradient composite material distribution, facilitating a smooth transition in material volume fraction and physical properties between different alloys. This innovative design seeks to alleviate structural challenges arising from distinct material properties, including high thermal stress and potential cracking issues resulting from the thermal expansion mismatch typically observed in conventional DMWs. In this study, we investigated the creep properties of transition joints comprising Grade 91 steel and 304 stainless steel through a combination of simulations and creep testing experiments. The implementation of a gradient composite design in the plate transition joint resulted in a significant enhancement of creep resistance when compared to the baseline conventional DMW. For instance, the creep rupture life of the transition joint was improved by > 400% in a wide range of temperature and stress testing conditions. Meanwhile, the failure location shifted to the base material of Grade 91 steel. Such enhancement can be primarily attributed to the strong mechanical constraint facilitated by the gradient composite design, which effectively reduced the stresses on the less creep-resistant alloy in the transition zone. Beyond examining plate joints, it is crucial to assess the deformation response of tubular transition joints under pressure loading and transient temperature conditions to substantiate and demonstrate the effectiveness of the design. The simulation results affirm that the tubular transition joint demonstrates superior resistance compared to its counterpart DMW when subjected to multiaxial stresses in tubular structures. In addition, optimization of the transition joint’s geometry dimensions has been conducted to diminish the accumulated deformation and enhance the service life. Lastly, the scalability and potential of the innovative transition joints for large-diameter pipe applications are addressed.

Zhang, Wei↗

Engineering Fe–Fe3C@Fe–N–C Active Sites and Hybrid Structures from Dual Metal–Organic Frameworks for Oxygen Reduction Reaction in H2–O2 Fuel Cell and Li–O2 Battery

Dual metal-organic frameworks (MOFs, i.e., MIL-100(Fe) and ZIF-8) are thermally converted into Fe-Fe3C-embedded Fe-N-codoped carbon as platinum group metal (PGM)-free oxygen reduction reaction (ORR) electrocatalysts. Pyrolysis enables imidazolate in ZIF-8 rearranged into highly N-doped carbon, while Fe from MIL-100(Fe) into N-ligated atomic sites concurrently with a few Fe-Fe3C nanoparticles. Upon precise control of MOF compositions, the optimal catalyst is highly active for the ORR in half-cells (0.88 V in base and 0.79 V versus RHE in acid in half-wave potential), a proton exchange membrane fuel cell (0.76 W cm(-2) in peak power density) and an aprotic Li-O-2 battery (8749 mAh g(-1) in discharge capacity), representing a state-of-the-art PGM-free ORR catalyst. In the material, amorphous carbon with partial graphitization ensures high active site exposure and fast charge transfer simultaneously. Macropores facilitate mass transport to the catalyst surface, followed by oxygen penetration in micropores to reach the infiltrated active sites. Further modeling simulations shed light on the true Fe-Fe3C contribution to the catalyst performance, suggesting Fe3C enhances oxygen affinity, while metallic Fe promotes *OH desorption as the rate-determining step at the nearby Fe-N-C sites. These findings demonstrate MOFs as model system for rational design of electrocatalyst for energy-based functional applications.

battery↗

Compositional Models of Glass/Melt Properties and their Use for Glass Formulation

Nuclear waste glasses must simultaneously meet a number of criteria related to their processability, product quality, and cost factors. The properties that must be controlled in glass formulation and waste vitrification plant operation tend to vary smoothly with composition allowing for glass property-composition models to be developed and used. Models have been fit to the key glass properties. The properties are transformed so that simple functions of composition (e.g., linear, polynomial, or component ratios) can be used as model forms. The model forms are fit to experimental data designed statistically to efficiently cover the composition space of interest. Examples of these models are found in literature. The glass property-composition models, their uncertainty definitions, property constraints, and optimality criteria are combined to formulate optimal glass compositions, control composition in vitrification plants, and to qualify waste glasses for disposal. An overview of current glass property-composition modeling techniques is summarized in this paper along with an example of how those models are applied to glass formulation and product qualification at the planned Hanford high-level waste vitrification plant.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Discovering High Entropy Alloy Electrocatalysts in Vast Composition Spaces with Multiobjective Optimization

High entropy alloys (HEAs) are a highly promising class of materials for electrocatalysis as their unique active site distributions break the scaling relations that limit the activity of conventional transition metal catalysts. Existing Bayesian optimization (BO)-based virtual screening approaches focus on catalytic activity as the sole objective and correspondingly tend to identify promising materials that are unlikely to be entropically stabilized. Here, we overcome this limitation with a multiobjective BO framework for HEAs that simultaneously targets activity, cost-effectiveness, and entropic stabilization. With diversity-guided batch selection further boosting its data efficiency, the framework readily identifies numerous promising candidates for the oxygen reduction reaction that strike the balance between all three objectives in hitherto unchartered HEA design spaces comprising up to 10 elements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Controllable synthesis of CNT@ZnO composites with enhanced electrochemical properties for lithium-ion battery

Highlights: • The optimized CNT@ZnO composites deliver 709.2 mAh g{sup −1} at 100 mA g{sup −1} after 50 cycles. • The structure of CNT@ZnO composites has the advantages of both ZnO and MWCNTs. • The optimized CNT@ZnO composites are promising anode materials for LIBs. - Abstract: The design and synthesis of anode materials with novel structures are one of crucial issues for developing next-generation lithium-ion battery. In this work, carbon nanotube@zinc oxide (CNT@ZnO) composites are synthesized by a liquid-phase method using CNTs as a conductive support. The design of CNT@ZnO composites combines the advantages of both ZnO nanoparticles and CNTs. The optimized CNT@ZnO composite exhibits the superior cycling and rate performance. It could deliver a discharge capacity of 709.2 mAh g{sup −1} at 100 mA g{sup −1} after 50 cycles. The electrochemical results indicate that the as-synthesized CNT@ZnO composite is superior in enhancing the electrochemical performance of ZnO-based anode materials.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A micro to macro approach to polymer matrix composites damage modeling : final LDRD report.

Capabilities are developed, verified and validated to generate constitutive responses using material and geometric measurements with representative volume elements (RVE). The geometrically accurate RVEs are used for determining elastic properties and damage initiation and propagation analysis. Finite element modeling of the meso-structure over the distribution of characterizing measurements is automated and various boundary conditions are applied. Plain and harness weave composites are investigated. Continuum yarn damage, softening behavior and an elastic-plastic matrix are combined with known materials and geometries in order to estimate the macroscopic response as characterized by a set of orthotropic material parameters. Damage mechanics and coupling effects are investigated and macroscopic material models are demonstrated and discussed. Prediction of the elastic, damage, and failure behavior of woven composites will aid in macroscopic constitutive characterization for modeling and optimizing advanced composite systems.

36 MATERIALS SCIENCE↗

Computational design of thermoelectric alloys through optimization of transport and dopability

Alloying is a common technique to optimize the functional properties of materials for thermoelectrics, photovoltaics, energy storage etc. Designing thermoelectric (TE) alloys is especially challenging because it is a multi-property optimization problem, where the properties that contribute to high TE performance are interdependent. In this work, we develop a computational framework that combines first-principles calculations with alloy and point defect modeling to identify alloy compositions that optimize the electronic, thermal, and defect properties. We apply this framework to design n-type Ba 2(1–x) Sr 2x CdP 2 Zintl thermoelectric alloys. Our predictions of the crystallographic properties such as lattice parameters and site disorder are validated with experiments. To optimize the conduction band electronic structure, we perform band unfolding to sketch the effective band structures of alloys and find a range of compositions that facilitate band convergence and minimize alloy scattering of electrons. Here, we assess the n-type dopability of the alloys by extending the standard approach for computing point defect energetics in ordered structures. Through the application of this framework, we identify an optimal alloy composition range with the desired electronic and thermal transport properties, and n-type dopability. Such a computational framework can also be used to design alloys for other functional applications beyond TE.

36 MATERIALS SCIENCE↗

Physics in the Machine: Integrating Physical Knowledge in Autonomous Phase-Mapping

Application of artificial intelligence (AI), and more specifically machine learning, to the physical sciences has expanded significantly over the past decades. In particular, science-informed AI, also known as scientific AI or inductive bias AI, has grown from a focus on data analysis to now controlling experiment design, simulation, execution and analysis in closed-loop autonomous systems. The CAMEO (closed-loop autonomous materials exploration and optimization) algorithm employs scientific AI to address two tasks: learning a material system’s composition-structure relationship and identifying materials compositions with optimal functional properties. By integrating these, accelerated materials screening across compositional phase diagrams was demonstrated, resulting in the discovery of a best-in-class phase change memory material. Key to this success is the ability to guide subsequent measurements to maximize knowledge of the composition-structure relationship, or phase map. In this work we investigate the benefits of incorporating varying levels of prior physical knowledge into CAMEO’s autonomous phase-mapping. This includes the use of ab-initio phase boundary data from the AFLOW repositories, which has been shown to optimize CAMEO’s search when used as a prior.

97 MATHEMATICS AND COMPUTING↗

Interaction–Deletion: A Composite Energy Method for the Optimization of Molecular Systems Selectively Removing Specific Nonbonded Interactions

The complex interactions between different portions of a large molecule can be challenging to analyze through traditional electronic structure calculations. Moreover, standard methods cannot easily quantify the physical consequences of individual pairwise interactions inside a molecule. By creating a set of molecular fragments, we propose a composite energy method to explore changes in a molecule caused by removing selected nonbonded interactions between different molecular portions. Energies and forces are easily obtained with this composite approach, allowing geometry optimizations that lead to chemically meaningful structures that describe how the omitted interactions contribute to changes in the local geometrical minima. We illustrate the application of our new hybrid scheme by computing the influence of intramolecular hydrogen-bonding interactions in two small molecules: 1,6-(tG + G + TG + G + g – )-hexanediol and a cyclic analogue, cis-1,4-cyclohexanediol. The resulting structural and energetic changes are interpreted to yield key physical insights and quantify concepts such as “preparation energy” or “reorganization energy”. We demonstrate that the composite method can be extended to larger molecular systems by showing its application on a Si(100) surface model containing interactions between dissociated ammonia molecules on adjacent surface dimers. The scheme’s efficacy is also tested by applying it to systems having multiple intramolecular interactions, viz., 310-polyglycine and H+GPGG. Furthermore, the cooperative nature of intramolecular hydrogen bonds is explored by using interaction–deletion in 2-nitrobenzene-1,3-diol.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Robust and High-Waste Loaded Glass Formulations for Hanford Low-Activity Waste - 19050

The Hanford Low-Activity Waste (LAW) vitrification facility will receive LAW batches with abruptly changing compositions that span relatively broad ranges. In particular, the concentration ratios of sodium-to-sulfate, -chloride, -chromate, -phosphate, -potassium, and -aluminate create challenges in glass formulation. Glass compositions that simultaneously satisfy several processability, product quality, and composition constraints with sufficient confidence must be formulated for each LAW batch in near-realtime to enable desired throughput. A method for developing glass compositions while maximizing the waste loading and the process robustness was developed. This method compiled the glass composition-property data collected over nearly two decades, primarily by Pacific Northwest National Laboratory, The Catholic University of America, and Savannah River National Laboratory, in support of both the Hanford Tank Waste Treatment and Immobilization Plant project and the U.S. Department of Energy Office of River Protection Enhanced Waste Glass project. These data were used to develop models that link the melter feed composition to the resulting glass properties. Mathematical constructs were developed to optimize glass compositions for each waste batch in real-time that will simultaneously satisfy processability, product quality, and composition constraints with sufficient statistical confidence. Property prediction and various process uncertainties were reflected in the formulation. The formulation approach directly lends itself to adjustment of glass formulation to achieve program goals. This presentation will summarize the formulation approach and supporting data. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Increasing Compressed Gas Energy Storage Density Using CO2–N2 Gas Mixture

This paper demonstrates a new method by which the energy storage density of compressed air systems is increased by 56.8% by changing the composition of the compressed gas to include a condensable component. A higher storage density of 7.33 MJ/m3 is possible using a mixture of 88% CO2 and 12% N2 compared to 4.67 MJ/m3 using pure N2. This ratio of gases representing an optimum mixture was determined through computer simulations that considered a variety of different proportions from pure CO2 to pure N2. The computer simulations are based on a thermodynamic equilibrium model that predicts the mixture composition as a function of volume and pressure under progressive compression to ultimately identify the optimal mixture composition (88% CO2 + 12% N2). The model and simulations predict that the optimal gas mixture attains a higher energy storage density than using either of the pure gases.

25 ENERGY STORAGE↗

Investigation of Bone Growth in Additive-Manufactured Pedicle Screw Implant by Using Ti-6Al-4V and Bioactive Glass Powder Composite

In this study, we optimized the geometry and composition of additive-manufactured pedicle screws. Metal powders of titanium-aluminum-vanadium (Ti-6Al-4V) were mixed with reactive glass-ceramic biomaterials of bioactive glass (BG) powders. To optimize the geometry of pedicle screws, we applied a novel numerical approach to proposing the optimal shape of the healing chamber to promote biological healing. We examined the geometry and composition effects of pedicle screw implants on the interfacial autologous bone attachment and bone graft incorporation through in vivo studies. The addition of an optimal amount of BG to Ti-6Al-4V leads to a lower elastic modulus of the ceramic-metal composite material, effectively reducing the stress-shielding effects. Pedicle screw implants with optimal shape design and made of the composite material of Ti-6Al-4V doped with BG fabricated through additive manufacturing exhibit greater osseointegration and a more rapid bone volume fraction during the fracture healing process 120 days after implantation, per in vivo studies.

stress-shielding effect↗

A self-forming composite electrolyte for solid-state sodium battery with ultra-long cycle life

Replacing organic liquid electrolyte with inorganic solid electrolytes (SE) can potentially address the inherent safety problems in conventional rechargeable batteries. Furthermore, all-solid-state batteries have been plagues by the relatively low ionic conductivity of solid electrolytes and large charge-transfer resistance resulted from solid-solid interfaces between electrode materials and solid electrolytes. Here we report a new design strategy for improving the ionic conductivity of solid electrolyte by self-forming a composite material. An optimized Na + ion conducting composite electrolyte derived from the NASICON structure was successfully synthesized, yielding ultra-high ionic conductivity of 3.4 mS cm –1 at 25°C and 14 ms cm –1 at 80°C.

25 ENERGY STORAGE↗