Search NASA⌕ Search

SEARCH · Search NASA

Results for “compression rate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Anomalous entropy-driven kinetics of dislocation nucleation

The kinetics of dislocation reactions, such as dislocation multiplication, controls the plastic deformation in crystals beyond their elastic limit, therefore critical mechanisms in a number of applications in materials science. We present a series of large-scale molecular dynamics simulations that shows that one such type of reactions, the nucleation of dislocation at free surfaces, exhibit unconventional kinetics, including unexpectedly large nucleation rates under compression, very strong entropic stabilization under tension, as well as strong non-Arrhenius behavior. These unusual kinetics are quantitatively rationalized using a variational transition state theory approach coupled with an efficient numerical scheme for the estimation of vibrational entropy changes. These results highlight the need for a variational treatment of the kinetics to quantitatively capture dislocation reaction kinetics, especially at low-to-moderate strains where large deformations are required to activate reactions. These observations suggest possible explanations to previously observed unconventional deformation kinetics in both molecular dynamics simulations and experiments.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dynamic high pressure phase transformation of ZrW 2 O 8

Phase transformations under high strain rates (dynamic compression) are examined in situ on ZrW 2 O 8 , a negative thermal expansion ternary ceramic displaying polymorphism. Amorphization, consistent with prior quasi-static measurements, was observed at a peak pressure of 3.0 GPa under dynamic conditions, which approximate those expected during fabrication. Evidence of partial amorphization was observed at lower pressure (1.8 GPa) that may be kinetically restrained by the short (<~150 ns) time scale of the applied high pressure. The impact of kinetics of pressure-induced amorphization from material fabrication methods is briefly discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Simple Statistical Models for Predicting Overpressure Due to CO2 and Low-Salinity Waste-Fluid Injection into Deep Saline Formations

Deep saline aquifers have been used for waste-fluid disposal for decades and are the proposed targets for large-scale CO2 storage to mitigate CO2 concentration in the atmosphere. Due to relatively limited experience with CO2 injection in deep saline formations and given that the injection targets for CO2 sometimes are the same as waste-fluid disposal formations, it could be beneficial to model and compare both practices and learn from the waste-fluid disposal industry. In this paper, we model CO2 injection in the Patterson Field, which has been proposed as a site for storage of 50 Mt of industrial CO2 over 25 years. We propose general models that quickly screen the reservoir properties and calculate pressure changes near and far from the injection wellbore, accounting for variable reservoir properties. The reservoir properties we investigated were rock compressibility, injection rate, vertical-to-horizontal permeability ratio, average reservoir permeability and porosity, reservoir temperature and pressure, and the injectant total dissolved solids (TDS) in cases of waste-fluid injection. We used experimental design to select and perform simulation runs, performed a sensitivity analysis to identify the important variables on pressure build-up, and then fit a regression model to the simulation runs to obtain simple proxy models for changes in average reservoir pressure and bottomhole pressure. The CO2 injection created more pressure compared to saline waste-fluids, when similar mass was injected. However, we found a more significant pressure buildup at the caprock-reservoir interface and lower pressure buildup at the bottom of the reservoir when injecting CO2 compared with waste-fluid injection.

Ansari, Esmail↗

Rendezvous and docking with remote piloted vehicles

The man-in-the-loop control system requirements for the Orbital Maneuvering Vehicle (OMV) are examined. Since many similarities exist between the Teleoperator Retrieval System (TRS) and the unfolding OMV concept, a review of the TRS control system baseline along with selected design trades which led to that baseline are discussed. TRS program issues relevant to the man-in-the-loop control system design include thruster size, communication delays and TV bandwidth compression, range/range rate radar, tumbling targets, shimmed docking interface, and control system definition. A TRS vs. OMV simulation comparative study is summarized, and the major issues currently facing the control system designer on OMV are discussed.

Micheal, J. D.↗

An internal variable constitutive model for the large deformation of metals at high temperatures

The advent of large deformation finite element methodologies is beginning to permit the numerical simulation of hot working processes whose design until recently has been based on prior industrial experience. Proper application of such finite element techniques requires realistic constitutive equations which more accurately model material behavior during hot working. A simple constitutive model for hot working is the single scalar internal variable model for isotropic thermal elastoplasticity proposed by Anand. The model is recalled and the specific scalar functions, for the equivalent plastic strain rate and the evolution equation for the internal variable, presented are slight modifications of those proposed by Anand. The modified functions are better able to represent high temperature material behavior. The monotonic constant true strain rate and strain rate jump compression experiments on a 2 percent silicon iron is briefly described. The model is implemented in the general purpose finite element program ABAQUS.

Brown, Stuart↗

A robust compression system for low bit rate telemetry: Test results with lunar data

A robust noiseless encoding scheme is presented for encoding the gamma ray spectroscopy data. The encoding algorithm is simple to implement and has minimal buffering requirements. The decoder contains error correcting capability in the form of a MAP receiver. While the MAP receiver adds some complexity, this is limited to the decoder. Nothing additional is needed at the encoder side for its functioning.

Sayood, Khalid↗

Experiments on the enhancement of compressible mixing via streamwise vorticity. I - Optical measurements

The present study was initiated in an attempt to increase the compressible mixing rate of a supersonic jet injected into a co-flowing supersonic stream by adding streamwise vorticity to the injected flow. This flowfield was imaged using the planar laser scattering technique, and mixing rates were derived entirely from captured images. The results of this image analysis indicate that increases in mixing rate of up to 60 percent are possible through the addition of streamwise vorticity. Furthermore, the degree of mixing enhancement appears to be dependent on the amount of swirl added. Analysis of the instantaneous turbulent structure suggests that this increase in mixing is due to a modification of the largest turbulent structures in the mixing layer.

Naughton, J. W.↗

Virtual reality and telerobotics applications of an Address Recalculation Pipeline

The technology described in this paper was designed to reduce latency to user interactions in immersive virtual reality environments. It is also ideally suited to telerobotic applications such as interaction with remote robotic manipulators in space or in deep sea operations. in such circumstances the significant latency is observed response to user stimulus which is due to communications delays, and the disturbing jerkiness due to low and unpredictable frame rates on compressed video user feedback or computationally limited virtual worlds, can be masked by our techniques. The user is provided with highly responsive visual feedback independent of communication or computational delays in providing physical video feedback or in rendering virtual world images. Virtual and physical environments can be combined seamlessly using these techniques.

Regan, Matthew↗

A Comparison of Candidate Seal Designs for Future Docking Systems

NASA is developing a new docking system to support future space exploration missions to low Earth orbit, the Moon, and other destinations. A key component of this system is the seal at the main docking interface which inhibits the loss of cabin air once docking is complete. Depending on the mission, the seal must be able to dock in either a seal-on-flange or seal-on-seal configuration. Seal-on-flange mating would occur when a docking system equipped with a seal docks to a system with a flat metal flange. This would occur when a vehicle docks to a node on the International Space Station. Seal-on-seal mating would occur when two docking systems equipped with seals dock to each other. Two types of seal designs were identified for this application: Gask-O-seals and multi-piece seals. Both types of seals had a pair of seal bulbs to satisfy the redundancy requirement. A series of performance assessments and comparisons were made between the candidate seal designs indicating that they meet the requirements for leak rate and compression and adhesion loads under a range of operating conditions. Other design factors such as part count, integration into the docking system tunnel, seal-on-seal mating, and cost were also considered leading to the selection of the multi-piece seal design for the new docking system. The results of this study can be used by designers of future docking systems and other habitable volumes to select the seal design best-suited for their particular application.

Dunlap, Patrick, H., Jr.↗

Data compression techniques applied to high resolution high frame rate video technology

An investigation is presented of video data compression applied to microgravity space experiments using High Resolution High Frame Rate Video Technology (HHVT). An extensive survey of methods of video data compression, described in the open literature, was conducted. The survey examines compression methods employing digital computing. The results of the survey are presented. They include a description of each method and assessment of image degradation and video data parameters. An assessment is made of present and near term future technology for implementation of video data compression in high speed imaging system. Results of the assessment are discussed and summarized. The results of a study of a baseline HHVT video system, and approaches for implementation of video data compression, are presented. Case studies of three microgravity experiments are presented and specific compression techniques and implementations are recommended.

Hartz, William G.↗

MHD simulation on magnetic compression of field reversed configurations with NIMROD

Abstract Magnetic compression has long been proposed a promising method for plasma heating in a field reversed configuration (FRC). However, it remains a challenge to fully understand the physical mechanisms underlying the compression process, due to its highly dynamic nature beyond the one-dimensional (1D) adiabatic theory model (Spencer et al 1983 Phys. Fluids 26 1564). In this work, magnetohydrodynamics simulations on the magnetic compression of FRCs using the NIMROD code (Sovinec et al 2004 J. Comput. Phys. 195 355) and their comparisons with the 1D theory have been performed. The effects of the assumptions of the theory on the compression process have been explored, and the detailed profiles of the FRC during compression have been investigated. The pressure evolution agrees with the theoretical prediction under various initial conditions. The axial contraction of the FRC can be affected by the initial density profile and the ramping rate of the compression magnetic field, but the theoretical predictions on the FRC’s length in general and the relation r s = 2 r o in particular hold approximately well during the whole compression process, where r s is the major radius of FRC separatrix and r o is that of the magnetic axis. The evolutions of the density and temperature can be affected significantly by the initial equilibrium profile and the ramping rate of the compression magnetic field. During the compression, the major radius of the FRC is another parameter that is susceptible to the ramping rate of the compression field. Basically, for the same magnetic compression ratio, the peak density is higher and the FRC’s radius r s is smaller than the theoretical predictions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Temporal compression of pulses from a 100-KHz-repetiton-rate femtosecond ytterbium laser

We report the temporal compression a femtosecond ytterbium laser pulse at a pulse repetition rate of 100 kHz using the effect of nonlinear self-phase modulation in a gas-filled capillary. A 260-fs laser pulse is compressed down to 17 fs with an energy efficiency of 40%. An average radiation power at the compressor output is 2 W. At a second compression stage, the time contrast is increased and the pulse duration is reduced in the process of the second harmonic generation in a KDP crystal. The obtained pulses have a duration of 11 fs at an efficiency of 35%. (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

ALFVÉN WAVE HEATING OF THE SOLAR CHROMOSPHERE: 1.5D MODELS

Physical processes that may lead to solar chromospheric heating are analyzed using high-resolution 1.5D non-ideal MHD modeling. We demonstrate that it is possible to heat the chromospheric plasma by direct resistive dissipation of high-frequency Alfvén waves through Pedersen resistivity. However, this is unlikely to be sufficient to balance radiative and conductive losses unless unrealistic field strengths or photospheric velocities are used. The precise heating profile is determined by the input driving spectrum, since in 1.5D there is no possibility of Alfvén wave turbulence. The inclusion of the Hall term does not affect the heating rates. If plasma compressibility is taken into account, shocks are produced through the ponderomotive coupling of Alfvén waves to slow modes and shock heating dominates the resistive dissipation. In 1.5D shock coalescence amplifies the effects of shocks, and for compressible simulations with realistic driver spectra, the heating rate exceeds that required to match radiative and conductive losses. Thus, while the heating rates for these 1.5D simulations are an overestimate, they do show that ponderomotive coupling of Alfvén waves to sound waves is more important in chromospheric heating than Pedersen dissipation through ion–neutral collisions.

79 ASTRONOMY AND ASTROPHYSICS↗

A novel method may reveal bulk metallic glass compressive ductility trends in high data rate nanoindentation

Recent methods allow novel amorphous alloy compositions to be rapidly manufactured at small scale; however, obtaining materials properties such as compressive ductility from these smaller specimens has remained a challenge. Here, we suggest a potential high-throughput nanoindentation method that may be able to rapidly characterize the relative compressive ductility between these alloys based on their serration characteristics. The properties of emergent serrations, when interpreted in a simple micromechanical stress relaxation model, may order these materials by their compressive plastic strain to failure. These results are consistent with the ordering obtained from compressed specimens as well as with model simulations, suggesting that this model may be broadly useful for interpreting compressive ductility from nanoindentation serrations. After it is validated on more materials, this new method will match the rapid pace of amorphous alloy development, thus allowing metallic glass properties to be fine-tuned for each application prior to scale prototyping.

36 MATERIALS SCIENCE↗

Image compression system and method having optimized quantization tables

A digital image compression preprocessor for use in a discrete cosine transform-based digital image compression device is provided. The preprocessor includes a gathering mechanism for determining discrete cosine transform statistics from input digital image data. A computing mechanism is operatively coupled to the gathering mechanism to calculate a image distortion array and a rate of image compression array based upon the discrete cosine transform statistics for each possible quantization value. A dynamic programming mechanism is operatively coupled to the computing mechanism to optimize the rate of image compression array against the image distortion array such that a rate-distortion-optimal quantization table is derived. In addition, a discrete cosine transform-based digital image compression device and a discrete cosine transform-based digital image compression and decompression system are provided. Also, a method for generating a rate-distortion-optimal quantization table, using discrete cosine transform-based digital image compression, and operating a discrete cosine transform-based digital image compression and decompression system are provided.

Ratnakar, Viresh↗

Deflagration Rates and Molecular Bonding Trends of Statically Compressed Secondary Explosives

We discuss our measurements of the chemical reaction propagation rate as a function of pressure. Materials investigated have included CL-20, HMX, TATB, and RDX crystalline powders, LX-04, Comp B, and nitromethane. The anomalous correspondence between crystal structure, including in some instances isostructural phase transitions, on pressure-dependant RPRs of TATB, HMX, Nitromethane, CL-20, and PETN have been elucidated using micro-IR and -Raman spectroscopies. Here we specifically highlight pressure-dependent physicochemical mechanisms affecting the deflagration rate of nitromethane and epsilon-CL-20. We find that pressure induced splitting of symmetric stretch NO{sub 2} vibrations can signal the onset of increasingly more rapid combustion reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗