Search NASA⌕ Search

SEARCH · Search NASA

Results for “conditional approach”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

FY24 Report on Water NSTF Testing: Lower Tank Inlet Piping Configuration

The following report serves as a summary of the accomplishments and testing results by the Natural convection Shutdown heat removal Test Facility (NSTF) experimental program over the past 12-month period. A major activity included reconfiguration of the chimney piping geometry which altered the discharge position into the tank from the original 50% tank height to a new lower position at a 10.9% tank height. This modification increases the volume of available coolant thus extending long-term operating capacity, however also results in a decreased liquid driving head which has the potential to reduce the natural circulation efficiency and decrease overall performance. Examination of the tradeoffs for these two configurations is an area of interest for RCCS designers and drove planned test activities this year. Ten matrix tests were performed in FY24, totaling 195 hours of heated operations and 12.9 MWh of electrical heating throughout the year, with eight classified as Accepted per NQA-1 and two classified as Trending. Testing prior to the facility reconfiguration examined the facility response to throttling at the tank inlet, demonstrating increased sensitivity of flow instabilities to throttling within the two-phase region when compared to throttling at the lower sensitivity single-phase inlet region. Testing after the chimney reconfiguration began with a baseline test at conditions of 80% inventory fill and prototypic thermal power input of 2.1 MW t . In addition to establishing a reference for nominal system behavior and performance, repeat testing with multiple subsequent runs demonstrated strong repeatability between tests performed at the same conditions in this new configuration. These tests also examined if influences would occur to system behavior with installation of new higher-resolution instrumentation within the upper chimney. In this critical region where boiling and flashing phenomena dominate, the test results provided confidence that the new instrumentation does not uncharacteristically influence the observed behaviors. An inventory parametric series was then initiated to examine system behavior with the new chimney configuration at six varying initial inventory levels, ranging from high 80% to low 20% fill. Two-phase oscillations with similar peak and mean flow rates were observed when comparing to the previous mid tank configuration. Generally, similar system response trends with inventory were also observed, such as two phase oscillations suppressing as inventories were lowered. However, in one absolute inventory comparison at the highest fill of 80%, flow oscillations saw a gradual growth over the 4 hours of two-phase operation in the new lower tank inlet configuration, opposite of the gradual dampening observed in the mid tank inlet configuration. This can be attributed to, in part, a greater hydrostatic head pressure above the two-phase discharge region where the boiling front is developed. Furthermore, the change resulted in greater sensitivity to liquid degassing phenomena during single-phase heating, causing loop instabilities to form which trigged moderate flow degradation during the period approaching saturation and boiling conditions. This behavior had been observed previously under some conditions but was a common occurrence in recent testing with the newer lower tank inlet configuration. Initial observations from these first data sets suggest an overall larger window of stability for the mid tank inlet configuration compared to the lower tank inlet. Lastly, the lowest inventory fill test was repeated over an extended testing window to examine depletion behavior. Natural circulation flow and effective heat removal performance were observed during most of the testing period; only after the tank became fully drained (0% fill) did flow stagnate and violent geysering events occur. This early observation confirms one relative advantage over the mid tank inlet configuration, which stagnated under comparable conditions at ~20% inventory remaining in the tank.

42 ENGINEERING↗
DOE OSTI2025

Arctic Impact Identification with Less Data Using Variable Relationships: An Exploratory Express LDRD project.

Regional impacts from sea ice loss can be challenging to separate from internal climate variability, potentially requiring thousands of ensemble members. East Asian wintertime cooling has been linked to sea ice loss from present day conditions in the Polar Amplification Model Intercomparison Project with these large ensemble counts. This cooling is theorized to arise from a strengthened Siberian High and East Asian Jet response. The strengthened Siberian High can be detected with one fifth the ensemble members needed for the East Asian wintertime cooling in a single model. We thus hypothesize that leveraging relationships between multiple variables in a conditional pathways-based approach would reduce the number of required ensemble members to conclusively attribute East Asian wintertime cooling to future sea ice concentrations. In all analyzed cases, confidence was increased when evaluating sea ice loss’s responsibility for the joint effects of East Asian cooling, East Asian Jet strengthening, and Siberian High strengthening over just East Asian cooling. However, we were not able to confidently attribute future East Asian wintertime cooling to sea ice loss in a single model. We found that significant intra-ensemble variability within single Earth System Models (ESMs) produced highly uncertain forcing response models upon which attribution results were undermined. We were able to show that ensemble mean seasonally averaged metrics from multiple ESMs greatly improved the accuracy of the forcing response linear models and exposed the necessity of all three steps in the pathway (sea ice area, Siberian High pressure, and East Asian Jet speed) for accurate prediction of East Asian wintertime cooling. Although all three steps were necessary, East Asian wintertime cooling possesses a large dependence on the Siberian High pressure, which weakens the confidence associated with overall strong joint-attribution comparing present day and future scenarios. We believe transitioning the pathway nodes to relative changes between the Siberian High and Aleutian Low as well as between the midlatitude westerlies and subtropical jet in the East Asianj Jet region may be able to produce significant attribution more fully dependent upon all three steps. Ultimately, this research demonstrates the simple extensibility of conditional pathways-based attribution to sea ice loss forcing on the Earth system.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Heterogeneous Machine Learning on High Performance Computing for End to End Driving of Autonomous Vehicles

Current artificial intelligence techniques for end to end driving of autonomous vehicles typically rely on a single form of learning or training processes along with a corresponding dataset or simulation environment. Relatively speaking, success has been shown for a variety of learning modalities in which it can be shown that the machine can successfully “drive” a vehicle. However, the realm of real-world driving extends significantly beyond the realm of limited test environments for machine training. This creates an enormous gap in capability between these two realms. With their superior neural network structures and learning capabilities, humans can be easily trained within a short period of time to proceed from limited test environments to real world driving. For machines though, this gap is guarded by at least two challenges: 1) machine learning techniques remain brittle and unable to generalize to a wide range of scenarios, and 2) effective training data that enhances generalization and generates the desired driving behavior. Further, each challenge can be computationally intensive on its own thereby exasperating the gap. Moreover, is has not yet been shown that a single form of learning or training is capable of addressing a large range of scenarios. As a result, solving the first challenge does not inherently solve the second and vice versa. The work described here discusses an approach to address the first challenge that would also provide a foundation for solving the second. Our approach utilizes a combination of conditional imitation learning with a static dataset, reinforcement learning with a simulation environment, and high-performance computing to train a neural network. As a result, this reduces the “time to solution” from to the existing techniques for autonomous driving and provides an extensible framework to address the second key challenge.

autonomous vehicles↗
DOE OSTI2020

Combined analysis of microbial metagenomic and metatranscriptomic sequencing data to assess in situ physiological conditions in the premature infant gut

Microbes alter their transcriptomic profiles in response to the environment. The physiological conditions experienced by a microbial community can thus be inferred using meta-transcriptomic sequencing by comparing transcription levels of specifically chosen genes. However, this analysis requires accurate reference genomes to identify the specific genes from which RNA reads originate. In addition, such an analysis should avoid biases in transcript counts related to differences in organism abundance. In this study we describe an approach to address these difficulties. Sample-specific meta-genomic assembled genomes (MAGs) were used as reference genomes to accurately identify the origin of RNA reads, and transcript ratios of genes with opposite transcription responses were compared to eliminate biases related to differences in organismal abundance, an approach hereafter named the “diametric ratio” method. We used this approach to probe the environmental conditions experienced by Escherichia spp. in the gut of 4 premature infants, 2 of whom developed necrotizing enterocolitis (NEC), a severe inflammatory intestinal disease. We analyzed twenty fecal samples taken from four premature infants (4–6 time points from each infant), and found significantly higher diametric ratios of genes associated with low oxygen levels in samples of infants later diagnosed with NEC than in samples without NEC. We also show this method can be used for examining other physiological conditions, such as exposure to nitric oxide and osmotic pressure. These study results should be treated with caution, due to the presence of confounding factors that might also distinguish between NEC and control infants. Nevertheless, together with benchmarking analyses, we show here that the diametric ratio approach can be applied for evaluating the physiological conditions experienced by microbes in situ. Results from similar studies can be further applied for designing diagnostic methods to detect NEC in its early developmental stages.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Targeted Chemical Looping Materials Discovery by an Inverse Design

Chemical looping with oxygen uncoupling (CLOU) materials is actively sought for combustion of carbonaceous materials to achieve complete conversion and capture of carbon dioxide. These materials may play a vital role in reducing atmospheric carbon via negative carbon output. However, there is no one‐size‐fits‐all approach as different operating conditions and feedstocks may require different CLOU materials. As a result, the exploration and discovery of high‐performance CLOU materials can be a slow process. To address this challenge, a high‐throughput inverse machine learning workflow that identifies optimum materials from perovskite oxides for a given set of targets is developed—temperature and Gibbs free energy of oxygen formation. The model is trained on high‐throughput density functional theory calculations of CLOU materials and inverts the materials design process using a genetic algorithm to produce realistic substituted SrFeO 3‐δ compositions as output. Using the inverse model, it is able to identify several interesting new families of CLOU materials: Sr 1‐ x A x Fe 1‐ y B y O 3‐δ (e.g., A = Ca or K; B = Mg, Bi, Mn, Ni, Co, Cu, or Zn). These materials have shown promising properties, and some of them even outperform the benchmark material in terms of oxygen release kinetics under relevant CLOU operating conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Reactor rate modulation oscillation analysis with two detectors in Double Chooz

A θ 13 oscillation analysis based on the observed antineutrino rates at the Double Chooz far and near detectors for different reactor power conditions is presented. This approach provides a so far unique simultaneous determination of θ 13 and the total background rates without relying on any assumptions on the specific background contributions. The analysis comprises 865 days of data collected in both detectors with at least one reactor in operation. The oscillation results are enhanced by the use of 24.06 days (12.74 days) of reactor-off data in the far (near) detector. The analysis considers the ${\overline{\nu}}_e$ interactions up to a visible energy of 8.5 MeV, using the events at higher energies to build a cosmogenic background model considering fast-neutrons interactions and 9 Li decays. The background-model-independent determination of the mixing angle yields sin 2 (2 θ 13 ) = 0.094 ± 0.017, being the best-fit total background rates fully consistent with the cosmogenic background model. A second oscillation analysis is also performed constraining the total background rates to the cosmogenic background estimates. While the central value is not significantly modified due to the consistency between the reactor-off data and the background estimates, the addition of the background model reduces the uncertainty on θ 13 to 0.015. Along with the oscillation results, the normalization of the anti-neutrino rate is measured with a precision of 0.86%, reducing the 1.43% uncertainty associated to the expectation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Simulation of dynamic crystal plasticity with a Lagrangian discontinuous Galerkin hydrodynamic method

Here we present a new Lagrangian modal discontinuous Galerkin (DG) hydrodynamic method that supports a dynamic dislocation based crystal plasticity model for simulating the mechanical behavior of crystallographic materials, both single crystal and polycrystalline, under dynamic conditions. A modal DG approach is used to evolve fields relevant to conservation laws. These fields are approximated by Taylor series polynomials of varying degree. These polynomials describe macro-scale hydrodynamic behavior while their evolution is determined by evaluating the dynamic crystal plasticity model at material points within the element. The dynamic crystal plasticity model is sensitive to the time increment size, with too large of time increments leading to instability in the model. To mitigate this, the temporal evolution of the dynamic crystal plasticity model is achieved with the combination of a sub-incrementing scheme with Heun’s third-order time integration scheme, which is also used to temporally evolve the governing equations. The implementation of the dynamic crystal plasticity model within the DG framework is tested using a 2D approximation of the Taylor impact test with a single crystal material, using quadratic elements that have faces that can bend. In addition to the standard continuous material modeling, we propose a new simulation method that would represent the heterogeneous behavior of polycrystalline microstructures within an element by varying the position and material properties of the material points within the element. This method is demonstrated using random orientation distributions on materials points that are arranged in both structured and random configurations.

42 ENGINEERING↗
DOE OSTI2022

Defective Sn-Zn perovskites through bio-directed routes for modulating CO 2 RR

Sn and Zn oxides can catalyze electrochemical CO 2 reduction reactions (CO 2 RR) to produce useful chemicals. Herein, we report on perovskite-type tin-zinc oxides (TZO) synthesized by a biomineralization approach under benign aqueous conditions. The resulting TZO catalysts are disordered and possess a high quantity of defects, which serve as highly reactive active sites in CO 2 RR. Selectively toward formate or CO is tunable toward the relative amounts of Sn and Zn and their associated O defects. In-situ X-ray absorption spectroscopy measurements reveal electronic and structural transformations consistent with oxygen vacancy formation at Sn-O-Zn bridges as a function of cathodic potential that strongly correlates to CO2RR selectivity. Further, Density functional theory (DFT) calculations demonstrate that introducing an oxygen vacancy in TZO influences drastically influences formate/CO selectivity, consistent with our in-situ XAS findings and catalytic performance. Overall, these findings demonstrate the potential of biomineralization to fabricate perovskite-type metal oxides for energy conversion reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Integrated modeling of boron powder injection for real-time plasma-facing component conditioning

An integrated modeling framework for investigating the application of solid boron (B) powder injection for real-time surface conditioning of plasma-facing components (PFCs) in tokamak environments is presented. Utilizing the DIII-D impurity powder dropper (IPD) setup, this study simulates B powder injection scenarios ranging from milligrams to tens of milligrams per second, corresponding to boron flux rates of 10 20 –10 21 B/s in standard L-mode conditions. The comprehensive modeling approach combines EMC3-EIRENE for simulating the deuterium plasma background and the Dust Injection Simulator (DIS) for the ablation and transport of the boron powder particles. EMC3 trace impurity fluid modeling results show substantial boron transport to the inboard lower divertor, predominantly influenced by the main ion plasma flow. The dependency on powder particle size (5-250 µm) was found to be insignificant for the scenario considered. The effects of erosion and redeposition were considered to reconcile the discrepancies with experimental observations, which saw substantial deposition on the outer divertor plasma-facing components. For this purpose, the WallDYN3D code was updated to include boron sources within the plasma domain and integrated into the modeling framework. The mixed-material migration modeling shows evolving boron deposition patterns, suggesting the formation of mixed B-C layers or predominantly B coverage depending on the powder mass flow rate. While the modeling outcomes at lower B injection rates tend to align with DIII-D experimental observations, the prediction of near-pure boron layers at higher rates has yet to be experimentally verified in the carbon environment of the DIII-D tokamak. The extensive reach of boron layers found in the modeling suggests the need for modeling that encompasses the entire wall geometry for more accurate experimental correlations. This integrated approach sets a precedent for analyzing and applying real-time in-situ boron coating techniques in advanced tokamak scenarios, potentially extendable to ITER.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Capture of volatile RuO 4 from oxidized simulated used nuclear fuel solutions

Ruthenium is a challenging fission product in used nuclear fuel (UNF) reprocessing due to its complex redox chemistry, variable speciation in nitric acid, partial extractability, and volatility. This work presents a strategy for Ru removal based on the volatilization of RuO 4 using the strong oxidant sodium bismuthate, followed by RuO 2 deposition onto various substrates. Among the materials tested, polymer-based substrates such as polyolefin wax film (Parafilm®), exhibited superior performance, achieving up to near-quantitative Ru removal from solution. After dissolution of the substrate, 99.6% of the Ru was recovered as RuO 2 . The deposition mechanism onto the polyolefin wax film involves both physisorption and chemical reaction through oxidative cleavage of olefinic bonds within the polymer. In contrast, on inorganic substrates such as Al foil, RuO 4 undergoes incomplete surface adsorption and reduction, as confirmed by FTIR and XPS analyses. This approach remains effective under conditions of simulated oxidation of UNF solutions, selectively removing Ru while leaving other fission products in solution. As a result, capture of RuO 4 offers a practical and efficient strategy for ruthenium decontamination and recovery, offering a route for integration into existing UNF reprocessing flowsheets to enhance overall process safety and performance.

Ruthenium↗
DOE OSTI2022

Can Common Pool Resource Theory Catalyze Stakeholder-Driven Solutions to the Freshwater Salinization Syndrome?

Freshwater salinity is rising across many regions of the United States as well as globally, a phenomenon called the freshwater salinization syndrome (FSS). The FSS mobilizes organic carbon, nutrients, heavy metals, and other contaminants sequestered in soils and freshwater sediments, alters the structures and functions of soils, streams, and riparian ecosystems, threatens drinking water supplies, and undermines progress toward many of the United Nations Sustainable Development Goals. There is an urgent need to leverage the current understanding of salinization’s causes and consequences–in partnership with engineers, social scientists, policymakers, and other stakeholders–into locally tailored approaches for balancing our nation’s salt budget. In this feature, we propose that the FSS can be understood as a common pool resource problem and explore Nobel Laureate Elinor Ostrom’s social-ecological systems framework as an approach for identifying the conditions under which local actors may work collectively to manage the FSS in the absence of top-down regulatory controls. We adopt as a case study rising sodium concentrations in the Occoquan Reservoir, a critical water supply for up to one million residents in Northern Virginia (USA), to illustrate emerging impacts, underlying causes, possible solutions, and critical research needs.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Probing Active Sites in Cu x Pd y Cluster Catalysts by Machine-Learning-Assisted X-ray Absorption Spectroscopy

Size-selected clusters are important model catalysts because of their narrow size and compositional distributions, as well as enhanced activity and selectivity in many reactions. Still, their structure-activity relationships are, in general, elusive. The main reason is the difficulty in identifying and quantitatively characterizing the catalytic active site in the clusters when it is confined within subnanometric dimensions and under the continuous structural changes the clusters can undergo in reaction conditions. Using machine learning approaches for analysis of the operando X-ray absorption near-edge structure spectra, we obtained accurate speciation of the Cu x Pd y cluster types during the propane oxidation reaction and the structural information about each type. As a result, we elucidated the information about active species and relative roles of Cu and Pd in the clusters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Heterostructured Au–Ir Catalysts for Enhanced Oxygen Evolution Reaction

Electrochemical water splitting operated under acidic conditions provides a clean approach to generate hydrogen fuels. Currently, the sluggish kinetics of oxygen evolution reaction (OER) at the anode is a bottleneck limiting the acidic water splitting. Here, we report that the OER activity of Ir, one of the most commonly used OER catalysts, can be boosted by forming phase boundaries with Au. Mixed Au and Ir catalysts were synthesized on carbon paper electrodes, which underwent structural evolution under the OER environment to form an Au-Ir interface-rich structure. Compared with Ir catalyst, which requires an overpotential of ~393 mV to achieve a current density of 10 mA/cm 2 in 0.1 M HClO 4 electrolyte, the evolved Au-Ir catalyst shows a lower overpotential at ~351 mV. X-ray photoelectronic spectrum (XPS) study, in conjunction with electrochemical analysis on the surface-site-normalized activity, reveals that the improved OER performance is due to the presence of Au/Ir interfaces in the catalysts. In addition to Ir, the strategy of accelerating OER via Au/Ir interfaces has been further applied to IrCo, IrNi, and IrCu alloy catalysts. Here, with the broad applicability of the strategy demonstrated, this study opens a new route to design OER catalysts for efficient acidic water splitting.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Reduction of CO to Methanol with Recyclable Organic Hydrides

We report the reaction steps for the selective conversion of a transition metal carbonyl complex to a hydroxymethyl complex that releases methanol upon irradiation with visible light have been successfully quantified in acetonitrile solution with dihydrobenzimidazole organic hydride reductants. Dihydrobenzimidazole reductants have been shown to be inactive toward H 2 generation in the presence of a wide range of proton sources and have been regenerated electrochemically or photochemically. Specifically, the reaction of cis-[Ru(bpy) 2 (CO) 2 ] 2+ (bpy = 2,2'-bipyridine) with one equivalent of a dihydrobenzimidazole quantitatively yields a formyl complex, cis-[Ru(bpy) 2 (CO)(CHO)] + , and the corresponding benzimidazolium on a seconds time scale. Kinetic experiments revealed a first-order dependence on the benzimidazole hydride concentration and an unusually large kinetic isotope effect, inconsistent with direct hydride transfer and more likely to occur by an electron transfer-proton-coupled electron transfer (EΤ-PCET) or related mechanism. Further reduction/protonation of cis-[Ru(bpy) 2 (CO)(CHO)] + with two equivalents of the organic hydride yields the hydroxymethyl complex cis-[Ru(bpy) 2 (CO)(CH 2 OH)] + . Visible light excitation of cis-[Ru(bpy) 2 (CO)(CH 2 OH)] + in the presence of excess organic hydride was shown to yield free methanol. Identification and quantification of methanol as the sole CO reduction product was confirmed by 1 H NMR spectroscopy and gas chromatography. The high selectivity and mild reaction conditions suggest a viable approach for methanol production from CO, and from CO 2 through cascade catalysis, with renewable organic hydrides that bear similarities to Nature's NADPH/NADP + .

14 SOLAR ENERGY↗
DOE OSTI2020

Universal and versatile morphology engineering via hot fluorous solvent soaking for organic bulk heterojunction

After explosive growth of efficiency in organic solar cells (OSCs), achieving ideal morphology of bulk heterojunction remains crucial and challenging for advancing OSCs into consumer market. Herein, by utilizing the amphiphobic nature and temperature-dependent miscibility of fluorous solvent, hot fluorous solvent soaking method is developed to optimize the morphology with various donor/acceptor combinations including polymer/small-molecule, all-polymer and all-small-molecule systems. By immersing blend film into hot fluorous solvent which is utilized as liquid medium with better thermal conductivity, the molecular reorganization is accelerated. Furthermore, fluorous solvent can be miscible with the residue of chloroform and chloronaphthalene above upper critical solution temperature. This mixed solvent diffuses around inside the active layer and selectively promotes molecular reorganization, leading to optimized morphology. Compared to widely-used thermal annealing, this approach processed under mild conditions achieves superior photovoltaic performance, indicating the practicality and universality for morphological optimization in OSCs as well as other optoelectronic devices.

14 SOLAR ENERGY↗
DOE OSTI2022

In situ electrochemical recomposition of decomposed redox-active species in aqueous organic flow batteries

Aqueous organic redox flow batteries (AORFBs) offer a safe and potentially inexpensive solution to the problem of storing massive amounts of electricity produced from intermittent renewables. However, molecular decomposition is the major barrier preventing AORFBs from being commercialized. Structural modifications can improve molecular stability at the expense of increased synthetic cost and molecular weight. Utilizing 2,6-dihydroxy-anthraquinone (DHAQ), without further structural modification, we demonstrate that electrochemical regeneration could be a viable route to achieve low-cost, long-lifetime AORFBs. In situ (online) NMR and EPR and complementary electrochemical analyses reveal that decomposition compounds i.e., 2,6-dihydroxy-anthrone (DHA) and its tautomer, 2,6-dihydroxy-anthranol (DHAL), can be converted back to DHAQ in two steps: first DHA(L) 2- are oxidized to the dimer (DHA) 2 4- at - 0.32 V vs. SHE by one-electron transfer; subsequently, the (DHA) 2 4- is oxidized to DHAQ 2- at +0.57 V vs. SHE by three-electron transfer. Electrochemical regeneration rejuvenates not only DHAQ 2- , but also the positive electrolyte – rebalancing the states of charge of both electrolytes without introducing extra ions. We demonstrate the repeated capacity recovery with DHAQ | potassium ferro-/ferricyanide flow battery in basic conditions, and show the approach is also effective for anthraquinone-2,7-disulfonate in acid. Electrochemical regeneration strategies may extend the useful lifetime of many water-soluble organic molecules with anthraquinone core structures in electrochemical cells.

25 ENERGY STORAGE↗
DOE OSTI2020

Electronic band contraction induced low temperature methane activation on metal alloys

The catalytic conversion of methane under mild conditions is an appealing approach to selectively produce value-added products from natural gas. Catalysts which can chemisorb methane can potentially overcome challenges associated with its high stability and achieve facile activation. Although transition metals can activate C–H bonds, chemisorption and low-temperature conversion remain elusive on these surfaces. The broad electronic bands of metals can only weakly interact with the methane orbitals, in contrast to specific transition metal oxide and supported metal cluster surfaces which are now recognized to form methane σ-complexes. Here, we report methane chemisorption can, remarkably, occur on metal surfaces via electronic band contraction and localization from metal alloying. From a broad screening including single atom and intermetallic alloys in various substrates, we find early transition metals as promising metal solutes for methane chemisorption and low-temperature activation. These findings demonstrate a combinatorial diversity of possible candidates in earth abundant metal alloys with this attractive catalytic behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗