Search NASA⌕ Search

SEARCH · Search NASA

Results for “constant flux”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS2012

Comparison of Various Supersonic Turbine Tip Designs to Minimize Aerodynamic Loss and Tip Heating

The rotor tips of axial turbines experience high heat flux and are the cause of aerodynamic losses due to tip clearance flows, and in the case of supersonic tips, shocks. As stage loadings increase, the flow in the tip gap approaches and exceeds sonic conditions. This introduces effects such as shock-boundary layer interactions and choked flow that are not observed for subsonic tip flows that have been studied extensively in literature. This work simulates the tip clearance flow for a flat tip, a diverging tip gap and several contoured tips to assess the possibility of minimizing tip heat flux while maintaining a constant massflow from the pressure side to the suction side of the rotor, through the tip clearance. The Computational Fluid Dynamics (CFD) code GlennHT was used for the simulations. Due to the strong favorable pressure gradients the simulations assumed laminar conditions in the tip gap. The nominal tip gap width to height ratio for this study is 6.0. The Reynolds number of the flow is 2.4 x 10(exp 5) based on nominal tip width and exit velocity. A wavy wall design was found to reduce heat flux by 5 percent but suffered from an additional 6 percent in aerodynamic loss coefficient. Conventional tip recesses are found to perform far worse than a flat tip due to severe shock heating. Overall, the baseline flat tip was the second best performer. A diverging converging tip gap with a hole was found to be the best choice. Average tip heat flux was reduced by 37 percent and aerodynamic losses were cut by over 6 percent.

Shyam, Vikram↗
NASA NTRS2004

Effects of Heat Flux, Oxygen Concentration and Glass Fiber Volume Fraction on Pyrolysate Mass Flux from Composite Solids

Experimental work on the effects of heat flux, oxygen concentration and glass fiber volume fraction on pyrolysate mass flux from samples of polypropylene/glass fiber composite (PP/G) is underway. The research is conducted as part of a larger project to develop a test methodology for flammability of materials, particularly composites, in the microgravity and variable oxygen concentration environment of spacecraft and space structures. Samples of PP/G sized at 30x30x10 mm are flush mounted in a flow tunnel, which provides a flow of oxidizer over the surface of the samples at a fixed value of 1 m/s and oxygen concentrations varying between 18 and 30%. Each sample is exposed to a constant external radiant heat flux at a given value, which varies between tests from 10 to 24 kW/m2. Continuous sample mass loss and surface temperature measurements are recorded for each test. Some tests are conducted with an igniter and some are not. In the former case, the research goal is to quantify the critical mass flux at ignition for the various environmental and material conditions described above. The later case generates a wider range of mass flux rates than those seen prior to ignition, providing an opportunity to examine the protective effects of blowing on oxidative pyrolysis and heating of the surface. Graphs of surface temperature and sample mass loss vs. time for samples of 30% PPG at oxygen concentrations of 18 and 21% are presented in the figures below. These figures give a clear indication of the lower pyrolysis rate and extended time to ignition that accompany a lower oxygen concentration. Analysis of the mass flux rate at the time of ignition gives good repeatability but requires further work to provide a clear indication of mass flux trends accompanying changes in environmental and material properties.

Rich, D. B.↗
NASA NTRS2004

Effects of Heat Flux, Oxygen Concentration and Glass Fiber Volume Fraction on Pyrolysate Mass Flux from Composite Solids

Experimental work on the effects of heat flux, oxygen concentration and glass fiber volume fraction on pyrolysate mass flux from samples of polypropylene/glass fiber composite (PP/G) is underway. The research is conducted as part of a larger project to develop a test methodology for flammability of materials, particularly composites, in the microgravity and variable oxygen concentration environment of spacecraft and space structures. Samples of PP/G sized at 30 x 30 x 10 mm are flush mounted in a flow tunnel, which provides a flow of oxidizer over the surface of the samples at a fixed value of 1 m/s and oxygen concentrations varying between 18 and 30%. Each sample is exposed to a constant external radiant heat flux at a given value, which varies between tests from 10 to 24 kW/sq m. Continuous sample mass loss and surface temperature measurements are recorded for each test. Some tests are conducted with an igniter and some are not. In the former case, the research goal is to quantify the critical mass flux at ignition for the various environmental and material conditions described above. The later case generates a wider range of mass flux rates than those seen prior to ignition, providing an opportunity to examine the protective effects of blowing on oxidative pyrolysis and heating of the surface. Graphs of surface temperature and sample mass loss vs. time for samples of 30% PPG at oxygen concentrations of 18 and 21% are presented in the figures below. These figures give a clear indication of the lower pyrolysis rate and extended time to ignition that accompany a lower oxygen concentration. Analysis of the mass flux rate at the time of ignition gives good repeatability but requires further work to provide a clear indication of mass flux trends accompanying changes in environmental and material properties.

Rich, D. B.↗
NASA NTRS1975

Solar flux and its variations

Data are presented on the solar irradiance as derived from a number of sources. An attempt was made to bring these data onto a uniform scale. Summation of fluxes at all wavelengths yields a figure of 1357.826 for the solar constant. Estimates are made of the solar flux variations due to flares, active regions (slowly varying component), 27-day period, and the 11-yr cycle. Solar activity does not produce a significant variation in the value of the solar constant. Variations in the X-ray and EUV portions of the solar flux may be several orders of magnitude during solar activity, especially at times of major flares. It is established that these short wavelength flux enhancements cause significant changes in the terrestrial ionosphere.

Smith, E. V. P.↗
NASA NTRS2020

Simulation and Modeling of Cold-Wall Hypersonic Turbulent Boundary Layers on Flat Plate

Direct numerical simulations (DNS) of flat-plate, zero-pressure-gradient turbulent boundary layers are presented for nominal freestream Mach numbers of 11 and 14 and a highly cooled wall (wall-to-recovery temperature of approximately 0.2). The flow conditions of the DNS are representative of the experimental data for a Mach 11.1 turbulent boundary layer on a flat plate that was tested at Calspan–University of Buffalo Research Center (CUBRC) and the operational conditions of the AEDC Hypervelocity Tunnel No. 9 at Mach 14. The wall shear stress and turbulent heat flux predicted by DNS show good comparisons with those measured at CUBRC and those modeled with a Baldwin-Lomax model. The generated DNS database extends the range of Reynolds numbers from those typical of previous DNS studies for hypersonic boundary-layer flows and confirms the validity of Morkovin’s hypothesis within the relatively broader range of Reynolds numbers considered in this study. A priori assessment of turbulent heat flux models with DNS data shows that the algebraic energy flux (AEF) formulation gives better predictions of the streamwise turbulent heat flux than the commonly used constant turbulent Prandtl number model while both models give similarly good predictions of the wall-normal turbulent heat flux. A posteriori assessment shows that the AEF model improves the prediction of the temperature profiles while keeping a good prediction of the velocity field.

Junji Huang↗
NASA NTRS1974

Absolute radiometry and the solar constant

A series of active cavity radiometers (ACRs) are described which have been developed as standard detectors for the accurate measurement of irradiance in absolute units. It is noted that the ACR is an electrical substitution calorimeter, is designed for automatic remote operation in any environment, and can make irradiance measurements in the range from low-level IR fluxes up to 30 solar constants with small absolute uncertainty. The instrument operates in a differential mode by chopping the radiant flux to be measured at a slow rate, and irradiance is determined from two electrical power measurements together with the instrumental constant. Results are reported for measurements of the solar constant with two types of ACRs. The more accurate measurement yielded a value of 136.6 plus or minus 0.7 mW/sq cm (1.958 plus or minus 0.010 cal/sq cm per min).

Willson, R. C.↗
NASA NTRS1975

Earth radiation budget measurement from a spinning satellite: Conceptual design of detectors

The conceptual design, sensor characteristics, sensor performance and accuracy, and spacecraft and orbital requirements for a spinning wide-field-of-view earth energy budget detector were investigated. The scientific requirements for measurement of the earth's radiative energy budget are presented. Other topics discussed include the observing system concept, solar constant radiometer design, plane flux wide FOV sensor design, fast active cavity theory, fast active cavity design and error analysis, thermopile detectors as an alternative, pre-flight and in-flight calibration plane, system error summary, and interface requirements.

Sromovsky, L. A.↗
NASA NTRS1976

MX 1313+29 - A compact source of very low energy X-rays in Coma Berenices

A compact X-ray source near the North Galactic Pole has been detected with the low-energy X-ray telescope aboard the SAS-3 satellite. The spectral temperature of the source is less than 1 million K, and the energy flux at the earth is 3 by 10 to the -10th power erg/sq cm/sec above 0.1 keV. The flux appeared to be constant both on short time scales (10-1000 s), and over the interval from the first SAS-3 observation (June 12, 1975) to the latest (July 15, 1975). The possible identification of this source with the hot white dwarf HZ 43 is discussed.

Hearn, D. R.↗
NASA NTRS1975

Exospheric hydrogen above St-Santin /France/

The temperature and hydrogen concentration of the exosphere was determined using incoherent scatter measurements performed above St. Santin from 1969 to 1972. The hydrogen concentration was deduced from measurements of the number density of positive hydrogen and oxygen ions. A statistical analysis is given of the hydrogen concentration as a function of the exospheric temperature and the diurnal variation of the hydrogen concentration is investigated for a few selected days of good quality observation. The data averaged with respect to the exospheric temperature without consideration of the local time exhibits a distribution consistent with a constant effective Jeans escape flux of about 9 x 10 to the 7 cu cm/s. The local time variation exhibits a maximum to minimum concentration ratio of at least 3.5.

Derieux, A.↗
NASA NTRS1983

A multi-spacecraft study of the coronal and interplanetary transport of solar cosmic rays. I, II

The analysis and interpretation of the multiple-spacecraft observations of a collection of flare events in six energy bands between 3 and 60 MeV/nucleon are presented. The longitudinal and radial dependence of the times of maximum flux, the relative maximum fluxes, and the decay constants, are determined; and the propagation model is compared with a simplified single-spacecraft model. The analytical model developed accounts for the effects of diffusion, convection, adiabatic deceleration, and corotation. The intensity time profiles are calculated for hypothetical spacecraft spaced at 60-deg longitude intervals between -120 and 120 deg. It is concluded that the large value of k(IP) (greater than or equal to 6 x 10 to the 21st sq cm/s) indicates the nonnegligibility of focused diffusion in the interplanetary modeling of these events.

Mcguire, R. E.↗
NASA NTRS1986

Comment on the letter 'On the influx of small comets into the earth's upper atmosphere. II - Interpretation'

A critical comment is made on the proposal by Frank et al. (1986) that a flux of small comets constantly impacts the earth's atmosphere. It is argued that the interpretation of the 'atmospheric holes' in terms of such an influx is difficult to reconcile with the fact that the lunar seismic network set up during the Apollo project did not detect such an influx. Frank et al. reply that this discrepancy may be traced to the insensitivity of the lunar seismic stations for the detection of the impacts of tenuous, weakly bound comets relative to those of dense, stony meteoroids.

Nakamura, Yosio↗
NASA NTRS1988

Time-dependent polar wind modeling

In the presence of a strong magnetic field (such as the geomagnetic field) the plasma tends to flow along the magnetic-field lines; therefore, in most ionospheric flow calculations the use of the gyrotropic approximation is justified. Here, it is shown that the gyrotropic 20-moment approximation is equivalent to the gyrotropic 16-moment approximation. Consideration is then given to return-current-generated polar wind transients. Ionospheric return currents generate significant downward heavy ion flows in the topside ionosphere with peak values well exceeding 10 to the 8th/sq cm sec. When the return current ceases, the polar ionosphere rapidly returns to its previous equilibrium state. During the recovery phase of the return-current event, an upward-propagating heavy-ion transient is formed, which is mainly characterized by a relatively short O(+) upwelling event. The H(+) escape flux remains a relatively constant (within 10-20 percent) during field-aligned-current events.

Gombosi, T. I.↗
NASA NTRS1991

IRAS detection of very cold dust in the Lynds 134 cloud complex

IRAS maps at 60 and 100 microns of the complex of dark clouds containing L1345, L183, and L1780 are presented and discussed. Extended regions are apparent where the 60 micron emission is very low compared to the 100 micron emission. The 60-100 micron flux ratio has a constant value of 0.2 in the outer diffuse parts of the clouds but suddenly drops to less than 0.03 in the opaque cloud centers. A geometrical model is used to show that the drop occurs in a narrow transition layer that has not been resolved by IRAS. The observations provide direct evidence for dust temperatures colder than 15 K in dark clouds. A number of 60 micron-deficient regions are defined using the quantity Delta I(100) = I(60)/Theta, where Theta is the ratio I(60)/I(100) in the diffuse parts of the complex. Delta I(100) is highly proportional to extinction and (C-13)O column density. The relationships indicate that the dust temperature must be constant over a large fraction of the volume sampled by Delta I(100). An upper limit of 4.8 g/sq cm is obtained for the mass absorption coefficient of dust at 100 microns.

Laureijs, R. J.↗
NASA NTRS1993

Interacting scales and energy transfer in isotropic turbulence

The dependence of the energy transfer process on the disparity of the interacting scales is investigated in the inertial and far-dissipation ranges of isotropic turbulence. The strategy for generating the simulated flow fields and the choice of a disparity parameter to characterize the scaling of the interactions is discussed. The inertial range is found to be dominated by relatively local interactions, in agreement with the Kolmogorov assumption. The far-dissipation is found to be dominated by relatively non-local interactions, supporting the classical notion that the far-dissipation range is slaved to the Kolmogorov scales. The measured energy transfer is compared with the classical models of Heisenberg, Obukhov, and the more detailed analysis of Tennekes and Lumley. The energy transfer statistics measured in the numerically simulated flows are found to be nearly self-similar for wave numbers in the inertial range. Using the self-similar form measured within the limited scale range of the simulation, an 'ideal' energy transfer function and the corresponding energy flux rate for an inertial range of infinite extent are constructed. From this flux rate, the Kolmogorov constant is calculated to be 1.5, in excellent agreement with experiments.

Zhou, YE↗
NASA NTRS1997

Determination of Coronal Magnetic Fields from Vector Magnetograms

During the course of the present contract we developed an 'evolutionary technique' for the determination of force-free coronal magnetic fields from vector magnetograph observations. The method can successfully generate nonlinear force- free fields (with non-constant-a) that match vector magnetograms. We demonstrated that it is possible to determine coronal magnetic fields from photospheric measurements, and we applied it to vector magnetograms of active regions. We have also studied theoretical models of coronal fields that lead to disruptions. Specifically, we have demonstrated that the determination of force-free fields from exact boundary data is a well-posed mathematical problem, by verifying that the computed coronal field agrees with an analytic force-free field when boundary data for the analytic field are used; demonstrated that it is possible to determine active-region coronal magnetic fields from photospheric measurements, by computing the coronal field above active region 5747 on 20 October 1989, AR6919 on 15 November 1991, and AR7260 on 18 August 1992, from data taken with the Stokes Polarimeter at Mees Solar Observatory, University of Hawaii; started to analyze active region 7201 on 19 June 1992 using measurements made with the Advanced Stokes Polarimeter at NSO/Sac Peak; investigated the effects of imperfections in the photospheric data on the computed coronal magnetic field; documented the coronal field structure of AR5747 and compared it to the morphology of footpoint emission in a flare, showing that the 'high- pressure' H-alpha footpoints are connected by coronal field lines; shown that the variation of magnetic field strength along current-carrying field lines is significantly different from the variation in a potential field, and that the resulting near-constant area of elementary flux tubes is consistent with observations; begun to develop realistic models of coronal fields which can be used to study flare trigger mechanisms; demonstrated that magnetic nonequilibrium can disrupt sheared coronal arcades, and that helmet streamers can disrupt, leading to coronal mass ejections. Our model has significantly extended the realism with which the coronal magnetic field can be inferred from actual observations. In a subsequent contract awarded by NASA, we have continued to apply and improve the evolutionary technique, to study the physical properties of active regions, and to develop theoretical models of magnetic fields.

Mikic, Zoran↗
NASA NTRS2005

X-Ray Bursts from the Transient Magnetar Candidate XTE J1810-197

We have discovered four X-ray bursts, recorded with the Rossi X-ray Timing Explorer Proportional Counter Array between 2003 September and 2004 April, that we show to originate from the transient magnetar candidate XTE 51810-197. The burst morphologies consist of a short spike or multiple spikes lasting approx. 1 s each followed by extended tails of emission where the pulsed flux from XTE 51810-197 is significantly higher. The burst spikes are likely correlated with the pulse maxima, having a chance probability of a random phase distribution of 0.4%. The burst spectra are best fit to a blackbody with temperatures 4-8 keV, considerably harder than the persistent X-ray emission. During the X-ray tails following these bursts, the temperature rapidly cools as the flux declines, maintaining a constant emitting radius after the initial burst peak. The temporal and spectral characteristics of these bursts closely resemble the bursts seen from 1E 1048.1-5937 and a subset of the bursts detected from 1E 2259+586, thus establishing XTE J1810-197 as a magnetar candidate. The bursts detected from these three objects are sufficiently similar to one another, yet si,g&cantly differe2t from those seen from soft gamma repeaters, that they likely represent a new class of bursts from magnetar candidates exclusive (thus far) to the anomalous X-ray pulsar-like sources.

Kouveliotou, Chryssa↗
NASA NTRS2010

Ultrasonic Characterization of Interfaces in Composite Bonds

The inverse determination of imperfect interfaces from reflection spectra of normal and oblique incident ultrasonic waves in adhesive bonds of multidirectional composites is investigated. The oblique measurements are complicated by the highly dispersed nature of oblique wave spectra at frequencies above 3MHz. Different strategies for bond property reconstruction, including a modulation method, are discussed. The relation of measured interfacial spring density to the physico-chemical model of a composite interface described by polymer molecular bonds to emulate loss of molecular strength on an adhesive composite interface is discussed. This potentially relates the interfacial (adhesion) strength (number of bonds at the adhesive substrate interface) to the spring constant (stiffness) area density (flux), which is an ultrasonically measurable parameter.

Wang, N.↗
NASA NTRS2022

Writhed Analytical Magnetic Flux Rope Model

Observations of magnetic clouds, within interplanetary coronal mass ejections (ICMEs), are often well described by flux rope models. Most of these assume either a cylindrical or toroidal geometry. In some cases, these models are also capable of accounting for non-axisymmetric cross-sections but they generally all assume axial invariance. It can be expected that any ICME, and its flux rope, will be deformed along its axis due to influences such as the solar wind. In this work, we aim to develop a writhed analytical magnetic flux rope model which would allow us to analytically describe a flux rope structure with varying curvature and torsion so that we are no longer constrained to a cylindrical or toroidal geometry. In this first iteration of our model we will solely focus on a circular cross-section of constant size. We describe our flux rope geometry in terms of a parametrized flux rope axis and a parallel transport frame. We derive expressions for the axial and poloidal magnetic field components under the assumption that the total axial magnetic flux is conserved. We find an entire class of possible solutions, which differ by the choice of integration constants, and present the results for a specific example. In general, we find that the twist of the magnetic field locally changes when the geometry deviates from a cylinder or torus. This new approach also allows us to generate completely new types of in situ magnetic field profiles which strongly deviate from those generated by cylindrical or toroidal models.

A. J. Weiss↗