SEARCH · Search NASA

Results for “continuous processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

All sources NASA NTRS DOE OSTI

NASA NTRS1987

Leadership and America's future in space

In response to growing concern over the posture and long-term direction of the U.S. civilian space program, a task group was formed to define potential U.S. space initiatives, and to evaluate them in light of the current space program and the nation's desire to regain and retain space leadership. The objectives were to energize a discussion of the long-term goals of the civilian space program and to begin to investigate overall strategies to direct that program to a position of leadership. Four initiatives were identified: mission to planet Earth; exploration of the solar system; outpost on the Moon, and humans to Mars. All four initiatives were developed in detail, and the implications and requirements of each was assessed. The long-term goals, current posturing required to attain these goals, and the need for a continuing process to define, refine, and assess both the goals and the strategy to achieve them are discussed.

Sally K Ride↗

NASA NTRS1986

Integrating automated structured analysis and design with Ada programming support environments

Ada Programming Support Environments (APSE) include many powerful tools that address the implementation of Ada code. These tools do not address the entire software development process. Structured analysis is a methodology that addresses the creation of complete and accurate system specifications. Structured design takes a specification and derives a plan to decompose the system subcomponents, and provides heuristics to optimize the software design to minimize errors and maintenance. It can also produce the creation of useable modules. Studies have shown that most software errors result from poor system specifications, and that these errors also become more expensive to fix as the development process continues. Structured analysis and design help to uncover error in the early stages of development. The APSE tools help to insure that the code produced is correct, and aid in finding obscure coding errors. However, they do not have the capability to detect errors in specifications or to detect poor designs. An automated system for structured analysis and design TEAMWORK, which can be integrated with an APSE to support software systems development from specification through implementation is described. These tools completement each other to help developers improve quality and productivity, as well as to reduce development and maintenance costs. Complete system documentation and reusable code also resultss from the use of these tools. Integrating an APSE with automated tools for structured analysis and design provide capabilities and advantages beyond those realized with any of these systems used by themselves.

Hecht, Alan↗

NASA NTRS1989

Interfacing modules for integrating discipline specific structural mechanics codes

An outline of the organization and capabilities of the Engine Structures Computational Simulator (Simulator) at NASA Lewis Research Center is given. One of the goals of the research at Lewis is to integrate various discipline specific structural mechanics codes into a software system which can be brought to bear effectively on a wide range of engineering problems. This system must possess the qualities of being effective and efficient while still remaining user friendly. The simulator was initially designed for the finite element simulation of gas jet engine components. Currently, the simulator has been restricted to only the analysis of high pressure turbine blades and the accompanying rotor assembly, although the current installation can be expanded for other applications. The simulator presently assists the user throughout its procedures by performing information management tasks, executing external support tasks, organizing analysis modules and executing these modules in the user defined order while maintaining processing continuity.

Endres, Ned M.↗

NASA NTRS1989

Creation of current filaments in the solar corona

It has been suggested that the solar corona is heated by the dissipation of electric currents. The low value of the resistivity requires the magnetic field to have structure at very small length scales if this mechanism is to work. In this paper it is demonstrated that the coronal magnetic field acquires small-scale structure through the braiding produced by smooth, randomly phased, photospheric flows. The current density develops a filamentary structure and grows exponentially in time. Nonlinear processes in the ideal magnetohydrodynamic equations produce a cascade effect, in which the structure introduced by the flow at large length scales is transferred to smaller scales. If this process continues down to the resistive dissipation length scale, it would provide an effective mechanism for coronal heating.

Mikic, Z.↗

NASA NTRS1989

Photodissociation of CO in the thermosphere of Venus

Recent investigations of CO photoabsorption demonstrate that photodissociation longward of the ionization threshold at 88.5 nm occurs primarily through line absorptions rather than continuous processes. High-resolution photoabsorption cross sections for CO at rotational temperatures near 250 K have been constructed from the improved data on dissociating transitions. The effects of the new cross sections on the rate of solar photodissociation of CO in the thermosphere of Venus are examined, and the results are compared to values obtained with the lower resolution cross sections available previously. It is found that the photodissociation profile peaks slightly higher in the atmosphere and the peak value and integrated total rate both decrease by about a factor of two.

Fox, J. L.↗

NASA NTRS1988

Thermoplastic coated carbon fibers for textile preforms

A continuous process for producing prepreg from carbon fiber and thermoplastic matrix is described. After the tow has been spread using a pneumatic device, the process utilizes a fluidized bed to apply thermoplastic powder to the bundle. Finally, direct electrical heating of the coated fiber tow melts the polymer on the individual fibers, creating a uniform and extremely flexible prepreg. The efficiency of the process was evaluated during initial trials in which a thermoplastic polyimide, LaRC-TPI, was applied to T-300, 3K (3000 filament) carbon fiber tow. The physical properties of unidirectional composite specimens fabricated from this prepreg were measured, and the matrix uniformity and void content of the samples was determined. The results of these evaluations are detailed and discussed.

Allen, L. E.↗

NASA NTRS1990

Analysis of quality costs - A critical element in CIM

Computer integrated manufacturing (CIM) is a cohesive database of manufacturing information, providing an opportunity to track quality costs and measure progress toward their reduction. This paper presents the quality cost concept as an approach to identify, measure and reduce quality costs while improving quality within CIM. The effect of advanced failure prevention methodologies, such as continuous process improvement and the quality engineering methods of Taguchi, on quality and cost, is discussed.

Unal, Resit↗

NASA NTRS1992

Unsteady separation in sharp fin-induced shock wave/turbulent boundary layer interaction at Mach 5

Fluctuating wall-pressure measurements are made in shock-wave/turbulent-boundary-layer interactions generated by sharp/unswept fins at angles of attack of 16, 18, 20, 22, 24, 26, and 28 degrees at Mach 5. The experiment was conducted under approximately adiabatic wall temperature conditions. The mean and rms pressure distributions can be collapsed in conical coordinates. The wall-pressure signal near separation is intermittent for all angles of attack (16-28 deg) and is qualitatively similar to that measured in unswept flows. However, the shock frequencies are higher - about 5 kHz compared to 0.5-1 kHz. Over the range of sweepbacks examined, from 25-55 deg, the spectral content of the fluctuating pressures does not change. Thus, the increase in separation-shock frequency from 1 to 5 kHz occurs at lower interaction sweepback and is not a continuous process with increasing sweepback. Power spectra at the position of maximum rms in the intermittent region for interactions in different incoming boundary layers have the same center frequency. The maximum rms in the intermittent region correlates with interaction sweepback, not with overall inviscid pressure rise.

Schmisseur, J. D.↗

NASA NTRS1992

An alternate method for achieving temperature control in the -130 C to 75 C range

Thermal vacuum testing often requires temperature control of chamber shrouds and heat exchangers within the -130 C to 75 C range. There are two conventional methods which are normally employed to achieve control through this intermediate temperature range: (1) single-pass flow where control is achieved by alternately pulsing hot gaseous nitrogen (GN2) and cold LN2 into the feed line to yield the setpoint temperature; and (2) closed-loop circulation where control is achieved by either electrically heating or LN2 cooling the circulating GN2 to yield the setpoint temperature. A third method, using a mass flow ratio controller along with modulating control valves on GN2 and LN2 lines, provides excellent control but equipment for this method is expensive and cost-prohibitive for all but long-term continuous processes. The single-pass method provides marginal control and can result in unexpected overcooling of the test article from even a short pulse of LN2. The closed-loop circulation method provides excellent control but requires an expensive blower capable of operating at elevated pressures and cryogenic temperatures. Where precise control is needed (plus or minus 2 C), single-pass flow systems typically have not provided the precision required, primarily because of overcooling temperature excursions. Where several individual circuits are to be controlled at different temperatures, the use of expensive cryogenic blowers for each circuit is also cost-prohibitive, especially for short duration of one-of-a-kind tests. At JPL, a variant of the single-pass method was developed that was shown to provide precise temperature control in the -130 C to 75 C range while exhibiting minimal setpoint overshoot during temperature transitions. This alternate method uses a commercially available temperature controller along with a GN2/LN2 mixer to dampen the amplitude of cold temperature spikes caused by LN2 pulsing. The design of the GN2/LN2 mixer, the overall control system configuration, the operational procedure, and the prototype system test results are described.

Johnson, Kenneth R.↗

NASA NTRS1992

The Software Engineering Laboratory: An operational software experience factory

For 15 years, the Software Engineering Laboratory (SEL) has been carrying out studies and experiments for the purpose of understanding, assessing, and improving software and software processes within a production software development environment at NASA/GSFC. The SEL comprises three major organizations: (1) NASA/GSFC, Flight Dynamics Division; (2) University of Maryland, Department of Computer Science; and (3) Computer Sciences Corporation, Flight Dynamics Technology Group. These organizations have jointly carried out several hundred software studies, producing hundreds of reports, papers, and documents, all of which describe some aspect of the software engineering technology that was analyzed in the flight dynamics environment at NASA. The studies range from small, controlled experiments (such as analyzing the effectiveness of code reading versus that of functional testing) to large, multiple project studies (such as assessing the impacts of Ada on a production environment). The organization's driving goal is to improve the software process continually, so that sustained improvement may be observed in the resulting products. This paper discusses the SEL as a functioning example of an operational software experience factory and summarizes the characteristics of and major lessons learned from 15 years of SEL operations.

Basili, Victor R.↗

NASA NTRS1993

Approximation paper, part 1

In this paper we discuss approximations between neural nets, fuzzy expert systems, fuzzy controllers, and continuous processes.

Buckley, J. J.↗

NASA NTRS1992

Prediction of Chemical Vapor Deposition Rates on Monofilaments and Its Implications for Fiber Properties

Deposition rates are predicted in a cylindrical upflow reactor designed for chemical vapor deposition (CVD) on monofilaments. Deposition of silicon from silane in a hydrogen carrier gas is chosen as a relevant example. The effects of gas and surface chemistry are studied in a two-dimensional axisymmetric flow field for this chemically well-studied system. Model predictions are compared to experimental CVD rate measurements. The differences in some physical and chemical phenomena between such small diameter (about 150 microns) fiber substrates and other typical CVD substrates are highlighted. The influence of the Soret mass transport mechanism is determined to be extraordinarily significant. The difficulties associated with the accurate measurement and control of the fiber temperature are discussed. Model prediction sensitivities are investigated with respect to fiber temperatures, fiber radii, Soret transport, and chemical kinetic parameters. The implications of the predicted instantaneous rates are discussed relative to the desired fiber properties for both the batch and the continuous processes.

Gokoglu, S. A.↗

NASA NTRS1993

Infrared and optical imaging of IRAS sources with CO outflow - A snapshot of early star formation

We present multiband imaging of three IRAS sources associated with CO molecular outflows. We find stellar density enhancements around all three IRAS sources. Optical and near-IR photometry indicates that at least 60 percent of the near-IR sources in the vicinity of the IRAS sources are pre-main-sequence stars. Using the photometric data at nbL and M, we are able to identify candidates for the near-IR counterparts of the IRAS sources. We also find that (1) the spectral energy distribution of the deeply embedded sources could be complicated by source confusion and scattered light from the young stellar objects; (2) star formation in the vicinity of the IRAS sources is a continuous process with an age span of 0.5-3 Myr; and (3) stellar density enhancement is probably a phenomenon found at the earliest stage of star formation.

Chen, H.↗

NASA NTRS1992

Pulse-Timing Studies of X Ray Pulsars

The pulse-timing projects supported by NASA Grant NAG8-695 were motivated in large part by our long-standing interest in the physics of rotating neutron stars and particularly the variations in rotation due to internal and external fluctuating torques. For accretion-powered pulsars, observed as compact galactic X-ray sources, our work has been motivated by questions regarding the physics of matter accretion, mass transfer, and mass loss in these X-ray binary systems. For rotation-powered pulsars using X-ray, optical, and radio observations, we have examined the internal structure of neutron stars and mechanisms for secular spin-down. These issues are still central to the continuing process of understanding the complex behavior of these fascinating systems. The work supported by this grant is based mainly on Ginga observations of three pulsating X-ray sources. We observed two of these sources (Her X-1 and SMC X-1) within the framework of a NASA-ISAS program for U.S.-Japan collaborations to obtain and analyze Ginga observations. In addition, we joined with members of the Ginga team to apply our pulse-timing methods to PSR 0540-69 data obtained as a collateral benefit of the regular monitoring by Ginga of SN 1987A. In addition to these Ginga observations, there exist other relevant data on all three of these sources. The direction of our investigations has been affected by the necessity of including these supporting data in our analyses, and setting up the necessary collaborations has sometimes entailed extra work that was not anticipated in our proposals. Indeed, we have often taken the initiative in establishing these joint projects.

Deeter, John E.↗

NASA NTRS1993

Mission operations and command assurance: Instilling quality into flight operations

Mission Operations and Command Assurance (MO&CA) is a Total Quality Management (TQM) task on JPL projects to instill quality in flight mission operations. From a system engineering view, MO&CA facilitates communication and problem-solving among flight teams and provides continuous process improvement to reduce the probability of radiating incorrect commands to a spacecraft. The MO&CA task has evolved from participating as a member of the spacecraft team to an independent team reporting directly to flight project management and providing system level assurance. JPL flight projects have benefited significantly from MO&CA's effort to contain risk and prevent rather than rework errors. MO&CA's ability to provide direct transfer of knowledge allows new projects to benefit from previous and ongoing flight experience.

Welz, Linda L.↗

NASA NTRS1994

Mission operations and command assurance: Flight operations quality improvements

Mission Operations and Command Assurance (MO&CA) is a Total Quality Management (TQM) task on JPL projects to instill quality in flight mission operations. From a system engineering view, MO&CA facilitates communication and problem-solving among flight teams and provides continuous solving among flight teams and provides continuous process improvement to reduce risk in mission operations by addressing human factors. The MO&CA task has evolved from participating as a member of the spacecraft team, to an independent team reporting directly to flight project management and providing system level assurance. JPL flight projects have benefited significantly from MO&CA's effort to contain risk and prevent rather than rework errors. MO&CA's ability to provide direct transfer of knowledge allows new projects to benefit from previous and ongoing flight experience.

Welz, Linda L.↗

NASA NTRS1993

Mission operations and command assurance - Automating an operations TQM task

A long-term program is in progress at JPL to reduce cost and risk of mission operations through defect prevention and error management. A major element of this program, Mission Operations and Command Assurance (MO&CA), provides a system level function on flight projects to instill quality in mission operations. MO&CA embodies the total quality management TQM principle of continuous process improvement (CPI) and uses CPI in applying automation to mission operations to reduce risk and costs. MO&CA has led efforts to apply and has implemented automation in areas that impact the daily flight project work environment including Incident Surprise Anomaly tracking and reporting; command data verification, tracking and reporting; and command support data usage. MO&CA's future work in automation will take into account that future mission operations systems must be designed to avoid increasing error through the introduction of automation, while adapting to the demands of smaller flight teams.

Welz, Linda↗

NASA NTRS1993

Thermodynamic balance of three-dimensional stratospheric winds derived from a data assimilation procedure

The NASA/Goddard three-dimensional chemistry and transport model is driven by winds from a stratospheric data assimilation system. Synoptic- and planetary-scale patterns, apparent in satellite observations of trace constituents, are successfully reproduced for seasonal integrations. As model integrations proceed, however, the quality of simulations decreases, and systematic differences between calculation and measurement appear. The differences are explained by examining the zonal-mean residual circulation. The vertical velocity w-bar (sup star) is calculated two ways: (1) from the diabatic heating rates and temperature tendency and (2) from the Eulerian vertical velocity and the horizontal eddy heat flux convergence. The results from these calculations differ substantially. Periodic insertion of observational data during the assimilation process continually shocks the general circulation model and produces these differences, which leads to an overestimate of the mean vertical heat and cconstituent transport. Such differences are expected to be general to all data assimilation products. This interpretation is corroborated by two-dimensional (2D) model calculations. When w-bar(sup star) is calculated from (2), the 2D ozone evolution is unrealistic and qualitatively similar to the 3D model simulation. The 2D ozone evolution is reasonable when w-bar (sup star) from (1).

Weaver, Clark J.↗