Search NASA⌕ Search

SEARCH · Search NASA

Results for “control electronics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Three-phase Four-leg Inverter LabVIEW FPGA Control Code [SWR-16-26]

In the area of power electronics control, Field Programmable Gate Arrays (FPGAs) have the capability to outperform their Digital Signal Processor (DSP) counterparts due to the FPGA’s ability to implement true parallel processing and therefore facilitate higher switching frequencies, higher control bandwidth, and/or enhanced functionality. National Instruments (NI) has developed two platforms, Compact RIO (cRIO) and Single Board RIO (sbRIO), which combine a real-time processor with an FPGA. The FPGA can be programmed with a subset of the well-known LabVIEW graphical programming language. The use of cRIO and sbRIO for power electronics control has developed over the last few years to include control of three-phase inverters. Most three-phase inverter topologies include three switching legs. The addition of a fourth-leg to natively generate the neutral connection allows the inverter to serve single-phase loads in a microgrid or stand-alone power system and to balance the three-phase voltages in the presence of significant load imbalance. However, the control of a four-leg inverter is much more complex. In particular, instead of standard two-dimensional space vector modulation (SVM), the inverter requires three-dimensional space vector modulation (3D-SVM). The candidate software implements complete control algorithms in LabVIEW FPGA for a three-phase four-leg inverter. The software includes feedback control loops, three-dimensional space vector modulation gate-drive algorithms, advanced alarm handling capabilities, contactor control, power measurements, and debugging and tuning tools. The feedback control loops allow inverter operation in AC voltage control, AC current control, or DC bus voltage control modes based on external mode selection by a user or supervisory controller. The software includes the ability to synchronize its AC output to the grid or other voltage-source before connection. The software also includes provisions to allow inverter operation in parallel with other voltage regulating devices on the AC or DC buses. This flexibility allows the Inverter to operate as a stand-alone voltage source, connected to the grid, or in parallel with other controllable voltage sources as part of a microgrid or remote power system. In addition, as the inverter is expected to operate under severe unbalanced conditions, the software includes algorithms to accurately compute real and reactive power for each phase based on definitions provided in the IEEE Standard 1459: IEEE Standard Definitions for the Measurement of Electric Power Quantities Under Sinusoidal, Nonsinusoidal, Balanced, or Unbalanced Conditions. Finally, the software includes code to output analog signals for debugging and for tuning of control loops. The software fits on the Xilinx Virtex V LX110 FPGA embedded in the NI cRIO-9118 FPGA chassis, and with a 40 MHz base clock, supports a modulation update rate of 40 MHz, user-settable switching frequencies and synchronized control loop update rates of tens of kHz, and reference waveform generation, including Phase Lock Loop (PLL), update rate of 100 kHz.

Martin, Gregory↗

Controlling Hot Electrons by Wave Amplification and Decay in Compressing Plasma

Through particle-in-cell simulations, it is demonstrated that a part of the mechanical energy of compressing plasma can be controllably transferred to hot electrons by preseeding the plasma with a Langmuir wave that is compressed together with the medium. Initially, a wave is undamped, so it is amplified under compression due to plasmon conservation. Later, as the phase velocity also changes under compression, Landau damping can be induced at a predetermined instant of time. Then the wave energy is transferred to hot electrons, shaping the particle distribution over a controllable velocity interval, which is wider than that in stationary plasma. For multiple excited modes, the transition between the adiabatic amplification and the damping occurs at different moments; thus, individual modes can deposit their energy independently, each at its own prescribed time.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The implementation and operation of a variable-response electronic throttle control system for a TF-104G aircraft

During some flight programs, researchers have encountered problems in the throttle response characteristics of high-performance aircraft. To study and to help solve these problems, the National Aeronautics and Space Administration Ames Research Center's Dryden Flight Research Facility (Ames-Dryden) conducted a study using a TF-104G airplane modified with a variable-response electronic throttle control system. Ames-Dryden investigated the effects of different variables on engine response and handling qualities. The system provided transport delay, lead and lag filters, second-order lags, command rate and position limits, and variable gain between the pilot's throttle command and the engine fuel controller. These variables could be tested individually or in combination. Ten research flights were flown to gather data on engine response and to obtain pilot ratings of the various system configurations. The results should provide design criteria for engine-response characteristics. The variable-response throttle components and how they were installed in the TF-104G aircraft are described. How the variable-response throttle was used in flight and some of the results of using this system are discussed.

Neal, Bradford↗

Cooperative Electronic and Structural Regulation in a Bioinspired Allosteric Photoredox Catalyst

Here in this article, we report the first allosteric photoredox catalyst regulated via constructively coupled structural and electronic control. While often synergistically exploited in nature, these two types of control mechanisms have only been applied independently in the vast majority of allosteric enzyme mimics and receptors in the literature. By embedding a model of photosystem II in a supramolecular coordination complex that responds to chloride as an allosteric effector, we show that distance and electronic control of light harvesting can be married to maximize allosteric regulation of catalytic activity. This biomimetic system is composed of a Bodipy photoantenna, which is capable of transferring excited-state energy to a photoredox pair, wherein the excitation energy is used to generate a catalytically active charge-separated state. The structural aspect of allosteric regulation is achieved by toggling the coordination chemistry of an antenna-functionalized hemilabile ligand via partial displacement from a Rh I structual node using chloride. In doing so, the distance between the antenna and the central photoredox catalyst is increased, lowering the inherent efficiency of through-space energy transfer. At the same time, coordination of chloride lowers both the charge of the Rh I node and the reduction potential of the Rh II/I couple, to the extent that electronic quenching of the antenna excited state is possible via photoinduced electron transfer from the metal center. Compared to a previously developed system that operates solely via electronic regulation, the present system demonstrates that coupling electronic and structural approaches to allosteric regulation gives rise to improved switching ratios between catalytically active and inactive states. Contributions from both structural and electronic control mechanisms are probed via nuclear magnetic resonance, X-ray diffraction, electrochemical, spectroelectrochemical, and transient absorption studies. Overall, this work establishes that intertwined electronic and structural regulatory mechanisms can be borrowed from nature to build stimuli-responsive inorganic materials with potential applications in sensing, catalysis, and photonic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Boosting Photoabsorption by Attosecond Control of Electron Correlation

Electron correlation plays an essential role in a wide range of fundamentally important many-body phenomena in modern physics and chemistry. An example is the importance of electron-electron correlation in multiple ionization of multielectron atoms and molecules exposed to intense laser pulses. Manipulating the dynamic electron correlation in such photoinduced processes is a crucial step toward the coherent control of chemical reactions and photobiological processes. The generation of an attosecond extreme ultraviolet (EUV) pulse may enable such controls. Here, we show for the first time, from full-dimensional ab initio calculations of double ionization of helium in intense laser pulses ( L = 780 nm), that the electron-electron interactions can be instantaneously tuned using a time-delayed attosecond EUV pulse. Consequently, the probability of producing energetic electrons from excessive photoabsorption can be enhanced by an order of magnitude, by the attosecond control of electron-electron correlation.

74 ATOMIC AND MOLECULAR PHYSICS↗

NASA V/STOL Propulsion Control Analysis - Phase I and II program status

NASA-Lewis Research Center initiated the V/STOL Propulsion Control Analysis Program in 1979 in order to take advantage of advanced electronic control technology for the next generation of V/STOL aircraft. The rationale, methods, and criteria developed during Phase I and Phase II of the program are discussed first. The development of an integrated flight and propulsion control system is then described. Most V/STOL aircraft under consideration depend on reaction thrusters or separate lift engines for attitude control and on engine thrust variations for height control. S/CTOL aircraft vector-thrust for pitch control during low speed operation. The baseline propulsion control system provides a thrust level response of 10 rad/sec and a vectoring response of 22 rad/sec. The requirements of the control components include: (1) redundant electronic control computers with minimum software and 100% Fault Coverage; (2) prime reliable electromechanical actuator interfaces; (3) miniature, digitally compatible sensors with easily detected failure modes; and (4) dual element, fail operational fuel pumps.

Miller, R. J.↗

High Bandwidth Optical Links for Micro-Satellite Support

A method, systems, apparatus and device enable high bandwidth satellite communications. An onboard tracking detector, installed in a low-earth orbit satellite, detects a position of an incoming optical beam received/transmitted from a first ground station of one or more ground stations. Tracker electronics determine orientation information of the incoming optical beam based on the position. Control electronics receive the orientation information from the tracker electronics, and control a waveguide drive electronics. The waveguide drive electronics control a voltage that is provided to an electro-optic waveguide beam steering device. The electro-optic waveguide beam steering device steers an outgoing optical beam to one of the one or more ground stations based on the voltage.

Chao, Tien-Hsin↗

Quantum control of electron wave packets in bound molecules by trains of half-cycle pulses

We investigate protocols for transient localization of electrons in homodiatomic molecules, as well as permanent localization via population inversion in polar molecules. By examining three different model systems with one electronic and one nuclear degree of freedom, we identify mechanisms leading to control over the localization of the electronic wave packets. We show that electronic states dressed by the quasi-dc component of the train of half-cycle pulses steer the combined electronic and nuclear motion toward the targeted state.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Cold Survivable Distributed Motor Controller (CSDMC)

This paper presents the results of NASA’s COLDTECH development entitled “Cold Survivable Distributed Motor Controller (CSDMC)”. This work addresses the need to lower the mass, power and volume of the motor control electronics and its associated cabling. Landed payload mass of ocean world missions typically requires a spacecraft launch mass of 7-10x the landed mass due to the required propellant to get the payload to the surface. Reduction of landed mass leads to cheaper, more frequent missions and/or increased science return. This work addresses this need by developing a distributed electronics architecture, which places control and power electronics near or at actuators and instruments. The outcome of this effort will result in a 10X reduction in harness mass, enabling a significant increase in science payload which then enables more capable sample acquisition, delivery and analysis systems on these missions. Placing the control and power conversion electronics at or near the actuators or instruments is the cornerstone of our distributed architecture. To do this, we developed the technology necessary to distribute the electronics and place them on a shared interface and power bus. This enables a significant reduction in cable mass along with its associated complexity. This allows spacecraft designers to take advantage of volume at the extremities that would normally not be utilized. In this paper we discuss the technologies and system design to achieve these goals in support of ocean world missions. These technologies include the development of our motor control modules, a point of load regulator and isolated converter modules along with the packaging technology necessary to allow our electronics to survive the extreme temperatures.

Stell, Chris↗

Numerical studies of independent control of electron density and gas temperature via nonlinear coupling in dual-frequency atmospheric pressure dielectric barrier discharge plasmas

Dielectric barrier discharges (DBDs) provide a promising technology of generating non-equilibrium cold plasmas in atmospheric pressure gases. For both application-focused and fundamental studies, it is important to explore the strategy and the mechanism for enabling effective independent tuning of key plasma parameters in a DBD system. In this paper, we report numerical studies of effects of dual-frequency excitation on atmospheric DBDs, and modulation as well as separate tuning mechanism, with emphasis on dual-frequency coupling to the key plasma parameters and discharge evolution. With an appropriately applied low frequency to the original high frequency, the numerical calculation demonstrates that a strong nonlinear coupling between two frequencies governs the process of ionization and energy deposition into plasma, and thus raises the electron density significantly (e.g., three times in this case) in comparisons with a single frequency driven DBD system. Nevertheless, the gas temperature, which is mainly determined by the high frequency discharge, barely changes. This method then enables a possible approach of controlling both averaged electron density and gas temperature independently.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Amino Acid Sequence Controls Enhanced Electron Transport in Heme-Binding Peptide Monolayers

Metal-binding proteins have the exceptional ability to facilitate long-range electron transport in nature. Despite recent progress, the sequence-structure–function relationships governing electron transport in heme-binding peptides and protein assemblies are not yet fully understood. In this work, the electronic properties of a series of heme-binding peptides inspired by cytochrome bc1 are studied using a combination of molecular electronics experiments, molecular modeling, and simulation. Self-assembled monolayers (SAMs) are prepared using sequence-defined heme-binding peptides capable of forming helical secondary structures. Following monolayer formation, the structural properties and chemical composition of assembled peptides are determined using atomic force microscopy and X-ray photoelectron spectroscopy, and the electronic properties (current density–voltage response) are characterized using a soft contact liquid metal electrode method based on eutectic gallium–indium alloys (EGaIn). Our results show a substantial 1000-fold increase in current density across SAM junctions upon addition of heme compared to identical peptide sequences in the absence of heme, while maintaining a constant junction thickness. These findings show that amino acid composition and sequence directly control enhancements in electron transport in heme-binding peptides. Overall, this study demonstrates the potential of using sequence-defined synthetic peptides inspired by nature as functional bioelectronic materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Viking Orbiter 1975 articulation control subsystem design analysis

The articulation control subsystem, developed for the Viking Orbiter 1975 spacecraft, is a digital, multiplexed, closed-loop servo system used to control the pointing and positioning of the science scan platform and the high-gain communication antenna, and to position the solar-energy controller louver blades for the thermal control of the propellant tanks. The development, design, and anlaysis of the subsystem is preliminary. The subsystem consists of a block-redundant control electronics multiplexed among eight control actuators. Each electronics block is capable of operating either individually or simultaneously with the second block. This provides the subsystem the capability of simultaneous two-actuator control or a single actuator control with the second block in a stand-by redundant mode. The result of the preliminary design and analysis indicates that the subsystem will perform satisfactorily in the Viking Orbiter 1975 mission. Some of the parameter values used, particularly those in the subsystem dynamics and the error estimates, are preliminary and the results will be updated as more accurate parameter values become available.

Horiuchi, H. H.↗

Using field emission to control the electron energy distribution in high-pressure microdischarges at microscale dimensions

Particle simulations of high-pressure microdischarges at gaps below 10 μm show that the electron energy distribution becomes non-continuous, with discrete peaks corresponding to specific inelastic collisions. The relative magnitude of these peaks and shape of the energy distribution can be directly controlled by the parameter pressure times distance (pd) and the applied potential across the gap. These parameters dictate inelastic collisions experienced by electrons and as both increase the distribution smooths into a Maxwellian-like distribution. By capitalizing on field emission at these dimensions, it is possible to control the energy distribution of free electrons to target specific, energy dependent reactions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

System and method for microwave volumetric additive manufacturing

The present disclosure relates to a volumetric additive manufacturing system for forming a structure from a volume of resin using microwave energy. The system makes use of an electronic controller and at least one beam forming algorithm accessible by the electronic controller for generating information relating to an amplitude and a time delay for forming a microwave signal, where the microwave signal will be used in irradiating a build volume, and where the build volume is formed by the volume of resin. A microwave signal generating subsystem is included which is responsive to the information generated by the beam forming algorithm, and which generates a microwave signal using the amplitude and the time delay determined by the beam forming algorithm. An antenna is used to receive the microwave signal and project the microwave signal as a microwave beam, in accordance with the amplitude and time delay, into the build volume to form the structure.

Mukherjee, Saptarshi↗

Piezoelectric Pushers Suppress Vibrations

Vibration-suppressing control systems including piezoelectric actuators undergoing development. Small, lightweight, and rugged. Requires simpler electronic control subsystems and does not require large electromagnet coils. Continues to provide support and some passive damping even when electronic control subsystems or power supplies fail. Intended primarily to enhance safety and prevent damage in rotating machinery by sensing and counteracting vibrations. Useful in suppressing unpredictable vibrations caused by changes in loads, losses of rotating components and consequent imbalances in rotors, and ingestion of foreign objects into turbines.

Kascak, Albert F.↗

Laboratory tests of laser control of electron beams for future colliders

Laser-driven Compton backscattering (CBS) has been proposed as method for controlling the intensity of colliding bunches in the FCC-ee so as to avoid the flip-flop instability caused by intensity asymmetry in colliding bunches. Laser-based collimation has also been proposed as an indestructible collimator for high-intensity electron beams. We have initiated a laboratory-based test program of these concepts with the E344 experiment at FACET-II. In this paper, we describe simulations of laser–beam interactions at FACET-II and the relevant scaling for FCC-ee. We also describe the experimental setup and diagnostics that will be used to make the measurements at FACET-II.

accelerator physics↗