SEARCH · Search NASA

Results for “core accretion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

All sources NASA NTRS DOE OSTI

NASA NTRS1980

Recent depositional history of Apollo 16 and 17 cores

Measurements of Al-26 and Mn-53 in the Apollo 17 drive tube 76001 show a clear integral excess of activity above expected production down to a depth of at least 9 gm/sq cm. This excess is interpreted as a continuous accretion of highly irradiated surface material slowly transported downslope by impact or other processes at a buildup rate of 1.5 cm/m.y. This drive tube, 76001, was collected near a change in slope on the North Massif. Integral excesses have also been observed in other Apollo 16 and 17 cores. Evidence in the Al-26 and Mn-53 record for continuous accretion is shown for Apollo 16 cores 60007 and 60010 and the Apollo 16 deep drill string 70009-70001. This evaluation shows that accretion at specific sites, either through continuous downslope movement or regolith material on the moon, or simply through small impact redistribution, is common on both small and large scales.

Evans, J. C.↗

NASA NTRS1989

On the rapid formation of giant planet cores

The formation of the ice-rock cores of the giant planets by density wave-assisted accretion is outlined. The process could be rapid (100,000-1,000,000 yr) and completed within the probable lifetime of the solar nebula. The mechanism works for both Jupiter and Saturn and does not require a large excess of mass over that believed present in their cores.

Ward, William R.↗

NASA NTRS1990

The radio properties of cD galaxies in Abell clusters. I - An X-ray selected sample

The radio and X-ray properties of a sample of 27 cD galaxies in rich clusters are presented. The radio data consist of 6 cm VLA maps at a resolution of 1-2 arcsec. The X-ray data consist of images and surface-brightness profiles from the Einstein IPC and derived quantities such as cooling times, mass-accretion rates, and thermal pressures from Arnaud (1988). These data are used to explore the relationship between X-ray cooling cores, and the power and morphology of the radio emission. It is found that 71 percent of the cD's with X-ray cooling cores are radio loud, whereas a smaller but still significant 23 percent of cD's without cooling cores are detected at 6 cm above 0.2 mJy. Among the radio galaxies in noncooling core clusters are luminous and extended wide-angle tails. There is a weak correlation between the mass-accretion rate and the radio power for cD's. There is also an interesting class of cooling core cluster (e.g., A2052) with small diameter, amorphous radio emission that may be the result of diffusion along radial magnetic fields set up in cooling inflows. Finally, the relationships between optical emission-line luminosity with radio power and mass-accretion rate are examined.

Burns, Jack O.↗

NASA NTRS2019

Analysis of Experimental Ice Accretion Data and Assessment of a Thermodynamic Model During Ice Crystal Icing

This paper evaluates a thermodynamic ice crystal icing model that has been previously presented to describe the possible mechanisms of icing within the core of a turbofan jet engine. The model functions between two distinct ice accretions based on a surface energy balance: freeze-dominated icing and melt-dominated icing. Freeze-dominated icing occurs when liquid water (from melted ice crystals) freezes and accretes on a surface along with the existing ice of the impinging water and ice mass. This freeze-dominated icing is characterized as having strong adhesion to the surface. The amount of ice accretion is partially dictated by a freeze fraction, which is the fraction of impinging liquid water that freezes. Melt-dominated icing occurs as unmelted ice on a surface accumulates. This melt-dominated icing is characterized by weakly bonded surface adhesion. The amount of ice accumulation is partially dictated by a melt fraction, which is the fraction of impinging ice crystals that melts. Experimentally observed ice growth rates suggest that only a small fraction of the impinging ice remains on the surface, implying a mass loss mechanism such as splash, runback, bounce, or erosion. The fraction of mass loss must be determined in conjunction with the fraction of freezing liquid water or fraction of melting ice on an icing surface for a given ice growth rate. This mass loss parameter, however, along with the freeze fraction and melt fraction, are the only experimental parameters that are currently not measured directly. Using icing growth rates from ice crystal icing experiments, a methodology that has been previously proposed is used to determine these unknown parameters. This work takes ice accretion data from tests conducted by the National Aeronautics and Space Administration (NASA) at the Glenn Research Center in 2018 that examined the fundamental physics of ice crystal icing. This paper continues evaluation of the thermodynamic model from a previous effort, with additions to the model that account for sub-freezing temperatures that have been observed at the leading edge of the airfoil during icing. The predicted temperatures were generally in good agreement with measured temperatures. Other key findings include the total wet-bulb temperature being a good first order indicator of whether icing is freeze-dominated (sub-freezing values) or melt-dominated (above freezing). Maximum sticking efficiency values, the fraction of impinging mass that adheres to a surface, was calculated to be about 0.2, and retained this maximum value for a range of melt ratios (0.3 to 0.65 and possibly higher), which is defined as the ratio of liquid water content to total water content. Higher air velocities reduced the maximum sticking efficiency and shifted the icing regime to higher melt ratio values. Finally, the leading edge ice accretion angle was found to be related to ice growth (lower growth rates for smaller angles) and melt ratio (smaller melt ratios resulted in smaller angles, likely due to erosion effects).

Ice-Crystal Icing↗

NASA NTRS1989

Active galactic nuclei. III - Accretion flow in an externally supplied cluster of black holes

This third paper in the series modeling QSOs and AGNs as clusters of accreting black holes studies the accretion flow within an externally supplied cluster. Significant radiation will be emitted by the cluster core, but the black holes in the outer halo, where the flow is considered spherically symmetric, will not contribute much to the overall luminosity of the source because of their large velocities relative to the infalling gas and therefore their small accretion radii. As a result, the scenario discussed in Paper I will refer to the cluster cores, rather than to entire clusters. This will steepen the high-frequency region of the spectrum unless inverse Compton scattering is effective. In many cases accretion flow in the central part of the cluster will be optically thick to electron scattering, resulting in a spectrum featuring optically thick radiative component in addition to power-law regimes. The fitting of these spectra to QSO and AGN observations is discussed, and application to 3C 273 is worked out as an example.

Pacholczyk, A. G.↗

NASA NTRS1985

Thermal, dynamic and compositional aspects of the core-forming Earth

Core formation is the most important and singular differentiation event in the history of a terrestrial planet. It almost certainly involved the downward migration of a partially or wholly molten iron alloy through a silicate and oxide mantle, and was contemporaneous with accretion. Several important, unresolved issues which have implications for mantle and core geochemistry, the thermal history of the Earth, and the origin of geomagnetism are addressed: whether the early Earth was molten; whether core formation involved low or high pressure geochemistry, or both; early Earth mantle homogenization; whether equilibration established between core forming material and the mantle through which it migrated; and how much iron is stranded and unable to reach the core.

Stevenson, D. J.↗

DOE OSTI2021

WASP-107b’s Density Is Even Lower: A Case Study for the Physics of Planetary Gas Envelope Accretion and Orbital Migration

With a mass in the Neptune regime and a radius of Jupiter, WASP-107b presents a challenge to planet formation theories. Meanwhile, the planet’s low surface gravity and the star’s brightness also make it one of the most favorable targets for atmospheric characterization. Here, we present the results of an extensive 4 yr Keck/HIRES radial-velocity (RV) follow-up program of the WASP-107 system and provide a detailed study of the physics governing the accretion of the gas envelope of WASP-107b. We reveal that WASP-107b’s mass is only 1.8 Neptune masses (M {sub b} = 30.5 ± 1.7 M {sub ⊕}). The resulting extraordinarily low density suggests that WASP-107b has a H/He envelope mass fraction of >85% unless it is substantially inflated. The corresponding core mass of <4.6 M {sub ⊕} at 3σ is significantly lower than what is traditionally assumed to be necessary to trigger massive gas envelope accretion. We demonstrate that this large gas-to-core mass ratio most plausibly results from the onset of accretion at ≳1 au onto a low-opacity, dust-free atmosphere and subsequent migration to the present-day a {sub b} = 0.0566 ± 0.0017 au. Beyond WASP-107b, we also detect a second, more massive planet (M{sub c}sin i=0.36±0.04M{sub J}) on a wide eccentric orbit (e {sub c} = 0.28 ± 0.07) that may have influenced the orbital migration and spin–orbit misalignment of WASP-107b. Overall, our new RV observations and envelope accretion modeling provide crucial insights into the intriguing nature of WASP-107b and the system’s formation history. Looking ahead, WASP-107b will be a keystone planet to understand the physics of gas envelope accretion.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

NASA NTRS2018

Evaluation of a Thermodynamic Ice Crystal Icing Model Using Experimental Ice Accretion Data

This paper presents the evaluation of a thermodynamic ice crystal icing model, previously presented to describe the possible mechanisms of icing within the core of a turbofan jet engine. It has been proposed that there are two types of distinct ice accretions based on a surface energy balance: freeze-dominated icing and melt-dominated icing. In the former, ice accretion occurs where a freeze fraction (0 to 1) of melted ice crystals freezes on a surface, along with the existing ice of the impinging water and ice mass. This freeze-dominated icing is characterized by having strong adhesion to the surface. In the latter, icing occurs from accumulated unmelted ice on a surface, where a melt fraction (0 to 1) dictates the amount of unmelted impinged ice. This melt-dominated icing is characterized by weakly bonded surface adhesion. The experimentally observed ice growth rates suggest that only a small fraction of the impinging ice remains on the surface, implying a mass loss mechanism such as splash, runback, bounce, or erosion. This mass loss parameter must be determined in conjunction with the fraction of freezing liquid water or fraction of melting ice on an icing surface. This loss parameter, however, along with the freeze and melt fraction, are the only experimental parameters that are currently not measured directly. Using reported icing growth rates from published ice crystal icing experiments, a methodology is proposed to determine these unknown parameters. This work takes reported ice accretion data from tests conducted by the National Aeronautics and Space Administration (NASA) in 2016 and tests NASA collaborated on with the National Research Council (NRC) of Canada in 2012 that examined the fundamental physics of ice crystal icing. Those research efforts sought to generate icing conditions representative of those that occur inside a jet engine when ingesting ice crystals. This paper presents the fundamental equations of the thermodynamic model, the methodology used to determine the aforementioned unknown icing parameters, and results from model evaluation using experimental data. In addition, this paper builds on the previously proposed model by adding a transient conduction term to explain ice growth behavior at the onset of experimental tests that was observed to be different from steady-state ice growth that occurred later in the test run.With the addition of this energy term, this becomes a quasi-steady model. A key finding from this work suggests that mass loss fractions can exceed 0.90 for steady ice growth periods. In addition, due to conductive heat fluxes when using a warmer-than-freezing airfoil, lower mass loss fraction values were calculated during the initial transient period.

Ice-Crystal Ice Accretion↗

NASA NTRS2002

Spectroscopic Detection of a Stellar-like Photosphere in an Accreting Protostar

We present high-resolution (R is approximately equal to 18,000), high signal-to-noise 2 micron spectra of two luminous, X-ray flaring Class I protostars in the rho Ophiuchi cloud acquired with the NIRSPEC (near infrared spectrograph) of the Keck II telescope. We present the first spectrum of a highly veiled, strongly accreting protostar which shows photospheric absorption features and demonstrates the stellar nature of its central core. We find the spectrum of the luminous (L (sub bol) = 10 solar luminosity) protostellar source, YLW 15, to be stellar-like with numerous atomic and molecular absorption features, indicative of a K5 IV/V spectral type and a continuum veiling r(sub k) = 3.0. Its derived stellar luminosity (3 stellar luminosity) and stellar radius (3.1 solar radius) are consistent with those of a 0.5 solar mass pre-main-sequence star. However, 70% of its bolometric luminosity is due to mass accretion, whose rate we estimate to be 1.7 x 10(exp -6) solar masses yr(exp -1). We determine that excess infrared emission produced by the circumstellar accretion disk, the inner infalling envelope, and accretion shocks at the surface of the stellar core of YLW 15 all contribute significantly to its near-IR (infrared) continuum veiling. Its rotational velocity v sin i = 50 km s(exp -1) is comparable to those of flat-spectrum protostars but considerably higher than those of classical T Tauri stars in the rho Oph cloud. The protostar may be magnetically coupled to its circumstellar disk at a radius of 2 - 3 R(sub *). It is also plausible that this protostar can shed over half its angular momentum and evolve into a more slowly rotating classical T Tauri star by remaining coupled to its circumstellar disk (at increasing radius) as its accretion rate drops by an order of magnitude during the rapid transition between the Class I and Class II phases of evolution. The spectrum of WL 6 does not show any photospheric absorption features, and we estimate that its continuum veiling is r(sub k) is greater than or equal to 4.6. Its low luminosity (2 solar masses) and high veiling dictate that its central protostar is very low mass, M is approx. 0.1 solar masses. We also evaluate multi-epoch X ray data along with these spectra and conclude that the X ray variabilities of these sources are not directly related to their protostellar rotation velocities.

Greene, Thomas P.↗

NASA NTRS1989

Radio emission and the hot interstellar medium of early-type galaxies

The results of an analysis of a sample of 84 elliptical and S0 galaxies, observed in X-rays with the Einstein Observatory and in radio continuum at 5 GHz, are reported. Radio flux densities result in some of the lowest radio powers yet reported for early-type galaxies. Radio structures extending beyond the optical radius are found only in galaxies with 5 GHz radio power greater than about 10 exp 29.5 ergs/s/Hz. Radio and X-ray luminosities are correlated, although with large intrinsic scatter, suggesting that more than one mechanism may be involved. A correlation between core radio power and the X-ray-to-optical ratio suggests a connection between the hot ISM and nuclear radio sources and points to accreting cooling flows as the fuel for the radio sources. For the same radio core power, extended radio lobes tend to be associated with galaxies with relatively smaller X-ray-to-optical ratios, pointing to the importance of the hot ISM in disrupting the radio jets and confining extended radio structures.

Fabbiano, G.↗

DOE OSTI2020

Detectability of standing accretion shock instabilities activity in supernova neutrino signals

We introduce a novel methodology for establishing the presence of standing accretion shock instabilities (SASI) in the dynamics of a core collapse supernova from the observed neutrino event rate at water- or ice- based neutrino detectors. The methodology uses a likelihood ratio in the frequency domain as a test- statistics; it is also employed to assess the potential to estimate the frequency and the amplitude of the SASI modulations of the neutrino signal. The parameter estimation errors are consistent with the minimum possible errors as evaluated from the inverse of the Fisher information matrix, and close to the theoretical minimum for the SASI amplitude. Using results from a core-collapse simulation of a 15 solar-mass star by Kuroda et al. [Astrophys. J. 851, 62 (2017).] as a test bed for the method, we find that SASI can be identified with high confidence for a distance to the supernova of up to ~6 kpc for IceCube and up to ~3 kpc for a 0.4 Mt mass water Cherenkov detector. This methodology will aid the investigation of a future galactic supernova.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

NASA NTRS1997

The First Few Parsecs of the Jets in NGC-4261

We have imaged the nucleus of the nearby radio galaxy NGC 4261 (3C270) with the VLBA at 1.6, 8.4, 22, and 43 GHz. At 8.4 GHz our image reveals a narrow gap in emission just east of the core, which we interpret as absorption by an inner accretion disk seen nearly edge-on. If correct, this interpretation implies that the radio jets are almost perpendicular to our line of sight. Thus, NGC 4261 provides an unusually good opportunity to measure component proper motions in both jet and counterjet, free from most relativistic beaming effects. Observations to do this are underway. This is one of the very few sources in which both jet and counterjet are detectable on parsec scales, and it is also one of the closest "classical" double-lobed radio galaxies. Consequently, NGC 4261 is a good laboratory for testing models of jets in low luminosity radio galaxies.

Jones, Dayton↗

NASA NTRS1999

The First Few Parsecs of the Jets in NGC 4261

interferometry↗

NASA NTRS1972

The origin and chemical composition of the earth's core

The process of core formation in the earth is subject to the constraints that it be nearly simultaneous with accretion and yet occur in a manner that the mantle retains radiogenic Xe-129 produced from the extinct radioactivity of I-129 with a half life of 17.6 million y. From these constraints, it appears that the only feasible mechanism is the segregation of an Fe-FeS melt. Trace element abundances in major classes of meteorites and the silicate fractions of the earth show that not only there is a high depletion of sulphur in the crust and the mantle, but that it is even more highly depleted than the rare gases, water and the halogens. From the nature of this depletion pattern and the fact that any model of accretion of the earth will necessarily produce an Fe-FeS melt, it is concluded that the light element in the core is largely sulphur with minor amounts of carbon. A consequence of this mode of core formation is found to be the availability of K-40 radioactive heat production in the liquid core, estimated at about 10 to the 19th power erg/s at the present time.

Murthy, V. R.↗

NASA NTRS1978

Core formation, evolution, and convection: A geophysical model

A model is proposed for the formation and evolution of the Earth's core which provides an adequate energy source for maintaining the geodynamo. A modified inhomogeneous accretion model is proposed which leads to initial iron and refractory enrichment at the center of the planet. The probable heat source for melting of the core is the decay of Al. The refractory material is emplaced irregularly in the lowermost mantle with uranium and thorium serving as a long lived heat source. Fluid motions in the core are driven by the differential heating from above and the resulting cyclonic motions may be the source of the geodynamo.

Ruff, L.↗

NASA NTRS2016

The Merging Galaxy Cluster A520 - A Broken-Up Cool Core, A Dark Subcluster, and an X-Ray Channel

We present results from a deep Chandra X-ray observation of a merging galaxy cluster A520. A high-resolution gas temperature map reveals a long trail of dense, cool clumpsapparently the fragments of a cool core that has been stripped from the infalling subcluster by ram pressure. The clumps should still be connected by the stretched magnetic field lines. The observed temperature variations imply that thermal conductivity is suppressed by a factor greater than 100 across the presumed direction of the magnetic field (as found in other clusters), and is also suppressed along the field lines by a factor of several. Two massive clumps in the periphery of A520, visible in the weak-lensing mass map and the X-ray image, have apparently been completely stripped of gas during the merger, but then re-accreted the surrounding high-entropy gas upon exit from the cluster. The mass clump that hosted the stripped cool core is also re-accreting hotter gas. An X-ray hydrostatic mass estimate for the clump that has the simplest geometry agrees with the lensing mass. Its current gas mass to total mass ratio is very low, 1.5 percent to 3 percent, which makes it a "dark subcluster." We also found a curious low X-ray brightness channel (likely a low-density sheet in projection) going across the cluster along the direction of an apparent secondary merger. The channel may be caused by plasma depletion in a region of an amplified magnetic field (with plasma Beta approximately equal to 10-20). The shock in A520 will be studied in a separate paper.

galaxies: clusters: individual (A520) â€“ intergal↗

NASA NTRS1992

Evidence for a high temperature differentiation in a molten earth: A preliminary appraisal

If the earth were molten during its later stages of accretion as indicated by the present understanding of planetary accretion process, the differentiation that led to the formation of the core and mantle must have occurred at high temperatures in the range of 3000-5000 K because of the effect of pressure on the temperature of melting in the interior of the earth. This calls into question the use of low-temperature laboratory measurements of partition coefficients of trace elements to make inferences about earth accretion and differentiation. The low temperature partition coefficients cannot be directly applied to high temperature fractionations because partition coefficients refer to an equilibrium specific to a temperature for a given reaction, and must change in some proportion to exp 1/RT. There are no laboratory data on partition coefficients at the high temperatures relevant to differentiation in the interior of the earth, and an attempt to estimate high temperature distribution coefficients of siderophile elements was made by considering the chemical potential of a given element at equilibrium and how this potential changes with temperature, under some specific assumptions.

Murthy, V. Rama↗

NASA NTRS1980

Irradiation history of the lunar regolith at the Apollo 14, 15, and 17 sites - Additional insights

Nuclear particle track data in three cores (14211/14210, 15010, and 76001) are presented to illustrate the importance of different modes of accretion at different sites. Track densities of individual grains and quartile track densities as a function of depth are presented for the Apollo 14 core; and although they are characteristic of typical mature soils, they show striking variations with depth. A gradual accumulation of the Apollo 15 core is favored, and the Apollo 17 core is found to be heavily irradiated. With the exception of a sample taken at 27 cm depth, and in contrast with the other sections studied, the whole core 76001 consists of material in which the quartile track density is in excess of 10 to the 8th per sq cm.

Crozaz, G.↗