Search NASA⌕ Search

SEARCH · Search NASA

Results for “core sampling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Numerical modeling of injection, stress and permeability enhancement during shear stimulation at the Desert Peak Enhanced Geothermal System

Creation of an Enhanced Geothermal System relies on stimulation of fracture permeability through self-propping shear failure that creates a complex fracture network with high surface area for efficient heat transfer. In 2010, shear stimulation was carried out in well 27-15 at Desert Peak geothermal field, Nevada, by injecting cold water at pressure less than the minimum principal stress. An order-of-magnitude improvement in well injectivity was recorded. In this work, we describe a numerical model that accounts for injection-induced stress changes and permeability enhancement during this stimulation. We use the coupled thermo-hydrological–mechanical simulator FEHM to (i) construct a wellbore model for non-steady bottom-hole temperature and pressure conditions during the injection, and (ii) apply these pressures and temperatures as a source term in a numerical model of the stimulation. A Mohr–Coulomb failure criterion and empirical fracture permeability is developed to describe permeability evolution of the fractured rock. The numerical model is calibrated using laboratory measurements of material properties on representative core samples and wellhead records of injection pressure and mass flow during the shear stimulation. The model captures both the absence of stimulation at low wellhead pressure (WHP ≤1.7 and ≤2.4 MPa) as well as the timing and magnitude of injectivity rise at medium WHP (3.1 MPa). Results indicate that thermoelastic effects near the wellbore and the associated non-local stresses further from the well combine to propagate a failure front away from the injection well. Elevated WHP promotes failure, increases the injection rate, and cools the wellbore; however, as the overpressure drops off with distance, thermal and non-local stresses play an ongoing role in promoting shear failure at increasing distance from the well.

15 GEOTHERMAL ENERGY↗

Brachytherapy or Conformal External Radiotherapy for Prostate Cancer: A Single-Institution Matched-Pair Analysis

Purpose: In the absence of randomized study data, institutional case series have shown brachytherapy (BT) to produce excellent biochemical control (bNED) in patients with localized prostate cancer compared with alternative curative treatments. This study was designed to overcome some of the limitations of case series studies by using a matched-pair design in patients treated contemporaneously with BT and external beam radiation therapy (EBRT) at a single institution. Methods and Materials: Six hundred one eligible patients treated between 1998 and 2001 were prospectively followed up in our institutional databases and matched on a 1:1 basis for the following known prognostic variables: prostate-specific antigen (PSA) level, Gleason score, T stage, the use and duration of neoadjuvant androgen deprivation therapy, and the percentage of positive tissue core samples. Two hundred seventy-eight perfect matches of patients (139 in each group) with low- and intermediate-risk cancer were further analyzed. bNED (Phoenix definition) was the primary endpoint. Other endpoints were toxicity, PSA kinetics, and the secondary use of androgen deprivation therapy. Results: The 5-year bNED rates were 95% (BT) and 85% (EBRT) (p < 0.001). After 7 years, the BT bNED result was unchanged, but the rate in EBRT patients had fallen to 75%. The median posttreatment PSA nadirs were 0.04 ng/mL (BT) and 0.62 ng/mL (EBRT, p < 0.001), which predicted a higher ongoing treatment failure rate in association with EBRT use than with BT use. Late urinary toxicity and rectal/bowel toxicity were worse in patients treated with BT and EBRT, respectively. Conclusions: BT for both low-risk and selected intermediate-risk cancers achieves exceptional cure rates. Even with dose escalation, it will be difficult for EBRT to match the proven track record of BT seen over the past decade.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Comparison of experimental methods for estimating matrix diffusion coefficients for contaminant transport modeling

Here, diffusion cell and diffusion wafer experiments were conducted to compare methods for estimating effective matrix diffusion coefficients in rock core samples from Pahute Mesa at the Nevada Nuclear Security Site (NNSS). A diffusion wafer method, in which a solute diffuses out of a rock matrix that is pre-saturated with water containing the solute, is presented as a simpler alternative to the traditional through-diffusion (diffusion cell) method. Both methods yielded estimates of effective matrix diffusion coefficients that were within the range of values previously reported for NNSS volcanic rocks. The difference between the estimates of the two methods ranged from 14 to 30%, and there was no systematic high or low bias of one method relative to the other. From a transport modeling perspective, these differences are relatively minor when one considers that other variables (e.g., fracture apertures, fracture spacings) influence matrix diffusion to a greater degree and tend to have greater uncertainty than effective matrix diffusion coefficients. For the same relative random errors in concentration measurements, the diffusion cell method yields effective matrix diffusion coefficient estimates that have less uncertainty than the wafer method. However, the wafer method is easier and less costly to implement and yields estimates more quickly, thus allowing a greater number of samples to be analyzed for the same cost and time. Given the relatively good agreement between the methods, and the lack of any apparent bias between the methods, the diffusion wafer method appears to offer advantages over the diffusion cell method if better statistical representation of a given set of rock samples is desired.

54 ENVIRONMENTAL SCIENCES↗

Geochemical solid characterization of drill cuttings, core and drilling mud from Marcellus Shale Energy development

Million tons of drill cuttings generated from shale gas development are currently disposed of in landfills, buried in-situ, or reused as road fill. Cuttings, core samples and operating drilling mud from the Marcellus Shale Energy and Environmental Laboratory in WV were studied to better characterize drill cuttings and to evaluate trace metal mobility in various disposal environments. Results showed that physical and chemical properties of drill cuttings are impacted by the host-rock formation, calcium sources and the residual drilling-mud. Barite in residual drilling mud forms a coating around rock cuttings and influences the mobility of Sr in drill cuttings. Trace metals in drill cuttings are primarily associated with pyrite and total organic carbon (TOC) phases in the shale. As a result, based on sequential extraction results, various trace metal mobilities are controlled by additional solid fractions in drill cuttings, such as pyrite, TOC, calcite, barite and exchangeable clays in the shale.

58 GEOSCIENCES↗

Comparison of permeability predictions on cemented sandstones with physics-based and machine learning approaches

Permeability prediction has been an important problem since the time of Darcy. Most approaches to solve this problem have used either idealized physical models or empirical relations. In recent years, machine learning (ML) has led to more accurate and robust, but less interpretable empirical models. Using 211 core samples collected from 12 wells in the Garn Sandstone from the North Sea, this study compared idealized physical models based on the Carman-Kozeny equation to interpretable ML models. We found that ML models trained on estimates of physical properties are more accurate than physical models. The results show evidence of a threshold of about 10% volume fraction, above which pore-filling cement strongly affects permeability.

03 NATURAL GAS↗

Occurrence of gas hydrate in Oligocene Frio sand: Alaminos Canyon Block 818: Northern Gulf of Mexico

A unique set of high-quality downhole shallow subsurface well log data combined with industry standard 3D seismic data from the Alaminos Canyon area has enabled the first detailed description of a concentrated gas hydrate accumulation within sand in the Gulf of Mexico. The gas hydrate occurs within very fine grained, immature volcaniclastic sands of the Oligocene Frio sand. Analysis of well data acquired from the Alaminos Canyon Block 818 No.1 ('Tigershark') well shows a total gas hydrate occurrence 13 m thick, with inferred gas hydrate saturation as high as 80% of sediment pore space. Average porosity in the reservoir is estimated from log data at approximately 42%. Permeability in the absence of gas hydrates, as revealed from the analysis of core samples retrieved from the well, ranges from 600 to 1500 millidarcies. The 3-D seismic data reveals a strong reflector consistent with significant increase in acoustic velocities that correlates with the top of the gas-hydrate-bearing sand. This reflector extends across an area of approximately 0.8 km{sup 2} and delineates the minimal probable extent of the gas hydrate accumulation. The base of the inferred gas-hydrate zone also correlates well with a very strong seismic reflector that indicates transition into units of significantly reduced acoustic velocity. Seismic inversion analyses indicate uniformly high gas-hydrate saturations throughout the region where the Frio sand exists within the gas hydrate stability zone. Numerical modeling of the potential production of natural gas from the interpreted accumulation indicates serious challenges for depressurization-based production in settings with strong potential pressure support from extensive underlying aquifers.

54 ENVIRONMENTAL SCIENCES↗

Permeability and porosity of hydrate-bearing sediments in the northern Gulf of Mexico

Hydrate-bearing sands are being actively explored because they contain the highest concentrations of hydrate and are the most economically recoverable hydrate resource. However, relatively little is known about the mechanisms or timescales of hydrate formation, which are related to methane supply, fluid flux, and host sediment properties such as permeability. We used logging-while-drilling data from locations in the northern Gulf of Mexico to develop an effective medium theory-based model for predicting permeability based on clay-sized sediment fraction. The model considers permeability varying between sand and clay endpoint permeabilities that are defined from laboratory data. We verified the model using permeability measurements on core samples from three boreholes, and then used the model to predict permeability in two wells drilled in Walker Ridge Block 313 during the Gulf of Mexico Gas Hydrate Joint Industry Project Leg II expedition in 2009. We found that the cleanest sands (clay-sized fraction <0.05) had intrinsic (hydrate-free) permeability contrasts of 5-6 orders of magnitude with the surrounding clays, which is sufficient to provide focused hydrate formation due to advection of methane from a deep source or diffusion of microbial methane from nearby clay layers. In sands where the clay-sized fraction exceeds 0.05, the permeability reduces significantly and focused flow is less pronounced. In these cases, diffusion of dissolved microbial methane is most likely the preferred mode of methane supply for hydrate formation. In conclusion, our results provide important constraints on methane supply mechanisms in the Walker Ridge area and have global implications for evaluating rates of methane migration and hydrate formation in hydrate-bearing sands.

58 GEOSCIENCES↗

Assessing the geomechanical stability of interbedded hydrate-bearing sediments under gas production by depressurization at NGHP-02 Site 16

Establishing the geomechanical stability of marine sediments in the vicinity of a production well is one of the key design considerations in planning offshore gas production from marine hydrate reservoirs. This work presents an assessment of the sediment stability at India's National Gas Hydrate Program, Expedition 2 (NGHP-02) Site 16 Area B offshore eastern India, for which gas production is to be carried out by depressurization. One important feature of the study is that extensive calibration of constitutive model parameters has been conducted based on laboratory test data from pressured core samples. From analysis perspective, the site is challenging because the hydrate reservoir consists of thin layers of hydrate-bearing sands interbedded with mud. Moreover, depressurization at the depth of a reservoir more than 2750 m below sea surface will lead to a pore pressure drop, and accordingly an effective confining stress increase as high as 25 MPa. In dealing with thin interbedded hydrate-bearing strata, meshing requirements for flow and geomechanical analysis are quite different from those for reservoirs with thicker massive layers, An axisymmetric model and one-way coupling simulations were thus adopted for this study, in which the geomechanical study utilizes pore pressure and hydrate saturation output from the flow study, but the flow study does not takes the porosity changes from the geomechanical analysis. Instead, the reduction of porosity due to sediment deformation in the flow study is based on a pressure-dependent pore compressibility relationship derived from geomechanical modeling. The rationality is validated through back computing the pore compressibility from the geomechanical deformation results. Finally, the study shows that large compression in the reservoir will result in movement of the sediments from above and below, as well as laterally in smaller magnitudes; and the sediment is deemed stable during the gas production period.

58 GEOSCIENCES↗

Quantification of CO 2 Mineralization at the Wallula Basalt Pilot Project

In 2013, the Pacific Northwest National Laboratory led a geologic carbon sequestration field demonstration where ~1000 tonnes of CO 2 was injected into several deep Columbia River Basalt zones near Wallula, Washington. Rock core samples extracted from the injection zone two years after CO 2 injection revealed nascent carbonate mineralization that was qualitatively consistent with expectations from laboratory experiments and reactive transport modeling. In this study, we report on a new detailed analysis of the 2012 pre-injection and 2015 post-injection hydrologic tests that capitalizes on the difference in fluid properties between scCO 2 and water to assess changes in near-field, wellbore, and reservoir conditions that are apparent approximately two years following the end of injection. This comparative hydrologic test analysis method provides a new way to quantify the amount of injected CO 2 that was mineralized in the field test. Modeling results indicate that approximately 60% of the injected CO 2 was sequestered via mineralization within two years, with the resulting carbonates occupying ~4% of the available reservoir pore space. The method presented here provides a new monitoring tool to assess the fate of CO 2 injected into chemically reactive basalt formations but could also be adapted for long-term monitoring and verification within more traditional subsurface carbon storage reservoirs.

54 ENVIRONMENTAL SCIENCES↗

Bioadsorption of rare earth elements through cell surface display of lanthanide binding tags

In this study, with the increasing demand for rare earth elements (REEs) in many emerging clean energy technologies, there is an urgent need for the development of new approaches for efficient REE extraction and recovery. As a step toward this goal, we genetically engineered the aerobic bacterium Caulobacter crescentus for REE adsorption through high-density cell surface display of lanthanide binding tags (LBTs) on its S-layer. The LBT-displayed strains exhibited enhanced adsorption of REEs compared to cells lacking LBT, high specificity for REEs, and an adsorption preference for REEs with small atomic radii. Adsorbed Tb 3+ could be effectively recovered using citrate, consistent with thermodynamic speciation calculations that predicted strong complexation of Tb 3+ by citrate. No reduction in Tb 3+ adsorption capacity was observed following citrate elution, enabling consecutive adsorption/desorption cycles. The LBT-displayed strain was effective for extracting REEs from the acid leachate of core samples collected at a prospective rare earth mine. Our collective results demonstrate a rapid, efficient, and reversible process for REE adsorption with potential industrial application for REE enrichment and separation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Numerical Simulation of Permeability Change in Wellbore Cement Fractures after Geomechanical Stress and Geochemical Reactions Using X-ray Computed Tomography Imaging

X-ray microtomography (XMT) imaging combined with a three-dimensional (3D) computational fluid dynamics (CFD) modeling technique was used to study the effect of geochemical and geomechanical processes on fracture properties in composite Portland cement–basalt caprock core samples. The effect of fluid properties and flow conditions on fracture permeability was numerically studied by using fluids with varying physical properties and simulating different pressure conditions. CFD revealed that the application of geomechanical stress led to increased fluid flow, which resulted in increased fracture permeability. After CO2-reaction, XMT images displayed preferential precipitation of calcium carbonate within the fractures in the cement matrix and less precipitation in fractures located at the cement–basalt interface. CFD predicted changes in flow characteristics and differences in absolute values of flow properties due to different pressure gradients. CFD was able to highlight the profound effect of fluid properties on flow characteristics and hydraulic properties of fractures. This study demonstrates the applicability of XMT imaging and CFD as powerful tools for characterizing the hydraulic properties of fractures in a number of applications like geologic carbon sequestration and storage, hydraulic fracturing for shale gas production, and enhanced geothermal systems.

CO2 storage↗

Hydrate-filled Fracture Formation at Keathley Canyon 151, Gulf of Mexico, and Implications for Non-vent Sites

Near-vertical hydrate-filled fractures are found in subseafloor marine muds, at both advective methane vent sites and at sites without obvious methane and fluid advection (non-vent sites). At non-vent sites, the mechanisms that transport methane to the fractures and control how hydrate-filled fractures form are not well understood. However, these mechanisms are important to establish, as most of Earth's natural gas hydrate is likely bound in marine mud systems. In this work, we focus on understanding the origin of hydrate and how fracture form at non-vent sites by examining previously hydrate-bearing fractures in conventional cores taken from Keathley Canyon 151, U.S. northern Gulf of Mexico, drilled by the Gas Hydrate Joint Industry Project in 2005. We combine information from well logs, sediment cores, and science party results and add new X-ray computed tomography of archival sections and scanning electron microcopy of core samples to develop a conceptual model. We propose that locally generated microbial methane is transported via diffusion from small pores in marine mud into biomineralized burrows with larger pore size in a process called short-range migration. Hydrate forms in burrows once the methane diffuses into them and the dissolved methane concentration exceeds the solubility threshold. When hydrate fills a burrow, heave from additional hydrate growth places stress on the burrow edges, expands the fracture, and creates additional void space in which methane can diffuse and continue forming hydrate. Fractures slowly propagate in the direction of maximum principal stress.

58 GEOSCIENCES↗

Creep Deformation in Vaca Muerta Shale From Nanoindentation to Triaxial Experiments

In this work, we tested samples cored from the Vaca Muerta shale reservoir using nanoindentation (2 min) and triaxial (12 hr) creep experiments in which confining pressure and differential stresses were <40 MPa. In all cases, we observed transient creep wherein strain increased as the logarithm of time. Creep was always compactional, led to increased moduli, was triggered by changes in either hydrostatic or deviatoric stress, and occurred under loads well below the failure stress. Our results are consistent with yield cap models proposed to describe shear-enhanced compaction of sandstones and carbonates, assuming that the yield surface depends on strain rate. We compared our results to earlier studies that observed the transition from transient creep to approximately constant strain rate behavior. If short-term creep can be quantified by a creep modulus, $C$, and long-term creep, after a transition time, $t_c$, by a linear viscosity, $η$, then $η = Ct_c$. Owing to heterogeneity, the local values of Young's and creep moduli, E and C, measured during nanoindentation, varied by several orders of magnitude. Simple averaging of the indentation results overestimated E and C, as compared to their triaxial counterparts. The kinetics of log time creep, which is seen in various materials and loading circumstances, has been represented by a simple conceptual model incorporating the interplay of viscoelastic elements with widely distributed characteristic times. Thus, we argue that log time creep is an emerging phenomenon, independent of the identities of the underlying physical mechanisms.

58 GEOSCIENCES↗

A Satellite-Based Estimate of Convective Vertical Velocity and Convective Mass Flux: Global Survey and Comparison with Radar Wind Profiler Observations

Convective vertical velocity (w c ) and convective mass flux (M c ) lie at the heart of GCM cumulus parameterizations, but few observations of these critical parameters are available. In this paper, we develop and evaluate a novel, satellite-based method for estimating profiles of w c and M c . Here, comparisons with collocated ground-based radar wind profiler (RWP) observations show that satellite estimated median w c is slightly greater than the RWP estimates, but they show solid agreement when compared at the 95th percentiles (intense updrafts). RWP-derived and satellite estimated M c are broadly comparable in the lower and middle troposphere, with some differences in the upper troposphere due to differences in convective core sampling. A k-means cluster analysis of multiple years of w c data shows that convective characteristics are distinctly different among extratropical convection, tropical land convection, and tropical oceanic convection. Tropical land convection is significantly more intense and more variable than the oceanic counterpart.

54 ENVIRONMENTAL SCIENCES↗

Accessing the Subsurface Biosphere Within Rocks Undergoing Active Low-Temperature Serpentinization in the Samail Ophiolite (Oman Drilling Project)

The Oman Drilling Project established an “Active Alteration” multi-borehole observatory in peridotites undergoing low-temperature serpentinization in the Samail Ophiolite. The highly serpentinized rocks are in contact with strongly reducing fluids. Distinct hydrological regimes, governed by differences in rock porosity and fracture density, give rise to steep redox (Eh +200 to –750 mV) and pH (pH range 8.5–11.2) gradients within the 300–400 m deep boreholes. The serpentinites and fluids host an active subsurface ecosystem. Microbial cell abundances in serpentinite vary at least six orders of magnitude, from ≤3.5 × 10 1 to 2.9 × 10 7 cells/g. Low levels of biological sulfate reduction (2–1,000 fmol/cm 3 /day) can be detected in rock cores, particularly in rocks in contact with reduced groundwaters with pH < 10.5. Thermodesulfovibrio is the predominant sulfate reducer identified via metagenomic sequencing of adjacent groundwater communities. Here, we infer that transport and reaction of microbially generated sulfide with the serpentine and brucite assemblages gives rise to optical darkening and sulfide overprinting, including the formation of tochilinite-vallerite group minerals, potentially serving as an indicator that this system is inhabited by microbial life. Olivine mesh-cores replaced with ferroan brucite and minor awaruite, abundant veins containing hydroandradite garnet and polyhedral serpentine, and late-stage carbonate veins are suggested as targets for future spatially resolved life-detection investigations. The high-quality whole-round core samples that have been preserved can be further probed to define how life distributes itself and functions within a system where chemical disequilibria are sustained by low-temperature water/rock interaction, and how biosignatures of in situ microbial activity are generated.

58 GEOSCIENCES↗

Quantifying the Effect of Pore‐Size Dependent Wettability on Relative Permeability Using Capillary Bundle Model

Abstract Relative permeability is a key parameter for characterizing the multiphase flow dynamics in porous media at macroscopic scale while it can be significantly impacted by wettability. Recently, it has been reported in microfluidic experiments that wettability is dependent on the pore size (Van Rooijen et al., 2022). To investigate the effect of pore‐size‐dependent wettability on relative permeability, we propose a theoretical framework informed by digital core samples to quantify the deviation of relative permeability curves due to wettability change. We find that the significance of impact is highly dependent on two factors: (i) the function between contact angle and pore size (ii) overall pore size distribution. Under linear function, this impact can be significant for tight porous media with a maximum deviation of 1,000%.

Yu, Siqin↗

Effect of maturity and mineralogy on fluid-rock reactions in the Marcellus Shale

Natural gas extraction from the Appalachian Basin has significantly increased in the past decade. The push to properly dispose, reuse, or recycle the large amounts of produced fluids associated with hydraulic fracturing operations and design better fracturing fluids has necessitated a better understanding of the subsurface chemical reactions taking place during hydrocarbon extraction. Using autoclave reactors, this study mimics the conditions of deep subsurface shale reservoirs to observe the chemical evolution of fluids during the shut-in phase of hydraulic fracturing (HF), a period when hydraulic fracturing fluids (HFFs) remain confined in the reservoir. The experiment was conducted by combining a synthetic hydraulic fracturing fluid and powdered shale core samples in high temperature/pressure static autoclave reactors for 14 days. Shale samples of varying maturity and mineralogy were used to assess the effect of these variations on the proliferation of inorganic ions and low molecular weight volatile organic compounds (VOCs), mainly benzene, toluene, ethylbenzene and xylenes (BTEX) and monosubstituted carboxylic acids. Ion chromatography results indicate that the relative abundance of ions present was similar to that of water produced from HF operations in the Marcellus Shale basin. There was an increase of SO 4 2- and PO 4 3- and a decrease in Ba 2+ upon fluid-shale reaction. Major ionic shifts indicate calcite dissolution in two of the fluid-shale reactions and barite precipitation in all fluid-shale reactions. Toluene, xylene, and carboxylic acids were produced in the shale-free control experiment. The most substantial increase in BTEX analytes was observed in reactions with low maturity shale, while the high maturity shale reaction produced no measurable BTEX compounds. Total organic carbon decreased in all reactions including fracturing fluid and shale, suggesting adsorption onto the organic matter (OM) matrix. The results from this study highlight that both the nature of OM and mineralogy play a key role in determining the fate of inorganic and organic compounds during fluid–shale interactions in the subsurface shale reservoir. Overall this study aims to contribute to the growing understanding of complex chemical interactions that occur in the shale reservoirs during HF, which is vital for determining the potential environmental impacts of HF and designing more efficient HFF and produced water recycling techniques for environmentally conscious natural gas production.

58 GEOSCIENCES↗

The effect of foam quality, particle concentration and flow rate on nanoparticle-stabilized CO 2 mobility control foams

CO 2 foam is regarded as a promising technology and widely used in the oil and gas industry, not only to improve oil production, but also to mitigate carbon emissions through their capture. This paper describes a series of nanoparticle-stabilized CO 2 foam generation and foam flow experiments under reservoir conditions. Stable CO 2 foam was generated when CO 2 and a nanosilica dispersion flowed through the core sample under 1500 psi and 25 °C. The foam changed from a fine-texture foam to a coarse foam as the foam quality increased from 20% to 95%. Foam mobility increased slightly with the increasing foam quality from 20% to 80% and then rapidly from 80% to 95%. A stable CO 2 foam was generated as the nanosilica concentration increased to 2500 ppm. Foam mobility and resistance factor increased with the increasing nanosilica concentration. As the injection flow rate increased to 60 ml h -1 , stable and fine-texture CO 2 foam was obtained. Foam mobility was observed to remain almost constant as the injection flow rate increased from 60 ml h -1 to 150 ml h -1 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗