Search NASA⌕ Search

SEARCH · Search NASA

Results for “coronal hole”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Identification and analysis of structures in the corona from X-ray photography

This paper summarizes the results of a program of rocket observations of the solar corona with grazing incidence X-ray telescopes. A series of five flights of a Kanigen-surfaced telescope with a few arc seconds resolution, together with the first flight of a newer telescope have resulted in the identification of six classes of coronal structures observable in the X-ray photographs. These are: active regions, active region interconnections, large loop structures associated with unipolar magnetic regions, coronal holes, coronal bright points, and the structures surrounding filament cavities. Two solar flares have been observed. The methods involved in deriving coronal temperature and density information from X-ray photographs are described and the analysis of a bright active region (McMath plage 11035) observed at the west limb on November 24, 1970 is presented as an example of these techniques.

Vaiana, G. S.↗

Knowledge of coronal heating and solar-wind acceleration obtained from observations of the solar wind near 1 AU

Clues to the nature of the mechanisms responsible for heating the corona and accelerating the solar wind can be obtained by contrasting the properties of the quasi-stationary and transient states of the solar wind. Substantial differences exist in the proton temperatures and anisotropies, the entropy, the field strength, the Alfvenicity of fluctuations in the field, the distribution of MHD discontinuities, and the helium abundance of the two types of flow. Those differences are displayed as a function of the solar wind speed. Several signals of wave acceleration can be found in the data for quasi-stationary flows. The relatively smooth velocity dependences of proton temperature, helium abundance, and frequency of occurrence of rotational discontinuities suggest that the acceleration mechanisms for flow from coronal holes, coronal streamers, and the quasi-stationary low-speed flows between them may be basically the same, differing only in degree.

Neugebauer, M.↗

Solar-Wind Conditions During the Initial Phase of the Genesis Mission

We describe solar-wind conditions, including relative fractions of the solar-wind regimes (interstream, coronal hole, coronal mass ejections), during initial Genesis solar-wind sample collection, and give implications for eventual sample analysis. Additional information is contained in the original extended abstract.

Wiens, R. C.↗

Onset of the Magnetic Explosion in On-Disk Solar Coronal Jets

In our recent studies of ~10 quiet region and ~13 coronal hole coronal jets, we found that flux cancelation is the fundamental process in the buildup and triggering of the minifilament eruption that drives the production of the jet. Here, we investigate the onset and growth of the ten on-disk quiet region jets, using EUV images (304, 171, 193, and 94 Å) from SDO/AIA and magnetograms from SDO/HMI. We find that: (i) in all ten events the minifilament starts to rise at or before the onset of the signature of internal or external reconnection; (ii) in two out of ten jets brightening from the external reconnection starts at the same time as the slow rise of the minifilament and (iii) in six out of ten jets brightening from the internal reconnection starts before the start of the brightening from external reconnection. These observations show that the magnetic explosion in coronal jets begins in the same way as the magnetic explosion in filament eruptions that make solar flares and coronal mass ejections (CMEs). Our results indicate (1) that coronal jets are miniature versions of CME-producing eruptions and flux cancelation is the fundamental process that builds and triggers both the small-scale and the large-scale eruptions, and (2) that, contrary to the view of Moore et al (2018), the current sheet at which the external reconnection occurs in coronal jets usually starts to form at or after the onset of (and as a result of) the slow rise of the minifilament flux-rope eruption, and so is seldom of appreciable size before the onset of the slow rise of the minifilament flux-rope eruption.

Panesar, Navdeep K.↗

The heliospheric energy source

The solar wind and the heliosphere exist as a consequence of the heat input to the corona, particularly the coronal holes. The necessary energy input to coronal holes has been estimated to be 10 to the 6th erg/sq cm sec, requiring Alfven waves with rms fluid velocities of 100 km/sec. Observational upper limits on coronal fluid velocities are of the order of 25 km/sec, which may not apply to the transparent coronal hole. Alternatively it has been suggested that coronal holes may be heated by agitation from neighboring active regions, suggesting that the vigor of a coronal hole depends upon its location. The Ulysses Mission will provide a direct comparison of the strength of the high speed wind from coronal holes at low latitude and coronal holes at high latitude, from which the nature of the presently unknown energy sources of the coronal holes and the resulting structure of the heliosphere may be better judged. The question is fundamental to the dynamics of the windspheres of all stars.

Parker, E. N.↗

Coronal Hole-Active Region-Current Sheet (CHARCS) Association with Intense Interplanetary and Geomagnetic Activity

Intense geomagnetic storms (Dst<or equal to -100nT) have been associated with interplanetary structures involving large-intensity (B(sub 3)<or equal to 10nT) and long-duration (T< or equal to 3 hours) values of the southward component of the IMF. We show that near solar maximum, the solar origin of such structures seems to be associated with active regions(flares and/or filament eruptions) ocurring close to the streamer belt and to growing low altitude coronal holes. It is also shown that such type of coronal holes had a dual-peak solar cycle distribution during solar cycle 21, similar to that previously reported for the above mentioned interplanetary and geomagnetic phenomena.

geomagnetic storms IMF solar maximum flares filame↗

Large-scale structure of solar wind as observed on the Prognoz 7 satellite

Properties of different solar wind streams depend on the large scale structure of coronal magnetic field and dynamical phenomena in the solar atmosphere. We present average values and distributions of MHD parameters (density, velocity, temperature, fluxes of mass, momentum and energy, ratio of thermal and magnetic pressures, as well as helium abundance) as observed on board the Prognoz 7 satellite in the different types of the solar wind streams connected with solar corona structure and phenomena: (1) heliospheric current sheet, (2) streams from coronal holes, (3) streams from coronal streamers, (4) plasma disturbed by interplanetary shocks, and (5) coronal mass ejections. As for quasistationary streams of solar wind, maximum mass flux is recorded in the streams emanating from the coronal streamers while maximum thermal and kinetic energy fluxes are observed in the streams from the coronal holes. The momentum fluxes are equal in both types of streams. Maximum ratio of thermal and magnetic pressures is observed in heliospheric current sheet. The maximum helium abundance is observed in coronal mass ejection, it is higher in streams from coronal holes than in streams from streamers, and its dependences on density and mass flux are different in different types of the streams. Dynamics of alpha-particle velocity and temperature relative to protons in different streams is discussed.

Yermolaev, Yu. I.↗

The Evolution of Open Magnetic Flux Driven by Photospheric Dynamics

The coronal magnetic field is of paramount importance in solar and heliospheric physics. Two profoundly different views of the coronal magnetic field have emerged. In quasi-steady models, the predominant source of open magnetic field is in coronal holes. In contrast, in the interchange model, the open magnetic flux is conserved, and the coronal magnetic field can only respond to the photospheric evolution via interchange reconnection. In this view the open magnetic flux diffuses through the closed, streamer belt fields, and substantial open flux is present in the streamer belt during solar minimum. However, Antiochos and co-workers, in the form of a conjecture, argued that truly isolated open flux cannot exist in a configuration with one heliospheric current sheet (HCS) - it will connect via narrow corridors to the polar coronal hole of the same polarity. This contradicts the requirements of the interchange model. We have performed an MHD simulation of the solar corona up to 20R solar to test both the interchange model and the Antiochos conjecture. We use a synoptic map for Carrington Rotation 1913 as the boundary condition for the model, with two small bipoles introduced into the region where a positive polarity extended coronal hole forms. We introduce flows at the photospheric boundary surface to see if open flux associated with the bipoles can be moved into the closed-field region. Interchange reconnection does occur in response to these motions. However, we find that the open magnetic flux cannot be simply injected into closed-field regions - the flux eventually closes down and disconnected flux is created. Flux either opens or closes, as required, to maintain topologically distinct open and closed field regions, with no indiscriminate mixing of the two. The early evolution conforms to the Antiochos conjecture in that a narrow corridor of open flux connects the portion of the coronal hole that is nearly detached by one of the bipoles. In the later evolution, a detached coronal hole forms, in apparent violation of the Antiochos conjecture. Further investigation reveals that this detached coronal hole is actually linked to the extended coronal hole by a separatrix footprint on the photosphere of zero width. Therefore, the essential idea of the conjecture is preserved, if we modify it to state that coronal holes in the same polarity region are always linked, either by finite width corridors or separatrix footprints. The implications of these results for interchange reconnection and the sources of the slow solar wind are briefly discussed.

Linker, Jon A.↗

Coronal roots of solar wind streams: 3-D MHD modeling

Weak (discontinuous) solutions of the 3-D MHD equations look like a promising tool to model the transonic solar wind with structural elements: current sheets, coronal plumes etc. Using the observational information about various coronal emissions one can include these structural elements into the 3-D MHD solar wind model by embedding the discontinuities of given type. Such 3-D MHD structured solar wind is calculated self-consistently: variants are examined via numerical experiments. In particular, the behavior of coronal plumes in the transonic solar wind flow, is modeled. The input information for numerical modeling (for example, the magnetic field map at the very base of the solar corona) can be adjusted so that fast stream arises over the center of the coronal hole, over the coronal hole boundaries and, even, over the region with closed magnetic topology. 3-D MHD equations have the analytical solution which can serve as a model of supersonic trans-alfvenic solar wind in the (5-20) solar radii heliocentric distance interval. The transverse, nonradial total (gas + magnetic field) pressure balance in the flow is the corner-stone of this solution. The solution describes the filamentation (ray-like structure of the solar corona) and streaming (formation of high-speed streams with velocities up to 800 km/sec) as a consequence of the magnetic field spatial inhomogeneous structure and trans-alfvenic character of the flow. The magnetic field works in the model as a 'controller' for the solar wind streaming and filamentation.

Pisanko, Yu. V.↗

The phase mixing of Alfven waves, coordinated modes, and coronal heating

Phase mixing has been a popular theoretical mechanism invoked to dissipate the photospheric plane shear Alfven waves hypothesized to penetrate up into the coronal hole and solar wind, thereby maintaining the expanding coronal gas at 1.5 million K and serving as the principal energy source for the solar wind. However, phase mixing requires an ignorable coordinate, which is not available in the presumably filamentary coronal hole. The filamentary density and temperature of the coronal hole couple the waves into a coordinated mode with a unique phase velocity omega/k, which provides the other popular theoretical mechanism, viz, resonant absorption where the local Alfven speed C is equal to omega/k. This provides coronal heating at radial distances O(10 solar radii), where it serves to accelerate the solar wind to high velocity. But it does not provide the principal heat input in the first 1-2 solar radii, required by Withbroe's (1988) analysis of the observed structure of the coronal hole.

Parker, E. N.↗

IRIS and SDO Observations of Solar Jetlets Resulting from Flux Cancelation

Jets of all sizes are frequent magnetically channeled narrow eruptions. They occur in various solar environments: quiet regions, coronal holes and active regions. All coronal jets observed in UV, EUV and X-ray images show a bright spire with a base brightening, also known as jet bright point (JBP). Recent studies show that coronal jets are driven by small-scale filament eruptions. We found in on disk quiet regions and coronal holes that coronal jets originate at a neutral line between dominant-polarity flux and a patch of canceling minority-polarity flux.

Panesar, Navdeep K.↗

Magnetic Flux Cancellation as the Trigger Mechanism of Solar Coronal Jets

Coronal jets are narrow eruptions in the solar corona, and are often observed in extreme ultraviolet (EUV) and X-Ray images. They occur everywhere on the solar disk: in active regions, quiet regions, and coronal holes (Raouafi et al. 2016). Recent studies indicate that most coronal jets in quiet regions and coronal holes are driven by the eruption of a minifilament (Sterling et al. 2015), and that this eruption follows flux cancellation at the magnetic neutral line under the pre-eruption minifilament (Panesar et al. 2016). We confirm this picture for a large sample of jets in quiet regions and coronal holes using multithermal extreme ultraviolet (EUV) images from the Solar Dynamics Observatory (SDO)/Atmospheric Imaging Assembly (AIA) and line-of-sight magnetograms from the SDO/Helioseismic and Magnetic Imager (HMI). We report observations of 60 randomly selected jet eruptions. We have analyzed the magnetic cause of these eruptions and measured the base size and the duration of each jet using routines in SolarSoft IDL. By examining the evolutionary changes in the magnetic field before, during, and after jet eruption, we found that each of these jets resulted from minifilament eruption triggered by flux cancellation at the neutral line. In agreement with the above studies, we found our jets to have an average base diameter of 7600 +/- 2700 km and an average jet-growth duration of 9.0 +/- 3.6 minutes. These observations confirm that minifilament eruption is the driver and that magnetic flux cancellation is the primary trigger mechanism for nearly all coronal hole and quiet region coronal jet eruptions.

McGlasson, Riley A.↗