Search NASA⌕ Search

SEARCH · Search NASA

Results for “crossover”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Design method for four-reflector type beam waveguide systems

Discussed is a method for the design of four reflector type beam waveguide feed systems, comprised of a conical horn and 4 focused reflectors, which are used widely as the primary reflector systems for communications satellite Earth station antennas. The design parameters for these systems are clarified, the relations between each parameter are brought out based on the beam mode development, and the independent design parameters are specified. The characteristics of these systems, namely spillover loss, crosspolarization components, and frequency characteristics, and their relation to the design parameters, are also shown. It is also indicated that design parameters which decide the dimensions of the conical horn or the shape of the focused reflectors can be unerringly established once the design standard for the system has been selected as either: (1) minimizing the crosspolarization component by keeping the spillover loss to within acceptable limits, or (2) minimizing the spillover loss by maintaining the crossover components below an acceptable level and the independent design parameters, such as the respective sizes of the focused reflectors and the distances between the focussed reflectors, etc., have been established according to mechanical restrictions. A sample design is also shown. In addition to being able to clarify the effects of each of the design parameters on the system and improving insight into these systems, the efficiency of these systems will also be increased with this design method.

Betsudan, S.↗
NASA NTRS1987

Radial orbit error reduction and sea surface topography determination using satellite altimetry

A method is presented in satellite altimetry that attempts to simultaneously determine the geoid and sea surface topography with minimum wavelengths of about 500 km and to reduce the radial orbit error caused by geopotential errors. The modeling of the radial orbit error is made using the linearized Lagrangian perturbation theory. Secular and second order effects are also included. After a rather extensive validation of the linearized equations, alternative expressions of the radial orbit error are derived. Numerical estimates for the radial orbit error and geoid undulation error are computed using the differences of two geopotential models as potential coefficient errors, for a SEASAT orbit. To provide statistical estimates of the radial distances and the geoid, a covariance propagation is made based on the full geopotential covariance. Accuracy estimates for the SEASAT orbits are given which agree quite well with already published results. Observation equations are develped using sea surface heights and crossover discrepancies as observables. A minimum variance solution with prior information provides estimates of parameters representing the sea surface topography and corrections to the gravity field that is used for the orbit generation. The simulation results show that the method can be used to effectively reduce the radial orbit error and recover the sea surface topography.

Engelis, Theodossios↗
NASA NTRS1987

Seasonal variability of the Gulf Stream from satellite altimetry

The nearly continuous 3.5 years of altimeter data in the western North Atlantic Ocean from the GEOS 3 mission (April 1975 to November 1978) have been used to study the seasonal variability of the Gulf Stream. The differences between altimetric measurements of sea surface height made at satellite ground track intersections, called crossovers, are utilized to construct time series of sea level variations. The results indicate that the Gulf Stream in the region off Cape Hatteras has a pronounced seasonal variability. The peak-to-peak amplitude of the seasonal cycle in terms of cross-stream sea level difference is about 15 cm, with a maximum in April and a minimum in December. The result is in good agreement with historic hydrographic observations and recent direct measurements of the Gulf Stream. The mechanisms responsible for the observed seasonal variability are discussed.

Fu, Lee-Lueng↗
NASA NTRS1987

Ion escape fluxes from the terrestrial high-latitude ionosphere

In this paper, the hydrodynamic transport equations for H(+) and O(+) are solved, including the important dynamic, collisional, and chemical effects that operate in the F region ionosphere below regions of ion acceleration. It is found that the most important parameter controlling the amount of O(+) in plasma outflows is the total ion flux demand imposed on the ionosphere by the higher-altitude acceleration region. The O(+) content is further modulated by the temperature of the exosphere and the resultant composition in the topside ionosphere, and by the location of the lower boundary of the ion acceleration region relative to the crossover altitude, where O and H have equal densities. As solar activity increases, the limiting O(+) escape flux increases, while the limiting H(+) escape flux decreases.

Barakat, A. R.↗
NASA NTRS1988

Average low-latitude meridional electric fields from DE 2 during solar maximum

The average meridional electric field (zonal ion flow) patterns in the region between +/- 30 deg magnetic latitude were obtained by analyzing the electric field data taken by the Vector Electric Field Instrument aboard the DE 2 spacecraft during solar maximum conditions. The average data set displayed a rapid increase of the downward meridional electric field with local time near 1800 MLT; there was a secondary nighttime maximum of this electric field component, observed post midnight, with the crossover to upward electric fields (westward ion flow) occurring between 0400 and 0500 MLT. A sharp return to near zero was observed between 1200 and 1300. The zonal ion drift was found to be approximately symmetric with respect to the geomagnetic equator. These results are compared with results of the DE-2 neutral wind measurements and with results obtained from radar measurements.

Maynard, N. C.↗
NASA NTRS1988

Dependence of image grey values on topography in SIR-B images

This paper focuses on the use of a high resolution digital elevation model (DEM) to aid in rectifying and enhancing synthetic aperture radar images. Using a synthetic backscatter image, the SIR-B images are manually rectified and resampled to remove geometric distortions caused by topography. In a second step, an improved reflectance function of incidence angle is derived from the DEM and the rectified image and this function is used to reduce radiometric effects of topography yielding an albedo image which clearly shows the thematic, as opposed to topographic content of the image. The procedure is tested on four SIR-B images of a scene in Argentina (crossover point) that is imaged under different azimuth and incidence angles. The similarity of the resulting images indicates that the procedure effectively reduces artefacts from the images that are dependent on topography.

Domik, G.↗
NASA NTRS1988

On the simultaneous improvement of a satellite orbit and determination of sea surface topography using altimeter data

A method is presented in satellite altimetry that attempts to simultaneously determine the geoid and sea surface toography with minimum wavelengths of about 500 km and to reduce the radial orbit errors caused by geopotential uncertainties. The modeling of these errors is made using the linearized Lagrangian perturbation theory. Observation equations are developed using sea surface heights and crossover discrepancies as observables. A minimum variance solution with prior information can then provide estimates of parametrs representing the sea surface topography and corrections to the orbit. The potential of the method is demonstrated in a solution where simulated geopotential errors and the Levitus sea surface topography are used to generate the observables for a Seasat 3 day arc. The simulation results suggest that the method can be used to efficiently process real altimeter data.

Engelis, Theodossios↗
NASA NTRS1989

An improved model for the Earth's gravity field

An improved model for the Earth's gravity field, TEG-1, was determined using data sets from fourteen satellites, spanning the inclination ranges from 15 to 115 deg, and global surface gravity anomaly data. The satellite measurements include laser ranging data, Doppler range-rate data, and satellite-to-ocean radar altimeter data measurements, which include the direct height measurement and the differenced measurements at ground track crossings (crossover measurements). Also determined was another gravity field model, TEG-1S, which included all the data sets in TEG-1 with the exception of direct altimeter data. The effort has included an intense scrutiny of the gravity field solution methodology. The estimated parameters included geopotential coefficients complete to degree and order 50 with selected higher order coefficients, ocean and solid Earth tide parameters, Doppler tracking station coordinates and the quasi-stationary sea surface topography. Extensive error analysis and calibration of the formal covariance matrix indicate that the gravity field model is a significant improvement over previous models and can be used for general applications in geodesy.

Tapley, B. D.↗
NASA NTRS1990

QPSK loop lock detection in the advanced receiver

The Advanced Receiver (ARX 2) currently being developed uses a Costas crossover loop to acquire and track the phase of an incoming quadrature phase-shift-keyed (QPSK) signal. The performance is described for the QPSK lock detector to be implemented, taking into account the phase jitter in the tracking loop. Simulations are used to verify the results of the analysis.

Mileant, A.↗
NASA NTRS1989

Equatorially generated ULF waves as a source for the turbulence associated with ion conics

Consideration is given to the possible source of low frequency turbulence on closed field lines in the central plasma sheet, which is used to explain ion heating and conic formation. Observations show that ion distributions in the equatorial region are often anisotropic and that these distributions excite ion cyclotron waves below the proton gyrofrequency and near the harmonics of the hydrogen cyclotron frequency. It is suggested that downcoming right-hand circularly polarized waves acquire a left-hand circularly polarized component at the crossover frequency and may tunnel through a stop zone to altitudes where they contribute to ion heating.

Johnson, Jay R.↗
NASA NTRS1990

Mean sea surface and variability of the Gulf of Mexico using Geosat altimetry data

Geosat Exact Repeat Mission (ERM) altimetric measurements of the sea surface height in the Gulf of Mexico are used to determine the mean sea surface height with respect to the ellipsoid and mesoscale variability along Geosat ground tracks in the gulf for the time period from November 8, 1986 to November 25, 1988. A mean surface generated using the Geosat ERM along-track mean is calculated and contrasted with a previously derived mean surface determined using GEOS 3 and Seasat crossover differences. This provides a first look at the variability in the mean between the time periods of 1987-1988 and 1975-1978. In addition, the along-track mesoscale variability time series has been produced from the Geosat ERM data set by using a robust orbit-error removal algorithm to determine the variability of the sea-surface height with respect to the along-track mean. Good qualitative and quantitative agreement with previous in situ observations in the region is found. This study demonstrates the potential of satellite altimetry for oceanographic studies of the Gulf of Mexico.

Leben, Robert R.↗
NASA NTRS1990

Buoyancy-driven melt segregation in the earth's moon. I - Numerical results

The densities of lunar mare magmas have been estimated at liquidus temperatures for pressures from 0 to 47 kbar (0.4 GPa; center of the moon) using a third-order Birch-Murnaghan equation and compositionally dependent parameters from Large and Carmichael (1987). Results on primary magmatic compositions represented by pristine volcanic glasses suggest that the density contrast between very-high-Ti melts and their liquidus olivines may approach zero at pressures of about 25 kbar (2.5 GPa). Since this is the pressure regime of the mantle source regions for these magmas, a compositional limit of eruptability for mare liquids may exist that is similar to the highest Ti melt yet observed among the lunar samples. Although the moon may have generated magmas having greater than 16.4 wt pct TiO2, those melts would probably not have reached the lunar surface due to their high densities, and may have even sunk deeper into the moon's interior as negatively buoyant diapirs. This process may have been important for assimilative interactions in the lunar mantle. The phenomenon of melt/solid density crossover may therefore occur not only in large terrestrial-type objects but also in small objects where, despite low pressures, the range of melt compositions is extreme.

Delano, J. W.↗
NASA NTRS1990

Critical exponent for the viscosity of carbon dioxide and xenon

The viscosities of carbon dioxide and xenon have been measured near their critical points and the critical exponent y characterizing the asymptotic divergence has been determined. Both fluids yielded exponents in the range y = 0.041 + or - 0.001 and thus also fell in the range y = 0.042 + or - 0.002 from an earlier study of four binary liquids. This agreement between experiments is the first evidence that pure fluids and binary liquids are in the same dynamic universality class. A recent theoretical value for y is 0.032. The 30 percent discrepancy is much greater than the combined errors from experiment and theory. The torsion oscillator viscometer operated at low frequency and low shear rate to avoid systematic errors caused by critical slowing down. Far from T(c) the analysis accounted for the crossover from critical to noncritical temperature dependence, where the latter was obtained from previously published correlations. Corrections for gravitational stratification were included close to T(c).

Berg, R. F.↗
NASA NTRS1990

Cirrus microphysics and radiative transfer: A case study

During the Cirrus Intensive Field Operations of FIRE, data collected by the NCAR King Air in the vicinity of Wausau, WI on October 28 were selected to study the influence of cirrus cloud microphysics on radiative transfer and the role of microphysical approximations in radiative transfer models. The instrumentation of the King Air provided, aside from temperature and wind data, up-and downwelling broadband solar and infrared fluxes as well as detailed microphysical data. The aircraft data, supplied every second, are averaged over the 7 legs to represent the properties for that altitude. The resulting vertical profiles, however, suffer from the fact that each leg represents a different cloud column path. Based on the measured microphysical data particle size distributions of equivalent spheres for each cloud level are developed. Accurate radiative transfer calculations are performed, incorporating atmospheric and radiative data from the ground and the stratosphere. Comparing calculated to the measured up- and downwelling fluxes at the seven cloud levels for both the averaged and the three crossover data will help to assess the validity of particle size and shape approximation as they are frequently used to model cirrus clouds. Once agreement is achieved the model results may be applied to determine, in comparison to a cloudfree case, the influence of this particular cirrus on the radiation budget of the earth atmosphere system.

Kinne, Stefan A.↗
NASA NTRS1989

Effects of H2O, CO2, and N2 Air Contaminants on Critical Airside Strain Rates for Extinction of Hydrogen-Air Counterflow Diffusion Flames

Coaxial tubular opposed jet burners (OJB) were used to form dish shaped counterflow diffusion flames (CFDF), centered by opposing laminar jets of H2, N2 and both clean and contaminated air (O2/N2 mixtures) in an argon bath at 1 atm. Jet velocities for flame extinction and restoration limits are shown versus wide ranges of contaminant and O2 concentrations in the air jet, and also input H2 concentration. Blowoff, a sudden breaking of CFDF to a stable ring shape, occurs in highly stretched stagnation flows and is generally believed to measure kinetically limited flame reactivity. Restore, a sudden restoration of central flame, is a relatively new phenomenon which exhibits a H2 dependent hysteresis from Blowoff. For 25 percent O2 air mixtures, mole for mole replacement of 25 percent N2 contaminant by steam increased U(air) or flame strength at Blowoff by about 5 percent. This result is consistent with laminar burning velocity results from analogous substitution of steam for N2 in a premixed stoichiometric H2-O2-N2 (or steam) flame, shown by Koroll and Mulpuru to promote a 10 percent increase in experimental and calculated laminar burning velocity, due to enhanced third body efficiency of water in: H + O2 + M yields HO2 + M. When the OJB results were compared with Liu and MacFarlane's experimental laminar burning velocity of premixed stoichiometric H2 + air + steam, a crossover occurred, i.e., steam enhanced OJB flame strength at extinction relative to laminar burning velocity.

Pellett, G. L.↗
NASA NTRS1991

Compression behavior of TiB2-particulate-reinforced composites of Al22Fe3Ti8

The compression behavior of both the monolithic L1(2) compound Al22Fe3Ti8 and discontinuous composites obtained by incorporating about 1 micron TiB2 particles was studied for various volume percent reinforcements as a function of temperature and at high temepratures as a function of strain rate. In this study, by varying the Fe and Ti contents, the nature and volume fraction of the minor phases coexisting with the dominant L1(2) phase were changed and were examined with and without TiB2 reinforcement. At high strain rates, the TiB2 reinforcements significantly enhance ambiant and warm-temperature strength, although a crossover is observed at about 1000 K, above which the monolithic material is stronger than the composite. At slow strain rates representative of creep conditions, however, the TiB2-containing composites retain their superiority at least up to 1200 K.

Dipietro, M. S.↗
NASA NTRS1991

Global Expression for Representing Diatomic Potential-Energy Curves

A three-parameter expression that gives an accurate fit to diatomic potential curves over the entire range of separation for charge transfers between 0 and 1. It is based on a generalization of the universal binding-energy relation of Smith et al. (1989) with a modification that describes the crossover from a partially ionic state to the neutral state at large separations. The expression is tested by comparison with first-principles calculations of the potential curves ranging from covalently bonded to ionically bonded. The expression is also used to calculate spectroscopic constants form a curve fit to the first-principles curves. A comparison is made with experimental values of the spectroscopic constants.

Ferrante, John↗
NASA NTRS1991

Spectral comparison of continuous Global Positioning System and strainmeter measurements of crustal deformation

Temporal power spectral density models of noise in continuous crustal deformation measurements obtained with the Global Positioning System (GPS) and high-quality strainmeters are compared. The crossover frequency at which GPS measurement noise is less than that of strainmeters is determined. Assuming GPS precision of 0.1 to 1 cm in horizontal components for baselines up to 100 km in length, local deformation monitoring with GPS may be preferable to strainmeters for observations of short-term deformation in under 6 months of continuous (at least daily) measurements. Short-period tropospheric path delays and multipath effects, which may obscure GPS-determined strain signals in local network measurements, also are discussed.

Tralli, David M.↗