Search NASA⌕ Search

SEARCH · Search NASA

Results for “data versions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Monthly Oceanic Rainfall from TRMM Microwave Imager (TMI) Data

We evaluated the performance of the Tropical Rainfall Measuring Mission (TRMM) Microwave Imager (TMI) at-launch algorithm for monthly oceanic rain rate using two years (January 1998 - December 1999) of TMI data. The TMI at-launch algorithm is based on Wilheit et al.'s technique for estimating monthly oceanic rainfall that relies on histograms of multichannel microwave measurements. Comparisons with oceanic monthly rain rates derived from the Defense Meteorological Satellite Program (DMSP) F-13 and F-14 Special Sensor Microwave Imager (SSM/I) data show the average rain rates over the TRMM region (between 400S and 40N) are 3.0, 2.85 and 2.89 mm/day, respectively for F-13, F-14 and TMI. Based on the latest version of TB data (version 5), both rainrate and freezing height derived from TMI are similar to those from the F-13 and F-14 SSM/I data. However, regionally the differences are statistically significant at the 95% confidence. Three hourly monthly rainrates are also computed from 3-hourly TB histograms to examine the diurnal cycle of precipitation. Over most of the oceanic TRMM area, a distinct early morning rainfall peak is found. A harmonic analysis shows that the amplitude of the 12h harmonic is significant and comparable to that of the 24h harmonic.

Chang, Alfred T. C.↗

Validation of CALIPSO Lidar Observations Using Data From the NASA Langley Airborne High Spectral Resolution Lidar

This poster focuses on preliminary comparisons of data from the Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) instrument on the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO) spacecraft with data acquired by the NASA Langley Airborne High Spectral Resolution Lidar (HSRL). A series of 20 aircraft validation flights was conducted from 14 June through 27 September 2006, under both day and night lighting conditions and a variety of aerosol and cloud conditions. This poster presents comparisons of CALIOP measurements of attenuated backscatter at 532 and 1064 nm and depolarization at 532 nm with near coincident measurements from the Airborne HSRL as a preliminary assessment of CALIOP calibration accuracy. Note that the CALIOP data presented here are the pre-release version. These data have known artifacts in calibration which have been corrected in the December 8 CALIPSO data release which was not available at the time the comparisons were conducted for this poster. The HSRL data are also preliminary. No artifacts are known to exist; however, refinements in calibration and algorithms are likely to be implemented before validation comparisons are made final.

Hostetler, Chris↗

Impact of Assimilating AIRS Cloud-Cleared Radiances on Atmospheric Dynamics and Boundary Layer Height at High Latitudes

High latitude weather forecasts, on scales ranging from mesoscale to synoptic, present difficulties due, in part, to the sparsity of conventional observations. In addition, the prevalence of extended low-level stratus cloud cover limits the use of infrared data, which are operationally assimilated only in areas unaffected by clouds. Use of cloud-cleared AIRS (Atmospheric Infrared Sounder) radiances (AIRS CCR), allows the assimilation of infrared information in cloudy regions, permitting data ingestion in regions usually undersampled. This study explores the sensitivity of planetary boundary layer height and related atmospheric dynamics to the assimilation of these data in the Goddard Earth Observing System (GEOS, version 5) data assimilation and forecast system during the boreal fall 2014 season using observing system experiments (OSEs). Examined here are comparisons between the current, operational approach of assimilating AIRS clear-sky radiances against the assimilation of CCR. Assimilation of hyperspectral infrared information from AIRS over the Arctic region slightly modifies the lower midtropospheric temperature structure, which in turn contributes to adjustments in geopotential height, affecting the baroclinic instability properties over the entire hemisphere and explaining the overall improvement in global forecast skill.

McGrath-Spangler, E. L.↗

Comparison of TOMS, SBW & SBUV/2 Version 8 Total Column Ozone Data with Data from Groundstations

The Nimbus-7 and Earth Probe Total Ozone Mapping Spectrometer (TOMS) data as well as SBUV and SBUV/2 data have been reprocessed with a new retrieval algorithm (Version 8) and an updated calibration procedure. An overview will be presented systematically comparing ozone values to an ensemble of Brewer and Dobson spectrophotometers. The comparisons were made as a function of latitude, solar zenith angle, reflectivity and total ozone. Results show that the accuracy of the TOMS retrieval has been improved when aerosols are present in the atmosphere, when snow/ice and sea glint are present, and when ozone in the northern hemisphere is extremely low. TOMS overpass data are derived from the single TOMS best match measurement, almost always located within one degree of the ground station and usually made within an hour of local noon. The Version 8 Earth Probe TOMS ozone values have decreased by an average of about 1% due to a much better understanding of the calibration of the instrument. N-7 SBUV as well as the series of NOAA SBUV/2 column ozone values have also been processed with the Version 8 algorithm and have been compared to values from an ensemble of groundstations. Results show that the SBW column ozone values agree well with the groundstations and the datasets are useful for trend studies.

Labow, G. J.↗

Sandia Data Archive (SDA) file specifications

The Sandia Data Archive (SDA) format is a specific implementation of the HDF5 (Hierarchal Data Format version 5) standard. The format was developed for storing data in a universally accessible manner. SDA files may contain one or more data records, each associated with a distinct text label. Primitive records provide basic data storage, while compound records support more elaborate grouping. External records allow text/binary files to be carried inside an archive and later recovered. This report documents version 1.0 of the SDA standard. The information provided here is sufficient for reading from and writing to an archive. Although the format was original designed for use in MATLAB, broader use is encouraged.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

EP/TOMS Science Data Processing Programmer's Guide. Version 1.9

This EP/TOMS Programmer's Guide provides detailed information concerning the data, software, operations, and maintenance of the EP/TOMS Science Data Processing System. This system was developed for the NASA Goddard Space Flight Center (GSFC), Laboratory for Atmospheres, Atmospheric Chemistry Branch (Code 916) by SSAI. The description of the EP/TOMS Science Data Processing System starts with an overall system perspective (Section 3). A description of all data files ingested, stored, and/or produced follows in Section 4. Detailed descriptions of each major software subsystem are in Section 5. Section 6 presents processing procedures. Section 7 presents maintenance procedures. Procedures for updating this document are included in Section 7.

Source record↗

Arctic shrub root traits, northern Alaska, summer 2017 (Version 2.0)

This data package contains root trait data collected from 170 plots of rapidly expanding shrub genera (Alnus, Betula, and Salix) and a widespread sedge (Eriophorum vaginatum) along a latitudinal and temperature gradient in northern Alaska. The trait data were collected in July 2017 and include root architecture (root diameter and branching patterns), mycorrhizal colonization (%), nitrogen concentration (%), delta 15N (per mil), and vertical root biomass. These raw data support a submitted manuscript that examines the distribution and interspecific variations of absorptive root traits of shrubs and graminoids across the graminoid-dominated nutrient-poor arctic tundra and reveals how deciduous shrub expansion affects plant nutrient acquisition strategies in tundra ecosystems. Data are presented by site (n=5) and patch (shrub or sedge plot) in separate csv files. The location data are provided in the “plot coordinates” file; all other files contain the data in the file title. Detailed methods are in Chen et al. (2020).2023/07/20 Update: The latest version of this dataset publication is version 2.0. The latest version of the data package was updated to include the alder nodule biomass dataset (alder nodule biomass.csv) and associated metadata (metadata_alder nodule biomass.csv). The name of the previous metadata file was updated (metadata_ root traits and biomass.csv ) to distinguish it from the new metadata file.

54 ENVIRONMENTAL SCIENCES↗

Monthly Quality-filtered Aggregation of NOAA Climate Data Record (CDR) of AVHRR (Version 5) and VIIRS (Version 1) Leaf Area Index (LAI) and Fraction of Absorbed Photosynthetically Active Radiation (FAPAR)

This dataset contains gridded monthly Leaf Area Index (LAI) derived from the daily NOAA Climate Data Record (CDR) of AVHRR (Version 5) and VIIRS (Version 1) Leaf Area Index (LAI) and Fraction of Absorbed Photosynthetically Active Radiation (FAPAR). This data record spans from 1981 to 2024 using data from NOAA polar orbiting satellites: NOAA-7, -9, -11, -14, -16, -17, -18, -19 and S-NPP. The data are projected on a 0.05 degree x 0.05 degree global grid, as in the original CDR. The original CDR is one of the Land Surface CDR products produced by the NASA Goddard Space Flight Center (GSFC) and the University of Maryland (UMD), which is accompanied by algorithm documentation, data flow diagram and source code for the NOAA CDR Program. This dataset is in the netCDF-4 file format following ACDD and CF Conventions. This dataset has applied quality assurance information to only include "OK" data from the original CDR in the monthly aggregation.

Vermote, Eric [NASA Goddard Space Flight Center (G↗

High Performance Access to Archival Data Stored in HDF4 and HDF5 on Cloud Object Stores Without Reformatting the Files

Cloud computing offers numerous advantages for users of extensive Earth science data collections. These benefits encompass direct online access to data files and granules from any location, scalable access supporting parallel computing workflows, and flexible computing tools enabling innovative experimentation with processing techniques. However, older archival file formats designed for distinct computing systems hinder efficient access to decade-long time-series data when compared to data stored in modern cloud-optimized formats like Web Object Stores (WOS), exemplified by Amazon Web Services’ Simple Storage Service (S3). We describe DMR++ (Dataset Metadata Response plus plus), a technology facilitating efficient access to HDF5 (Hierarchical Data Format, version 5) and HDF4 files stored on WOS systems without requiring data reformatting. DMR++ achieves performance comparable to technologies like Zarr while preserving the original file structure, a substantial benefit considering the vast quantity of archival files held by organizations such as NASA. Moreover, DMR++ typically outperforms cloud-optimized versions of HDF5. Essentially an XML (Extensible Markup Language) document usually stored alongside the described data, DMR++ can also be generated on-the-fly but is generally created during data staging to the WOS. Archival files that use HDF4/5 often store large arrays of numerical data. The data in these files is often compressed, typically reducing their size by a factor of four or more. To achieve efficient access to portions of those arrays, they are 'chunked' into smaller sub-arrays, each individually compressed. The chunk size is a compromise, where spinning disks can efficiently access data in smaller chunks while S3 favors larger chunks. A simple optimization of aggregating smaller chunks that are stored adjacently, transferring them in a single access and then individually decompressing them will improve performance. NASA data pose an additional challenge: special Application Programmer Interface (API) libraries are often needed to compute some variables. These libraries are incompatible with WOS environments. Our solution involves storing computed values in the DMR++ document or a companion file, making them accessible like other variables and eliminating the need for specialized APIs. We outline specific optimizations for both satellite grid and swath data stored in HDF4-EOS2 (Earth Observing System).

James Gallagher↗

Status of the Shuttle SBUV (SSBUV) calibration of the NOAA SBUV/2 operational ozone sounders and the detection of trends

The Shuttle Solar Backscatter Ultraviolet (SSBUV) experiment has flown four times since October 1989. The purpose of SSBUV is to perform calibration checks of the SBUV ozone sounding instruments on the Nimbus and NOAA satellites in order to remove calibration drift so that ozone trends in the middle stratosphere can be accurately derived. Calibration checks are performed by comparing coincident observations between SSBUV and the satellite instruments. Regular flights of about once per year and maintenance of the SSBUV calibration to 1 percent from flight to flight are the major challenges for SSBUV. To date the required flight frequency has been met and instrument calibration is known to about 1-2 percent for the first three flights. The first comparisons showed 30 percent differences between SSBUV and the original archived Nimbus SBUV data, but considerably smaller differences with the new SBUV 'Version 6' data. Differences between SSBUV and SBUV/2 instruments on NOAA-11 and NOAA-9 were of the order of 5-10 percent respectively. These differences have not been accounted for in the present NOAA data set since they contain initial calibration biases as well as long term instrument drift. With subsequent SSBUV comparisons, the satellite calibration can be corrected, which will then allow an accurate estimate of ozone trends in the upper stratosphere. In this initial study, 1989 Nimbus-7 SBUV data have been corrected using SSBUV observations and then compared to SBUV data for 1980. This comparison then leads to an ozone trend of 7 percent in the upper stratosphere over the tropics for the period 1980 to 1989.

Hilsenrath, Ernest↗

Processing Spacecraft Data Without Confusion

Producing multiple versions of the same data product for the same time frame with the same remotely sensed inputs can be a recipe for disaster. Yet, amidst the commotion of satellite launch and early operations (LEO), such data processing is needed. After LEO, the situation gets worse. Processing newly arriving data ("forward processing") is augmented with reprocessing and algorithm development, comparison, evaluation, and testing -- often happening all at the same time. The problem can be analyzed in three main parts -- maintaining multiple versions of algorithms and data so that end-product users are not overwhelmed,allocating computer resources efficiently, and simplifying production operations so that va st amounts of data can be processed with minimal staff and fewer errors. OMIDAPS provides a framework for execution of algorithms that transform lower level data acquired by OMI on NASA's Aura satellite into higher level science data products. In contrast to traditional science data processing systems, we address all parts of the problem with an innovative approach allowing multiple data processing to run within a single physical system. The data products, imports, exports, and execution planning are all segregated into distinct "ArchiveSets." This paper describes reasons for multiple concurrent productions on a typical satellite data processing project using OMI as an example. It describes the virtual data processing system concept and its advantages over separate physical processing strings. It explores the specific implementation of the virtual systems within OMIDAPS and discusses some of the implications of our approach and describes how virtual processing is used to accomplish the overall mission of OMI data processing.

Tilmes, Curt↗

Arctic shrub size and leaf traits, northern Alaska, summer 2017 (Version 2.0)

This data package contains leaf and size trait and environmental data collected from 170 plots of rapidly expanding shrub genera (Alnus, Betula, and Salix) and a widespread sedge (Eriophorum vaginatum) along a latitudinal and climate gradient in northern Alaska. The trait data were collected in summer 2017 and include leaf area, specific leaf area, leaf nitrogen concentration, leaf delta 15N, leaf delta 13C, shrub height, aboveground biomass, and the ratio of root biomass to aboveground biomass. These raw data support a submitted manuscript that examines the intraspecific variations of size, leaf and root traits of shrubs across the graminoid-dominated nutrient-poor arctic tundra and reveals the environmental drivers of deciduous shrub traits in tundra ecosystems (Fraterrigo et al., submitted). Data are presented by site (n=5) and patch (shrub or sedge plot) in separate csv files. The location data are provided in the “plot coordinates” file; all other files contain the data in the file title. Detailed methods are in the submitted manuscript. A companion data package contains root trait data collected simultaneously from the same plots (Fraterrigo and Chen, 2020). See the "Related references" section for more information.2023/07/20 Update: The latest version of this dataset publication is version 2.0. The latest version of the data package was updated to correct the leaf size trait.csv file.

54 ENVIRONMENTAL SCIENCES↗

An Investigation of Aerosol and Ozone Measurements from the Cryogenic Limb Array Etalon Spectrometer: Validation and Relation to Other Chemical Species

Throughout this study we focused on comparisons of CLAES and in situ measurements of ozone and aerosol extinction. Thus the comparison is between satellite data representative of large spatial regions and in situ data representative of nearly point samples. Both instruments provide vertical profiles, but the region of overlap is limited to between approximately 10 and 100 mb. CLAES Version 7 ozone measurements have been compared to electrochemical cell ozonesonde measurements over McMurdo Station, Antarctica (78 deg S, 167 deg E), Dumont d'Urville, Antarctica (66.7 deg S, 140 deg E), Laramie, Wyoming (41 deg N, 106 deg W), and Bear Island, Norway (74.3 deg N, 19 deg E). Comparisons were made between vertical ozone profiles, and between integrated column ozone over the region of overlap of the measurements. Comparisons using CLAES Version 8 data are underway. CLAES Version 8 aerosol extinction measurements at all wavelengths have also been compared to University of Wyoming aerosol extinctions over McMurdo Station, Antarctica, and over Laramie, Wyoming. Coincidences in all cases were determined by minimizing the distance between the CLAES observations and the surface station, and the time separation between the satellite and in situ measurements.

Deshler, Terry↗

LAI, EVI, NDVI, and kNDVI in 23 pantropical forests affected by 21 cyclones

Statement of purpose: Cyclones alter the function and composition of tropical forests, making effects of intensifying cyclones on carbon-rich forests a critical topic of study. Here, we quantified cyclone-induced damage and recovery of 21 cyclone disturbances affecting 23 pantropical forest sites between 1988-2017 utilizing leaf area index (LAI), enhanced vegetation index (EVI), normalized difference vegetation index (NDVI), and transformed NDVI (kNDVI) values from Google Earth Engine. Field observations collected in a meta-analysis (Bomfim et al., 2022, in review) were used to ground-truth and test effects of soil resource availability and disturbance factors on damage and recovery. This meta-analysis also served as the basis to begin vegetation index extraction, utilizing unique site and date combinations, from tropical forests effect by cyclone disturbances. We began collecting NDVI (5km resolution) from the NOAA Climate Data Record (CDR) of AVHRR Normalized Difference Vegetation Index (NDVI), Version 5 data product (Vermote, 2019) for all case studies included, 42. Next, we began extracting Landsat data from Landsat 4, 5, and 8, courtesy of the U.S. Geological Survey, in search of higher resolution data. We selected a 3 by 3 Landsat pixel area, leading to a 90m resolution data extraction. The specific imagery used includes Landsat 4 USGS Landsat 4 TM Collection 1 Tier 1 TOA (top of atmosphere) Reflectance, Landsat 5 USGS Landsat 5 TM (thematic mapper) Collection 1 Tier 1 TOA Reflectance, and Landsat 8 USGS Landsat 8 Collection 1 Tier 1 TOA Reflectance. Within Google Earth Engine, we selected the date and location (latitude and longitude), calculated NDVI, kNDVI, and EVI utilizing Landsat bands (see metadata_NGEE-tropics_cyclones), and extracted post- and pre-cyclone values for each case study to calculate cyclone-induced change in the vegetative index. Due to limited spatial resolution of Landsat remote sensing data, MODIS products were investigated next. First, the MOD13Q1.006 Terra Vegetation Indices 16-Day Global 250m product was used to extract 250m EVI and NDVI (Didan, 2015) and then the MCD15A3H.006 MODIS Leaf Area Index/FPAR 4-Day Global 500m product product was used to extract LAI 500m (Myneni et al., 2015). Pre- and post-cyclone values, change in the vegetative index, and standard deviation for all values are included in the main csv (see case_study_data.csv) for all vegetative indices collected, including LAI 500m, EVI 250m, NDVI 250m, NDVI 90m, kNDVI 90m, EVI 90m, and NDVI 5km. Lastly, recovery values were calculated utilizing a standardization method (see metadata_NGEE-tropics_cyclones) and recovery values for MODIS (see MODIS_recovery.csv) and Landsat (Landsat_recovery.csv) data are included.

54 ENVIRONMENTAL SCIENCES↗

xdamp Version 6: An IDL®-based Data and Image Manipulation Program

The original DAMP (DAta Manipulation Program) was written by Mark Hedemann of Sandia National Laboratories and used the CA-DISSPLA™ (available from Computer Associates International, Inc., Garden City, NY) graphics package as its engine. It was used to plot, modify, and otherwise manipulate the one-dimensional data waveforms (data vs. time) from a wide variety of accelerators. With the waning of CA-DISSPLA and the increasing popularity of Unix®-based workstations, a replacement was needed. This package uses the IDL® software, available from Research Systems Incorporated, a Xerox company, in Boulder, Colorado, as the engine, and creates a set of widgets to manipulate the data in a manner similar to the original DAMP and earlier versions of xdamp. IDL is currently supported on a wide variety of Unix platforms such as IBM® workstations, Hewlett Packard workstations, SUN® workstations, Microsoft® Windows™ computers, Macintosh® computers and Digital Equipment Corporation VMS® and Alpha® systems. Thus, xdamp is portable across many platforms. We have verified operation, albeit with some minor IDL bugs, on personal computers using Windows 7 and Windows Vista; Unix platforms; and Macintosh computers. Version 6 is an update that uses the IDL Virtual Machine to resolve the need for licensing IDL.

43 PARTICLE ACCELERATORS↗

NASA Tech Briefs, September 2006

Topics covered include: Improving Thermomechanical Properties of SiC/SiC Composites; Aerogel/Particle Composites for Thermoelectric Devices; Patches for Repairing Ceramics and Ceramic- Matrix Composites; Lower-Conductivity Ceramic Materials for Thermal-Barrier Coatings; An Alternative for Emergency Preemption of Traffic Lights; Vehicle Transponder for Preemption of Traffic Lights; Automated Announcements of Approaching Emergency Vehicles; Intersection Monitor for Traffic-Light-Preemption System; Full-Duplex Digital Communication on a Single Laser Beam; Stabilizing Microwave Frequency of a Photonic Oscillator; Microwave Oscillators Based on Nonlinear WGM Resonators; Pointing Reference Scheme for Free-Space Optical Communications Systems; High-Level Performance Modeling of SAR Systems; Spectral Analysis Tool 6.2 for Windows; Multi-Platform Avionics Simulator; Silicon-Based Optical Modulator with Ferroelectric Layer; Multiplexing Transducers Based on Tunnel-Diode Oscillators; Scheduling with Automated Resolution of Conflicts; Symbolic Constraint Maintenance Grid; Discerning Trends in Performance Across Multiple Events; Magnetic Field Solver; Computing for Aiming a Spaceborne Bistatic- Radar Transmitter; 4-Vinyl-1,3-Dioxolane-2-One as an Additive for Li-Ion Cells; Probabilistic Prediction of Lifetimes of Ceramic Parts; STRANAL-PMC Version 2.0; Micromechanics and Piezo Enhancements of HyperSizer; Single-Phase Rare-Earth Oxide/Aluminum Oxide Glasses; Tilt/Tip/Piston Manipulator with Base-Mounted Actuators; Measurement of Model Noise in a Hard-Wall Wind Tunnel; Loci-STREAM Version 0.9; The Synergistic Engineering Environment; Reconfigurable Software for Controlling Formation Flying; More About the Tetrahedral Unstructured Software System; Computing Flows Using Chimera and Unstructured Grids; Avoiding Obstructions in Aiming a High-Gain Antenna; Analyzing Aeroelastic Stability of a Tilt-Rotor Aircraft; Tracking Positions and Attitudes of Mars Rovers; Stochastic Evolutionary Algorithms for Planning Robot Paths; Compressible Flow Toolbox; Rapid Aeroelastic Analysis of Blade Flutter in Turbomachines; General Flow-Solver Code for Turbomachinery Applications; Code for Multiblock CFD and Heat-Transfer Computations; Rotating-Pump Design Code; Covering a Crucible with Metal Containing Channels; Repairing Fractured Bones by Use of Bioabsorbable Composites; Kalman Filter for Calibrating a Telescope Focal Plane; Electronic Absolute Cartesian Autocollimator; Fiber-Optic Gratings for Lidar Measurements of Water Vapor; Simulating Responses of Gravitational-Wave Instrumentation; SOFTC: A Software Correlator for VLBI; Progress in Computational Simulation of Earthquakes; Database of Properties of Meteors; Computing Spacecraft Solar-Cell Damage by Charged Particles; Thermal Model of a Current-Carrying Wire in a Vacuum; Program for Analyzing Flows in a Complex Network; Program Predicts Performance of Optical Parametric Oscillators; Processing TES Level-1B Data; Automated Camera Calibration; Tracking the Martian CO2 Polar Ice Caps in Infrared Images; Processing TES Level-2 Data; SmaggIce Version 1.8; Solving the Swath Segment Selection Problem; The Spatial Standard Observer; Less-Complex Method of Classifying MPSK; Improvement in Recursive Hierarchical Segmentation of Data; Using Heaps in Recursive Hierarchical Segmentation of Data; Tool for Statistical Analysis and Display of Landing Sites; Automated Assignment of Proposals to Reviewers; Array-Pattern-Match Compiler for Opportunistic Data Analysis; Pre-Processor for Compression of Multispectral Image Data; Compressing Image Data While Limiting the Effects of Data Losses; Flight Operations Analysis Tool; Improvement in Visual Target Tracking for a Mobile Robot; Software for Simulating Air Traffic; Automated Vectorization of Decision-Based Algorithms; Grayscale Optical Correlator Workbench; "One-Stop Shopping" for Ocean Remote-Sensing and Model Data; State Analysis Database Tool; Generating CAHV and CAHVOmages with Shadows in ROAMS; Improving UDP/IP Transmission Without Increasing Congestion; FORTRAN Versions of Reformulated HFGMC Codes; Program for Editing Spacecraft Command Sequences; Flight-Tested Prototype of BEAM Software; Mission Scenario Development Workbench; Marsviewer; Tool for Analysis and Reduction of Scientific Data; ASPEN Version 3.0; Secure Display of Space-Exploration Images; Digital Front End for Wide-Band VLBI Science Receiver; Multifunctional Tanks for Spacecraft; Lightweight, Segmented, Mostly Silicon Telescope Mirror; Assistant for Analyzing Tropical-Rain-Mapping Radar Data; and Anion-Intercalating Cathodes for High-Energy- Density Cells.

Source record↗