Search NASA⌕ Search

SEARCH · Search NASA

Results for “deconvolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Surface and Structural Investigation of a MnO x Birnessite‐Type Water Oxidation Catalyst Formed under Photocatalytic Conditions

Abstract Catalytically active MnO x species have been reported to form in situ from various Mn‐complexes during electrocatalytic and solution‐based water oxidation when employing cerium(IV) ammonium ammonium nitrate (CAN) oxidant as a sacrificial reagent. The full structural characterization of these oxides may be complicated by the presence of support material and lack of a pure bulk phase. For the first time, we show that highly active MnO x catalysts form without supports in situ under photocatalytic conditions. Our most active 4 MnO x catalyst (∼0.84 mmol O 2 mol Mn −1 s −1 ) forms from a Mn 4 O 4 bearing a metal–organic framework. 4 MnO x is characterized by pair distribution function analysis (PDF), Raman spectroscopy, and HR‐TEM as a disordered, layered Mn‐oxide with high surface area (216 m 2 g −1 ) and small regions of crystallinity and layer flexibility. In contrast, the S MnO x formed from Mn 2+ salt gives an amorphous species of lower surface area (80 m 2 g −1 ) and lower activity (∼0.15 mmol O 2 mol Mn −1 s −1 ). We compare these catalysts to crystalline hexagonal birnessite, which activates under the same conditions. Full deconvolution of the XPS Mn2p 3/2 core levels detects enriched Mn 3+ and Mn 2+ content on the surfaces, which indicates possible disproportionation/comproportionation surface equilibria.

Deibert, Benjamin J.↗

Single-Filament Imaging Mass Spectrometry Lipidomics in Arthrospira platensis

Elucidating intra-organismal biochemical and lipid organization in photosynthetic biological cell factories of filamentous cyanobacteria, i.e., Arthrospira platensis (Spirulina), is important to track physiological response mechanisms during growth. Little is known about the filaments' biochemical organization and cellular structure and no label-free imaging techniques exist that provide molecular mapping. We applied ultra-high resolution mass spectrometry (7T FT-ICR-MS) matrix-assisted laser desorption ionization (MALDI) imaging to immobilized Spirulina filaments to investigate the localization of lipids across distinct physiological regions. We optimized matrix selection and deposition methods with the goal of facilitating high spatial, and intra-filament, resolution using untargeted multivariate statistical spectral deconvolution across MS pixels. Our results demonstrate an improved two step application with an optimized procedure for intra-organismal lipid profiling to improve analyte sensitivity and achieve higher spatial resolution, whereby we evaluate three conventional matrices 2,5-dihydroxybenzoic acid (DHB), a 9:1 ratio of DHB:superDHB (sDHB), 1,5- diaminonaphthalene (DAN) and a 50:50 mix of DHB:sDHB and compare delineation and pixel-based elucidation of intra-filament lipidomics. We identified a total of 1,626 features that could be putatively assigned a lipid-like formula based on database query and 46 unique features, with associated lipid assignments that were significantly distinct in their intra-filament location. MALDI- imaging MS with untargeted statistical spectral deconvolution was used to visualize intra-filament lipidomics organization in Spirulina filaments. Improvements in matrix deposition, including sequential sublimation and pneumatic spraying, increased signal abundance at high spatial resolution and allowed for identification of distinct lipid composition regions. Here in this work outlines a methodology that may be used for micro-ecological untargeted molecular phenotyping.

09 BIOMASS FUELS↗

Application of Multivariate Curve Resolution–Alternate Least Square Technique on Extracting Pure Spectral Components from Multiple Emitting Systems: a Case Study

Multiple emitting components in a fluorophoric system often produce complicated emission spectra. Extracting the individual spectral information from the composite spectra is important in order to comprehend the photophysical processes occurring in the multifluorophoric systems. Although the combination of Principal Component Analysis and Multivariate Curve Resolution-Alternate Least Square (PCA/MCR-ALS) technique is a well-known approach for curve deconvolution, its applicability in the spectral deconvolution of vibronically and electronically mixed up emitting systems as well as systems merged up with multiple electronic bands without a priori knowledge of the individual emitting species, is not properly studied. The present work highlights the strength of PCA/MCR-ALS in retrieving pure spectral information from the set of complex spectra arising out of the regular variation of causative factors that result in the variation of spectral composition. The retrieval of the emission bands utilizing the PCA/MCR-ALS technique has been made without having a priori information of the emitting species present in the multifluorophoric systems and the resolved spectra correspond well with the fluorescence spectra of the individual chemical species. The common curve fitting methods such as Gaussian and Lorentzian techniques have been found to be unsuccessful in providing meaningful photophysical information through the retrieved spectra. A comparative study of the curve fitting techniques MCR-ALS, Gaussian and Lorentzian in a set of complicated emission spectra of (i) pyrene and its excimer, (ii) pyrene and its excimer in presence of benzo[a]pyrene, and (iii) fisetin in bile salt medium is presented herein in details.

74 ATOMIC AND MOLECULAR PHYSICS↗

Laser Source Influence on the Preferential Growth and the Inversion Degree in Pulsed Laser CoFe{sub 2}O{sub 4} Films

A comparative study between cobalt ferrite films deposited by pulsed laser deposition as a function of the laser sources, 355 nm (Nd:YAG) and 248 nm (KrF excimer), on amorphous quartz (AQ) and < 100 > -oriented silicon wafer (SW) at different temperatures (650–800 {sup ∘}C) is presented. Also, a quantitative estimation of the preferential crystalline growth orientation as laser source function was made by means of Lotgering factor and Harris texture coefficient, which were obtained from XRD patterns. The inversion degree in spinel-type structure for cobalt ferrite films was calculated through a deconvolution in Raman spectra, where the band A{sub 1g} vibrating modes in tetrahedral sites were associated with Fe and Co sites (687 and 611 cm{sup −1}, respectively). Additionally, saturation magnetization was also calculated from the inversion degree obtained from deconvolution of the Raman spectra in CoFe{sub 2}O{sub 4} films, being compared with experimental results, which is in a good agreement with cobalt ferrite bulk, and we also correlated the preferential growth and the particle size with increment of the coercive field.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

1 H NMR metabolomics study of metastatic melanoma in C57BL/6J mouse spleen

Melanoma is a malignant tumor of melanocytes. Although extensive investigations have been done to study metabolic changes in primary melanoma in vivo and in vitro, little effort has been devoted to metabolic profiling of metastatic tumors in organs other than lymph nodes. As such, in this work, NMR-based metabolomics combined with multivariate data analysis is used to study metastatic B16-F10 melanoma in C57BL/6J mouse spleen. Principal Component Analysis (PCA), an unsupervised multivariate data analysis method, is used to detect possible outliers, while Orthogonal Projection to Latent Structure (OPLS), a supervised multivariate data analysis method, is employed to find important metabolites responsible for discriminating the control and the melanoma groups. Two different strategies, i.e., spectral binning and spectral deconvolution, are used to reduce the original spectral data before statistical analysis. Spectral deconvolution is found to be superior for identifying a set of discriminatory metabolites between the control and the melanoma groups, especially when the sample size is small. OPLS results show that the melanoma group can be well separated from its control group. It is found that taurine, glutamate, aspartate, O-Phosphoethanolamine, niacinamide ,ATP, lipids and glycerol derivatives are decreased statistically and significantly while alanine, malate, xanthine, histamine, dCTP, GTP, thymidine, 2'-Deoxyguanosine are statistically and significantly elevated. Furthermore, these significantly changed metabolites are associated with multiple biological pathways and may be potential biomarkers for metastatic melanoma in spleen.

1H NMR metabolomics↗

Degradation of electrical resistivity of tungsten following shielded neutron irradiation

A major challenge for heat transfer in nuclear materials is to ensure thermal mobility after high amounts of neutron irradiation. Tungsten is widely selected as a heat transfer material in fusion reactors. In metals, thermal conductivity is dominated by electrons’ ability to transfer energy. Neutron irradiation generates point defects, clusters, and solid transmutation (e.g.rhenium and osmium in tungsten), which inhibit electron motion. The purpose of this work is to quantify the irradiation-induced change in electron mobility and deconvolute transmutation and microstructural effects on observed changes to electron mobility. Single and polycrystalline tungsten were fast neutron irradiated in the High Flux Isotope Reactor at Oak Ridge National Laboratory to doses between 0.2 and 0.7 displacements per atom (dpa) and temperatures from 500 °C to 1000 °C. Grain growth was observed in all samples. Microstructure and transmutation were quantified. The geometric orientation of samples with elongated grains has been shown to affect electrical resistivity. A mathematical model was developed and used to deconvolute solid-solution transmutation, grain, and temperature-dependent lattice effects on resistivity. At ~0.4 dpa at ~590 °C, the combined resistivity degradation due to voids, vacancies, interstitials, and dislocations is estimated to be greater than the contribution from solid solution Re transmutation, which is greater than the contribution from grain boundaries. At doses of ~0.7 dpa at ~750 °C, solid solution Re contributions are greater than all other effects combined. As a result, this work establishes a basis to predict the effects of irradiation temperature and transmutation on thermal properties of tungsten and highlights the importance of irradiation temperature.

36 MATERIALS SCIENCE↗

Effective properties of a fly ash geopolymer: Synergistic application of X-ray synchrotron tomography, nanoindentation, and homogenization models

Microstructural and micromechanical investigation of a fly ash-based geopolymer using: (i) synchrotron X-ray tomography (XRT) to determine the volume fraction and tortuosity of pores that are influential in fluid transport, (ii) mercury intrusion porosimetry (MIP) to capture the volume fraction of smaller pores, (iii) scanning electron microscopy (SEM) combined with multi-label thresholding to identify and characterize the solid phases in the microstructure, and (iv) nanoindentation to determine the component phase elastic properties using statistical deconvolution, is reported in this paper. The phase volume fractions and elastic properties are used in multi-step mean field homogenization (Mori–Tanaka and double inclusion) models to determine the homogenized macroscale elastic modulus of the composite. The homogenized elastic moduli are in good agreement with the flexural elastic modulus determined on macroscale paste beams. The combined use of microstructural and micromechanical characterization tools at multiple scales provides valuable information towards the material design of fly ash geopolymers.

36 MATERIALS SCIENCE↗

Effects of micrometer-scale surface roughness on thermal infrared emittance spectra of silica glass

Surface roughness is known to decrease thermal infrared (TIR) absorption band intensity, but studies of the effect on geologically relevant samples are relatively limited. To determine the effect of surface roughness (with features smaller than ~2/3 of the wavelength) on TIR spectra, we investigated two glass compositions with prepared roughened surfaces: (1) high purity fused silica and (2) soda-lime glass (73 wt% SiO$_2$). We roughened the surfaces of the glasses by sandblasting and polishing with grit paper. The surfaces were characterized with scanning electron microscopy and stylus profilometry. We then analyzed the roughened glasses with TIR emittance spectroscopy. Micrometer-scale roughness causes a decrease in TIR absorption band intensity, relative to a specular surface. No significant changes in band shape or shifts in wavelength were detected. As roughness increases, empirical results show a logarithmic decrease in TIR absorption band intensity. The logarithmic trends of the two glass compositions are different; empirical roughness calibrations do not translate across different compositions. A linear, least-squares spectral deconvolution using two endmembers, specular and blackbody, predicts model spectra of roughened glass surfaces with relatively low error. This is of consequence to orbital TIR measurements of poorly constrained targets, such as the martian surface, because micrometer-scale roughness is adequately modeled by the addition of a blackbody spectrum to the deconvolution endmember matrix.

36 MATERIALS SCIENCE↗

Structural investigation in the TiB{sub 2}-(Na{sub 2}O.B{sub 2}O{sub 3}.Al{sub 2}O{sub 3}) system

Composites in the TiB{sub 2}-Na{sub 2}O.B{sub 2}O{sub 3}.Al{sub 2}O{sub 3} systems, TiB{sub 2}-MBA (MB stands for sodium metaborate and A is Al{sub 2}O{sub 3}), were prepared by self-propagating high-temperature synthesis (SHS), in simultaneous mode. Selection of these compositions was ruled by the interesting properties of both TiB{sub 2} and double borates of alkali metal and aluminum. The structure of the obtained materials was evaluated by micro-Raman spectroscopy, from room temperature up to 600 {sup o}C, and X-ray photoelectron spectroscopy (XPS). Formation of the TiB{sub 2} and TiO{sub 2-x}B{sub x} phases along with TiO{sub 2} as rutile were identified as titanium speciation in the grain phase embedded in a sodium aluminum borate matrix. Integration of the Raman spectra of the grain phases revealed a TiB{sub 2} content of 16.99% and 23.32% for the two composite investigated 2TiB{sub 2}.2MBA and 3TiB{sub 2}.5MBA. A constrained-width model for the spectral deconvolution of the high-frequency Raman band was forwarded to calculate the proportion of tetrahedral boron atoms (7.424%) in the blank borate matrix Na{sub 2}B{sub 2}O{sub 4}.Al{sub 2}O{sub 3} in solid phase. - Graphical abstract: Deconvolution of the reduced Raman spectrum of the grain phase in TiB{sub 2}-(Na{sub 2}O.B{sub 2}O{sub 3}.Al{sub 2}O{sub 3}) composite along with its Raman micrographs collected at room temperature.

36 MATERIALS SCIENCE↗

TL/OSL properties of beta irradiated Al2O3:Tm3+ phosphor synthesized by microwave combustion method

Highlights: • TL emission spectra of γ – rayed Al{sub 2}O{sub 3}:Tm{sup 3+} shows Tm{sup 3+} characteristic transitions. • Doping of Tm{sup 3+} ions causes enhancement of TL/OSL. • TL/OSL kinetic parameters are analyzed by CGCD method. • TL mechanism of γ/β – rayed Al{sub 2}O{sub 3}:Tm{sup 3+} was proposed. • TL/OSL dosimetric properties of Al{sub 2}O{sub 3}:Tm{sup 3+} suggests that the material is appropriate for medical dosimetry. - Abstract: This work discusses synthesis of stable α-phase of Al{sub 2}O{sub 3}:Tm{sup 3+} by combustion method using temperature controlled microwave oven. The crystalline phase was analyzed by X-ray diffraction (XRD) technique and average crystallite size was found to be 147 nm. Observations using scanning electron microscope (SEM) image suggest formation of agglomerated particles and energy dispersive x-ray spectroscopy (EDS) confirmed the incorporation of Tm{sup 3+} in Al{sub 2}O{sub 3}. Thermoluminescence emission (TLE) spectrum of γ – irradiated Al{sub 2}O{sub 3}:Tm{sup 3+} shows characteristic emissions of Tm{sup 3+}, Cr{sup 3+} and Mn{sup 4+}. TL glow curves of γ – irradiated Al{sub 2}O{sub 3}:Tm{sup 3+} exhibit a prominent peak at 453 K along with a shoulder at 496 K. The glow curves of β – irradiated Al{sub 2}O{sub 3}:Tm{sup 3+} were studied in different emission regions using U340 + BG39 (UV band pass), CS759 + BG39 (Blue band pass) and BG39 (Visible band pass) optical glass filters. A prominent peak was observed at 471 K in for all mentioned emission regions and an additional shoulder was observed at 511 K with CS759 + BG39 and BG39 filters. TL glow curve of β – irradiated Al{sub 2}O{sub 3}:Tm{sup 3+} using only BG39 filter had more counts than CS759 + BG39 and U340 + BG39 filters. Further, the effect of Tm{sup 3+} impurity on TL response was studied. TL kinetic parameters were estimated by using computerized glow curve deconvolution (CGCD) technique. The activation energy and frequency factor of prominent peak (471 K) were found to be 1.31 eV and 3.50 × 10{sup 13} s{sup −1} respectively. Optically stimulated luminescence (OSL) characteristics of β – irradiated Al{sub 2}O{sub 3}:Tm{sup 3+} were studied using U340 + BG39 and CS759 + BG39 filters. Highest OSL intensity was observed in UV. OSL curves were deconvoluted by general order decay equation. Life time and photoionization cross section of the traps responsible for OSL were found to be 5.30 s and 3.98 × 10{sup −18} cm{sup 2} respectively. The process of ionization of electron from Tm{sup 3+}, electron trap in host lattice and its recombination mechanism is proposed. Phosphorescence decay of beta irradiated sample was also studied. The lifetime of phosphorescence decay was found to be 140 s for the prominent peak and TL intensity decays 25% after the phosphorescence. TL/OSL dosimetric properties viz. linearity with dose, reusability and minimum detectable dose of the phosphor were characterized for medical dosimetry application.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Need for Precise and Well-documented Experimental Data on Prompt Fission Neutron Spectra from Neutron-induced Fission of {sup 239}Pu

The spectrum of neutrons emitted promptly after {sup 239}Pu(n,f)—a so-called prompt fission neutron spectrum (PFNS)—is a quantity of high interest, for instance, for reactor physics and global security. However, there are only few experimental data sets available that are suitable for evaluations. In addition, some of those data sets differ by more than their 1-σ uncertainty boundaries. We present the results of MCNP studies indicating that these differences are partly caused by underestimated multiple scattering contributions, over-corrected background, and inconsistent deconvolution methods. A detailed uncertainty quantification for suitable experimental data was undertaken including these effects, and test-evaluations were performed with the improved uncertainty information. The test-evaluations illustrate that the inadequately estimated effects and detailed uncertainty quantification have an impact on the evaluated PFNS and associated uncertainties as well as the neutron multiplicity of selected critical assemblies. A summary of data and documentation needs to improve the quality of the experimental database is provided based on the results of simulations and test-evaluations. Given the possibly substantial distortion of the PFNS by multiple scattering and background effects, special care should be taken to reduce these effects in future measurements, e.g., by measuring the {sup 239}Pu PFNS as a ratio to either the {sup 235}U or {sup 252}Cf PFNS.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Kinetics of scrap tyre pyrolysis under vacuum conditions

Scrap tyre pyrolysis under vacuum is attractive because it allows easier product condensation and control of composition (gas, liquid and solid). With the aim of determining the effect of vacuum on the pyrolysis kinetics, a study has been carried out in thermobalance. Two data analysis methods have been used in the kinetic study: (i) the treatment of experimental data of weight loss and (ii) the deconvolution of DTG (differential thermogravimetry) curve. The former allows for distinguishing the pyrolysis of the three main components (volatile components, natural rubber and styrene-butadiene rubber) according to three successive steps. The latter method identifies the kinetics for the pyrolysis of individual components by means of DTG curve deconvolution. The effect of vacuum in the process is significant. The values of activation energy for the pyrolysis of individual components of easier devolatilization (volatiles and NR) are lower for pyrolysis under vacuum with a reduction of 12 K in the reaction starting temperature. The kinetic constant at 503 K for devolatilization of volatile additives at 0.25 atm is 1.7 times higher than that at 1 atm, and that corresponding to styrene-butadiene rubber at 723 K is 2.8 times higher. Vacuum enhances the volatilization and internal diffusion of products in the pyrolysis process, which contributes to attenuating the secondary reactions of the repolymerization and carbonization of these products on the surface of the char (carbon black). The higher quality of carbon black is interesting for process viability. The large-scale implementation of this process in continuous mode requires a comparison to be made between the economic advantages of using a vacuum and the energy costs, which will be lower when the technologies used for pyrolysis require a lower ratio between reactor volume and scrap tyre flow rate.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Three-dimensional scanning transmission electron microscopy of biological specimens

A three-dimensional (3D) reconstruction of the cytoskeleton and a clathrin-coated pit in mammalian cells has been achieved from a focal-series of images recorded in an aberration-corrected scanning transmission electron microscope (STEM). The specimen was a metallic replica of the biological structure comprising Pt nanoparticles 2 - 3 nm in diameter, with a high stability under electron beam radiation. The 3D dataset was processed by an automated deconvolution procedure. The lateral resolution was 1.1 nm, set by pixel size. Particles differing by only 10 nm in vertical position were identified as separate objects with greater than 20% dip in contrast between them. We refer to this value as the axial resolution of the deconvolution or reconstruction, the ability to recognize two objects, which were unresolved in the original data set. The precision of the height determination was 0.2 nm. The resolution of the reconstruction is comparable to that achieved by tilt-series transmission electron microscopy (TEM). However, the focal-series method does not require mechanical tilting and is therefore much faster. 3D STEM images were also recorded of the Golgi ribbon in conventional thin sections containing 3T3 cells with a comparable axial resolution in the deconvolved data set.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Accurate, Sensitive, and Precise Multiplexed Proteomics Using the Complement Reporter Ion Cluster

We present that quantitative analysis of proteomes across multiple time points, organelles, and perturbations is essential for understanding both fundamental biology and disease states. The development of isobaric tags (e.g. TMT) have enabled the simultaneous measurement of peptide abundances across several different conditions. These multiplexed approaches are promising in principle because of advantages in throughput and measurement quality. However, in practice existing multiplexing approaches suffer from key limitations. In its simple implementation (TMT-MS2), measurements are distorted by chemical noise leading to poor measurement accuracy. The current state-of-the-art (TMT-MS3) addresses this, but requires specialized quadrupole-iontrap-Orbitrap instrumentation. The complement reporter ion approach (TMTc) produces high accuracy measurements and is compatible with many more instruments, like quadrupole-Orbitraps. However, the required deconvolution of the TMTc cluster leads to poor measurement precision. Here, we introduce TMTc+, which adds the modeling of the MS2-isolation step into the deconvolution algorithm. The resulting measurements are comparable in precision to TMT-MS3/MS2. The improved duty cycle, and lower filtering requirements make TMTc+ more sensitive than TMT-MS3 and comparable with TMT-MS2. At the same time, unlike TMT-MS2, TMTc+ is exquisitely able to distinguish signal from chemical noise even outperforming TMT-MS3. Lastly, we compare TMTc+ to quantitative label-free proteomics of total HeLa lysate and find that TMTc+ quantifies 7.8k versus 3.9k proteins in a 5-plex sample. At the same time the median coefficient of variation improves from 13% to 4%. Furthermore, TMTc+ advances quantitative proteomics by enabling accurate, sensitive, and precise multiplexed experiments on more commonly used instruments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evolution of Functional Groups during Pyrolysis Oil Upgrading

In this paper, we examine the evolution of functional groups (carbonyl, carboxyl, phenol, and hydroxyl) during stabilization at 100–200 °C of two typical wood derived pyrolysis oils from BTG and Amaron in a batch reactor over Ru/C catalyst for 4h. An aqueous and an oily phase were obtained. The content of functional groups in both phases were analyzed by GC/MS, 31P-NMR, 1H-NMR, elemental analysis, KF titration, carbonyl groups by Faix, Folin – Ciocalteu method and UV-Fluorescence. The consumption of hydrogen was between 0.007 and 0.016 g/g oil, and 0.001-0.020 g of CH4/g of oil, 0.005-0.016 g of CO2/g oil and 0.03-0.10 g H2O/g oil were formed. The content of carbonyl, hydroxyl, and carboxyl groups in the volatile GC-MS detectable fraction decreased (80, 65, and ~70% respectively), while their behavior in the total oil and hence in the non-volatile fraction was more complex. The carbonyl groups initially decreased having minimum at ~125-150°C and then increased, while the hydroxyl groups had reversed trend. This might be explained by initial hydrogenation of the carbonyl groups to form hydroxyls, followed by continued dehydration reactions at higher temperatures that may increase their content. The 31P-NMR was on the limit of its sensitivity for the carboxylic groups to precisely detect changes in the non-volatile fraction, however the more precise titration method showed that the concentration of carboxylic groups in the non-volatile fraction remains constant with increased stabilization temperature. The UV-Fluorescence results show that repolymerization increases with temperature. ATR-FTIR method coupled with deconvolution of the region between 1490 and 1850 cm-1 showed to be a good tool for following the changes in carbonyl groups and phenols of the stabilized pyrolysis oils. The deconvolution of the IR bands around 1050 and 1260 cm-1 correlated very well with the changes in the 31P-NMR silent O groups (likely ethers). Most of the H2O formation could be explained from the significant reduction of these silent O groups (from 12% in the fresh oils, to 6 to 2% in the stabilized oils) most probably belonging to ethers.

Stankovikj, Filip↗

Internally Referenced DOSY-NMR: A Novel Analytical Method in Revealing the Solution Structure of Lithium-Ion Battery Electrolytes

Here, a novel methodology is reported on the use of internally referenced diffusion-ordered spectroscopy (IR-DOSY) in divulging the solution structure of lithium-ion battery electrolytes. Toluene was utilized as the internal reference for 1 H-DOSY analysis due to its exceptionally low donor number and reasonable solubility in various electrolytes. With the introduction of the internal reference, the solvent coordination ratio of different species in the electrolytes can be easily determined by 1 H-DOSY or 7 Li-DOSY. This new technique was applied to different carbonate electrolytes, and the results were consistent with a Fourier transform infrared (FTIR) analysis. Compared to conventional vibrational spectroscopy, this IR-DOSY technique avoids the complicated deconvolution of the spectrum and allows determination of the solvent coordination ratio of different species in electrolyte systems with two or more organic solvents.

25 ENERGY STORAGE↗

High-Field One-Dimensional and Two-Dimensional 27Al Magic-Angle Spinning Nuclear Magnetic Resonance Study of ?-, d-, and ?-Al2O3 Dominated Aluminum Oxides: Toward Understanding the Al Sites in ?-Al2O3

Herein, a detailed analysis was carried out using high-field (19.9 T) 27Al magic-angle spinning (MAS) nuclear magnetic resonance (NMR) on three specially prepared aluminum oxide samples where the ?-, d-, and ?-Al2O3 phases are dominantly expressed through careful control of the synthesis conditions. Specifically, two-dimensional (2D) multiquantum (MQ) MAS 27Al was used to obtain high spectral resolution, which provided a guide for analyzing quantitative 1D 27Al NMR spectra. Six aluminum sites were resolved in the 2D MQ MAS NMR spectra, and seven aluminum sites were required to fit the 1D spectra. A set of octahedral and tetrahedral peaks with well-defined quadrupolar line shapes was observed in the ?-phase dominant sample and was unambiguously assigned to the ?-Al2O3 phase. The distinct line shapes related to the ?-Al2O3 phase provided an opportunity for effectively deconvoluting the more complex spectrum obtained from the d-Al2O3 dominant sample, allowing the peaks/quadrupolar parameters related to the d-Al2O3 phase to be extracted. The results show that the d-Al2O3 phase contains three distinct AlO sites and three distinct AlT sites. This detailed Al site structural information offers a powerful way of analyzing the most complex ?-Al2O3 spectrum. It is found that the ?-Al2O3 phase consists of Al sites with local structures similar to those found in the d-Al2O3 and ?-Al2O3 phases albeit with less ordering. Spin–lattice relaxation time measurement further confirms the disordering of the lattice. Collectively, this study uniquely assigns 27Al features in transition aluminas, offering a simplified method to quantify complex mixtures of aluminum sites in transition alumina samples.

Xu, Suochang↗