Search NASA⌕ Search

SEARCH · Search NASA

Results for “density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Noncompressive density enhancements in the solar wind

When the bulk flow speed is nearly constant or falling, high densities are sometimes observed in the solar wind. These densities do not appear to be generated in interplanetary space. It is noted that the magnetic field is not enhanced within these events, and that the proton and/or electron temperatures are low, varying in opposition to the density. About 1/3 of these density events contains interplanetary magnetic field reversals, some of which are noisy and do not qualify as sector boundaries. It is estimated that the average event contains approximately 10 to the 16th g of material and 2.6 x 10 to the 31st ergs, so that aggregated events, when they are common, make a negligible contribution to the total mass and energy budget of the solar wind at 1 AU. It is suggested that there may be an association between density enhancements and solar coronal mass ejection events.

Gosling, J. T.↗
NASA NTRS1978

A method of determining spectral analytical dye densities

A straightforward method for the user of color imagery to determine the spectral analytical density of dyes present in the processed imagery is presented. The method involves exposing a large number of different color patches on the film which span the gamut of the film's imaging capabilities. From integral spectral density measurements at 16 to 19 different wavelengths, the unit spectral dye curves for each of the three dyes present were determined in two different types of color films. A discussion of the use of these spectral dye densities to determine the transformation between integral density measurements and analytical density is presented.

Scarpace, F. L.↗
NASA NTRS1979

Venus - Density of upper atmosphere from measurements of drag on Pioneer orbiter

Measurements of the changes in orbital period of the Pioneer Venus orbiter are used to estimate the density of the upper atmosphere of Venus at altitudes in the range from 150 to 200 km. At 150 km, the dayside mean density is 1.4 times 10 to the -13th g/cc and the nightside mean density is 4 times 10 to the -14th g/cc. The oscillatory patterns of density variation are described. The data for densities between 150 and 200 km on the dayside are sketchy but the data imply a scale height between 15 and 20 km.

Shapiro, I. I.↗
NASA NTRS1979

Density models for the upper atmosphere

Three contemporary atmospheric density models which are candidates for meeting the current orbit computation requirements are compared. The models considered are the analytic Jacchia-Roberts model, the modified Harris-Priester model, and the USSR Cosmos satellite derived density model. All of these models can be said to be quasi-dynamic representations of the atmospheric density. The time dependent variations in the model density profiles are determined by both the evaluation of explicit continuous functions of time and by the input of time varying parameters to algorithms. The computation characteristics of each of the models are compared and a modification to the modified Harris-Priester model is proposed which improves its ability to represent the diurnal variation in the atmospheric density.

Dowd, D. L.↗
NASA NTRS1981

Results of a new approach to determining the density function in the galactic plane - The local system

Star counts in the directions of 15 opaque CO clouds of known distance are used to determine the density function in the galactic plane of the local system of apparently enhanced stellar density. Counts were made on Palomar Sky Survey blue prints in the directions of the highest opacity portions of 15 molecular clouds. Average values of the density functions obtained are found to be significantly less than unity for clouds more distant than 800 pc regardless of galactic longitude, confirming the presence of the local mass density enhancement. Data suggest that the local system represents a density enhancement of a factor of 2 over a region of approximately 500 pc. An empirical relationship is also determined between the distance to a molecular cloud and the number of foreground stars projected on it, which may be useful in determining distances to clouds nearer than 3 kpc. The potential of the Space Telescope for complete stellar mass determinations out to a distance of 1 kpc is pointed out.

Herbst, W.↗
NASA NTRS1982

Long-term variations in atomic nitrogen densities

Thermospheric densities of atomic and molecular nitrogen measured from February 1976 through December 1978 by the open source neutral mass spectrometer on the equatorial Atmosphere Explorer E satellite are considered. During this period a significant increase in N densities was observed at the above altitudes of 250 km. It is thought that the increases can be explained by increased production of N from enhanced solar extreme ultraviolet radiation but not by a simple rise in thermospheric temperature. Empirical modeling of N densities at 250 and 375 km by using stepwise regression techniques suggests that the increased solar EUV fluxes in the 800-1000 A range are sufficient to account for the observed rise in N densities at 250 km from June 1976 to June 1977 and are the dominant factor in the density increase of a factor of 5 observed at an altitude of 375 km from June 1976 to late 1978.

Engebretson, M. J.↗
NASA NTRS1980

Time-dependent lunar density models

Simple models of the geochemical and geophysical evolution of the moon were constructed with the particular aim of investigating the mass density distribution within the moon as a function of time. The strongly inverted (densest material on top) density distribution resulting from fractional crystallization of the lunar magma ocean was found to rearrange itself into a highly stable stratification. Density stratification due to compositional variation dominated gravitational stability; thus, thermally driven convection was found to be suppressed in regions with relaxed (rearranged so as to minimize the gravitational potential energy) compositional density variation. The suppression of convection as a heat transfer process results in considerable modification of thermal evolution. The models produced sufficient density segregation from magma oceans of a few hundred km thickness, such that relaxation to the most stable rearrangement yielded a polar moment of inertia approximating that measured for the present-day moon. Thus, lunar models matching moment-of-inertia constraints but lacking a metallic core are motivated.

Herbert, F.↗
NASA NTRS1982

Density constraints on the composition of Venus

It is pointed out that the composition of Venus is constrained most directly by the mean density of the planet because the moment of inertia factor is unknown and seismic data do not yet exist for the interior. Values of mass and mean radius give 5.245 g/cu cm for the mean density of Venus. This value is nearly 5% less than the value for the mean density of earth. Explanations for the density difference between Venus and earth are discussed, taking into consideration five models which have been advocated to account for the difference. On the basis of calculations, it is concluded that none of the models can be excluded solely on the basis of the observed density difference between Venus and earth. Therefore, evaluation of the models for Venus must be based principally on the plausibility or implausibility of their constituent assumptions and on the success of the models in predicting the compositions of other planets for which more data exist.

Goettel, K. A.↗
NASA NTRS1982

Chronic acceleration and brain density

Tests carried out on rabbits show that the effect of chronic acceleration is not uniform among the various tissues studied. Although body mass is reduced by the treatment, as expected, no change is apparent in brain mass or in the density of cerebrospinal fluid. Acceleration-induced changes are encountered in tissue density, the myocardium exhibiting a transient increase followed by an exponential decrease toward a limit and the brain showing an arithmetic increase in density with continued exposure to 2.5 G. The data are seen as suggesting that a specific brain load is not a regulated phenomenon and that no physiological processes occur to attenuate the increased load imposed by the hyperdynamic environment. An equation is derived indicating that the stimulus potential per unit of brain load increases with body size, even though brain density decreases and cerebrospinal fluid density increases.

Hoffman, L. F.↗
NASA NTRS1982

Effects of heating rate on density, microstructure, and strength of Si3N4-6 wt.% Y2O3 and a beta-prime sialon

The effects of the heating rate during sintering/firing on the final density, microstructure, and strength of Si3N4-6 wt% Y2O3 and beta-prime sialon, sintered for four hours at 1750 C, are examined. In Si3N4-6 wt% Y2O3 increasing the heating rate from 7 C/min to 25 C/min to 90 C/min results in a corresponding decrease in the final density from 3.01 g/cu cm to 2.92 g/cu cm to 2.76 g/cu cm. In the beta-prime sialon composition all three heating rates produce an equivalent final density of 3.13 g/cu cm. All heating rates in both compositions produce nonhomogeneous microstructures. The room-temperature strength of Si3N4-6 wt% Y2O3 increases from 372 to 510 MPa with increased density, while the corresponding strengths for the betaprime sialon at equivalent densities are 345 to 445 MPa.

Campbell, S. S.↗
NASA NTRS1982

Mixture densities, maximum likelihood, and the EM algorithm

The problem of estimating the parameters which determine a mixture density is reviewed as well as maximum likelihood estimation for it. A particular iterative procedure for numerically approximating maximum likelihood estimates for mixture density problems is considered. This EM algorithm, is a specialization to the mixture density context of a general algorithm of the same name used to approximate maximum likelihood estimates for incomplete data problems. The formulation and theoretical and practical properties of the EM algorithm for mixture densities are discussed focussing in particular on mixtures of densities from exponential families.

Redner, R. A.↗
NASA NTRS1983

Quantitative measurement of density and velocity in compressible flows using laser-induced iodine fluorescence

A nonintrusive optical technique for the quantitative measurement of molecular density and velocity at a point or in an entire cross-sectional plane of a compressible flowfield is reported. Iodine molecules, seeded into the flowfield reservoir, are excited by a tunable narrow-bandwidth laser and the resulting spatially-resolved fluorescence is collected by a single- or multiple-element detector. A theoretical model for the iodine laser-induced fluorescence process is essential for quantitative measurements and is developed using a rate-equation approach. Density measurements using laser-induced fluorescence are normally complicated by collisional quenching; however, the theory predicts that the off-resonant fluorescent signal is directly proportional to density. Velocity is directly related to the Doppler shift of the iodine absorption line, determined by monitoring the broadband fluorescent signal as the laser is tuned in frequency. Experiments in a steady supersonic flowfield are compared with numerical calculations to demonstrate the accuracy of the approach for density and velocity measurement and the lack of perturbation to the flowfield by the iodine seeding. Extensions of the current approach to density and velocity measurement in lower Mach number flows, to the measurement of pressure and temperature, and to temporally-resolved measurements are discussed.

Mcdaniel, J. C.↗
NASA NTRS1982

Second order closure for variable density free shear layer

A full second order closure turbulence model for the prediction of free shear flows with variable density is developed. The importance of density fluctuations due to inhomogeneities in fluid composition is emphasized. Some simplicity is achieved by using density weighted averaging to account implicitly for density fluctuation effects. Transport equations for various second order correlations - such as Reynolds stress, turbulent mass fluxes or density velocity correlations - are derived, modelled and solved, together with the mean equations for momentum and species conservation. Solutions of these equations are compared with the two different sets of experimental data for low speed free mixing layers (helium into nitrogen and freon 12 into air).

Vandromme, D.↗
NASA NTRS1982

Finding the lost river gas field - Lineament density analysis in hydrocarbon exploration

A comparative trial analysis of lineament density in 1:500,000 Landsat and 1:48,000 aerial Landsat-simulator images of a gas-field region in West Virginia is presented. The high-contrast, band 4, 5, 7 color composite Landsat image was interpreted independently by two analysts. The slightly different lineament maps were evaluated in terms of lineament-density variation in 10 x 10-km areas, and the resulting areal-variation maps are found to be statistically equivalent. High lineament density is shown to be associated with productive gas wells. Comparison of ground-based substructural contour maps and lineament-density analyses of the Landsat-simulator images reveals good correlation between density maxima or isopleths and substructural features associated with hydrocarbon formations. A hydrocarbon-exploration strategy using both Landsat and aerial images is proposed.

Lang, H. R.↗
NASA NTRS1983

Electron density and energetic particle precipitation observed during the eclipse of 26 February 1979

Electron density profiles and energetic particle fluxes are obtained based on data collected by two rockets launched from Red Lake, Ontario, respectively, at the beginning and end of totality during the solar eclipse of February 26, 1979. Data obtained by a rocket launched on February 24, 1979 showed that the electron density was normal (at 10,000 cu cm) above 110 km, to rocket apogee (130.5 km). Below 110 km, the electron density was found to be enhanced compared with data from Wallops Island at the same solar zenith angle (63 deg). It is proposed that this enhancement was due to the large flux of field-aligned energetic particles observed on the same rocket. The electron density above 110 km to rocket apogee (132.6 and 132. 3 km) was found to be reduced during totality by a factor of about three. However, below 110 km, the electron density was found to be much greater than observed during previous eclipses, probably due to the additional ionization resulting from energetic particles. The particle flux measured on February 26 was found to be an order of magnitude less than on February 24 but showed greater variability, particularly at the higher energies (100 keV).

Smith, L. G.↗
NASA NTRS1983

Saturn's ionosphere: Inferred electron densities

During the two Voyager encounters with Saturn, radio bursts were detected which appear to have originated from atmospheric lightning storms. Although these bursts generally extended over frequencies from as low as 100 kHz to the upper detection limit of the instrument, 40 MHz, they often exhibited a sharp but variable low frequency cutoff below which bursts were not detected. We interpret the variable low-frequency extent of these bursts to be due to the reflection of the radio waves as they propagate through an ionosphere which varies with local time. We obtain estimates of electron densities at a variety of latitude and local time locations. These compare well with the dawn and dusk densitis measured by the Pioneer 11 Voyager Radio Science investigations, and with model predictions for dayside densities. However, we infer a two-order-of-magnitude diurnal variation of electron density, which had not been anticipated by theoretical models of Saturn's ionosphere, and an equally dramatic extinction of ionospheric electron density by Saturn's rings.

Kaiser, M. L.↗
NASA NTRS1984

Saturn's ionosphere - Inferred electron densities

During the two Voyager encounters with Saturn, radio bursts were detected which appear to have originated from atmospheric lightning storms. Although these bursts generally extended over frequencies from as low as 100 kHz to the upper detection limit of the instrument, 40 MHz, they often exhibited a sharp but variable low frequency cutoff below which bursts were not detected. We interpret the variable low-frequency extent of these bursts to be due to the reflection of the radio waves as they propagate through an ionosphere which varies with local time. We obtain estimates of electron densities at a variety of latitude and local time locations. These compare well with the dawn and dusk densities measured by the Pioneer 11 Voyager Radio Science investigations, and with model predictions for dayside densities. However, we infer a two-order-of-magnitude diurnal variation of electron density, which had not been anticipated by theoretical models of Saturn's ionosphere, and an equally dramatic extinction of ionospheric electron density by Saturn's rings. Previously announced in STAR as N84-17102

Kaiser, M. L.↗
NASA NTRS1984

Correlations between thermospheric density and temperature, solar EUV flux, and 10.7-cm flux variations

Simultaneously measured thermospheric N2 densities and solar EUV fluxes obtained by the AE-E satellite are compared with ground-based solar 10.7-cm fluxes and calcium plage measurements. Short-wavelength (coronal) EUV emissions correlate better with thermospheric density than the 10.7-cm flux, although the reduction in density residuals is small. Correlation of density with a calcium plage index was somewhat worse than with 10.7. Although the overall correlation of 10.7-cm flux with EUV fluxes is high, the best fit slopes are different for short- and long-term variations, and there are instances where the short-term behavior of various EUV emissions and that of the 10.7-cm flux are distinctly different. For both density and EUV, a two-factor formula based on daily 10.7-cm flux and a running mean of the 10.7-cm flux provides a better fit than using the daily 10.7-cm flux alone.

Hedin, A. E.↗