Search NASA⌕ Search

SEARCH · Search NASA

Results for “deposition modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Thermally Driven Interfacial Degradation between Li 7 La 3 Zr 2 O 12 Electrolyte and LiNi 0.6 Mn 0.2 Co 0.2 O 2 Cathode

Solid-state batteries offer higher energy density and enhanced safety compared to the present lithium-ion batteries using liquid electrolytes. A challenge to implement them is the high resistances, especially at the solid electrolyte interface with the cathode. Sintering at elevated temperature is needed in order to get good contact between the ceramic solid electrolyte and oxide cathodes and thus to reduce contact resistances. Many solid electrolyte and cathode materials react to form secondary phases. It is necessary to find out which phases arise as a result of interface sintering and evaluate their effect on electrochemical properties. Herein, we assessed the interfacial reactions between LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622) and Li 7 La 3 Zr 2 O 12 (LLZO) as a function of temperature in air. We prepared model systems by depositing thin-film NMC622 cathode layers on LLZO pellets. The thin-film cathode approach enabled us to use interface-sensitive techniques such as X-ray absorption spectroscopy in the near-edge as well as the extended regimes and identify the onset of detrimental reactions. We found that the Ni and Co chemical environments change already at moderate temperatures, on-setting from 500 °C and becoming especially prominent at 700 °C. By analyzing spectroscopy results along with X-ray diffraction, we identified Li 2 CO 3 , La 2 Zr 2 O 7 , and La(Ni,Co)O 3 as the secondary phases that formed at 700 °C. The interfacial resistance for Li transfer, measured by electrochemical impedance spectroscopy, increases significantly upon the onset and evolution of the detected interface chemistry. Our findings suggest that limiting the bonding temperature and avoiding CO 2 in the sintering environment can help to remedy the interfacial degradation.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Deglaciation of northwestern Greenland during Marine Isotope Stage 11

Past interglacial climates with smaller ice sheets offer analogs for ice sheet response to future warming and contributions to sea level rise; however, well-dated geologic records from formerly ice-free areas are rare. Here we report that subglacial sediment from the Camp Century ice core preserves direct evidence that northwestern Greenland was ice free during the Marine Isotope Stage (MIS) 11 interglacial. Luminescence dating shows that sediment just beneath the ice sheet was deposited by flowing water in an ice-free environment 416 ± 38 thousand years ago. Provenance analyses and cosmogenic nuclide data and calculations suggest the sediment was reworked from local materials and exposed at the surface <16 thousand years before deposition. Ice sheet modeling indicates that ice-free conditions at Camp Century require at least 1.4 meters of sea level equivalent contribution from the Greenland Ice Sheet.

58 GEOSCIENCES↗
DOE OSTI2021

Prospects for macroscopic dark matter detection at space-based and suborbital experiments

Here we compare two different formalisms for modeling the energy deposition of macroscopically sized/massive quark nuggets (also known as macros) in the Earth's atmosphere. We show that for a reference mass of 1 g, there is a discrepancy in the macro luminosity of about 14 orders of magnitude between the predictions of the two formalisms. Armed with our finding we estimate the sensitivity for macro detection at space-based (Mini-EUSO and POEMMA) and suborbital (EUSO-SPB2) experiments.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Unraveling the Effects of Melt–Mantle Interactions on the Gold Fertility of Magmas

The oxidation state of the Earth’s mantle and its partial melting products exert a key control on the behavior and distribution of sulfur and chalcophile and siderophile elements between the mantle and crust, underpinning models of ore deposit formation. Whether the oxidized nature of magmas is inherited from the asthenospheric mantle source or acquired during ascent and differentiation is vigorously debated, limiting our understanding of the mechanisms of extraction of sulfur and metals from the mantle. Here, we focused on the redox-sensitive behavior of sulfur in apatite crystallized from quenched alkaline basaltic melts preserved within a peridotite xenolith from the El Deseado Massif auriferous province in southern Patagonia. We took advantage of this unique setting to elucidate the redox evolution of melts during their ascent through the subcontinental lithospheric mantle (SCLM) and grasp the inner workings of the Earth’s mantle during gold metallogenesis. Our data reveal that an initially reduced silicate melt (ΔFMQ -2.2 to -1.2) was oxidized to ΔFMQ between 0 and 1.2 during percolation and interaction with the surrounding peridotite wall-rock (ΔFMQ 0 to +0.8). This process triggered changes in sulfur speciation and solubility in the silicate melt, boosting the potential of the melt to scavenge ore metals such as gold. We suggest that large redox gradients resulting from the interaction between ascending melts and the surrounding mantle can potentially modify the oxidation state of primitive melts and enhance their metallogenic fertility. Among other factors including an enriched metal source and favorable geodynamic conditions, redox gradients in the mantle may exert a first-order control on the global-scale localization of crustal provinces endowed with gold deposits.

58 GEOSCIENCES↗
DOE OSTI2024

Rare earth element enrichment in coal and coal-adjacent strata of the Uinta Region, Utah and Colorado

This study aims to quantify rare earth element enrichment within coal and coal-adjacent strata in the Uinta Region of central Utah and western Colorado. Rare earth elements are a subset of critical minerals as defined by the U.S. Geological Survey. These elements are used for a wide variety of applications, including renewable energy technology in the transition toward carbon-neutral energy. While rare earth element enrichment has been associated with Appalachian coals, there has been a more limited evaluation of western U.S. coals. Here, samples from six active mines, four idle/historical mines, four mine waste piles, and seven stratigraphically complete cores within the Uinta Region were geochemically evaluated using portable X-ray fluorescence ( n = 3,113) and inductively coupled plasma-mass spectrometry ( n = 145) elemental analytical methods. Results suggest that 24%–45% of stratigraphically coal-adjacent carbonaceous shale and siltstone units show rare earth element enrichment (>200 ppm), as do 100% of sampled igneous material. A small subset (5%–8%) of coal samples display rare earth element enrichment, specifically in cases containing volcanic ash. This study proposes two multi-step depositional and diagenetic models to explain the enrichment process, requiring the emplacement and mobilization of rare earth element source material due to hydrothermal and other external influences. Historical geochemical evaluations of Uinta Region coal and coal-adjacent data are sparse, emphasizing the statistical significance of this research. These results support the utilization of active mines and coal processing waste piles for the future of domestic rare earth element extraction, offering economic and environmental solutions to pressing global demands.

Coe, Haley H.↗
DOE OSTI2021

Prediction of Thermal Conditions of DED With FEA Metal Additive Simulation

This paper presents the integration of wire-arc additive manufacturing (WAAM) using Gas Metal Arc Welding (GMAW) into a machine tool to create a retrofit hybrid computer numeric control (CNC) machine tool. GMAW, along with other direct energy deposition systems, has the capacity to deposit material faster than the excess thermal energy can dissipate. This results in the need to allow the part to cool between consecutive layers, which is the most time-consuming part of the additive process. Finite element analysis (FEA) was used in conjunction with monitored build plate surface temperatures during deposition samples to improve adequate dwell time prediction and to develop a cooling system. A deposition was completed where no dwell time was used and the build plate along with the machine table temperatures were monitored. A second deposition was completed where only one bead was deposited and the traverse speed was increased. The GMAW welder was mounted on a 3-axis CNC machine where two square deposition samples were completed. A FEA model was designed and verified using the monitored samples. The model will be used to determine improved depositions speeds and whether forced cooling would allow for an increased deposition rate without structural failure. It was determined the FEA software can be used to accurately model and predict the thermal response of WAAM AM components.

Heinrich, Lauren↗
DOE OSTI2021

FY21 Status Report: Probabilistic SCC Model for SNF Dry Storage Canisters

Stress corrosion cracking (SCC) is an important failure degradation mechanism for storage of spent nuclear fuel. Since 2014, Sandia National Laboratories has been developing a probabilistic methodology for predicting SCC. The model is intended to provide qualitative assessment of data needs, model sensitivities, and future model development. In fiscal year 2021, improvement of the SCC model focused on the salt deposition, maximum pit size, and crack growth rate models.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

Transport of colloidal particles in microscopic porous medium analogs with surface charge heterogeneity: experiments and fundamental role of single-bead deposition

Understanding colloid transport in subsurface environments is challenging due to complex interactions between colloids, ground water, and porous media over several length scales. Here, we study the transport of colloidal particles through bead-assembled microfluidic porous media analogs (PMAs) with surface charge heterogeneity. The pore-scale dynamics of colloidal particle deposition were measured, as well as the breakthrough curves (BTC) and retention profiles (RP) of deposited colloidal particles at the scale of the entire PMA. From pore-scale experiments, the maximum surface coverage (?max = 0.51) was measured directly, from which the surface blocking function and deposition coefficient (kpore = 3.56 s-1) were obtained. Using these pore-scale parameters, the transport of colloidal particles was modeled using a one-dimensional advection-dispersion equation under the assumption of irreversible adsorption between oppositely charged beads and colloids, showing good agreement with experimental data. This work presents a new approach to fabricate chemically heterogeneous porous media in a microfluidic device that enables direct measurements of pore-scale colloidal deposition. The approach allows a quantitative prediction of colloidal breakthrough and retention via coupling of direct measurements and an advection-dispersion-deposition model.

Guo, Yang↗
DOE OSTI2021

Accounting for uncertainty in complex alluvial aquifer modeling by Bayesian multi-model approach

Alluvial aquifers by nature are complex caused by varied depositional environments. Developing a reliable groundwater model to represent an alluvial aquifer is non-trivial. Also, relying on a single best calibrated model may not be sufficient because of an inadequate choice of model parameter values. To better understand groundwater dynamics and improve model prediction reliability, this study presents a Bayesian multi-model uncertainty quantification (BMMUQ) framework to account for model parameter uncertainty in complex alluvial groundwater modeling. The methodology was applied to the agriculturally intensive Mississippi River alluvial aquifer (MRAA), Northeast Louisiana. An aquifer architecture was first constructed using 7,259 well logs in the MRAA area which covers three fluvial deposits (alluvium, braided-stream terrace, and braided-stream terrace-loess). A 12-layer MODFLOW model was then developed to address the alluvial aquifer complexity and well calibrated through a genetic algorithm. This study quantified model parameter uncertainty in hydraulic conductivity and specific storage of sand facies. Bayesian model averaging (BMA) with the Expectation Maximization (EM) algorithm was adopted to derive posterior model weights and head variances of 50 alternative conceptual groundwater flow models, and thereby obtains BMA ensemble model predictions instead of only relying on the best calibrated conceptual model. Overall, results show that an estimated around 950 million m3 of groundwater storage loss occurs in 2015 with respect to the beginning of 2004, due to high groundwater demand for irrigation in the MRAA area. Explicitly quantifying model uncertainty can produce more reliable groundwater level predictions from BMA ensemble model. The presented groundwater modeling framework improves our understanding of the MRAA and provides a valuable tool to assist agricultural water management.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Density functional theory-based surrogate kinetic models for heterogeneous reactions of hydrocarbon intermediates on silicon carbide

The increasing demand for high-performance materials in advanced technologies highlights the importance of achieving a fundamental understanding and potential control of silicon carbide (SiC) deposition processes. However, existing models often lack sufficient theoretical detail, relying heavily on empirical data and offering limited predictive capability. In particular, the complex surface chemistry governing SiC growth remains poorly understood. This study addresses these challenges by employing density functional theory (DFT) to investigate key heterogeneous reactions involving hydrocarbon intermediates on SiC surfaces, including dehydrogenation, hydrogenation, and carbon deposition. Transition state searches were conducted to identify reaction pathways and energy barriers. While first-principles calculations offer high accuracy, they are computationally intensive. To extend the utility of these first-principles results, vibrational analyses were performed using phonon-based statistical thermochemistry to compute temperature-dependent reaction rates which were used to develop Arrhenius-type surrogate kinetic models. Furthermore, the resulting framework provides a more rigorous, physically grounded basis for integrating atomistic insights into continuum-scale modeling, ultimately enabling improved prediction and optimization of SiC film growth in high-performance material systems.

Density Functional Theory↗
DOE OSTI2022

Towards fast and accurate predictions of radio frequency power deposition and current profile via data-driven modelling: applications to lower hybrid current drive

Three machine learning techniques (multilayer perceptron, random forest and Gaussian process) provide fast surrogate models for lower hybrid current drive (LHCD) simulations. A single GENRAY/CQL3D simulation without radial diffusion of fast electrons requires several minutes of wall-clock time to complete, which is acceptable for many purposes, but too slow for integrated modelling and real-time control applications. The machine learning models use a database of more than 16 000 GENRAY/CQL3D simulations for training, validation and testing. Latin hypercube sampling methods ensure that the database covers the range of nine input parameters ( $n_{e0}$ , $T_{e0}$ , $I_p$ , $B_t$ , $R_0$ , $n_{\|}$ , $Z_{{\rm eff}}$ , $V_{{\rm loop}}$ and $P_{{\rm LHCD}}$ ) with sufficient density in all regions of parameter space. The surrogate models reduce the inference time from minutes to $\sim$ ms with high accuracy across the input parameter space.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

A Stochastic Transport Model for the Cumulative Number of Fissions and Deposited Fission Energy

The stochastic theory of neutron transport is extended to describe the cumulative distribution of fission numbers and deposited fission energy in a multiplying assembly. Solutions for the probability distributions are obtained using analytical approximations and Monte Carlo simulation in lumped geometry and in symmetric homogeneous and heterogeneous spheres. The results show the development of a power-law tail in the steady state fission number and deposited energy distributions when the medium is critical, independent of the fission neutron multiplicity distribution and domain heterogeneity. In contrast, the asymptotic decay is faster than exponential in subcritical media due to rapid chain extinction and in supercritical media due to the increasing probability of chain divergence. Here, a formal asymptotic analysis of the problem in lumped geometry with an arbitrary fission neutron multiplicity confirms the existence of power-law tails at critical.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Arctic Black Carbon Aerosol Deposition Study North Slope of Alaska 2020- UHSAS Measurements

Particles are removed from the atmosphere through both wet and dry deposition. These processes are poorly understood, though they constitute important uncertainties in climate and air quality models. This project aims to use observational constraints on particle fluxes to improve model representations of dry deposition. Within this data set, we measured fluxes of size resolved particles with an ultrahigh sensitivity aerosol spectrometer (UHSAS) at the ARM facility’s North Slope Alaska site. Measurements were made at the meteorological tower between 9 Sept and 25 Oct 2021. This site is a coastal tundra location and received snow during the project.

Aerosol concentration↗
DOE OSTI2025

Arctic Black Carbon Aerosol Deposition Study North Slope of Alaska 2020- SP2 Measurements

Particles are removed from the atmosphere through both wet and dry deposition. These processes are poorly understood, though they constitute important uncertainties in climate and air quality models. This project aims to use observational constraints on particle fluxes to improve model representations of dry deposition. Within this data set, we measured refractory black carbon with a single particle soot photometer (SP2) at the ARM facility’s North Slope of Alaska site. Measurements were made at the meteorological tower between 9 Sept and 27 Oct 2021. This site is a coastal tundra location, and received snow during the project.

Black carbon mass concentration↗
DOE OSTI2025

Arctic Black Carbon Aerosol Deposition Study North Slope of Alaska 2020- Sonic Anemometer Measurements

Particles are removed from the atmosphere through both wet and dry deposition. These processes are poorly understood, though they constitute important uncertainties in climate and air quality models. This project aims to use observational constraints on particle fluxes to improve model representations of dry deposition. Within this data set, we measured wind properties using a sonic anemometer. Measurements were made at the meteorological tower between 9 Sept and 25 Oct 2021. This site is a coastal tundra location, and received snow during the project.

Gill Windmaster 3D Ultrasonic Anemometer↗
DOE OSTI2026

Arctic Black Carbon Aerosol Deposition Study North Slope of Alaska 2020- ACSM Measurements

Particles are removed from the atmosphere through both wet and dry deposition. These processes are poorly understood, though they constitute important uncertainties in climate and air quality models. This project aims to use observational constraints on particle fluxes to improve model representations of dry deposition. In support of black carbon (SP2) and particles (UHSAS) flux measurements at the meteorological tower, we measured non-refractory chemically-speciated aerosol composition with an Aerosol Chemical Speciation Monitor at the the NSA Central Facility (C1). ACSM measurements were made between 9 Sept and 26 Oct 2021. This site is a coastal tundra location, and received snow during the project.

Chl_ACSM↗
DOE OSTI2026

Arctic Black Carbon Aerosol Deposition Study North Slope of Alaska 2020- ACSM Measurements

Particles are removed from the atmosphere through both wet and dry deposition. These processes are poorly understood, though they constitute important uncertainties in climate and air quality models. This project aims to use observational constraints on particle fluxes to improve model representations of dry deposition. In support of black carbon (SP2) and particles (UHSAS) flux measurements at the meteorological tower, we measured non-refractory chemically-speciated aerosol composition with an Aerosol Chemical Speciation Monitor at the the NSA Central Facility (C1). ACSM measurements were made between 9 Sept and 26 Oct 2021. This site is a coastal tundra location, and received snow during the project.

Aerosol Chemical Speciation Monitor↗
DOE OSTI2022

Towards Fast and Accurate Predictions of Radio Frequency Power Deposition and Current Profile via Data-driven Modeling

Three machine learning techniques (multilayer perceptron, random forest, and Gaussian process) provide fast surrogate models for lower hybrid current drive (LHCD) simulations. A single GENRAY/CQL3D simulation without radial diffusion of fast electrons requires several minutes of wall-clock time to complete, which is acceptable for many purposes, but too slow for integrated modeling and real-time control applications. The machine learning models use a database of 16,000+ GENRAY/CQL3D simulations for training, validation, and testing. Latin hypercube sampling methods ensure that the database covers the range of 9 input parameters ($n_{e0}$, $T_{e0}$, $I_p$, $B_t$, $R_0$, $n_{||}$, $Z_{eff}$, $V_{loop}$, $P_{LHCD}$) with sufficient density in all regions of parameter space. The surrogate models reduce the inference time from minutes to ~ms with high accuracy across the input parameter space.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗