SEARCH · Search NASA

Results for “depth sectioning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

All sources NASA NTRS DOE OSTI

NASA NTRS1989

Mesoscale eddies, jets, and fronts off Point Arena, California, July 1986

The horizontal and vertical mesoscale physical structure of the broad, cold filament observed off Point Arena in advanced very high resolution radiometer (AVHRR) images in June and July 1986 are investigated. Small-scale intrusive features are shown in vertical sections of temperature and salinity from tow-yo conductivity-temperature-depth data. A regional perspective of the filament structure and its evolution is given using the AVHRR satellite imagery.

Rienecker, Michele M.↗

NASA NTRS2003

Decomposing Solid Micropropulsion Nozzle Performance Issues

Micropropulsion technology is essential to the success of miniaturized spacecraft and can provide ultra-precise propulsion for small spacecraft. NASA Glenn Research Center has envisioned a micropropulsion concept that utilizes decomposing solid propellants for a valveless, leak-free propulsion system. Among the technical challenges of this decomposing solid micropropulsion concept is optimization of miniature, rectangular nozzles. A number of flat micronozzles were tested with ambient-temperature nitrogen and helium gas in a vacuum facility. The thrusters were etched out of silicon and had throat widths on the order of 350 microns and throat depths on the order of 250 microns. While these were half-sections of thrusters (two would be bonded together before firing), testing provided the performance trend for nozzles of this scale and geometry. Area ratios from 1 to 25 were tested, with thrust measured using an inverted pendulum thrust stand for nitrogen flows and a torsional thrust stand for helium. In the nitrogen testing, peak nozzle performance was achieved around area ratio of 5. In the helium series, nozzle performance peaked for the smallest nozzle tested area ratio 1.5. For both gases, there was a secondary performance peak above area ratio 15. At low chamber pressures (< 1.6 atm), nitrogen provided higher nozzle performance than helium. The performance curve for helium was steeper, however, and it appeared that helium would provide better performance than nitrogen at higher chamber pressures.

Reed, Brian↗

DOE OSTI2025

Thermal and Well Flow Performance of Closed-Loop Geothermal in the Wattenberg Area

Closed-loop geothermal systems provide an alternative to resource-constrained hydrothermal systems and stimulation-intensive enhanced geothermal systems. In this work, we apply the slender-body theory (SBT) model, to simulate the well flow and heat transfer performance of U-loop well designs in the Wattenberg area of the Denver-Julesburg Basin. Three U-loop well patterns are investigated, including a single-, double-, and multi-lateral design. The subsurface within the area of interest is characterized by deep, hot (> 200 degrees C) igneous/metamorphic basement rock underlying multiple sedimentary formations. The lateral section(s) of the U-loop lie(s) within a target depth of 6 km, where temperatures are estimated to approach 300 degrees C. As a base case, conduction-only heat transfer is investigated through simulations with the SBT model within U-loops with open-hole laterals that exchange heat directly with the hot, dry rock using water as a working fluid. The utilization of supercritical CO2 as a heat transfer fluid is also considered. For each scenario, the system performance in terms of annual heat production and temperature profile over a 20-year project lifetime are assessed. Also, the levelized costs of heat and electricity (LCOH and LCOE) are determined using a top-down techno-economic analysis model. The results show that the performance- and cost-optimized U-loop design is one having an injection-production well spacing of 1,000 meters with ten 50-meter-spaced laterals that traverse a subsurface system with a temperature gradient of 60 degrees C/km. By injecting 20 degrees C-water at a rate of 60 kg/s through this loop, an average heat production of 19 MWth (i.e., 2.2 MWe net plant output) can be achieved, resulting in an LCOE and LCOH of $136/MWhe and $1.53/GJ, respectively, over a 20-year project life.

closed-loop geothermal↗

NASA NTRS2012

Algorithms for Determining Physical Responses of Structures Under Load

Ultra-efficient real-time structural monitoring algorithms have been developed to provide extensive information about the physical response of structures under load. These algorithms are driven by actual strain data to measure accurately local strains at multiple locations on the surface of a structure. Through a single point load calibration test, these structural strains are then used to calculate key physical properties of the structure at each measurement location. Such properties include the structure s flexural rigidity (the product of the structure's modulus of elasticity, and its moment of inertia) and the section modulus (the moment of inertia divided by the structure s half-depth). The resulting structural properties at each location can be used to determine the structure s bending moment, shear, and structural loads in real time while the structure is in service. The amount of structural information can be maximized through the use of highly multiplexed fiber Bragg grating technology using optical time domain reflectometry and optical frequency domain reflectometry, which can provide a local strain measurement every 10 mm on a single hair-sized optical fiber. Since local strain is used as input to the algorithms, this system serves multiple purposes of measuring strains and displacements, as well as determining structural bending moment, shear, and loads for assessing real-time structural health. The first step is to install a series of strain sensors on the structure s surface in such a way as to measure bending strains at desired locations. The next step is to perform a simple ground test calibration. For a beam of length l (see example), discretized into n sections and subjected to a tip load of P that places the beam in bending, the flexural rigidity of the beam can be experimentally determined at each measurement location x. The bending moment at each station can then be determined for any general set of loads applied during operation.

Richards, W. Lance↗

NASA NTRS1993

Petrography and preliminary interpretations of the crystalline breccias from the Manson M-1 core

The M-1 core was drilled on the eastern edge of the central uplift within the Manson Impact Structure in Iowa. The lower 107.9 m of the core consists of crystalline breccias. Twelve intervals of thin sections from this core have been studied for preliminary discussion. The breccias are divided into three units by matrix size and abundance. Unit 1 is characterized by a high volume fraction of matrix, and a decreasing proportion of matrix with depth. This matrix is nearly isotropic and consists of grains less than 0.005 to less than 0.02 mm in length. The matrix between 112 and 146 meters depth consists of a crystalline intergrowth of felsic and opaque minerals with or without chlorite. This was the hottest section of the core after impact, and may have undergone high temperature metamorphic recrystallization. Unit 2 is transitional between units 1 and 3, and is delineated by a rapid increase in grain size to .01-.04 mm and a decrease in matrix abundance to 10 percent. Unit 3 has a coarse, often porous matrix, whose abundance changes from about 10 percent at the top to about 2 percent at the base. Grain sizes range from 0.01-0.1 mm over this interval and coarsen with depth. Changes in the character of the matrix as well as the changes in clast lithology and abundance outlined below suggest that unit 3 is in-situ brecciated basement with injected melt and shale fragments; unit 1 is a crater veneer deposit consisting of transported basement materials and unit 2 is a mixed zone between units 1 and 3.

Bell, M. S.↗

NASA NTRS2015

The Degradational History of Endeavour Crater, Mars

Endeavour crater (2.28 deg S, 354.77 deg E) is a Noachian-aged 22 km-diameter impact structure of complex morphology in Meridiani Planum. The degradation state of the crater has been studied using Mars Reconnaissance Orbiter and Opportunity rover data. Exposed rim segments rise approximately 10 m to approximately 100 m above the level of the embaying Burns Formation and the crater is 200-500 m deep with the southern interior wall exposing over approximately 300 m relief. Both pre-impact rocks (Matijevic Formation) and Endeavour impact ejecta (Shoemaker Formation) are present at Cape York, but only the Shoemaker crops out (up to approximately 140 m) along the rim segment from Murray Ridge to Cape Tribulation. Study of pristine complex craters Bopolu and Tooting, and morphometry of other martian complex craters, enables us to approximate Endeavour's pristine form. The original rim likely averaged 410 m (+/-)200 m in elevation and a 250-275 m section of ejecta ((+/-)50-60 m) would have composed a significant fraction of the rim height. The original crater depth was likely between 1.5 km and 2.2 km. Comparison between the predicted original and current form of Endeavour suggests approximately 100-200 m rim lowering that removed most ejecta in some locales (e.g., Cape York) while thick sections remain elsewhere (e.g., Cape Tribulation). Almost complete removal of ejecta at Cape York and minimal observable offset across fractures indicates current differences in rim relief are not solely due to original rim relief. Rim segments are embayed by approximately 100-200 m thickness of plains rocks outside the crater, but thicker deposits lie inside the crater. Ventifact textures confirm ongoing eolian erosion with the overall extent difficult to estimate. Analogy with degraded Noachian-aged craters south of Endeavour, however, suggests fluvial erosion dominated rim degradation in the Noachian and was likely followed by approximately 10s of meters modification by alternate processes. Such degradation is consistent with 1) the interpretation of a pediment on the rim flanks of Endeavour, 2) the formation of features such as Marathon Valley, 3) the nearly complete removal of ejecta at Cape York, 4) preservation of a thicker section of ejecta at Cape Tribulation and perhaps, 5) the origin of some gaps in the rim around the crater. A paucity of debris shed from the rim indicates most degradation occurred prior to embayment by the plains rocks.

Grant, J. A.↗

DOE OSTI2024

Radionuclide tracing based in situ corrosion and mass transport monitoring of 316L stainless steel in a molten salt closed loop

In the study, we report an in situ corrosion and mass transport monitoring method developed using a radionuclide tracing technique for the corrosion study of 316L stainless steel (316L SS) in a NaCl–MgCl 2 eutectic molten salt natural circulation loop. This method involves cyclotron irradiation of a small tube section with 16 MeV protons, later welds at the hot leg of the molten salt flow loop, generating radionuclides 51 Cr, 52 Mn, and 56 Co at the salt–alloy interface. By measuring the activity variations of these radionuclides at different sections along the loop, both the in situ monitoring of the corrosion attack depth of 316L SS and corrosion product transport and its precipitation in flowing NaCl–MgCl 2 molten salt are achieved. While 316L SS is the focus of this study, the technique reported herein can be extended to other structural materials being used in a wide range of industrial applications.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Collisional excitation of C2H− by H2: New interaction potential and scattering calculations

Interstellar anions play an important role in astrochemistry as being tracers of the physical and chemical conditions in cold molecular clouds and circumstellar gas. The local thermodynamic equilibrium is generally not fulfilled in media where anions are detected and radiative and collisional data are required to model the observed lines. The C2H− anion has not yet been detected in the interstellar medium; however, collisional data could be used for non-LTE models that would help in identifying the most intense lines. For this purpose, we have computed the first 4D potential energy surface (PES) of the C2H−–H2 complex using an explicitly correlated coupled-cluster approach. The PES is characterized by a single deep minimum with a well-depth of 924.96 cm−1. From this interaction potential, we derived excitation cross sections and rate coefficients of C2H− induced by collisions with para- and ortho-H2. The results obtained for collisions with para-H2 are compared to previous calculations performed using a 2D-PES obtained from an average over H2 rotations.

Chemistry↗

DOE OSTI2024

Literature Review of Thermomechanical Analysis (TMA)

A literature review of thermomechanical analysis (TMA) is presented. A basic introduction to TMA components, theory, and application is followed by an in-depth overview of TMA probes (expansion, penetration, tension, and flexure) and their uses. Sections for calibration and sample preparation are included as a guide for instrumentation usage. The literature review concludes with a section on modulated TMA and a summary of the instrument.

36 MATERIALS SCIENCE↗

NASA NTRS1971

Computer Program and User Documentation Medical Data Input System

Several levels of documentation are presented for the program module of the NASA medical directorate minicomputer storage and retrieval system. The biomedical information system overview gives reasons for the development of the minicomputer storage and retrieval system. It briefly describes all of the program modules which constitute the system. A technical discussion oriented to the programmer is given. Each subroutine is described in enough detail to permit in-depth understanding of the routines and to facilitate program modifications. The program utilization section may be used as a users guide.

Anderson, J.↗

NASA NTRS1974

Apollo 16: Core 60004 - Preliminary study of less than 1 mm fines

The article studies the possible variation of mineralogy as a function of both grain size and depth within the core of less than 1 mm fines, for the core section 60004 from Apollo 16. Twelve samples of the fines were dry sieved. The grain size analysis showed a bimodal distribution for all samples, indicating a competing process of grain size degeneration and agglutinate formation. Approximately 99% of the minerals in the samples examined consisted of plagioclase feldspar, pyroxene and olivine, with plagioclase the dominant phase. The various minerals were analyzed, using standard electron microprobe techniques, as a function of size range for each sample, and the representative analyses are presented. Several types of glass were also analyzed, ranging in color from orange through yellow and green to colorless. The investigation of the chemical variations of mineral and lithic clasts from the top and the bottom of the core suggests that although minor variations are present, the regolith was derived from fairly homogeneous sources.

Meyer, H. O. A.↗

NASA NTRS1988

Characterization of microcomposite polyimide films

Thermally stable microcomposite polyimide films were prepared by the homogeneous incorporation of either a soluble metal salt or a metal complex into a poly(amide-acid)/N,N-dimethylacetamide solution. The thermal processing of films solvent cast onto glass substrates and cured in an appropriate atmosphere yields films containing not only a fairly uniform dispersion of submicrometer particles, but also a new surface layer of metal or metal oxide. These polymeric systems have been characterized using X-ray photoelectron spectroscopy, Auger electron spectroscopy with depth profiling via argon ion etching, transmission electron microscopy of ultramicrotomed cross-sections, scanning electron microscopy, elemental analysis, thermal analysis, and variable temperature electrical resistivity determinations. The data from these techniques were used cooperatively to develop a model for these microcomposite polyimide films.

Rancourt, J. D.↗

NASA NTRS1992

Topography of Apollinaris Patera and Ma'adim Vallis

Digital elevation models of the northern part of Ma'adim Vallis (603a41 607m/pix, 639a91 721m/pix), and Apollinaris Patera (603a42 612m/pix, 639a92 717m/pix), covering the area between 180 degrees to 190 degrees long and -2 degrees to -20 degrees lat. were obtained using a method described here. The results for the Ma'adim Vallis area show broad agreement with the United States Geological Survey (USGS) topographic map of the area with a channel depth of 1 to 2 km. A detailed study of the variations in the channel depth along its course and calculations of its discharge rate from channel cross section and slope are currently being undertaken. Results for Apollinaris Patera have been obtained, although the absolute heights relative to the Mars datum are not well constrained. However, the relative heights are sufficient for some analysis. Again, the topographic map is in reasonable agreement with the USGS map of the area, although there are significant differences.

Thornhill, G. D.↗

NASA NTRS1993

Space environmental effects on LDEF composites: A leading edge coated graphite epoxy panel

The electronics module cover for the leading edge (Row D 9) experiment M0003-8 was fabricated from T300 graphite/934 epoxy unidirectional prepreg tape in a (O(sub 2), +/- 45, O(sub 2), +/- 45, 90, 0)(sub s) layup. This 11.75 in x 16.75 in panel was covered with thermal control coatings in three of the four quadrants with the fourth quadrant uncoated. The composite panel experienced different thermal cycling extremes in each quadrant due to the different optical properties of the coatings and bare composite. The panel also experienced ultraviolet (UV) and atomic oxygen (AO) attack as well as micrometeoroid and space debris impacts. An AO reactivity of 0.99 x 10(exp -24) cm(sup 3)/atom was calculated for the bare composite based on thickness loss. The white urethane thermal control coatings (A276 and BMS 1060) prevented AO attack of the composite substrate. However, the black urethane thermal control coating (Z306) was severely eroded by AO, allowing some AO attack of the composite substrate. An interesting banding pattern on the AO eroded bare composite surface was investigated and found to match the dimensions of the graphite fiber tow widths as prepregged. Also, erosion depths were greater in the darker bands. Five micrometeoroid/space debris impacts were cross sectioned to investigate possible structural damage as well as impact/AO interactions. Local crushing and delaminations were found to some extent in all of the impacts. No signs of coating undercutting were observed despite the extensive AO erosion patterns seen in the exposed composite material at the impact sites. An extensive microcrack study was performed on the panel along with modeling of the thermal environment to estimate temperature extremes and thermal shock. The white coated composite substrate displayed almost no microcracking while the black coated and bare composite showed extensive microcracking. Significant AO erosion was seen in many of the cracks in the bare composite.

George, Pete E.↗

NASA NTRS2000

Highly ordered vertical structure of Synechococcus populations within the one-millimeter-thick photic zone of a hot spring cyanobacterial mat

A variety of contemporary techniques were used to investigate the vertical distribution of thermophilic unicellular cyanobacteria, Synechococcus spp., and their activity within the upper 1-mm-thick photic zone of the mat community found in an alkaline siliceous hot spring in Yellowstone National Park in Wyoming. Detailed measurements were made over a diel cycle at a 61 degrees C site. Net oxygenic photosynthesis measured with oxygen microelectrodes was highest within the uppermost 100- to 200-microm-thick layer until midmorning, but as the day progressed, the peak of net activity shifted to deeper layers, stabilizing at a depth of 300 microm from midday throughout the afternoon. Examination of vertical thin sections by bright-field and autofluorescence microscopy revealed the existence of different populations of Synechococcus which form discrete bands at different vertical positions. Denaturing gradient gel electrophoresis analysis of PCR-amplified 16S rRNA gene segments from horizontal cryosections obtained at 100-microm-thick vertical intervals also suggested vertical stratification of cyanobacterial, green sulfur bacterium-like, and green nonsulfur bacterium-like populations. There was no evidence of diel migration. However, image analysis of vertical thin sections revealed the presence of a narrow band of rod-shaped Synechococcus cells in which the cells assumed an upright position. These upright cells, located 400 to 800 microm below the surface, were observed only in mat samples obtained around noon. In mat samples obtained at other time points, the cells were randomly oriented throughout the mat. These combined observations reveal the existence of a highly ordered structure within the very thin photic zone of this hot spring microbial mat, consisting of morphologically similar Synechococcus populations that are likely to be differentially adapted, some co-occurring with green sulfur bacterium-like populations, and all overlying green nonsulfur bacterium-like populations.

Non-NASA Center↗

NASA NTRS1999

A source of experimental underestimation of aerosol bolus deposition

We examined the measurement error in inhaled and exhaled aerosol concentration resulting from the bolus delivery system when small volumes of monodisperse aerosols are inspired to different lung depths. A laser photometer that illuminated approximately 75% of the breathing path cross section recorded low inhaled bolus half-widths (42 ml) and negative deposition values for shallow bolus inhalation when the inhalation path of a 60-ml aerosol was straight and unobstructed. We attributed these results to incomplete mixing of the inhaled aerosol bolus over the breathing path cross section, on the basis of simultaneous recordings of the photometer with a particle-counter sampling from either the center or the edge of the breathing path. Inserting a 90 degrees bend into the inhaled bolus path increased the photometer measurement of inhaled bolus half-width to 57 ml and yielded positive deposition values. Dispersion, which is predominantly affected by exhaled bolus half-width, was not significantly altered by the 90 degrees bend. We conclude that aerosol bolus-delivery systems should ensure adequate mixing of the inhaled bolus to avoid error in measurement of bolus deposition.

Non-NASA Center↗

DOE OSTI2020

Regional Geologic Cross Sections for Potential Storage and Containment Zones in the MRCSP Region

The Midwest Regional Carbon Sequestration Partnership (MRCSP) has incorporated the work of geologic research teams (Geoteams) in its regional characterization, project planning and carbon dioxide (CO 2 ) injection implementation work since the partnership was established by the U.S. Department of Energy (DOE) in 2003. Over this 16-year period, the cohort of Geoteams has grown from five to ten states and has contributed to the characterization of geologic sequestration opportunities, refinement of reservoir and seal data, and supported injection efforts through both predictive and post-injection assessments. Five geologic cross sections (labeled A through E) were constructed onshore across the parts of the MRCSP Region west of the Valley and Ridge Province, and one section (labeled F) was constructed beginning onshore in New Jersey and running eastward to offshore areas examined for carbon storage. Regional and local stratigraphic units were used in these cross sections to show current nomenclature as well as highlighting specific units/features pertinent to carbon capture, utilization and storage (CCUS) opportunities in the region. Each cross section uses 15 to 25 deep wells and other geologic information to illustrate the relative depth, thickness and location of rock units in the subsurface.

01 COAL, LIGNITE, AND PEAT↗

NASA NTRS1985

Determination of band oscillator strengths of atmospheric molecules from high resolution vacuum ultraviolet cross section measurements

An account is given of progress during the six month period 1/11/84 to 4/30/85 in work on: (1) rovibronic assignments of the Schumann-Runge bands of O2-18; and (2) optical depth measurements of the Schumann-Runge bands of O2-18. The work summarized above is part of a comprehensive spectroscopic investigation of the absorption wavelengths, rotational line assignments, cross sections, and band oscillator strengths of the Schumann-Runge bands of O2-18 and O-18 O-16 in the wavelength region 175-205 nm. The investigation is conducted at high resolution with a 6.65 m scanning spectrometer/spectrograph which is, by reason of its small instrumental width (FWHM = 0.0013 nm), uniquely suitable for cross section measurements of molecular bands with discrete rotational structure. Absolute cross sections, which are independent of the instrumental function and from which band oscillator strengths are directly determined, will be measured for the absorption bands that are most predissociated.

Parkinson, W. H.↗