Search NASA⌕ Search

SEARCH · Search NASA

Results for “differential expansion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Modeling In-Reactor Temperature Gradients in Lithium Aluminate Ceramic Pellets

In reactor thermal performance of lithium aluminate ceramic pellets are calculated to determine operating temperatures if internal components shift during irradiation. A 2D conduction model was setup to model this scenario with additional physics, including thermal expansion of components to reactor temperatures, creep down of the cladding due to differential pressure between the inside of the rod and reactor coolant system, and net radiation exchange between components. The non-linear coupling of the governing equations presented convergence challenges due to the very different effects from a small temperature change on the radiation vs radial and circumferential conduction equations. Initial temperature guesses for the multidimensional solution were provided from conservative 1D models simulating bounding scenarios. Convergence was greatly improved by taking small steps towards the root solutions and averaging with initial guesses. The final method robustly converged all 132 points at an axial plane after a few dozen iterations. The temperature results show that the additional physics have a secondary effect as the dominant heat transfer mechanism is radial conduction across the gas gap followed by circumferential conduction around components. Circumferential conduction in the lithium aluminate pellets is enhanced by the relatively high thermal conductivity of this ceramic.

Carstens, Nathan A.↗
NASA NTRS1989

Real-time approximate optimal guidance laws for the advanced launch system

An approach to optimal ascent guidance for a launch vehicle is developed using an expansion technique. The problem is to maximize the payload put into orbit subject to the equations of motion of a rocket over a rotating spherical earth. It is assumed that the thrust and gravitational forces dominate over the aerodynamic forces. It is shown that these forces can be separated by a small parameter epsilon, where epsilon is the ratio of the atmospheric scale height to the radius of the earth. The Hamilton-Jacobi-Bellman or dynamic programming equation is expanded in a series where the zeroth-order term (epsilon = 0) can be obtained in closed form. The zeroth-order problem is that of putting maximum payload into orbit subject to the equations of motion of a rocket in a vacuum over a flat earth. The neglected inertial and aerodynamic terms are included in higher order terms of the expansion, which are determined from the solution of first-order linear partial differential equations requiring only quadrature integrations. These quadrature integrations can be performed rapidly, so that real-time approximate optimization can be used to construct the launch guidance law.

Speyer, Jason L.↗
NASA NTRS1990

A real-time approximate optimal guidance law for flight in a plane

A real-time guidance scheme is presented for the problem of maximizing the payload into orbit subject to the equations of motion of a rocket over a nonrotating spherical earth. The flight is constrained to a path in the equatorial plane while reaching an orbital altitude at orbital injection speeds. The dynamics of the problem can be separated into primary and perturbation effects by a small parameter, epsilon, which is the ratio of the atmospheric scale height to the radius of the earth. The Hamilton-Jacobi-Bellman or dynamic programming equation is expanded in an asymptotic series where the zeroth-order term (epsilon = 0) can be obtained in closed form. The neglected perturbation terms are included in the higher-order terms of the expansion, which are determined from the solution of first-order linear partial differential equations requiring only integrations which are quadratures. The quadratures can be performed rapidly with emerging computer capability, so that real-time approximate optimization can be used to construct the launch guidance law. The application of this technique to flight in three-dimensions is made apparent from the solution presented.

Feeley, Timothy S.↗
NASA NTRS1973

A semi-analytical method of computation of oceanic tidal perturbations in the motion of artificial satellites

The method of expansion of the satellite's perturbations, as caused by the oceanic tides, into Fourier series is discussed. The coefficients of the expansion are purely numerical and peculiar to each particular satellite. Such a method is termed as semi-analytical in celestial mechanics. Gaussian form of the differential equations for variation of elements, with the right hand sides averaged over the orbit of the satellite, is convenient to use with the semi-analytical expansion.

Musen, P.↗
DOE OSTI2020

High-Temperature Thermodynamics of Cerium Silicates, A-Ce 2 Si 2 O 7 , and Ce 4.67 (SiO 4 ) 3 O

Lanthanide disilicates and oxyapatites have potential roles in high temperature applications as thermal (TBC) and environmental barrier coatings (EBC), or possible alteration phases in geological nuclear waste repositories. However, those Ce 3+ -bearing silicates have only been limitedly studied. In this work, we performed detailed structural and thermodynamic investigations on A-Ce 2 Si 2 O 7 (tetragonal, P4 1 ) and Ce 4.67 (SiO 4 ) 3 O (hexagonal, P6 3 /m). The high temperature structural behaviors and coefficients of thermal expansion were determined by in situ high temperature synchrotron X-ray diffraction (HT-XRD) implemented with Rietveld analysis and thermogravimetric analysis coupled with differential scanning calorimetry (TGA-DSC). A-Ce 2 Si 2 O 7 was found to be stable in N 2 and air up to ~1483 K with anisotropic thermal expansion along the a and c axes (α a = 12.3 × 10 -6 K -1 and α c = 12.4 × 10 -6 K -1 ). Ce 4.67 (SiO 4 ) 3 O had a slow partial oxidation between 533 K and 873 K to a new nonstoichiometric phase Ce 3+ 1.67- xCe4 + x Ce 3+ 3 (SiO 4 ) 3 O 1+0.5x , followed by a thermal decomposition to CeO 2 and SiO 2 at ~1000 K in air. By using high temperature oxide melt solution calorimetry at 973 K with lead borate as the solvent, the standard enthalpy of formation was determined for A-Ce 2 Si 2 O 7 (-3825.1 ± 6.0 kJ/mol) and Ce 4.67 (SiO 4 ) 3 O (-7391.3 ± 9.5 kJ/mol). Finally, these thermodynamic parameters were compared with those of CeO 2 , CeSiO 4 , and other silicate oxyapatites for examining their chemical stability in high temperature environments relevant for aeronautical applications, mineral formation, and nuclear fuel cycle.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Cleavable magnetic materials from van der Waals layered transition metal halides and chalcogenides

The study of exfoliated 2D magnetic materials is a vibrant and rapidly progressing field and is impacting many areas of condensed matter research including fundamental magnetism, spintronics and optoelectronics, and topological spin and electronic systems. The availability of promising candidate materials has enabled much of the progress in this field. Here, I present my perspective on the development of cleavable magnetic materials with a focus on transition metal halides and chalcogenides and an emphasis on crystal structure and magnetic order. To give proper context for these discussions, brief and incomplete surveys of recent work are included, focusing on specific aspects that I find most useful for guiding work on emerging materials and motivating expansion into other compounds and material families. Several instances of structural changes that can differentiate behaviors of bulk and ultrathin specimens are noted. Probing and understanding potential structural differences present a challenge but also an opportunity for material and device development, if they can be predicted and controlled. It is clear that careful investigations of structure, layer stacking, and defects in materials, how they may relate to the crystal chemistry, and how they may be different in crystals and mono- or few-layer specimens provide invaluable context for understanding the behavior of van der Waals layered magnetic materials.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Down-regulation of A3AR signaling by IL-6-induced GRK2 activation contributes to Th17 cell differentiation

Highlights: • Cyclic AMP-PKA signaling is involved in Th17 cell differentiation. • IL-6 stimulation triggers the internalization of A{sub 3}AR and promotes cAMP production in T cells. • IL-6 induces A{sub 3}AR internalization in a GRK2 dependent manner. • GRK2 is a potential therapeutic target for treating Th17 driving immune diseases. IL-6-triggered Th17 cell expansion is responsible for the pathogenesis of many immune diseases including rheumatoid arthritis (RA). Traditionally, IL-6 induces Th17 cell differentiation through JAK-STAT3 signaling. In the present work, PKA inhibition reduces in vitro induction of Th17 cells, while IL-6 stimulation of T cells facilitates the internalization of A{sub 3}AR and increased cAMP production in a GRK2 dependent manner. Inhibition of GRK2 by paroxetine (PAR) or genetic depletion of GRK2 restored A{sub 3}AR distribution and prevented Th17 cell differentiation. Furthermore, in vivo PAR treatment effectively reduced the splenic Th17 cell proportion in a rat model of collagen-induced arthritis (CIA) which was accompanied by a significant improvement in clinical manifestations. These results indicate that IL-6-induced Th17 cell differentiation not only occurs through JAK-STAT3-RORγt but is also mediated through GRK2-A{sub 3}AR-cAMP-PKA-CREB/ICER-RORγt. This elucidates the significance of GRK2-controlled cAMP signaling in the differentiation of Th17 cells and its potential application in treating Th17-driven immune diseases such as RA.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2025

DESIGN ISSUES AND QUALIFICATION OF HYDROFORMED DOUBLE WALLED EXPANSION JOINTS IN VACUUM SERVICE

The Vacuum Auxiliary System for ITER is devoted to pumping out, venting, and purging the vacuum volumes of the tokamak. Over 5000 clients including the cryostat and vacuum vessel, at 8500 m3 and 1400 m3 respectively, are serviced by approximately 150 pumping stations through 6 km of pipework. The piping and functions provided to the clients include component operation, routing of potentially tritiated gases, and timely leak localization. Expansion joints are used to reduce loadings on pumps and piping stresses but also to qualify in-line components having low allowable design loads. The ITER project utilizes vacuum valves that are not designed to withstand typical piping system loadings and require detailed design and evaluation. Loading scenarios prescribed by governing system specifications must be considered. To maintain allowable design loads for components and to keep piping stresses below code requirements, double walled hydroformed expansion joints have been employed in the design. These are not standard items and require custom fabrication. Installation space constraints and adjacent pipe support attachment location availability at ITER limit standard expansion joint installation guidelines provided by the Expasion Joint Manufacturers Association (EJMA). Careful consideration must be given to the analysis model to ensure proper function and life expectancy of the component. These considerations include accurate accounting of thrust forces, thermal movements, seismic accelerations, equipment and building differential displacements. In addition to displacements, the process internal, external, and interspace pressures affect the qualification and selection of the double walled expansion joints. The calculation results shall confirm that deflections, forces, and moments are reasonable for the size and type required for the system’s demands as evaluated against the manufacturer’s design.

Clark, Forrest [ORNL] (ORCID:0009000678106843)↗
NASA NTRS1973

Recursive formulas for the partial fraction expansion of a rational function with multiple poles.

The coefficients in the partial fraction expansion considered are given by Heaviside's formula. The evaluation of the coefficients involves the differential of a quotient of two polynomials. A simplified approach for the evaluation of the coefficients is discussed. Leibniz rule is applied and a recurrence formula is derived. A coefficient can also be determined from a system of simultaneous equations. Practical methods for the performance of the computational operations involved in both approaches are considered.

Chang, F.-C.↗
NASA NTRS1977

The relationship between crustal tectonics and internal evolution in the moon and Mercury

The relationship between crustal tectonics and thermal evolution is discussed in terms of the moon and Mercury. Finite strain theory and depth and temperature-dependent thermal expansion are used to evaluate previous conclusions about early lunar history. Factors bringing about core differentiation in the first 0.6 b.y. of Mercurian evolution are described. The influence of concentrating radioactive heat sources located in Mercury's crust on the predicted contraction is outlined. The predicted planetary volume change is explored with regard to quantitative limits on the extent of Mercurian core solidification. Lunar and Mercurian thermal stresses involved in thermal evolution are reviewed, noting the history of surface volcanism. It is concluded that surface faulting and volcanism are closely associated with the thermal evolution of the whole planetary volume. As the planet cools or is heated, several types of tectonic and volcanic effects may be produced by thermal stress occurring in the lithosphere.

Solomon, S. C.↗
NASA NTRS1983

Ganymede and Callisto

It is noted that even though the two moons have very similar masses and densities and formed in the same part of the solar system, Ganymede underwent widespread geologic activity whereas Callisto appears to have remained dormant. It is believed that the reason for this may involve several factors. Callisto has undoubtedly experienced at least some internal differentiation; if, however, the differentiation was less complete than for Ganymede or if it took place more slowly, some expansion could have occurred without the crust ever having been fractured. All the major heat sources in these moons produce more heat in Ganymede than in Callisto. Since Ganymede is more massive and dense than Callisto, its silicate content is significantly higher. Because the major radioactive elements are present only in the silicates, radiogenic heating is greater for Ganymede than for Callisto (by an estimated 60%) Ganymede has also undergone significantly more accretional heating than Callisto, not only because of its greater mass and stronger gravitational attraction, which lead to higher impact velocities, but also because it lies closer to Jupiter. The strong gravitational attraction of Jupiter greatly increases the impact velocities of any debris coming from outside the Jupiter system.

Squyres, S. W.↗
NASA NTRS1991

Crystallization and properties of Sr-Ba aluminosilicate glass-ceramic matrices

Powders of roller quenched (Sr,Ba)O-Al2O3-2SiO2 glasses of various compositions were uniaxially pressed into bars and hot isostatically pressed at 1350 C for 4 hours or cold isostatically pressed and sintered at different temperatures between 800 to 1500 C for 10 or 20 hours. Densities, flexural strengths, and linear thermal expansion were measured for three compositions. The glasss transition and crystallization temperatures were determined by Differential Scanning Calorimetry (DSC). The liquidus and crystallization temperature from the melt were measured using high temperature Differential Thermal Analysis (DTA). Crystalline phases formed on heat treatment of the glasses were identified by powder x ray diffraction. In Sr containing glasses, the monoclinic celsian phase always crystallized at temperatures above 1000 C. At lower temperatures, the hexagonal analog formed. The temperature for orthorhombic to hexagonal structure transformation increased monotonically with SrO content, from 327 C for BaO-Al2O3-2SiO2 to 758 C for SrO-Al2O3-2SiO2. These glass powders can be sintered to almost full densities and monoclinic celsian phase at a relatively low temperature of 1100 C.

Bansal, Narottam P.↗
NASA NTRS1991

A model for the three-dimensional spacecraft control laboratory experiment

A model for the three-dimensional Spacecraft Control Laboratory Experiment (SCOLE) is developed. The objective behind this method of modelling is to utilize the basic partial differential equations of motion for this distributed parameter system and not to use the modal expansion in developing the model. The final model obtained is in terms of a transfer function matrix which relates the flexible mast parameters like displacement, slope, shear stress, etc. to external forces and moments.

Kakad, Yogendra P.↗
NASA NTRS1991

Crystallization and properties of Sr-Ba aluminosilicate glass-ceramic matrices

Powders of roller quenched (Sr,Ba)O-Al2O3-2SiO2 glasses of various compositions were uniaxially pressed into bars and hot isostatically pressed at 1350 C for 4 hours or cold isostatically pressed and sintered at different temperatures between 800 to 1500 C for 10 or 20 hours. Densities, flexural strengths, and linear thermal expansion were measured for three compositions. The glass transition and crystallization temperatures were determined by Differential Scanning Calorimetry (DSC). The liquidus and crystallization temperature from the melt were measured using high temperature Differential Thermal Analysis (DTA). Crystalline phases formed on heat treatment of the glasses were identified by powder X ray diffraction. In Sr containing glasses, the monoclinic celsian phase always crystallized at temperatures above 1000 C. At lower temperatures, the hexagonal analog formed. The temperature for orthorhombic to hexagonal structural transformation increased monotonically with SrO content, from 327 C for BaO-Al2O3-2SiO2 to 758 C for SrO-Al2O3-2SiO2. These glass powders can be sintered to almost full densities and monoclinic celsian phase at a relatively low temperature of 1100 C.

Bansal, Narottam P.↗
DOE OSTI2021

Fourier Neural Networks as Function Approximators and Differential Equation Solvers

We present a Fourier neural network (FNN) that can be mapped directly to the Fourier decomposition. The choice of activation and loss function yields results that replicate a Fourier series expansion closely while preserving a straightforward architecture with a single hidden layer. The simplicity of this network architecture facilitates the integration with any other higher-complexity networks, at a data pre- or postprocessing stage. We validate this FNN on naturally periodic smooth functions and on piecewise continuous periodic functions. We showcase the use of this FNN for modeling or solving partial differential equations with periodic boundary conditions. The main advantages of the current approach are the validity of the solution outside the training region, interpretability of the trained model, and simplicity of use.

Fourier decomposition↗
NASA NTRS1988

Inversion of the Solar Rotation Rate Versus Depth and Latitude

Three differential inversion techniques were used to compute the internal solar rotation rate from several sets of n-averaged frequency splittings. An iterative variation of the spectral expansion method; the optimal averaging kernel method; and a piecewise constant constrained least square method were used to invert the data. Each computation was carried out independently. While they present similar trends, each of the solutions differs in detail. A consistent feature in all the inversions is the disappearance of differential rotation below the base of the convection zone. Also, a strong differential signature in the deeper part of the convection zone is present in most of the solutions. A slow decrease of the rotation rate with depth for the equatorial and midlatitude curves is significant in the spectral expansion and the least square results but only marginally apparent in the averaging kernel results.

Korzennik, Sylvain G.↗
NASA NTRS1988

On the expansion of ionospheric plasma into the near-wake of the Space Shuttle Orbiter

During the Spacelab 2 mission, while the Plasma Diagnostics Package was attached to the Remote Manipulator System, differential ion vector measurements were obtained in the near wake at a distance of 4-5 Shuttle radii. The Orbiter's wake was found to fill in at a much faster rate than can be explained by simple thermal motion. The measurements strongly suggest that filling of the Orbiter's wake is produced by the process of 'collisionless plasma expansion into a vacuum' and that, for oblique angles of the magnetic field and velocity vectors, the near wake plasma depletion a few radii downstream is not sensitive to the body scale size.

Stone, N. H.↗