Search NASA⌕ Search

SEARCH · Search NASA

Results for “dispersive waves”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Quasilinear theory for inhomogeneous plasma

Here, this paper presents quasilinear theory (QLT) for a classical plasma interacting with inhomogeneous turbulence. The particle Hamiltonian is kept general; for example, relativistic, electromagnetic and gravitational effects are subsumed. A Fokker–Planck equation for the dressed ‘oscillation-centre’ distribution is derived from the Klimontovich equation and captures quasilinear diffusion, interaction with the background fields and ponderomotive effects simultaneously. The local diffusion coefficient is manifestly positive-semidefinite. Waves are allowed to be off-shell (i.e. not constrained by a dispersion relation), and a collision integral of the Balescu–Lenard type emerges in a form that is not restricted to any particular Hamiltonian. This operator conserves particles, momentum and energy, and it also satisfies the H -theorem, as usual. As a spin-off, a general expression for the spectrum of microscopic fluctuations is derived. For on-shell waves, which satisfy a quasilinear wave-kinetic equation, the theory conserves the momentum and energy of the wave–plasma system. The action of non-resonant waves is also conserved, unlike in the standard version of QLT. Dewar's oscillation-centre QLT of electrostatic turbulence is proven formally as a particular case and given a concise formulation. Also discussed as examples are relativistic electromagnetic and gravitational interactions, and QLT for gravitational waves is proposed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Turbulence simulations of drift-Alfvén wave effects on edge-localized modes and divertor target heat flux width

A series of BOUT++ turbulence simulations are performed for two Pre-Fusion Power Operation (PFPO-1,2) phases of the ITER Research plan proclaimed in 2019. Linear simulation results show that PFPO-1 is unstable to Peeling-ballooning modes (PB), while the PFPO-2 is unstable to the coupling of PB and Drift-Alfvén wave (DAW) instabilities. The linear results are qualitatively consistent with the dispersion relation of DAW. To study the influence of the DAW on the edge-localized mode (ELM) crash, the PFPO-2 is adopted in this section. Different from the grassy ELM in [Li et al 2022 Nucl. Fusion 62, 096030], nonlinear simulations show that the ELM size of PFPO-2 is almost one-third of the grassy ELM, representing a distinct small ELM. However, simulations then show that if the PB instability is removed, the fluctuation amplitude drops by an order of magnitude and the ELM crash disappears, which is in accord with the theory in [Xu et al 2010 Physical Review Letters, Vol. 105, 175005] and the results in [Li et al 2022 Nucl. Fusion 62, 096030], confirming that the PB instability is a necessary condition for an ELM crash. Furthermore, removing the DAW drive also suppresses ELM crashes, implying that PB instability is necessary but insufficient for PFPO-2 ELM and that DAW could amplify PB-driven turbulence. In addition, by integrating results of both PFPO phases by BOUT++ turbulence analysis with heat flux width (λ q ) and electron thermal diffusivity (χ e ), these simulations establish a predictive framework for heat flux width and its dominant mechanisms, thereby providing a comprehensive scheme for the prediction of the heat flux width. Moreover, simulations indicate that DAW driving can increase the transport coefficient by enhancing the turbulent transport, leading to a broadened heat flux width once the transport coefficient exceeds

Drift-Alfvén wave↗
DOE OSTI2020

Signatures of coupling between spin waves and Dirac fermions in YbMnBi 2

Here, we present inelastic neutron scattering measurements of magnetic excitations in YbMnBi 2 , which reveal features consistent with a direct coupling of magnetic excitations to Dirac fermions. In contrast with the large broadening of magnetic spectra observed in antiferromagnetic metals such as the iron pnictides, here the spin waves exhibit a small but resolvable intrinsic width, consistent with our theoretical analysis. The subtle manifestation of spin-fermion coupling is a consequence of the Dirac nature of the conduction electrons, including the vanishing density of states near the Dirac points. Accounting for the Dirac fermion dispersion specific to YbMnBi 2 leads to particular signatures, such as the nearly wave-vector-independent damping observed in the experiment.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Central vortex steady states and dynamics of Bose–Einstein condensates interacting with a microwave field

Here we study central vortex steady states and dynamics of a two-dimensional (2D), two-component, Gross–Pitaevskii equation (CGPE) system for two pseudo-spinor Bose Einstein condensates (BECs) interacting with an electromagnetic field (microwave) analytically and numerically. For the central vortex steady state at any given winding number S, we prove its existence in a reduced, single component detuning limit when contact-interaction strength β < β b , and nonexistence when β > β b , respectively, where β b is a threshold value, whose value is given in Theorem 3.1 in the paper. We extend the existence and nonexistence result to the general two pseudo-spinor case and prove that a central vortex steady state exists for any given S if β ≤ β b while it does not exist when β > 2β b . We then derive dynamical equations for some observables (expectations of the matter wave function) such as the center-of-mass, position of dispersion, the linear and angular momentum of the two pseudo-spinor CGPEs. Finally, numerical computations are brought in to validate and extend the existence of vortex steady state results to β b ≤ β < 2β b for the two pseudo-spinor case and to explore transient dynamics of the observables.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Assessing the Role of Interfacial and Metal Sites in Pt/TiO2-Catalyzed Acetic Acid Hydrodeoxygenation

Thermochemical conversion of biomass to produce drop-in quality biofuels typically involves hydrodeoxygenation (HDO) steps following catalytic fast pyrolysis (CFP) to remove excess oxygen and create a more-stable bio-oil product. HDO reactions are performed by co-feeding the CFP vapor-phase product and H2 gas over a bi-functional catalyst. Noble-metal catalysts supported on reducible metal oxides (e.g., Pt/TiO2) are active and selective toward these HDO reactions. Griffin and co-workers showed that Pt/TiO2 catalysts promote the desired deoxygenation steps for m-cresol HDO while mitigating undesired C-C bond-breaking steps that reduce the overall value/energy density of the biofuel. Such model-compound studies to inform the design of improved catalysts for HDO chemistry are necessary to improve the overall process economics/efficiencies for biofuels production. One important class of bio-derived compounds that has not been studied extensively with respect to HDO chemistry, particularly at the atomic level, is carboxylic acids. Past experimental work indicates that Pt/C and Pt/TiO2 catalysts are selective toward C-C and C-O bond-dissociation products for acetic acid HDO, respectively. To understand the role of Pt/TiO2 active sites in this observed change in selectivity and guide catalyst development, the work in this presentation focuses on modeling the role of Pt-metal and Pt-TiO2-interfacial sites in promoting key C-C bond-breaking, C-O bond-breaking, and (de)hydrogenation steps in acetic acid HDO. Density functional theory (DFT) calculations were performed using the Vienna Ab initio Simulation Package (VASP). The exchange-correlation functional was approximated by the Perdew-Burke-Ernzerhof functional. Dispersion interactions were captured using the D3 method. Projector augmented-wave potentials described electron-ion interactions, and electron wavefunctions were expanded via a planewave basis with an energy cutoff of 500 eV. Activation barriers were calculated using the climbing image nudged elastic band method. Results and Discussion: To discern the role of Pt-metal and Pt-TiO2 interface sites in promoting acetic acid HDO chemistry, Pt(111) slab and anatase TiO2(101)-supported Pt-nanowire (PtNW/OH-TiO2) surface models were constructed, respectively. Because H2 is co-fed in HDO reactions, the anatase support was terminated with OH groups. Interfacial vacancies have been shown to facilitate Ru/TiO2-catalyzed phenol HDO; thus, an interfacial model with an OH vacancy was also considered (PtNW/OHv-TiO2). Pt-TiO2-interface sites stabilize adsorption of all studied acetic acid HDO surface intermediates relative to terrace Pt-metal sites, particularly when an interfacial-OH vacancy is present. Oxygenated species prefer to bind at the OH vacancy through the O atom, suggesting a preference for C-O over C-C bond cleavage at these sites. This hypothesis is supported by net-negative and net-positive average shifts in the reaction energy and activation energy barriers for C-O and C-C bond-breaking steps, respectively, at Pt-TiO2-interface sites relative to Pt-metal sites. Using the calculated energetics, the predicted minimum-energy pathway was determined for each surface. Pt(111) is predicted to follow decarboxylation, producing undesired methane and carbon dioxide. Conversely, PtNW/OH-TiO2 and PtNW/OHv-TiO2 are both predicted to produce desired acetaldehyde and ethane. The interfacial vacancy may also play a key role in facilitating the first C-O bond-breaking step in acetic acid HDO, lowering the barrier by 0.6 eV relative to the defect-free interface model. These results demonstrate the critical role of the Pt-TiO2 interface in the shift in acetic acid HDO selectivity experimentally observed on Pt/C and Pt/TiO2 catalysts. The results herein demonstrate the important role of the Pt-TiO2 interface and interfacial oxygen vacancies in improving the carbon efficiency for HDO reactions in CFP upgrading.

BIOMASS FUELS,INORGANIC, ORGANIC, PHYSICAL, AND AN↗
DOE OSTI2021

Universal spin wave damping in magnetic Weyl semimetals

We analyze the decay of spin waves into Stoner excitations in magnetic Weyl semimetals. The lifetime of a mode is found to have a universal dependence on its frequency and momentum, and on a few parameters that characterize the relativistic Weyl spectrum. At the same time, uniform Gilbert damping by Weyl electrons is absent. Here, the decay rate of spin waves is calculated perturbatively using the s-d model of itinerant Weyl or Dirac electrons coupled to local moments. We show that many details of the Weyl spectrum, such as the momentum-space locations, dispersions, and sizes of the Weyl Fermi pockets, can be deduced indirectly by probing the spin waves of local moments using inelastic neutron scattering.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Interaction of radio frequency waves with cylindrical density filaments: scattering and radiation pressure

The propagation of radio-frequency (RF) waves in tokamaks can be affected by filamentary structures, or blobs, that are present in the edge plasma and the scrape-off layer. The difference in the permittivity between the surrounding plasma and interior of a filament leads to reflection, refraction and diffraction of the waves. This, in turn, can affect the power flow into the core of the plasma and reduce the efficiency of heating and/or current generation. The scattering of RF waves, lower hybrid, helicon and ion cyclotron waves, by a single cylindrical filament, embedded in a background plasma, is studied using a full-wave analytical theory developed previously (Ram & Hizanidis, Phys. Plasmas , vol. 23, 2016, 022504). The theory assumes that the plasma in and around a filament is homogeneous and cold. A detailed scattering analysis reveals a variety of common features that exist among the three distinctly different RF waves. These common attributes can be inferred intuitively based on an examination of the cold plasma dispersion relation. The physical intuition is a useful step to understanding experimental observations on scattering, as well as results from simulations that include general forms of edge plasma turbulence. While a filament can affect the propagation of RF waves, the radiation force exerted by the waves can influence the filament. The force on a filament is determined using the Maxwell stress tensor. In 1905, Poynting was the first to evaluate and measure the radiation force on an interface separating two different dielectric media (Poynting, London Edinburgh Dublin Philos. Mag. J. Sci. , vol. 9, 1905, pp. 393–406). For ordinary light propagating in vacuum and incident on a glass surface, Poynting noted that the surface is ‘pulled’ towards the vacuum. In a magnetized cold plasma, there are two independent wave modes. Even if only one of these modes is excited by an RF antenna, a filament will couple power to the other mode: a consequence of electromagnetic boundary conditions. This facet of scattering has consequences on the radiation force that go beyond Poynting's seminal contribution. The direction of the force depends on the polarization of the incident wave and on the mode structure of the waves inside and in the vicinity of a filament. It can either pull the filament toward the RF source or push it away. For slow lower hybrid waves, filaments with densities greater than the ambient density are pulled in, while filaments with lower densities are pushed out, thereby enhancing the density in front of the antenna. In the case of fast helicon and ion cyclotron waves, the direction of the force depends on the plasma and wave parameters; in particular, on the ambient density. The radiation force, in all three frequency ranges, is large enough to affect the motion of a filament and could be measured experimentally. This also suggests the possibility of modifying the edge turbulence using RF waves.

Physics↗
DOE OSTI2022

Interaction of radio frequency waves with cylindrical density filaments -- scattering and radiation pressure

The propagation of radio-frequency (RF) waves in tokamaks can be affected by filamentary structures, or blobs, that are present in the edge plasma and the scrape-off layer. The difference in the permittivity between the surrounding plasma and interior of a filament leads to reflection, refraction and diffraction of the waves. This, in turn, can affect the power flow into the core of the plasma and reduce the efficiency of heating and/or current generation. The scattering of RF waves, lower hybrid, helicon and ion cyclotron waves, by a single cylindrical filament, embedded in a background plasma, is studied using a full-wave analytical theory developed previously (Ram & Hizanidis, Phys. Plasmas, vol. 23, 2016, 022504). The theory assumes that the plasma in and around a filament is homogeneous and cold. A detailed scattering analysis reveals a variety of common features that exist among the three distinctly different RF waves. These common attributes can be inferred intuitively based on an examination of the cold plasma dispersion relation. The physical intuition is a useful step to understanding experimental observations on scattering, as well as results from simulations that include general forms of edge plasma turbulence. While a filament can affect the propagation of RF waves, the radiation force exerted by the waves can influence the filament. The force on a filament is determined using the Maxwell stress tensor. In 1905, Poynting was the first to evaluate and measure the radiation force on an interface separating two different dielectric media (Poynting, London Edinburgh Dublin Philos. Mag. J. Sci., vol. 9, 1905, pp. 393–406). For ordinary light propagating in vacuum and incident on a glass surface, Poynting noted that the surface is ‘pulled’ towards the vacuum. In a magnetized cold plasma, there are two independent wave modes. Even if only one of these modes is excited by an RF antenna, a filament will couple power to the other mode: a consequence of electromagnetic boundary conditions. This facet of scattering has consequences on the radiation force that go beyond Poynting's seminal contribution. The direction of the force depends on the polarization of the incident wave and on the mode structure of the waves inside and in the vicinity of a filament. It can either pull the filament toward the RF source or push it away. For slow lower hybrid waves, filaments with densities greater than the ambient density are pulled in, while filaments with lower densities are pushed out, thereby enhancing the density in front of the antenna. In the case of fast helicon and ion cyclotron waves, the direction of the force depends on the plasma and wave parameters; in particular, on the ambient density. The radiation force, in all three frequency ranges, is large enough to affect the motion of a filament and could be measured experimentally. This also suggests the possibility of modifying the edge turbulence using RF waves.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Verification of a fully kinetic ion model for electromagnetic simulations of high-frequency waves in toroidal geometry

For the research of high-frequency electromagnetic waves in tokamaks, an electromagnetic simulation model, in which the ion dynamics is described by a six-dimensional Vlasov equation and the electron dynamics is described by a drift kinetic equation, is formulated and implemented in the global gyrokinetic toroidal code (GTC). Analytic dispersion relations are derived in reduced systems and compared with various theories to verify the model. Linear simulations of a generalized ion Bernstein wave and ion cyclotron emission are verified by comparing the GTC simulation results with analytic dispersion relation theory and magnetoacoustic cyclotron instability theory, respectively, in cylindrical geometry.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

An implementation of a high-order generalized finite difference method for solving the time-harmonic cold plasma wave equation in toroidal geometry

A high-order physics-informed meshless finite difference numerical technique is introduced for solving the time-harmonic cold plasma wave equation in toroidal geometries, presenting a novel application of the generalized finite difference (GFD) method to plasma wave simulations. The algorithm employs an irregular distribution of computational points, with local point density informed by the shortest wavelength derived from the cold plasma dispersion relation. Numerical stability and robustness are addressed using regularization techniques. The algorithm, implemented for two spatial dimensions, solves for the wave electric field and is demonstrated to achieve convergence rates of $\mathcal{O}$($\mathcal{h}$ $\mathcal{P}$ )⁠. Verification tests reproduce plane wave solutions, and example simulations of ion cyclotron resonance heating and electron cyclotron resonance heating demonstrate its capability, approaching realistic tokamak plasma scenarios. This work contributes to laying a foundation for the GFD method to be used in more sophisticated, optimized, and physically realistic full-wave simulations in time-harmonic plasma wave research.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Spin Wave Excitations in Honeycomb Antiferromagnet MnTiO 3

Using inelastic neutron scattering, we investigate the spin wave excitations on the antiferromagnetic MnTiO 3 (T N = 65 K), which has the stacked honeycomb structure. At T = 2 K, the spin wave energy extends up to 10.7 meV with the zone-center anisotropy gap of 0.8 meV. Whereas the dispersion is also strong along the direction perpendicular to the honeycomb planes, the exchange cancellation causes the magnetic interactions to be effectively anisotropic below TN. Furthermore, while the spin wave spectrum survives at temperatures above TN, we find that the magnetic interactions become more anisotropic within the paramagnetic phase. These results suggest that the magnetic interaction in MnTiO 3 crosses over from being three dimensional to two dimensional above T N .

36 MATERIALS SCIENCE↗
DOE OSTI2022

Urbanization Impact on Regional Climate and Extreme Weather: Current Understanding, Uncertainties, and Future Research Directions

Abstract Urban environments lie at the confluence of social, cultural, and economic activities and have unique biophysical characteristics due to continued infrastructure development that generally replaces natural landscapes with built-up structures. The vast majority of studies on urban perturbation of local weather and climate have been centered on the urban heat island (UHI) effect, referring to the higher temperature in cities compared to their natural surroundings. Besides the UHI effect and heat waves, urbanization also impacts atmospheric moisture, wind, boundary layer structure, cloud formation, dispersion of air pollutants, precipitation, and storms. In this review article, we first introduce the datasets and methods used in studying urban areas and their impacts through both observation and modeling and then summarize the scientific insights on the impact of urbanization on various aspects of regional climate and extreme weather based on more than 500 studies. We also highlight the major research gaps and challenges in our understanding of the impacts of urbanization and provide our perspective and recommendations for future research priorities and directions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Comparative analysis of plasmon modes in layered Lindhard metals and strange metals

The enigmatic strange metal remains one of the central unsolved problems of 21st century science. Understanding this phase of matter requires knowledge of the momentum- and energy-resolved dynamic charge susceptibility 𝜒⁡(𝑞,𝜔), especially at finite momentum. Inelastic electron scattering (EELS), performed in either transmission or reflection geometry, is a powerful probe of 𝜒⁡(𝑞,𝜔). For the prototypical strange metal Bi 2 ⁢Sr 2 ⁢CaCu 2 ⁢O 8+𝑥 , transmission- and reflection EELS, and infrared (IR) spectroscopy agree at 𝑞∼0, all revealing a highly damped plasmon near 1 eV. At larger 𝑞, however, EELS results show unresolved discrepancies. Since IR data are highly reproducible, it is advantageous to use IR data to calculate what the expected EELS response should be at modest 𝑞. Building on prior momentum-resolved reflection geometry M-EELS work [Chen et al., Phys. Rev. B 109, 045108 (2024)], we extend this approach to transmission EELS for finite stacks of metallic layers, comparing a “textbook” Lindhard metal to a strange metal. In the Lindhard case, the low-𝑞 response is dominated by long-lived, standing wave plasmon modes arising from interlayer Coulomb coupling, with in-plane dispersions that resemble the well-known Fetter modes of layered metals. This behavior depends only on the geometry and the long-range nature of the Coulomb interaction and is largely insensitive to layer details. At larger 𝑞, the response reflects the microscopic properties of individual layers. For the strange metal, calculations based on IR data predict a highly damped plasmon with weak dispersion and no distinct surface mode. While our results match IR and M-EELS at low 𝑞, they do not reproduce any published EELS spectra at large 𝑞, highlighting unresolved discrepancies that demand further experimental investigation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Nonperturbative aspects of the electromagnetic pion form factor at high energies

The structure of hadronic form factors at high energies and their deviations from perturbative quantum chromodynamics provide insight on nonperturbative dynamics. Using an approach that is consistent with dispersion relations, we construct a model that simultaneously accounts for the pion wave function, gluonic exchanges, and quark Reggeization. In particular, we find that quark Reggeization can be investigated at high energies by studying scaling violation of the form factor.

Form factors↗
DOE OSTI2025

Side-by-side evaluation of the outgassing rate and ultimate pressure achieved inside tubes made of low-carbon and stainless steel

The hydrogen outgassing rate of a vacuum chamber made of AISI 1020 low-carbon steel was found to be notably smaller than a similar chamber made of AISI 316L stainless steel following heat treatment at 150 °C. When the chambers were baked at 400 °C, the outgassing rate of the 1020 low-carbon steel chamber was approximately 2000 times smaller than that of the 316L stainless-steel chamber. After quantifying hydrogen outgassing rates, vacuum chambers made of 1020 low-carbon steel and 316L stainless steel were heated for a prescribed duration and then pumped with an ion pump and nonevaporable getter pump to reach “ultimate pressure.” The 1020 low-carbon steel chamber reached lower pressures than the 316L stainless-steel chamber. Monte Carlo simulation predictions using the measured hydrogen outgassing rates are in good agreement with the ultimate pressure measurements. Finally, our measurements indicate that low-carbon steel can provide pressures within the extreme high vacuum range (<7.5 × 10 -13 Torr) if care is taken to minimize the surface area contribution from stainless steel.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Topology optimization of 3D photonic crystals with complete bandgaps

The design of photonic crystals with complete bandgaps has recently received considerable research focus for numerous reasons. This work leverages well-known nonlinear programming techniques to alleviate the non-smoothness caused by degenerate eigenvalues such that topology optimization problems can be solved with the open-source IPOPT software. A fully-vectorial plane wave expansion technique is used with an iterative eigensolver to efficiently predict dispersion properties of candidate structures. Nonlinear programming is employed to solve the inverse problem of designing three-dimensional periodic structures that exhibit complete two-dimensional (2D) and three-dimensional (3D) photonic bandgaps. Mesh refinement is performed to alleviate the large computational burden of designing and analyzing photonic crystals, and a periodic density filter is implemented to impose a minimum feature size for manufacturability considerations.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Electron Density Measurements Using USPR (Final Scientific/Technical Report)

UC Davis has fabricated an ultrashort pulse reflectometer (USPR) diagnostic instrument for electron density profile measurements on compact, short duration, magnetically-confined fusion-energy concept devices such as spheromaks and FRCs. The USPR system transmits extremely short duration (~few nsec) chirped waveforms that together span 29 to 75 GHz. These chirped waveforms illuminate and reflect from the target plasma, with each frequency component reflecting from a different density layer (higher frequencies probe deeper into the plasma before reflecting). The reflected waveforms are split into roughly 42 different frequencies; time-of-flight (TOF) measurements made at each frequency with high resolution (~25 psec measurement resolution which corresponds to ~5 mm). These TOF data may then be inverted via software to generate electron density profiles with high time resolution (~10 μsec). At the heart of the system is a field programmable gate array (FPGA) based controller which collects and processes all of the USPR data in addition to generating all of the control signals required for maximum flexibility. The FPGA controller has the software flexibility to be easily reconfigured for different plasma devices, and the entire system sufficiently compact to be easily and quickly transported between devices. A high speed impulse generator was transformed into a set of three ultrashort pulse transmitter chirps using a combination of dispersive waveguide, frequency doublers and high-pass filters. A mm-wave controller was fabricated to sequentially switch between the three chirps, directing the chirps one-by-one to three different mm-wave assemblies spanning 29-75 GHz. Each mm-wave assembly consists of a high power active multiplier chain which converts the transmitter chirp to higher frequencies, and a broadband mixer which downconverts the reflected waveform to the 2-18 GHz range of the UPSR receiver. The 16-channel receiver (shared by all 3 mm-wave assemblies) was fabricated employing custom TOF modules capable of operating at a high 1 MHz sampling rate. Laboratory testing of the full system revealed the presence of unwanted harmonics from the multiplication process, with interference observed in the downconverted reflections at selected frequency channels that could not be completely filtered out. Additional interference effects arising from internal reflections within the mm-wave assemblies were minimized using a high-speed switch which served to “gate out” much of these reflections. The USPR diagnostic was transported and installed onto the HIT-SIU plasma device, becoming operational on 11/08/2022. Although designed to span 3 distinct mm-wave bands, the HIT-SIU plasmas at this time were sufficiently low density such that only the lowest of the three bands was likely to have strong plasma reflections. The system was then set to operate on only the lowest band (assembly #1), with data collected every 1 μsec rather than 3 μsec which would have been the case when cycling through all three bands. Connected to HIT-SIU, time-varying plasma reflections were observed on 9 of 16 possible frequency channels. Close examination of the data collected revealed issues previously unobserved in laboratory testing, associated with (a) reflections from the small aperture horns required for operation within the HIT-SIU device, and (b) a dependence of the recorded TOF with the threshold voltage of a given channel. Plans were made to address each of these issues before undertaking any future campaigns.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Quasi-particle interference of the van Hove singularity in Sr2RuO4

Abstract The single-layered ruthenate Sr 2 RuO 4 is one of the most enigmatic unconventional superconductors. While for many years it was thought to be the best candidate for a chiral p -wave superconducting ground state, desirable for topological quantum computations, recent experiments suggest a singlet state, ruling out the original p -wave scenario. The superconductivity as well as the properties of the multi-layered compounds of the ruthenate perovskites are strongly influenced by a van Hove singularity in proximity of the Fermi energy. Tiny structural distortions move the van Hove singularity across the Fermi energy with dramatic consequences for the physical properties. Here, we determine the electronic structure of the van Hove singularity in the surface layer of Sr 2 RuO 4 by quasi-particle interference imaging. We trace its dispersion and demonstrate from a model calculation accounting for the full vacuum overlap of the wave functions that its detection is facilitated through the octahedral rotations in the surface layer.

36 MATERIALS SCIENCE↗