Search NASA⌕ Search

SEARCH · Search NASA

Results for “distribution selection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Liquid flow and distribution in unsaturated porous media

Flow and transport in permeable or porous media and microchannels occurs in a variety of situations in micro- and reduced-gravity environments, many of them associated with environmental control and life support systems. While the role of gravity is limited, due to the typically small size scales associated permeable media, gravity, at the very least, affects the overall disposition of fluid in a macroscopic system. This presentation will discuss examples where the absence of gravity affects flow and phase distribution in selected examples of unsaturated flow and transport of heat and mass in porous media and microchannels that are pertinent to spacecraft systems.

Alexander, J. Iwan↗

Convective Weather Forecast Quality Metrics for Air Traffic Management Decision-Making

Since numerical weather prediction models are unable to accurately forecast the severity and the location of the storm cells several hours into the future when compared with observation data, there has been a growing interest in probabilistic description of convective weather. The classical approach for generating uncertainty bounds consists of integrating the state equations and covariance propagation equations forward in time. This step is readily recognized as the process update step of the Kalman Filter algorithm. The second well known method, known as the Monte Carlo method, consists of generating output samples by driving the forecast algorithm with input samples selected from distributions. The statistical properties of the distributions of the output samples are then used for defining the uncertainty bounds of the output variables. This method is computationally expensive for a complex model compared to the covariance propagation method. The main advantage of the Monte Carlo method is that a complex non-linear model can be easily handled. Recently, a few different methods for probabilistic forecasting have appeared in the literature. A method for computing probability of convection in a region using forecast data is described in Ref. 5. Probability at a grid location is computed as the fraction of grid points, within a box of specified dimensions around the grid location, with forecast convection precipitation exceeding a specified threshold. The main limitation of this method is that the results are dependent on the chosen dimensions of the box. The examples presented Ref. 5 show that this process is equivalent to low-pass filtering of the forecast data with a finite support spatial filter. References 6 and 7 describe the technique for computing percentage coverage within a 92 x 92 square-kilometer box and assigning the value to the center 4 x 4 square-kilometer box. This technique is same as that described in Ref. 5. Characterizing the forecast, following the process described in Refs. 5 through 7, in terms of percentage coverage or confidence level is notionally sound compared to characterizing in terms of probabilities because the probability of the forecast being correct can only be determined using actual observations. References 5 through 7 only use the forecast data and not the observations. The method for computing the probability of detection, false alarm ratio and several forecast quality metrics (Skill Scores) using both the forecast and observation data are given in Ref. 2. This paper extends the statistical verification method in Ref. 2 to determine co-occurrence probabilities. The method consists of computing the probability that a severe weather cell (grid location) is detected in the observation data in the neighborhood of the severe weather cell in the forecast data. Probabilities of occurrence at the grid location and in its neighborhood with higher severity, and with lower severity in the observation data compared to that in the forecast data are examined. The method proposed in Refs. 5 through 7 is used for computing the probability that a certain number of cells in the neighborhood of severe weather cells in the forecast data are seen as severe weather cells in the observation data. Finally, the probability of existence of gaps in the observation data in the neighborhood of severe weather cells in forecast data is computed. Gaps are defined as openings between severe weather cells through which an aircraft can safely fly to its intended destination. The rest of the paper is organized as follows. Section II summarizes the statistical verification method described in Ref. 2. The extension of this method for computing the co-occurrence probabilities in discussed in Section HI. Numerical examples using NCWF forecast data and NCWD observation data are presented in Section III to elucidate the characteristics of the co-occurrence probabilities. This section also discusses the procedure for computing throbabilities that the severity of convection in the observation data will be higher or lower in the neighborhood of grid locations compared to that indicated at the grid locations in the forecast data. The probability of coverage of neighborhood grid cells is also described via examples in this section. Section IV discusses the gap detection algorithm and presents a numerical example to illustrate the method. The locations of the detected gaps in the observation data are used along with the locations of convective weather cells in the forecast data to determine the probability of existence of gaps in the neighborhood of these cells. Finally, the paper is concluded in Section V.

Chatterji, Gano B.↗

Nanostructures Exploit Hybrid-Polariton Resonances

Nanostructured devices that exploit the hybrid-polariton resonances arising from coupling among photons, phonons, and plasmons are subjects of research directed toward the development of infrared-spectroscopic sensors for measuring extremely small quantities of molecules of interest. The spectroscopic techniques in question are surface enhanced Raman scattering (SERS) and surface enhanced infrared absorption (SEIRA). An important intermediate goal of this research is to increase the sensitivity achievable by these techniques. The basic idea of the approach being followed in this research is to engineer nanostructured devices and thereby engineer their hybrid-polariton resonances to concentrate infrared radiation incident upon their surfaces in such a manner as to increase the absorption of the radiation for SEIRA and measure the frequency shifts of surface vibrational modes. The underlying hybrid-polariton-resonance concept is best described by reference to experimental devices that have been built and tested to demonstrate the concept. The nanostructure of each such device includes a matrix of silicon carbide particles of approximately 1 micron in diameter that are supported on a potassium bromide (KBr) or poly(tetrafluoroethylene) [PTFE] window. These grains are sputter-coated with gold grains of 40-nm size (see figure). From the perspective of classical electrodynamics, in this nanostructure, that includes a particulate or otherwise rough surface, the electric-field portion of an incident electromagnetic field becomes concentrated on the particles when optical resonance conditions are met. Going beyond the perspective of classical electrodynamics, it can be seen that when the resonance frequencies of surface phonons and surface plasmons overlap, the coupling of the resonances gives rise to an enhanced radiation-absorption or -scattering mechanism. The sizes, shapes, and aggregation of the particles determine the frequencies of the resonances. Hence, the task of designing a nanostructure to exhibit the desired radiation-absorption properties translates, in large part, to selecting particle sizes and shapes to obtain the desired enhanced coupling of energy from photons to plasmons and phonons. To broaden the spectral region(s) of enhanced absorption, one would select a distribution of particle sizes and shapes.

Anderson, Mark↗

A Methodology for Quantifying Certain Design Requirements During the Design Phase

A methodology for developing and balancing quantitative design requirements for safety, reliability, and maintainability has been proposed. Conceived as the basis of a more rational approach to the design of spacecraft, the methodology would also be applicable to the design of automobiles, washing machines, television receivers, or almost any other commercial product. Heretofore, it has been common practice to start by determining the requirements for reliability of elements of a spacecraft or other system to ensure a given design life for the system. Next, safety requirements are determined by assessing the total reliability of the system and adding redundant components and subsystems necessary to attain safety goals. As thus described, common practice leaves the maintainability burden to fall to chance; therefore, there is no control of recurring costs or of the responsiveness of the system. The means that have been used in assessing maintainability have been oriented toward determining the logistical sparing of components so that the components are available when needed. The process established for developing and balancing quantitative requirements for safety (S), reliability (R), and maintainability (M) derives and integrates NASA s top-level safety requirements and the controls needed to obtain program key objectives for safety and recurring cost (see figure). Being quantitative, the process conveniently uses common mathematical models. Even though the process is shown as being worked from the top down, it can also be worked from the bottom up. This process uses three math models: (1) the binomial distribution (greaterthan- or-equal-to case), (2) reliability for a series system, and (3) the Poisson distribution (less-than-or-equal-to case). The zero-fail case for the binomial distribution approximates the commonly known exponential distribution or "constant failure rate" distribution. Either model can be used. The binomial distribution was selected for modeling flexibility because it conveniently addresses both the zero-fail and failure cases. The failure case is typically used for unmanned spacecraft as with missiles.

Adams, Timothy↗

Orbital Debris Radar Measurements from the Haystack Ultra-Wideband Satellite Imaging Radar (HUSIR): 2014-2017

For many years, the NASA Orbital Debris Program Office (ODPO) has partnered with the U.S. Department of Defense and the Massachusetts Institute of Technology Lincoln Laboratory (MIT/LL) to collect data on the orbital debris environment using the Haystack radar. These measurements are used to characterize the small debris environment in low Earth orbit (LEO), down to a noise-limited size of approximately 5 mm—depending on altitude. The Haystack radar operated by MIT Lincoln Lab underwent upgrades starting in May 2010, with operations resuming in 2014 as the Haystack Ultra-wideband Satellite Imaging Radar (HUSIR). Hence, the data collected beginning in 2014 represents the first dataset available from this upgraded sensor. HUSIR is the primary source of data used by the ODPO to statistically sample orbital debris in the 5-mm to 10-cm size regime in LEO and is a key source of data to build and validate the NASA Orbital Debris Engineering Model. In this paper, we will present recent results from measurements performed during the US Government fiscal years 2014 – 2017. Using the NASA Size Estimation Model, a method based on laboratory radar measurements of debris, we will compare the size distributions of selected orbital debris populations over this 4-year period and flux measurements of orbital debris greater than 1 cm.

Murray, James↗

Polarimetric sensitivity of light-absorbing carbonaceous aerosols over ocean: A theoretical assessment

Visible-light-absorbing carbonaceous aerosols within the boundary layer affect the radiance and polarization states of the radiation at the top of the atmosphere. Remote sensing from suborbital and satellite-based platforms utilizes these radiance and polarization signals to retrieve the key properties of these aerosols. Recent retrieval algorithms have shown a progressive trend toward including multi-angular and multi-spectral polarimetric measurements to produce better retrieval accuracy in comparison to those using measurements based on a single viewing angle. Here, we perform a theoretical investigation of the top of atmosphere (TOA) radiance-related reflectance factor (bidirectional reflectance factor (BRF)) and the two types of polarimetry-related factors (polarized bidirectional reflectance factor (pBRF) and the degree of linear polarization (DoLP)) for different types of atmospheric light-absorbing carbonaceous aerosols as a function of particle size distribution. We selected three polarimetric bands corresponding to those utilized by NASA's Airborne Multiangle SpectroPolarimetric Imager (AirMSPI)—near-UV (470 nm), visible (660 nm), and near-infrared (865 nm)—for our simulations which were performed over ocean surface using the successive order of scattering (SOS) algorithm coupled to a Lorenz-Mie aerosol optics model. The analysis of particle phase matrix elements indicates a close relationship between the angular dependencies of DoLP and associated phase matrix components at the shortest polarimetric band (470 nm). Using Jacobian analysis, we find that the radiance- and polarimetry-related reflectance factors of weakly light-absorbing aerosols, such as brown carbon, are more sensitive to changes in particle size and imaginary refractive index in comparison with those of black carbon, which is strongly light-absorbing. Our results suggest that the DoLP data could be used by future retrieval algorithms for reliably estimating microphysical properties of absorbing carbonaceous aerosols with imaginary refractive index less than 0.4.

refractive index↗

Advances in Automation of Overset Structured Volume Mesh Generation and Domain Connectivity

Automation of overset structured surface mesh generation has recently been accomplished by the creation of face, edge, and node meshes based on Boundary Representation solids as the geometry input. The current work continues the automation effort in overset volume mesh generation and domain connectivity based on the auto-generated surface meshes. All near-body curvilinear volume meshes are automatically generated using hyperbolic methods. Automation of this step is enabled by appropriate surface grid point distribution, and selection of boundary-splay and smoothing parameters based on concave and convex surface features. The off-body domain is covered by two automatically generated grid systems. The first contains a single Cartesian mesh with a uniform core enclosing all near-body volume meshes and stretched layers that extend to the far field, while the second consists of a set of small stretched Cartesian grids covering pockets of off-body orphan points. With high quality mesh overlap mostly guaranteed by the surface meshing scheme, orphan points that need to be covered by the second Cartesian mesh system are located away from the fine grid spacing region near the wall. Using line-segment and ray-pierce tests against the surface grids, hole-cutting is accomplished on both near and off-body volume grids resulting in appropriate clearances from the wall. The complete mesh generation automation process is demonstrated on five test cases where flow solutions are also computed and compared with solutions obtained using other methods.

TTT↗

Post-irradiation Examination and Fission Product Inventory Analysis of AGR-1 Irradiation Capsules

The AGR-1 experiment was the first in a series of Advanced Gas Reactor (AGR) experiments designed to test TRISO fuel under High Temperature Gas Reactor irradiation conditions. This experiment was irradiated in the Advanced Test Reactor (ATR) at Idaho National Laboratory (INL) and is currently undergoing post-irradiation examination (PIE) at INL’s Materials and Fuels Complex (MFC). The inventory and distribution of fission products, especially Ag-110m, was assessed and analyzed for all the components of the AGR-1 capsules. This data should help inform the study of fission product migration in coated particle fuel. Gamma spectrometry was used to measure the activity of various different fission products in the different components of the AGR-1 test train. Each capsule contained: 12 fuel compacts, a graphite holder that kept the fuel compacts in place, graphite spacers that were above and below the graphite holders and fuel compacts, gas lines through which a helium neon gas mixture flowed in and out of each capsule, and the stainless steel shell that contained the experiment. Gamma spectrometry results and the experimental techniques used to capture these results will be presented for all the capsule components. The components were assayed to determine the total activity of different fission products present in or on them. These totals are compared to the total expected activity of a particular fission product in the capsule based on predictions from physics simulation. Based on this metric, a significant fraction of the Ag-110m was detected outside the fuel compacts, but the amount varied highly between the 6 capsules. Very small fractions of Cs-137 (<2E-5), Cs-134 (<1e-5), and Eu-154 (<4e-4) were detected outside of the fuel compacts. Additionally, the distribution of select fission products in some of the components including the fuel compacts and the graphite holders were measured and will be discussed.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Small Gas Bubble Experiment for Mitigation of Cavitation Damage and Pressure Waves in Short-pulse Mercury Spallation Targets

Populations of small helium gas bubbles were introduced into a flowing mercury experiment test loop to evaluate mitigation of beam-pulse induced cavitation damage and pressure waves. The test loop was developed and thoroughly tested at the Spallation Neutron Source (SNS) prior to irradiations at the Los Alamos Neutron Science Center - Weapons Neutron Research Center (LANSCE-WNR) facility. Twelve candidate bubblers were evaluated over a range of mercury flow and gas injection rates by use of a novel optical measurement technique that accurately assessed the generated bubble size distributions. Final selection for irradiation testing included two variations of a swirl bubbler provided by Japan Proton Accelerator Research Complex (J-PARC) collaborators and one orifice bubbler developed at SNS. Bubble populations of interest consisted of sizes up to 150 m in radius with achieved gas void fractions in the 10^-5 to 10^-4 range. The nominal WNR beam pulse used for the experiment created energy deposition in the mercury comparable to SNS pulses operating at 2.5 MW. Nineteen test conditions were completed each with 100 pulses, including variations on mercury flow, gas injection and protons per pulse. The principal measure of cavitation damage mitigation was surface damage assessment on test specimens that were manually replaced for each test condition. Damage assessment was done after radiation decay and decontamination by optical and laser profiling microscopy with damaged area fraction and maximum pit depth being the more valued results. Damage was reduced by flow alone; the best mitigation from bubble injection was between half and a quarter that of flow alone. Other data collected included surface motion tracking by three laser Doppler vibrometers (LDV), loop wall dynamic strain, beam diagnostics for charge and beam profile assessment, embedded hydrophones and pressure sensors, and sound measurement by a suite of conventional and contact microphones.

bubbles↗

Daymet: Gridded subdaily weather data for North America

A core requirement for many ecosystem modeling approaches is surface weather fields, including temperature, precipitation, humidity, and incident solar radiation. Carbon dynamics and flux estimates from process models depend strongly on daily and subdaily weather conditions. One common obstacle to model implementation over continental scale regions is the difficulty of obtaining the relevant surface weather observations from in situ networks, and producing spatially interpolated (gridded) surfaces of the necessary weather fields at the appropriate spatial and temporal resolution. One approach that has been developed to overcome this obstacle is Daymet, a numerical method for producing gridded surfaces of subdaily temperature (daily maximum and minimum temperature), and daily precipitation, humidity, and radiation over large regions of complex terrain, using daily surface weather observations and an accurate elevation grid as input. We are providing a high-quality gridded surface weather product over North America for input to NACP process modeling studies by expanding on the conterminous U.S. Daymet domain to include Canada (south of 52N) and Mexico. Download Daymet Data: http://daac.ornl.gov/cgi-bin/dsviewer.pl?ds_id=1219. Input data requirements for the conterminous US, Mexico, and Canada for 1980 - 2008 have been used to produce the Daymet product for these areas; the data will be released in Fall 2010. MAST-DC is developing several ways to select and distribute the Daymet data: ftp download, single-pixel extraction, and access through THREDDS (Thematic Real-time Environmental Distributed Data Services) Data Server (TDS). Periodic updates to the continental data set will be implemented as new years of surface observations become available.

Thornton, Michele M↗

Development of a Thermodynamic Model for the Hanford Tank Waste Operations Simulator - 12193

The Hanford Tank Waste Operations Simulator (HTWOS) is the current tool used by the Hanford Tank Operations Contractor for system planning and assessment of different operational strategies. Activities such as waste retrievals in the Hanford tank farms and washing and leaching of waste in the Waste Treatment and Immobilization Plant (WTP) are currently modeled in HTWOS. To predict phase compositions during these activities, HTWOS currently uses simple wash and leach factors that were developed many years ago. To improve these predictions, a rigorous thermodynamic framework has been developed based on the multi-component Pitzer ion interaction model for use with several important chemical species in Hanford tank waste. These chemical species are those with the greatest impact on high-level waste glass production in the WTP and whose solubility depends on the processing conditions. Starting with Pitzer parameter coefficients and species chemical potential coefficients collated from open literature sources, reconciliation with published experimental data led to a self-consistent set of coefficients known as the HTWOS Pitzer database. Using Gibbs energy minimization with the Pitzer ion interaction equations in Microsoft Excel,1 a number of successful predictions were made for the solubility of simple mixtures of the chosen species. Currently, this thermodynamic framework is being programmed into HTWOS as the mechanism for determining the solid-liquid phase distributions for the chosen species, replacing their simple wash and leach factors. Starting from a variety of open literature sources, a collection of Pitzer parameters and species chemical potentials, as functions of temperature, was tested for consistency and accuracy by comparison with available experimental thermodynamic data (e.g., osmotic coefficients and solubility). Reconciliation of the initial set of parameter coefficients with the experimental data led to the development of the self-consistent set known as the HTWOS Pitzer database. Using Microsoft Excel to formulate the Gibbs energy minimization method and the multi-component Pitzer ion interaction equations, several predictions of the solubility of solute mixtures at various temperatures were made using the HTWOS Pitzer database coefficients. Examples of these predictions are shown in Figure 3 and Figure 4. A listing of the entire HTWOS Pitzer database can be found in RPP-RPT-50703. Currently, work is underway to install the Pitzer ion interaction model in HTWOS as the mechanism for determining the solid-liquid phase distributions of select waste constituents during tank retrievals and subsequent washing and leaching of the waste. Validation of the Pitzer ion interaction model in HTWOS will be performed with analytical laboratory data of actual tank waste. This change in HTWOS is expected to elicit shifts in mission criteria, such as mission end date and quantity of high-level waste glass produced by WTP, as predicted by HTWOS. These improvements to the speciation calculations in HTWOS, however, will establish a better planning basis and facilitate more effective and efficient future operations of the WTP. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

A COMPREHENSIVE ANALYSIS OF FERMI GAMMA-RAY BURST DATA. III. ENERGY-DEPENDENT T {sub 90} DISTRIBUTIONS OF GBM GRBs AND INSTRUMENTAL SELECTION EFFECT ON DURATION CLASSIFICATION

The durations (T {sub 90}) of 315 gamma-ray bursts (GRBs) detected with Fermi/GBM (8-1000 keV) up to 2011 September are calculated using the Bayesian Block method. We compare the T {sub 90} distributions between this sample and those derived from previous/current GRB missions. We show that the T {sub 90} distribution of this GRB sample is bimodal, with a statistical significance level comparable to those derived from the BeppoSAX/GRBM sample and the Swift/BAT sample, but lower than that derived from the CGRO/BATSE sample. The short-to-long GRB number ratio is also much lower than that derived from the BATSE sample, i.e., 1:6.5 versus 1:3. We measure T {sub 90} in several bands, i.e., 8-15, 15-25, 25-50, 50-100, 100-350, and 350-1000 keV, to investigate the energy-dependence effect of the bimodal T {sub 90} distribution. It is found that the bimodal feature is well observed in the 50-100 and 100-350 keV bands, but is only marginally acceptable in the 25-50 keV and 350-1000 keV bands. The hypothesis of bimodality is confidently rejected in the 8-15 and 15-25 keV bands. The T {sub 90} distributions in these bands are roughly consistent with those observed by missions with similar energy bands. The parameter T {sub 90} as a function of energy follows T-bar {sub 90}{proportional_to}E{sup -0.20{+-}0.02} for long GRBs. Considering the erratic X-ray and optical flares, the duration of a burst would be even longer for most GRBs. Our results, together with the observed extended emission of some short GRBs, indicate that the central engine activity timescale would be much longer than T {sub 90} for both long and short GRBs and the observed bimodal T {sub 90} distribution may be due to an instrumental selection effect.

79 ASTRONOMY AND ASTROPHYSICS↗

BLACK HOLE MASS AND EDDINGTON RATIO DISTRIBUTION FUNCTIONS OF X-RAY-SELECTED BROAD-LINE AGNs AT z {approx} 1.4 IN THE SUBARU XMM-NEWTON DEEP FIELD

In order to investigate the growth of supermassive black holes (SMBHs), we construct the black hole mass function (BHMF) and Eddington ratio distribution function (ERDF) of X-ray-selected broad-line active galactic nuclei (AGNs) at z {approx} 1.4 in the Subaru XMM-Newton Deep Survey (SXDS) field. A significant part of the accretion growth of SMBHs is thought to take place in this redshift range. Black hole masses of X-ray-selected broad-line AGNs are estimated using the width of the broad Mg II line and 3000 A monochromatic luminosity. We supplement the Mg II FWHM values with the H{alpha} FWHM obtained from our NIR spectroscopic survey. Using the black hole masses of broad-line AGNs at redshifts between 1.18 and 1.68, the binned broad-line AGN BHMFs and ERDFs are calculated using the V{sub max} method. To properly account for selection effects that impact the binned estimates, we derive the corrected broad-line AGN BHMFs and ERDFs by applying the maximum likelihood method, assuming that the ERDF is constant regardless of the black hole mass. We do not correct for the non-negligible uncertainties in virial BH mass estimates. If we compare the corrected broad-line AGN BHMF with that in the local universe, then the corrected BHMF at z = 1.4 has a higher number density above 10{sup 8} M{sub Sun} but a lower number density below that mass range. The evolution may be indicative of a downsizing trend of accretion activity among the SMBH population. The evolution of broad-line AGN ERDFs from z = 1.4 to 0 indicates that the fraction of broad-line AGNs with accretion rates close to the Eddington limit is higher at higher redshifts.

79 ASTRONOMY AND ASTROPHYSICS↗

Correlation, Cost Risk, and Geometry

The geometric viewpoint identifies the choice of a correlation matrix for the simulation of cost risk with the pairwise choice of data vectors corresponding to the parameters used to obtain cost risk. The correlation coefficient is the cosine of the angle between the data vectors after translation to an origin at the mean and normalization for magnitude. Thus correlation is equivalent to expressing the data in terms of a non orthogonal basis. To understand the many resulting phenomena requires the use of the tensor concept of raising the index to transform the measured and observed covariant components into contravariant components before vector addition can be applied. The geometric viewpoint also demonstrates that correlation and covariance are geometric properties, as opposed to purely statistical properties, of the variates. Thus, variates from different distributions may be correlated, as desired, after selection from independent distributions. By determining the principal components of the correlation matrix, variates with the desired mean, magnitude, and correlation can be generated through linear transforms which include the eigenvalues and the eigenvectors of the correlation matrix. The conversion of the data to a non orthogonal basis uses a compound linear transformation which distorts or stretches the data space. Hence, the correlated data does not have the same properties as the uncorrelated data used to generate it. This phenomena is responsible for seemingly strange observations such as the fact that the marginal distributions of the correlated data can be quite different from the distributions used to generate the data. The joint effect of statistical distributions and correlation remains a fertile area for further research. In terms of application to cost estimating, the geometric approach demonstrates that the estimator must have data and must understand that data in order to properly choose the correlation matrix appropriate for a given estimate. There is a general feeling by employers and managers that the field of cost requires little technical or mathematical background. Contrary to that opinion, this paper demonstrates that a background in mathematics equivalent to that needed for typical engineering and scientific disciplines at the masters or doctorate level is appropriate within the field of cost risk.

Dean, Edwin B.↗

Tomography of Atomic Nuclei

We carry out continuum quantum Monte Carlo calculations of the quantum-mechanical Wigner distribution functions of selected nuclei, up to $^{16}$O. These distributions provide a form of quantum tomography of the spatial and momentum structure of the system. They also help identify the location of high-momentum regions in atomic nuclei and provide insight into the onset of alpha clustering. Besides their intrinsic interest, these distributions will be useful for neutrino event generators, as they correlate the positions and momenta of nucleons in the initial target state. To facilitate their application, we address the need to store them compactly by developing an accurate Gaussian Process emulator that automatically preserves their normalization.

Rocco, Noemi [Valencia U., IFIC; Fermilab]↗

Automatic selection of dynamic data partitioning schemes for distributed memory multicomputers

For distributed memory multicomputers such as the Intel Paragon, the IBM SP-2, the NCUBE/2, and the Thinking Machines CM-5, the quality of the data partitioning for a given application is crucial to obtaining high performance. This task has traditionally been the user's responsibility, but in recent years much effort has been directed to automating the selection of data partitioning schemes. Several researchers have proposed systems that are able to produce data distributions that remain in effect for the entire execution of an application. For complex programs, however, such static data distributions may be insufficient to obtain acceptable performance. The selection of distributions that dynamically change over the course of a program's execution adds another dimension to the data partitioning problem. In this paper, we present a technique that can be used to automatically determine which partitionings are most beneficial over specific sections of a program while taking into account the added overhead of performing redistribution. This system is being built as part of the PARADIGM (PARAllelizing compiler for DIstributed memory General-purpose Multicomputers) project at the University of Illinois. The complete system will provide a fully automated means to parallelize programs written in a serial programming model obtaining high performance on a wide range of distributed-memory multicomputers.

Palermo, Daniel J.↗

THE SIMULTANEOUS OPTICAL-TO-X-RAY SPECTRAL ENERGY DISTRIBUTION OF SOFT X-RAY SELECTED ACTIVE GALACTIC NUCLEI OBSERVED BY SWIFT

We report Swift observations of a sample of 92 bright soft X-ray selected active galactic nuclei (AGNs). This sample represents the largest number of AGNs observed to study the spectral energy distribution (SED) of AGNs with simultaneous optical/UV and X-ray data. The principal motivation of this study is to understand the SEDs of AGNs in the optical/UV to X-ray regime and to provide bolometric corrections which are important in determining the Eddington ratio L/L {sub Edd}. In particular, we rigorously explore the dependence of the UV-EUV contribution to the bolometric correction on the assumed EUV spectral shape. We find strong correlations of the spectral slopes {alpha}{sub X} and {alpha}{sub UV} with L/L {sub Edd}. Although narrow-line Seyfert 1 galaxies (NLS1s) have steeper {alpha}{sub X} and higher L/L {sub Edd} than broad-line Seyfert 1 galaxies (BLS1s), their optical/UV to X-ray spectral slopes {alpha}{sub ox} and optical/UV slopes {alpha}{sub UV} are very similar. The mean SED of NLS1s shows that in general this type of AGNs appears to be fainter in the UV and at hard X-ray energies than BLS1s. We find a strong correlation between {alpha}{sub X} and {alpha}{sub UV} for AGNs with X-ray spectral slopes {alpha}{sub X}<1.6. For AGNs with steeper X-ray spectra, both this relation and the relation between {alpha}{sub X} and L/L {sub Edd} break down. At {alpha}{sub X}{approx}1.6, L/L {sub Edd} reaches unity. We note an offset in the {alpha}{sub UV}-L/L {sub Edd} relation between NLS1s and BLS1s. We argue that {alpha}{sub UV} is a good estimator of L/L {sub Edd} and suggest that {alpha}{sub UV} can be used to estimate L/L {sub Edd} in high-redshift QSOs. Although NLS1s appear to be highly variable in X-rays, they only vary marginally in the UV.

79 ASTRONOMY AND ASTROPHYSICS↗