Search NASA⌕ Search

SEARCH · Search NASA

Results for “divertors”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Global fluid turbulence simulations in the scrape-off layer of a stellarator island divertor

Isothermal fluid turbulence simulations have been performed in the edge and scrape-off layer (SOL) of an analytic stellarator configuration with an island divertor, thereby providing numerical insight into edge turbulence in regions around islands in a stellarator. The steady-state transport follows the a curvature drive that is inverse to the major radius ( $1/R$ ) toward the outboard side, but large fluctuations are present throughout the island divertor region, with the average wavelength of similar size to the island width. The system exhibits a prominent $m=2$ , $n=5$ mode, where m is the poloidal mode number and n is the toroidal mode number, although other modes are present. The amplitude and radial extent of the density fluctuations are similar throughout the edge and SOL, but can decrease near island O-points. The fluctuations exhibit a predominantly positive skewness on the outboard midplane, indicating blob-like perturbations for the transport into the outer SOL. It is determined that a point on the separatrix is generally more correlated with regions outside of the SOL than a nearby reference point which does not lie on the separatrix.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Optimizing the Super H-mode pedestal to improve performance and facilitate divertor integration

Access to Super H-mode is demonstrated for moderately shaped plasmas in agreement with EPED predictions. In particular, Super H-mode is realized in a DIII-D shape that is accessible to the JET tokamak. The reduced triangularity of the JET-compatible shape compared to previous Super H-mode plasma shapes does not prevent deep ascension into the so-called Super H-mode “channel”. Operationally, access is enabled and optimized by a delaying the neutral beam power injection and thus protracting the L-H transition. In highly shaped DIII-D plasmas, the injection of nitrogen sufficient for the establishment of a radiative divertor by is shown to be possible during Super H-mode without pedestal degradation. Here, due to its increased stored energy and radiative divertor integration capabilities, the Super H-mode is a promising candidate as operating regime for JET, ITER and future fusion reactors.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Simulations of divertor plasmas with inverse sheaths

The effect of strong electron emission from material surfaces has been proposed to form an “inverse sheath”: a region with a positive potential relative to the near-wall plasma which prevents the flow of ions to the wall [M. D. Campanell, “Negative plasma potential relative to electronemitting surfaces,” Phys. Rev. E. 88, 033103 (2013); M. D. Campanell and M. V. Umansky, “Strongly emitting surfaces unable to float below plasma potential,” Phys. Rev. Lett. 116, 1–5 (2016); M. D. Campanell and G. R. Johnson, “Thermionic cooling of the target plasma to a sub-ev temperature,” Phys. Rev. Lett. 122, 1–5 (2019)]. We assess the viability of this regime in a tokamak device using the 2D edge plasma transport code UEDGE [T. Rognlien et al ., “A fully implicit, time dependent 2-D fluid code for modeling tokamak edge plasmas,” J. Nucl. Mater. 196–198, 347–351 (1992)]. Since the UEDGE code does not consider the sheath region directly, we apply boundary conditions at the divertor targets which emulate the physics of both “standard” and “inverse” sheath regimes [R. Masline et al ., “Influence of the inverse sheath on divertor plasma performance in tokamak edge plasma simulations,” Contrib. Plasma Phys. 60, e201900097 (2020)]. Using these boundary conditions, we perform scoping studies to assess plasma parameters near the target by varying the density at the core-edge interface. We observe a smooth transition in the resultant profiles of plasma parameters for the standard sheath, and a bifurcation across the simulation set for plasmas with an inverse sheath. The cause of this bifurcation is assessed by performing the parameter scan both with and without impurity radiation; we observe that the bifurcation persists in both cases, indicating that this bifurcation is caused by plasma recombination.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Study of detached plasma profile in the divertor simulation experimental module of tandem mirror GAMMA 10/PDX

A divertor simulation experimental module (D-module) in the tandem mirror GAMMA 10/PDX was used for the study of plasma detachment. In previous studies, it was difficult to measure far-upstream plasma parameters in the D-module, and only electrostatic probes on the target plate were used to perform electron temperature and density measurements. Furthermore, to study the detached plasma structure, a Thomson scattering (TS) system and a microwave interferometer system have been installed to measure the inside plasma parameters of the D-module, and a movable electrostatic probe has been placed at the inlet of the D-module to measure the inlet plasma density and temperature. The TS system in the central cell observed the electron temperature and density of the core plasma simultaneously. These measurements revealed the entire density and temperature structure from the core plasma to the divertor plate. The line average electron density measured by the microwave interferometer showed a rollover behavior during detachment. The results indicated that the ionization region was located around the center of the D-module, and it appears to move upstream along the axis.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

1D model of tokamak scrape-off layer and divertor plasmas: Dimensionless parameters and the results of numerical simulations

Solutions of a 1D model of the scrape-off layer and a divertor plasma in a tokamak are analyzed on the basis of dimensionless parameters governing the physics of both plasma and neutral transport and atomic physics processes. Numerical simulations based on fluid plasma and Monte Carlo neutral modeling confirm earlier results obtained with simplified analytic considerations and numerical simulations performed with fluid neutral description and demonstrate bifurcation of plasma parameters. Further, these simulations also confirm that the major physical reasons for the rollover of the plasma flux to the target, which is the key feature of the phenomenon of divertor plasma detachment, are the impurity radiation loss and plasma recombination. It is suggested that simulations of the edge plasma based on dimensionless parameters provide a powerful tool for checking the consistency of the physics incorporated in existing complex 2D codes used for edge plasma modeling.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

The plasma–sheath transition and Bohm criterion in a high recycling divertor

The high recycling regime of a divertor is characterized by high plasma particle fluxes and low temperature at the target, where a strong hydrogen recirculation loop exists. Atomic processes in the high recycling regime, such as ion–neutral friction and radiation, can affect the plasma momentum and energy transport in the sheath transition region. Here, in this work, the plasma–sheath transition near a high recycling wall is investigated. The Bohm speed, which constraints the ion exit flow speed, is evaluated from a transport model that accounts for the effect of the anisotropic transport and atomic collisions in the transition layer. A first principles kinetic code vector particle-in-cell with the atomic collision package is used to investigate a 1D self-consistent slab plasma with a high recycling boundary for the tungsten and carbon divertors. The results demonstrate the accuracy of the Bohm speed model in predicting the ion exit flow speed in the transition region, as well as the reduction of the Bohm speed due to the ion–neutral friction. The effect of different wall materials, tungsten, and carbon, on the Bohm speed and near-wall plasma profile is shown.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Pop-up Langmuir probe diagnostic in the water cooled divertor of Wendelstein 7-X

The design, development, and successful implementation of pop-up Langmuir probes installed in the water-cooled divertor of W7-X are described. The probes are controlled by drive coils (actuators) installed behind the divertor plates. These drive coils make use of the magnetic field in W7-X to move the probe tips into and out of the plasma. The drive coils were installed in the vacuum vessel after extensively testing the durability of the coils and analyzing the criteria for safe operation. The probe design is carefully tailored for each of the 36 probe tips in order to be suitable for the different magnetic field configurations used in W7-X and ensure that the probes do not present leading edges to the magnetic flux tubes. An electronic bridge circuit is used for measurement to compensate for the effects of signal propagation time on the long cable lengths used. The diagnostic is integrated with the segment control of W7-X for automated operation and control of the diagnostic. The evaluation of the results from the plasma operation is presented after accounting for appropriate sheath expansion for negative bias voltage on the probes.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2024

Multi-delay coherence imaging spectroscopy optimized for ion temperature measurements in the divertor plasma of the Wendelstein 7-X stellarator

A new coherence imaging spectroscopy (CIS) diagnostic optimized to measure the C 2+ impurity ion temperature T i spatial distribution in the divertor plasma of the W7-X stellarator is designed, tested, and validated. Using CIS to obtain T i in the edge of magnetically confined plasmas has historically been challenging because Doppler broadening and Zeeman splitting have comparable effects on the shape of spectral emission lines. To distinguish between these two mechanisms, a novel approach to birefringent crystal design is employed to minimize the diagnostic’s sensitivity to Zeeman splitting. The recently developed pixelated multi-delay CIS approach is also used to obtain four times as much spectral information as traditional CIS approaches. The T i -optimized CIS diagnostic is validated in a long-pulse W7-X plasma by comparison with a high-resolution spectrometer whose sightlines overlap with the CIS field of view. The CIS and spectrometer T i profiles have the same shape and agree to within 10% on average and 25% in the worst case. Images of the T i distribution near the divertor show toroidally elongated bands aligned with the magnetic field, with T i ranging between 10 and 40 eV.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Conceptual design of a Doppler spectrometer for 102 m/s cross-field flows in tokamak divertors

The cross-field transport in the scrape-off-layers (SOLs) and divertors in tokamaks is of a similar size to the poloidal component of the parallel flow, thereby significantly impacting the plasma transport there. However, its direct observation has been challenging because the drift velocity (102–103 m/s) is significantly below the detection limit of conventional diagnostics. To realize cross-field ion flow measurement, a variety of systematic uncertainties in the system must be narrowed down. Here, we develop a conceptual design of the Doppler spectrometry that enables us to measure the impurity flows with 102-m/s accuracy based on an in situ wavelength-calibration technique developed in the astrophysics field, the iodine-cell method. We discuss its properties and applicability. In particular, the scaling relation between wavelength accuracy and various spectroscopic parameters is newly presented, which suggests the high importance of the wavelength resolution of the system. Based on transport simulations for the JT-60SA divertor, the feasibility of the system is assessed.

Fujii, Keisuke↗
DOE OSTI2025

Edge-localized mode mitigation enabled by active control of pedestal density gradient with new EAST tokamak divertor

Mitigation of large edge-localized modes (ELMs) has been achieved by actively reducing the pedestal density gradient with the EAST new right-angled lower divertor through changing the strike point position from the vertical target to the horizontal target. A series of dedicated experiments in the 2021–2024 EAST campaigns demonstrate that this ELM control solution is highly reproducible in a broad parameter space of edge safety factor q 95 = 4.7–7.1, heating power P total = 2.3–5 MW, and pedestal collisionality $ν_{e,ped}^{*}$ = 1–6, under both favorable and unfavorable magnetic configurations. Higher plasma density could facilitate the achievement of this ELM control solution. Statistical results indicate that the ELM mitigation effect can be observed at relatively larger Greenwald density fraction of f GW > 0.47. In addition, this ELM mitigation effect can be achieved with both lithium-coated and boronized metal walls. The pedestal density gradient is systematically lower in the horizontal target case than that of the vertical target case when the ELM mitigation effect can be observed. SOLPS-ITER simulation results indicate that the pedestal fueling from divertor recycling is significantly lower in the horizontal target case. This could contribute to the formation of a flattened pedestal density profile with small ELMs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Divertor plasma detachment: roles of plasma momentum, energy, and particle balances

Abstract Contrary to statements from some recent papers, the bifurcation of the scrape-off layer and divertor plasma parameters, as described within a 1D model, does exist. The analysis of both numerical simulations and experimental data shows that the real physical reasons that can cause a strong reduction of the plasma particle flux to the target j d are impurity radiation loss and volumetric plasma recombination. Fitting the parameter describing the ‘plasma momentum removal’, based on the results of 2D numerical simulations, then using this fit in subsequent analytic expressions for j d , and finally interpreting the evolution of j d as the result of elastic plasma-neutral interactions break the causality principle and lead to a wrong physical picture of divertor plasma detachment.

Physics↗
DOE OSTI2026

Analysis and modeling of tungsten emission and net erosion in the DIII-D divertor using updated atomic data

Tungsten (W) is one of the leading candidate materials for plasma-facing components. However, its main drawback is its high radiative efficiency; if W penetrates the plasma, it can lead to core degradation or even collapse. Since eroded tungsten tends to ionize in the sheath and redeposit promptly, the net erosion flux that escapes prompt redeposition can differ significantly from the gross erosion. This work presents a modeling framework to estimate net erosion and photon emission from W coatings exposed to the lower divertor of DIII-D using the DiMES material exposure probe. The approach couples RustBCA for sputtering yields with a Monte Carlo transport code (LPTMC) that models redeposition and W emission. Computation is carried out with new atomic data, based on R-matrix and Mons calculations, leading to lower ionization probabilities and a twofold increase in net erosion estimates compared to calculations done with OPEN-ADAS atomic data. The model results are benchmarked against experimental measurements, showing quantitative agreement for erosion, although the trends in W emission are reproduced only qualitatively. The model is also used to assess whether W II emission can serve as a direct measurement of the net erosion of W in the lower divertor of DIII-D. Simulations show that this is not valid if the electron pressure is above ~120 Pa or if the toroidal length of the eroded material is smaller than the parallel-to-B distance traveled by impurity ions before steady-state conditions are reached. Finally, simulations suggest that when W is sputtered by carbon ions with high impact energies (≳300 eV) in DIII-D, W net erosion scales with W gross erosion and can be numerically approximated using W I flux alone as input.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Simulation of divertor heat flux width on EAST by BOUT++ transport code

The BOUT++ edge plasma transport code is applied to study the effects of neutral recycling, drifts and heating scheme on edge plasma profiles and the divertor heat flux width of two discharges of the experimental advanced superconducting tokamak (EAST) steady-state H-mode plasmas heated by low hybrid wave (LHW) and neutral beam (NB), respectively. Neutral recycling seems to have played an important role in the plasma density profile. The edge plasma density drops dramatically for the case w/o neutral recycling, while it can be sustained for the case w/ neutral recycling. Drifts are found to have significant influences on edge plasma profiles. Both the amplitude and width of the divertor heat flux are found to have increased a lot due to drifts. The simulated heat flux width w/ drifts for the two discharges shows reasonable agreement with the experiments. However, the width from the simulation and experiment for the LHW heated discharge is much larger than that of the NB heated discharge. Comparison with Goldston's drift-based model and more detailed analysis on the heat flux contributions from drifts versus turbulence show that drifts are the dominant factor in edge plasma transport for both LHW and NB heated discharges, while turbulence may have played a more important role in determining the heat flux width in LHW heated discharges than that in NB heated discharges. This may account for the larger heat flux width in the LHW heated discharge. The magnetic topology and the equilibrium change by the LHW power may also be a potential reason for the larger heat flux width in the LHW heated discharges, which still needs more evidence and studies to support it. Finally, additional SOLPS simulation w/o drifts for the two discharges show reasonable agreement with the counterpart from the BOUT++ simulation, suggesting the two are both suitable codes for EAST edge plasma simulation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Beryllium-driven structural evolution at the divertor surface

Erosion of the beryllium first wall material in tokamak reactors has been shown to result in transport and deposition on the tungsten divertor. Experimental studies of beryllium implantation in tungsten indicate that mixed W–Be intermetallic deposits can form, which have lower melting temperatures than tungsten and can trap tritium at higher rates. To better understand the formation and growth rate of these intermetallics, we performed cumulative molecular dynamics (MD) simulations of both high and low energy beryllium deposition in tungsten. In both cases, a W–Be mixed material layer (MML) emerged at the surface within several nanoseconds, either through energetic implantation or a thermally-activated exchange mechanism, respectively. While some ordering of the material into intermetallics occurred, fully ordered structures did not emerge from the deposition simulations. Targeted MD simulations of the MML to further study the rate of Be diffusion and intermetallic growth rates indicate that for both cases, the gradual re-structuring of the material into an ordered intermetallic layer is beyond accessible MD time scales(≤1 μs). However, the rapid formation of the MML within nanoseconds indicates that beryllium deposition can influence other plasma species interactions at the surface and begin to alter the tungsten material properties. Therefore, beryllium deposition on the divertor surface, even in small amounts, is likely to cause significant changes in plasma-surface interactions and will need to be considered in future studies.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Effects of radial transport on divertor power and particle flux widths under different operational regimes in EAST

Here, a study of the effects of radial transport on the outer divertor particle and power flux widths (λ js and λ q ) is carried out using plasmas under different operational regimes in the Experimental Advanced Superconducting Tokamak (EAST). In the EAST experiments, the λ js values measured during the grassy intra- and inter-ELM phases are similar, and the averaged value of λ js during grassy ELMy discharges is found to be smaller than that of the intra-ELM phase of type-I ELMy discharges but larger than that of the inter-ELM phase of type-I ELMy discharges. Simulations of scans of the radial particle and heat transport coefficients, D and χ e , performed using the BOUT++ transport code show that both λq and λjs increase with D and χe, especially when D or χ e is larger than a threshold value, indicating that background turbulence starts to matter in the determination of λ q and λ js when D or χ e surpasses the threshold value. A comparison between the simulation of the D scan and the experimental results shows that the different values of λ js obtained under different plasma operational regimes are probably due to the different intensities of background turbulence, which is beyond the scope of Goldston's heuristic drift-based model as reported by Goldston et al (2012 Nucl. Fusion 52 013009), since their model was derived by assuming that turbulent transport does not exceed a certain level. The ratio of λ js to λ q is greatly affected by the radial transport; however, simulations carried out using Scrape-off Layer Plasma Simulation (SOLPS) show that divertor geometry and plasma density have big influences on λ js , and thus could also affect the ratio of λ js to λ q .

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Overview of the results from divertor experiments with attached and detached plasmas at Wendelstein 7-X and their implications for steady-state operation

Abstract Wendelstein 7-X (W7-X), the largest advanced stellarator, is built to demonstrate high power, high performance quasi-continuous operation. Therefore, in the recent campaign, experiments were performed to prepare for long pulse operation, addressing three critical issues: the development of stable detachment, control of the heat and particle exhaust, and the impact of leading edges on plasma performance. The heat and particle exhaust in W7-X is realized with the help of an island divertor, which utilizes large magnetic islands at the plasma boundary. This concept shows very efficient heat flux spreading and favourable scaling with input power. Experiments performed to overload leading edges showed that the island divertor yields good impurity screening. A highlight of the recent campaign was a robust detachment scenario, which allowed reducing power loads even by a factor of ten. At the same time, neutral pressures at the pumping gap entrance yielded the particle removal rate close to the values required for stable density control in steady-state operation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Parallel transport modeling of linear divertor simulators with fundamental ion cyclotron heating *

Abstract The Material Plasma Exposure eXperiment (MPEX) is a steady state linear device with the goal to perform plasma material interaction studies at future fusion reactor relevant conditions. A prototype of MPEX referred as ‘Proto-MPEX’ is designed to carry out research and development related to source, heating and transport concepts on the planned full MPEX device. The auxiliary heating schemes in MPEX are based on cyclotron resonance heating with radio frequency (RF) waves. Ion cyclotron heating (ICH) and electron cyclotron heating in MPEX are used to independently heat the ions and electrons and provide fusion divertor conditions ranging from sheath-limited to fully detached divertor regimes at a material target. A hybrid particle-in-cell code- PICOS++ is developed and applied to understand the plasma parallel transport during ICH in MPEX/Proto-MPEX to the target. With this tool, evolution of the distribution function of MPEX/Proto-MPEX ions is modeled in the presence of (a) Coulomb collisions, (b) volumetric particle sources and (c) quasi-linear RF-based ICH. The code is benchmarked against experimental data from Proto-MPEX and simulation data from B2.5 EIRENE. The experimental observation of ‘density-drop’ near the target in Proto-MPEX and MPEX during ICH is demonstrated and explained via physics-based arguments using PICOS++ modeling. In fact, the density drops at the target during ICH in Proto-MPEX/MPEX to conserve the flux and to compensate for the increased flow during ICH. Furthermore, sensitivity scans of various plasma parameters with respect to ICH power are performed for MPEX to investigate its role on plasma transport and particle and energy fluxes at the target.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Exploration of non-resonant divertor features on the Compact Toroidal Hybrid

Abstract Non-resonant divertors (NRDs) separate the confined plasma from the surrounding plasma facing components (PFCs). The resulting striking field line intersection pattern on these PFCs is insensitive to plasma equilibrium effects. However, a complex scrape-off layer (SOL), created by chaotic magnetic topology in the plasma edge, connects the core plasma to the PFCs through varying magnetic flux tubes. The Compact Toroidal Hybrid (CTH) serves as a test-bed to study this by scanning across its inductive current. Simulations observe a significant change of the chaotic edge structure and an effective distance between the confined plasma and the instrumented wall targets. The intersection pattern is observed to be a narrow helical band, which we claim is a resilient strike line pattern. However, signatures of finger-like structures, defined as heteroclinic tangles in chaotic domains, within the plasma edge connect the island chains to this resilient pattern. The dominant connection length field lines intersecting the targets are observed via heat flux modeling with EMC3-EIRENE. At low inductive current levels, the excursion of the field lines resembles a limited plasma wall scenario. At high currents, a private flux region is created in the area where the helical strike line pattern splits into two bands. These bands are divertor legs with distinct SOL parallel particle flow channels. The results demonstrate the NRD strike line pattern resiliency within CTH, but also show the underlying chaotic edge structure determining if the configuration is diverted or limited. This work supports future design efforts for a mechanical structure for the NRD.

Physics↗