Search NASA⌕ Search

SEARCH · Search NASA

Results for “drying effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Enhancing methane production of anaerobic digested sewage sludge by advanced wet oxidation & steam explosion pretreatment

Anaerobic digestion (AD) of sewage sludge is associated with lowered carbon conversion efficiency due to the recalcitrance of microbial cells in the Waste Activated Sludge (WAS) from the aeration basins with 50 % of the dry weight still being present after AD. The effect of Advanced Wet Oxidation & Steam Explosion (AWOEx) pretreatment on the methane yield at variable temperatures (165–200 °C), residence time (15–45 min) and oxygen dosage (1%–10% based on VS concentration) was tested in this study. Central composite design (JMP® Pro) was used to design 19 runs of AWOEx pretreatment of dewatered digested sewage sludge (DADSS) at different operating conditions. After pretreatment the DADSS was fed to 19 bioreactors operated in semi-continues mode at 37 °C. The highest average methane yields of 183 mL/g VS and 170 mL/g VS were found for the bioreactors receiving DADSS pretreated at 165 °C with a retention time of 15 min and 10 % O2 (Condition 1), and, 182.5 °C with a retention time of 15 min and 5.5 % O2 (Condition 2). This corresponds to an increase in the methane production of 156.2 % and 140.5 % compared to the methane production from the DADSS without pretreatment.

09 BIOMASS FUELS↗
DOE OSTI2023

Using temperature and flow fields to detect gas leakage from canisters containing spent nuclear fuel: Applications to RAMM-TM

The multi-physics STAR-CCM+ code has been used to simulate the temperature and flow fields in canister gas leakage experiments conducted by using a 1/4.5-scale model storage cask. The simulations were conducted at Argonne National Laboratory’s Laboratory Computing Resource Center, utilizing high-performance computing resources. Development of STAR-CCM+ simulation models for the 1/4.5-scale model cask is described herein, followed by validation of the simulation results against experimental data. Canister depressurization and thermal response during gas leakage are discussed, along with analyses of the leakage path and allowable leakage rate. The insights gained from the STAR-CCM+ simulations and leakage analyses will help guide future experiments and actual industry applications of Argonne’s Remote Area Modular Monitoring system for canister surface temperature measurement (RAMM-TM) to enable effective aging management of spent fuel during extended dry storage, as well as help reduce risks to public safety and health and protect the environment.

Canister gas leakage↗
DOE OSTI2020

Investigating drivers of microbial activity and respiration in a forested bog

Northern peatlands store nearly one-third of terrestrial carbon (C) stocks while covering only 3% of the global landmass; nevertheless, the drivers of C cycling in these often-waterlogged ecosystems are different from those that control C dynamics in upland forested soils. To explore how multiple abiotic and biotic characteristics of bogs interact to shape microbial activity in a northern, forested bog, we added a labile C tracer ( 13 C-labeled starch) to in situ peat mesocosms and correlated heterotrophic respiration with natural variation in several microbial predictor variables, such as enzyme activity and microbial biomass, as well as with a suite of abiotic variables and proximity to vascular plants aboveground. We found that peat moisture content was positively correlated with respiration and microbial activity, even when moisture levels exceeded total saturation, suggesting that access to organic matter substrates in drier environments may be limiting for microbial activity. Proximity to black spruce trees decreased total and labile heterotrophic respiration. This negative relationship may reflect the influence of tree evapotranspiration and peat shading effects; i.e., microbial activity may decline as peat dries and cools near trees. Here, we isolated the response of heterotrophic respiration to explore the variation in, and interactions among, multiple abiotic and biotic drivers that influence microbial activity. This approach allowed us to reveal the relative influence of individual drivers on C respiration in these globally important C sinks.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Zonal‐Scale of the Madden‐Julian Oscillation and Its Propagation Speed on the Interannual Time‐Scale

Abstract While no significant long‐term trend in the propagation speed of the Madden‐Julian Oscillation (MJO) in boreal winter is found during the past decades, pronounced year‐to‐year variability of the MJO phase speed is illustrated by analyzing a century‐long record data set. During the winters when fast MJO propagation is observed, the MJO exhibits a much larger zonal‐scale than that during the winters with slow propagation. A broader extension in MJO circulation effectively induces stronger and broader lower‐tropospheric moistening (drying) to the east (west) of MJO through horizontal moisture advection, prompting a faster MJO phase speed. The larger MJO zonal‐scale during the fast MJO propagation winters is coincident with anomalously increased background sea surface temperatures and precipitable water over both the western Indian Ocean and central/eastern Pacific, reminiscent of an expansion of the Indo‐Pacific warm pool. A fundamental question remains open regarding the key processes that determine the zonal‐scale of MJO organization.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Effect of air path heat losses at different locations in vapor compression-based clothes dryer: Quasi-steady modeling and design implications

Clothes drying is among the most power-intensive household end uses, and vapor compression-based clothes dryers offer substantial energy cost savings compared with conventional electric heater dryers. However, parasitic heat losses along the air path, that is, heat loss at the upstream of the drum, inside the drum, and at downstream of the drum, remain rarely quantified, but can strongly affect overall performance according to experiments. Here, this study enhances a vapor compression simulation model by integrating a validated drum model using a dimensionless heat-and-mass-transfer effectiveness correlation derived from 63 drying tests in the literature to form a quasi-steady dryer simulation model. The model is validated against laboratory measurements of a baseline dryer. The impact of heat losses is simulated at three locations and explored through 16 heat loss cases spanning two loads (2 and 5 kg), two airflow rates, and multiple loss distributions. For a 5 kg wet load, eliminating pre-drum and in-drum losses reduces total energy use by up to 34–35% and shortens drying time by 27–38% compared with the baseline. At a 2 kg wet load, introducing post-drum heat loss lowers energy costs by up to 23% and reduces operation time by up to 57% compared with the baseline. The results demonstrate that the impact of heat loss is location dependent. Vapor compression dryers should minimize pre-drum and in-drum losses while potentially exploiting post-drum heat dissipation to enhance the drying rate and energy cost savings.

Dryer↗
DOE OSTI2022

Water level changes in Lake Erie drive 21st century CO 2 and CH 4 fluxes from a coastal temperate wetland

Wetland water depth influences microbial and plant communities, which can alter the above- and below-ground carbon cycling of a wetland. Wetland water depths are likely to change due to shifting precipitation patterns, which will affect projections of greenhouse gas emissions; however, these effects are rarely incorporated into wetland greenhouse gas models. Seeking to address this gap, we used a mechanistic model, ecosys, to simulate a range of water depth scenarios in a temperate wetland, and analyzed simulated predictions of carbon dioxide (CO 2 ) andmethane (CH 4 ) fluxes over the 21st century. We tested our model using eddy covariance measurements of CO 2 and CH 4 fluxes collected at the Old Woman Creek National Estuarine Research Reserve (OWC) during 2015 and 2016. OWC is a lacustrine, estuarine, freshwater, mineral-soil marsh. An empirical model found that the wetland water depth is highly dependent on the water depth of the nearby Lake Erie. Future wetland surface water depths were modeled based on projection of Lake Erie's water depth using four separate NOAA projections, resulting in four wetland water-depth scenarios. Two of the four 21st century projections for Lake Erie water depths used in this study indicated that the water depth of the wetland would remain nearly steady; however, the other two indicated decreases in the wetland water depth. In our scenario where the wetland dries out, we project the wetland's climatological warming effect will decrease due to smaller CH 4 fluxes to the atmosphere and larger CO 2 uptake by the wetland. We also found that increased water level can lower emissions by shifting the site towards more open water areas, which have lower CH 4 emissions. We found that decreased water depths would cause more widespread colonization of the wetland by macrophyte vegetation. Using an empirical relationship, we also found that further drying could result in other, non-wetland vegetation to emerge, dramatically altering soil carbon cycling. In three of our four projections, we found that in general the magnitude of CO 2 and CH 4 fluxes steadily increase over the next 100 years in response to higher temperatures. However, in our driest simulations, we projected a different response due to increased oxidation of soil carbon, with CH 4 emissions decreasing substantially from an annual cumulative peak of 224.6 to a minimum of 104.7 gC m –2 year –1 . In that same simulation, net cumulative flux of CO 2 changed from being a sink of 56.5 gC m –2 year –1 to a source of 369.6 gCm –2 year –1 over the same period, despite a temperature increase from 13.7 °C to 14.2 °C. This temperature shift in our other three cases with greater water depths increased the source strength of CH 4 and the sink strength of CO 2 . Here, we conclude that the magnitude of wetland greenhouse-gas fluxes depended on the water depth primarily as it affected the areal percentage of the wetland available for plant colonization, but dramatic decreases in water depths could cause significant reductions in the wetland CH 4 fluxes, while simultaneously altering the wetland vegetation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Pressure falloff testing to characterize CO 2 plume and dry-out zone during CO 2 injection in saline aquifers

The fluid mobilities and the lateral extent of the CO 2 plume and the dry-out zone are among important unknowns required to effectively manage CO 2 storage in saline aquifers projects. These unknowns can be derived from pressure falloff testing which has been widely used to characterize the subsurface. This paper provides a three-region analytical solution for falloff pressure during the infinite-acting period of CO 2 injection in saline aquifers. The solution is derived using Laplace transformation technique of the governing diffusivity equations and the accompanying initial and boundary conditions. The exact solution is validated against numerical results obtained from a black-oil reservoir simulator for two cases. The solution is approximated into simple forms in real-time domain considering different time periods. Then, a graphical semi-log analysis technique based on the approximate solutions is provided as an interpretation tool of falloff tests where the fluid mobilities and the extents of dry-out zone and CO 2 plume can be inferred. The interpretation technique is applied to synthetic falloff test data to investigate its potential and reliability.

02 PETROLEUM↗
DOE OSTI2023

Corrosion-Resistant Coatings on Spent Nuclear Fuel Canisters to Mitigate and Repair Potential Stress Corrosion Cracking (FY23 Status)

This report summarizes the activities performed by Sandia National Laboratories in FY23 to identify and test coating materials for the prevention, mitigation, and/or repair of potential chloride-induced stress corrosion cracking in spent nuclear fuel dry storage canisters. This work continues efforts by Sandia National Laboratories that are summarized in previous reports from FY20 through FY22 on the same topic. In FY23, Sandia National Laboratories, in collaboration with five industry partners through a memorandum of understanding, evaluated the physical, mechanical, and corrosion-resistance properties of eight different coating systems. The evaluation included thermal and radiation environments relevant to various time periods of storage for spent nuclear fuel canisters. The coating systems include polymeric (polyetherketoneketone, modified polyimide/polyurea, modified phenolic resin, epoxy), organic/inorganic ceramic hybrids (silane-based polyurethane hybrid and a quasi-ceramic sol-gel polyurethane hybrid), and coatings utilizing a Zn-rich primer applied to stainless steel coupons. The results and implications of these tests are summarized in this report. These analyses will be used to identify the most effective coatings for potential use on spent nuclear fuel dry storage canisters and to identify specific needs for further optimization of coating technologies for application on spent nuclear fuel canisters.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Files and scripts to support manuscript Shuman et al 2023 FATES-SPITFIRE ecosystem assembly across tropics

The dataset includes the parameter and domain files, relevant output files, and scripts to generate simulations and perform analysis with Jupyter notebooks that support the manuscript Shuman, JK et al 2023 “Dynamic ecosystem assembly and escaping the “fire-trap” in the tropics: Insights from FATES_15.0.0”. We have adapted the fire-behavior and effects module, SPITFIRE, for use with the Functionally Assembled Terrestrial Ecosystem Simulator (FATES), a size-structured vegetation demographic model. We test how climate, fire regime and fire-tolerance plant traits interact to determine the biogeography of tropical forests and grasslands. We assign different fire-tolerance strategies based on crown, leaf and bark characteristics, which are key observed fire-tolerance traits across woody plants. For these simulations, three types of vegetation compete for resources: a fire-vulnerable tree with thin bark, a vulnerable deep crown and fire-intolerant foliage; a fire-tolerant tree with thick bark, a thin crown and fire-tolerant foliage; and a fire-promoting C4 grass. We explore the model sensitivity to a critical parameter governing fuel moisture, and show that drier fuels promote increased burning, an expansion of area for grass and fire-tolerant trees and a reduction of area for fire-vulnerable trees. This conversion to lower biomass or grass areas with increased fuel drying results in increased fire burned area and its effects, which could fee back to local climate variables. Simulated size-based fire mortality for trees less than 20 cm in diameter and those with fire-vulnerable traits is higher than that for larger and/or fire-tolerant trees, in agreement with observations. Fire-disturbed forests demonstrate reasonable productivity and capture observed patterns of aboveground biomass in areas dominated by natural vegetation for the recent historical period, but have a large bias in less disturbed areas. Though the model predicts a greater extent of burned fraction than observed in areas with grass dominance, the resulting biogeography of fire-tolerant, thick-bark trees and fire-vulnerable, thin-bark trees corresponds to observations across the tropics. In areas with more than 2500 mm of precipitation, simulated fire frequency and burned area are low, with fire intensities below 150 kW m-1, consistent with observed understory fire behavior across the Amazon. Areas drier than this demonstrate fire intensities consistent with those measured in savannas and grasslands, with high values up to 4000 kW m-1. The results support a positive grass-fire feedback across the region, and suggest that forests which have existed without frequent burning may be vulnerable at higher fire intensities, which is of greater concern under intensifying climate and land use pressures. The ability of FATES to capture the connection between fire disturbance and plant fire-tolerance strategies in determining biogeography provides a useful tool for assessing the vulnerability and resilience of these critical carbon storage areas under changing conditions across the tropics.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Consequence Analysis of Residual Water in a Storage Canister - 20484

Recent observations from projects sponsored under the DOE-Nuclear Energy Spent Fuel and Waste Disposition campaign show that residual free water, well above the 0.4 gm-moles that correspond to a 3 torr rebound pressure after a 30-minute hold following prototypic drying, may remain within SNF canisters used for long-term dry storage. Specifically, experimental observations in an Integrated Research Project showed subzero temperatures and a local pocket of frozen water in a mockup fuel assembly subjected to an industry practiced drying process. In gas sampling and analysis from the High Burnup (HBU) Demonstration project, using a fully loaded and dried SNF canister, indicated presence of 100 g of residual water had remained in the canister. The effects of residual water in terms of potential adverse impacts on the condition of the SNF and the canister internals during long-term dry storage has been rigorously evaluated to address inadvertent residual water contents. The impact of residual water on the fuel and canister internals, with a focus on the oxidation of the cladding and of postulated exposed (breached-clad) fuel, were evaluated using an integrated set of time-dependent environmental conditions with semi-empirical materials oxidation models. An 'integration model,' with coupled sub-models, developed and previously used by the Center for Nuclear Waste Regulatory Analysis (CNWRA), was applied and expanded with improved sub-models for water radiolysis, and for cladding and fuel oxidations. Cladding oxidation models for various alloys were developed using the rate constants for various cladding alloys in the dry storage temperature range. A burnup-dependent fuel oxidation model was developed; it accounted for inhibition effect of fission products on fuel oxidation rates. The potential for extension of the initial breach flaw (1 mm hole) was evaluated by two separate mechanics criteria. In the first case, a critical cladding strain criterion was used. In the second case, a critical stress intensity was used to evaluate stability of a planar axial flaw postulate. A failure condition exists when a sufficient amount of fuel oxidation (at the postulated breached-clad location) causes fuel pellet swelling to load the cladding to meet a mechanics criterion for flaw extension. The integration model's results provide the following insights. The radiolysis-generated oxygen is consumed with a partitioning between the cladding and the fuel. The extent of cladding oxidation is no more than 2 μm additional consumption of the cladding metal even with 10 moles of residual water, indicating that changes in cladding conditions due to water are expected to be negligible. The conditions for cladding failure (breach opening size extension) directly correlates with the extent of fuel oxidation. Fuel oxidation significant to extend the breach could occur even with 5.5 moles of residual water. The results indicate that fuel oxidation vis-a-vis cladding oxidation is more likely under a higher radiation field, i.e., when radiolytic decomposition of the residual water occurs in few years compared to several decades, and that the conditions to cause failure are increased with fuel and cladding temperatures approaching the peak storage temperature limit of 400 deg. C. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2024

Evaluation of a Process to Separate Ensiled Corn Grain and Stover for Improved Utilization as a Biomass Feedstock

Corn grain and chopped stover were stored anaerobically at 37% to 50% (w.b.) aggregate moisture content to create a unique biomass feedstock. However, after storage, the two fractions must be separated to accommodate different conversion pathways. In this work, a modified cleaning system from a grain combine harvester was evaluated to investigate its effectiveness in separating the grain from the stover. While this system has been purposefully built for this task, there is no previous literature on separating grain at high material other than grain (MOG) to grain ratios. Using this system, material was separated into four fractions: Grain, Tailings, Heavy MOG, and Light MOG. Subsamples were collected, oven dried, and then hydrodynamically separated to quantify the grain content in the four fractions. Several different configurations of air velocities, mass flow rate, material MOG: grain ratios, and sieve types and openings were investigated. Grain capture was defined as the fraction of the total grain dry mass collected in the grain and tailings fractions. In five experiments, the grain capture effectiveness varied from 89.2% to 99.4% on a dry basis. The dry basis foreign matter (FM) in the clean grain was 0.6% to 10.8%. As a result, the use of a modified combine cleaning system has the potential to be one step in a system to fractionate corn grain from stover (i.e., MOG) in a biorefinery that uses both starch and cellulose as biomass feedstocks.

09 BIOMASS FUELS↗
DOE OSTI2022

Corrosion-Resistant Coatings on Spent Nuclear Fuel Canisters to Mitigate and Repair Potential Stress Corrosion Cracking (FY22 Status)

This report summarizes the activities performed by Sandia National Laboratories in FY22 to identify and test coating materials for the prevention, mitigation, and/or repair of potential chloride-induced stress corrosion cracking in spent nuclear fuel dry storage canisters. This work continues efforts by Sandia National Laboratories that are summarized in previous reports in FY20 and FY21 on the same topic. The previous work detailed the specific coating properties desired for application and implementation to spent nuclear fuel canisters (FY20) and identified several potential coatings for evaluation (FY21). In FY22, Sandia National Laboratories, in collaboration with four industry partners through a Memorandum of Understanding, started evaluating the physical, mechanical, and corrosion-resistance properties of 6 different coating systems (11 total coating variants) to develop a baseline understanding of the viability of each coating type for use to prevent, mitigate, and/or repair potential stress corrosion on cracking on spent nuclear fuel canisters. This collaborative R&D program leverages the analytical and laboratory capabilities at Sandia National Laboratories and the material design and synthesis capabilities of the industry collaborators. The coating systems include organic (polyetherketoneketone, modified polyimide/polyurea, modified phenolic resin), organic/inorganic ceramic hybrids (silane-based polyurethane hybrid and a quasi-ceramic sol-gel polyurethane hybrid), and hybrid systems in conjuncture with a Zn-rich primer. These coatings were applied to stainless steel coupons (the same coupons were supplied to all vendors by SNL for direct comparison) and have undergone several physical, mechanical, and electrochemical tests. The results and implications of these tests are summarized in this report. These analyses will be used to identify the most effective coatings for potential use on spent nuclear fuel dry storage canisters, and also to identify specific needs for further optimization of coating technologies for their application on spent nuclear fuel canisters. In FY22, Sandia National Laboratories performed baseline testing and atmospheric exposure tests of the coating samples supplied by the vendors in accordance with the scope of work defined in the Memorandum of Understanding. In FY23, Sandia National Laboratories will continue evaluating coating performance with a focus on thermal and radiolytic stability.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Modeling the Moisture Content and Dry Matter Loss in Dynamic Woody Biomass Storage Piles with Variable Extraction

The urgent need to mitigate climate change has spurred significant interest in renewable energy sources. This paper explores the storage and processing of woody biomass for biofuel production, considering the dynamic nature of biomass piles in real-world scenarios. A model has been developed to analyze moisture content changes and dry matter loss in woody biomass stored in piles prior to processing, taking into account varying extraction methods and environmental conditions. Case studies that examine the effects of different unpiling methods (FIFO, LIFO, and homogeneous) on moisture content and dry matter loss under various feedstock arrival rates and weather conditions are presented. Results indicate that unpiling methods significantly impact moisture content, with LIFO typically resulting in higher moisture content due to the utilization of fresher feedstock. Dry matter loss increases with pile size and time, emphasizing the importance of accurate modeling for assessing carbon emissions and feedstock quality. Furthermore, the model highlights the importance of process loading order and extraction methods in biomass storage, suggesting potential cost benefits associated with decreased moisture content. The difference between different extraction methods could vary the moisture content in the feedstock reaching the biofuel process by as much as 37.6%, however dry matter loss varies minimally for realistic pile changes. Overall, this research contributes to a better understanding of biomass storage dynamics and informs sustainable biofuel production practices.

Niska, Janel↗
DOE OSTI2022

Parameterizing Convective Organization Effects With a Moisture-PDF Approach in Climate Models: Concept and a Regional Case Simulation

We propose a parameterization scheme of convective organization effects based on a moisture-distribution approach, which can reflect aggregation of convective cells within a model grid as well as the interaction between convection and spatial heterogeneity in free-troposphere moisture. With this concept, convective cells in an aggregated state are surrounded by air that is moister than the grid-mean condition, which provides a “shielding” effect favorable for deeper convective updrafts. Such effects are represented quantitatively via utilizing a schematic diagram about the geometric interpretation of convective cluster, dry area, and their contact area, in which both the convective cluster size and dry area fraction increase during the development of convection. Our sensitivity analyses indicate that the new scheme performs well in capturing the mean precipitation features. Excluding the convective organization effects in the model leads to a considerable reduction in the simulated precipitation magnitude. Notably, there exists an inverse relationship between background mean moisture condition and sub-grid moisture variability for a given rain rate, suggesting that with a high spatial heterogeneity in free-troposphere moisture, convection can still develop and maintain its strength under relatively dry background conditions, consistent with the convection-permitting model simulation. Overall, our new parameterization of convective organization effects can successfully reproduce the relationship between precipitation and sub-grid moisture variability, which is a missing element in traditional convection parameterization schemes but important for the simulations of precipitation variability at various scales in climate models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Functional succession of actively growing soil microorganisms during rewetting is shaped by precipitation history

Rewetting of seasonally dry soils induces a burst of microbial activity and carbon mineralization that changes nutrient availability and leads to succession. Yet the microbial functions that underpin this succession are not well described. Further, it’s unclear how previous precipitation frames microbial capacities after rewetting and how long these effects persist. We used isotopically-labeled water to rewet seasonally dry annual grassland soil that experienced either mean annual or reduced precipitation during the previous two years, and sampled at five subsequent time points. We used quantitative stable isotope probing (qSIP)-informed genome- resolved metagenomics to identify growing microorganisms, predict their capabilities, and analyze how these traits differed over time and between precipitation treatments. Organisms that grew after wetup were more abundant than non-growing organisms prior to the wet-up, suggesting that traits that initiate succession are pre-defined at the end of the prior plant growing season or via survival over the summer. Fast-growing organisms had fewer carbohydrate active enzyme (CAZy) genes per genome than slower-growing organisms, suggesting that although fast-growers were capable of degrading complex C, they may not specialize in this process. Differential abundance of CAZy genes in growing organisms throughout the succession implies that substrate availability varied with time. In contrast, the abundance of peptidases in growing organisms differed between precipitation treatments, but not over time following wet-up. Before wet-up, the soil organisms’ gene inventories were different between the two precipitation treatments. Surprisingly, this legacy effect waned after just one week. Thus, pre-wetup differences in microbial functional capacity converged shortly after rewetting.

Sieradzki, E T↗
DOE OSTI2022

Quaternized chitosan as a biopolymer sanitizer for leafy vegetables: synthesis, characteristics, and traditional vs. dry nano-aerosol applications

A series of quaternary dimethyl-(alkyl)-ammonium chitosan derivatives (QACs) was synthesized and studied for physicochemical properties and bioactivity. The QACs tended to spontaneously self-assembly into nanoaggregates. Antimicrobial activity was examined in vitro on Gram-negative Escherichia coli (E. coli) and Gram-positive Listeria innocua (L. innocua) bacteria as well as phytopathogenic fungus Botrytis cinerea. The hexyl chain-substituted QAC-6 demonstrated the highest potency causing 3.0- and 4.5-log CFU mL-1 reduction of E. coli and L. innocua, respectively. QAC-6 was tested for antimicrobial activity on stainless steel coupons and fresh spinach leaves. A traditional ‘wet’ application (spray) and dry Engineered Water Nanostructure (EWNS) approach were used for spinach decontamination. With both approaches, significant reduction of microbial load on the treated produce was achieved. Finally, the wet application showed a greater reduction of microbial load, while the advantages of EWNS were reaching the antimicrobial effect with miniscule dose of active agent leaving treated surface visibly dry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Different model assumptions about plant hydraulics and photosynthetic temperature acclimation yield diverging implications for tropical forest gross primary production under warming

Tropical forest photosynthesis can decline at high temperatures due to (1) biochemical responses to increasing temperature and (2) stomatal responses to increasing vapor pressure deficit (VPD), which is associated with increasing temperature. It is challenging to disentangle the influence of these two mechanisms on photosynthesis in observations, because temperature and VPD are tightly correlated in tropical forests. Nonetheless, quantifying the relative strength of these two mechanisms is essential for understanding how tropical gross primary production (GPP) will respond to climate change, because increasing atmospheric CO 2 concentration may partially offset VPD-driven stomatal responses, but is not expected to mitigate the effects of temperature-driven biochemical responses. We used two terrestrial biosphere models to quantify how physiological process assumptions (photosynthetic temperature acclimation and plant hydraulic stress) and functional traits (e.g., maximum xylem conductivity) influence the relative strength of modeled temperature versus VPD effects on light-saturated GPP at an Amazonian forest site, a seasonally dry tropical forest site, and an experimental tropical forest mesocosm. By simulating idealized climate change scenarios, we quantified the divergence in GPP predictions under model configurations with stronger VPD effects compared with stronger direct temperature effects. Assumptions consistent with stronger direct temperature effects resulted in larger GPP declines under warming, while assumptions consistent with stronger VPD effects resulted in more resilient GPP under warming. Furthermore, our findings underscore the importance of quantifying the role of direct temperature and indirect VPD effects for projecting the resilience of tropical forests in the future, and demonstrate that the relative strength of temperature versus VPD effects in models is highly sensitive to plant functional parameters and structural assumptions about photosynthetic temperature acclimation and plant hydraulics.

54 ENVIRONMENTAL SCIENCES↗