Search NASA⌕ Search

SEARCH · Search NASA

Results for “edge instability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

The FU Orionis Outburst as a Thermal Disk Accretion Event: Detailed Calculations and Comparison to Observations

FU Orionis outbursts are temporary large increases in luminosity: x(40-250) thought to occur repeatedly in all low mass young stellar systems. We discuss detailed calculations of viscous accretion disks suggesting that FU Ori events signify the existence of a protostellar disk transporting mass at a rate of (1-10) x 10(exp -6) Solar Mass/yr, in agreement with theoretical and observational estimates of molecular cloud core collapse rates. Accretion through the inner edge of disks subject to outburst is self-regulated through the thermal ionization instability such that long periods (approximately 1000 yrs) of low mass flux: (1-10) x 10(exp -8) Solar Mass/yr, are punctuated by short periods (approximately 100 yrs) of high mass flux: (1-10) x 10(exp -5) Solar Mass/yr. The unstable region of the disk extends radially only to a distance of approximately 1/4 AU. Beyond this region matter is transported stably at the infall rate. In systems for which M = 1 Solar Mass, with an inner disk edge of 3 Solar Radius, the critical rate for outbursts is 5 x 10(exp -7) Solar Mass/yr independent of the magnitude of the viscous alpha parameter consistent with estimates of boundary layer mass flux in T Tauri stars. We use timescales of observed outbursts to constrain the magnitude of the alpha parameter to be 10(exp -4) where hydrogen is neutral and 10(exp -3) where ionized. Light curves of V1515 Cyg, FU Ori, and V1057 Cyg are reproduced; the latter two require application of a small perturbation in surface density to produce observed rapid rise times. Detailed reply is made to objections to the accretion disk model for outbursts. Comparison to observations are made of time dependent spectral energy distributions, colors, and line-width velocity evolution.

Bell, K. R.↗
NASA NTRS2021

Kozai–Lidov Oscillations Triggered by a Tilt Instability of Detached Circumplanetary Discs

Circumplanetary discs can be linearly unstable to the growth of disc tilt in the tidal potential of the star–planet system. We use3D hydrodynamical simulations to characterize the disc conditions needed for instability, together with its long-term evolution.Tilt growth occurs for disc aspect ratios, evaluated near the disc outer edge, ofH/r0.05, with a weak dependence on viscosityin the wave-like regime of warp propagation. Lower mass giant planets are more likely to have circumplanetary discs thatsatisfy the conditions for instability. We show that the tilt instability can excite the inclination to above the threshold where thecircumplanetary disc becomes unstable to Kozai–Lidov (KL) oscillations. Dissipation in the KL unstable regime caps furthertilt growth, but the disc experiences large oscillations in both inclination and eccentricity. Planetary accretion occurs in episodicaccretion events. We discuss implications of the joint tilt–KL instability for the detectability of circumplanetary discs, for theobliquity evolution of forming giant planets, and for the formation of satellite systems.

Rebecca G Martin↗
NASA NTRS1981

On eigensolutions for discontinuous liners in a duct containing uniform mean flow

Sound attenuation in a rectangular acoustically lined duct containing uniform mean flow is analytically investigated using the generalized Wiener-Hopf technique. Uniqueness of the solution is enforced for lined sections of the finite axial extent by imposing edge conditions at the liner interface. Possible edge conditions are considered, including the Kutta condition, and the causal solution corresponding to edge conditions is considered the best choice. Solution methods such as the mode matching and singularity methods imply differing edge conditions, and results show that power attenuation is insensitive to the imposed edge conditions, although significant differences are observed for the reflection coefficient. The amplitude of the exponentially increasing instability mode in the lined section must be set to zero as a first approximation to the nonlinear situation, and results indicate that measurements of the reflection factor can be used to make a more definite decision about physically appropriate edge conditions.

Koch, W.↗
NASA NTRS1994

The FU Orionis Outburst as a Thermal Disk Accretion Event: Detailed Calculations and Comparison to Observations

FU Orionis outbursts are temporary large increases in luminosity: x (40 - 250) thought to occur repeatedly in all low mass young stellar systems. We discuss detailed calculations of viscous accretion disks suggesting that FU Ori events signify the existence of a protostellar disk transporting mass at a rate of (1 - 10) x 10(exp 6) solar mass / yr, in agreement with theoretical and observational estimates of molecular cloud core collapse rates. Accretion through the inner edge of disks subject to outburst is self-regulated through the thermal ionization instability such that long periods (approx. 1000 yrs) of low mass flux: (1 - 10) x 10(exp -5) solar mass / yr, are punctuated by short periods (approx. 100 yrs) of high mass flux: (1-10) x 10(exp -5) solar mass / yr. The unstable region of the disk extends radially only to a distance of approx. = 1/4 AU. Beyond this region matter is transported stably at the infall rate. In systems for which M(sum *) = 1 solar mass with an inner disk edge of 3 solar radius, the critical rate for outbursts is 5 x 10(exp -7) solar mass / yr independent of the magnitude of the viscous ce parameter consistent with estimates of boundary layer mass flux in T Tauri stars. We use timescales of observed outbursts to constrain the magnitude of the alpha parameter to be 10(exp -4) where hydrogen is neutral and 10(exp -3) where ionized. Light curves of V1515 Cyg, FU Ori, and V1057 Cya are reproduced; the latter two require application of a small perturbation in surface density to produce observed rapid rise times. Detailed reply is made to objections to the accretion disk model for outbursts. Comparison to observations are made of time dependent spectral energy distributions, colors, and line-width velocity evolution.

Bell, K. R.↗
DOE OSTI2024

Krash-ESL-Final report

During the period of the current Grant, the effort of the UCSD researchers was focused on: i) The application of the gyrokinetic code COGENT code to study the kinetic drift wave instability and its impact on blob dynamics, and ii) The modeling of edge plasma transport in collisional and semi-collisional regimes, and iii) Impurity transport in edge plasma and the incorporation of plasma-impurity collision operator (hereafter unlike particle collision operator) into COGENT. Over the years four UCSD graduate students (J. Angus, W. Lee, Y. Zhang, and A. Knyazev), funded under this Grant, contributed to the COGENT development/utilization and defended their PhD theses, which are based, partly, on their research related to the COGENT. Three of them (J. Angus, W. Lee, and Y. Zhang) have received “The Best MAE Graduate Student of the Year” awards. Whereas W. Lee after defending his PhD thesis returned back to his home country (South Korea), J. Angus, and Y. Zhang are continuing their research in plasma physics in the LLNL and LANL, whereas A. Knyazev currently is a postdoctoral fellow at Columbia University working on the theoretical aspects of advanced stellarators. The results obtained in our studies were disseminated in many papers published in first-class refereed scientific journals and presented on prestigious scientific meetings including the Annual APS DPP Meeting, Sherwood Fusion Theory Conference, IAEA Fusion Energy Conferences, International Conferences on Plasma-Surface Interactions in Controlled Fusion Devices, International Workshops on Edge Plasma Theory in Fusion Devices, etc. In what follows we highlight the major accomplishments of the UCSD Team in the main areas of our research.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1992

In-flight detection of flow separation, stagnation, and transition

Flight tests were conducted to demonstrate the feasibility of simultaneous determination of: (1) boundary-layer instability and transition characteristics; (2) flow separation region; and (3) the location of the leading-edge stagnation point. Surface mounted, multi-element, micro-thin, hot-film sensors were used in conjunction with a bank of constant-temperature anemometers and a PC-based 8-channel simultaneous data acquisition system. Conventional techniques were used to determine the boundary-layer instability and transition characteristics while the flow separation and the stagnation points were determined through the presence of phase reversal signatures.

Mangalam, S. M.↗
NASA NTRS1975

Trailing edge noise

Shadowgraphic observations of the flow structure of a wall jet downstream of the trailing edge of a flat plate were carried out. Shadowgraphs obtained at jet exit Mach number 0.3 to 0.8 consistently showed an orderly large oscillatory flow structure. It is believed that these large scale disturbances are the result of flow instabilities. It is also believed that these orderly disturbances are responsible for generating the dominant part of trailing edge noise either directly or indirectly. The interaction of sound generated by these coherent oscillatory flow disturbances and the plate was investigated theoretically. It is found that the farfield noise directivity is strongly influenced by diffraction of sound at the leading edge of the plate.

Tam, C. K. W.↗
NASA NTRS1992

The stability of the near-Earth magnetotail against the ballooning instability

In an extension to a previous study, conditions for the ballooning instability in the magnetohydrodynamic approximation are derived. It is necessary for exciting the ballooning instability that the plasma pressure is higher where plasma is convected outward. However, the expansion of plasma, which results from the divergence of outward flows in the curved geometry of field lines, may overcompensate for the convective change in the plasma pressure. Conditions for the instability are derived from the equation describing the linear coupling between the Alfven and slow magnetosonic waves. The result indicates that excessive curvature stabilizes, rather than destabilizes, perturbations, as well as the field aligned current and the field aligned flow. That is the field line curvature should be smaller than the pressure gradient for exciting the ballooning instability. It is inferred that this condition is not satisfied during quiet times in the near Earth tail. The plasma sheet becomes more stable to the instability in accordance with the thinning of the plasma sheets during the growth phase of substorms, while in the region nearer to the Earth (the inner edge of the plasma sheet or the ring current region) the plasma pressure gradient, which is possibly localized during the growth phase, may drive the instability.

Ohtani, Shin-Ichi↗
DOE OSTI2024

Tearing Stable Stationary ITER Baseline Operation in DIII-D

We present a tearing stable, stationary and reproducible operating solution for DIII-D plasmas characterized by the ITER Baseline Scenario normalized parameter set and shape. In these plasmas low differential rotation (Δf1,2) between the core and edge is identified as the single root cause of the onset of the primary limiting instability, the 2,1 Neoclassical Tearing Mode (NTM), while a group of other examined parameters have a much weaker impact on the stability. Explanation is offered by drift kinetic simulations, which show a six-fold reduction in the NTM onset threshold due to diminished stabilizing ion polarization currents when the seed island drift frequency ceases in the local plasma frame. Based on the experimental observation and the explanation provided by the theory, a new method is developed to sustain Δf1,2 by modifying the edge neoclassical potential through neutral gas fueling. This method enables stationary ITER baseline operation free of disruptive 2,1 tearing modes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS2003

Mechanisms of Rotating Instability in Axial Compressors Investigated

Rotating instability is a phenomenon that occurs in the tip flow region of axial compressor stages during stable operation. It can be observed in highly staggered rotors with significant tip clearance and is strongest at high-load operating points where the characteristic levels off. In this condition, the single-stage fan under investigation radiates an audible, whistling tone, and wall pressure spectra in the vicinity of the rotor disk exhibit nonrotational components. The graph shows the spectrum of static pressure at a point on the endwall near the leading edge. A hump appears at roughly half of the blade passing frequency (BPF) and is characteristic of rotating instability. A computational model was developed at the NASA Glenn Research Center to investigate the mechanism behind this phenomenon. A three-dimensional steady Navier-Stokes code that has been successfully tested for a wide range of turbomachinery flows was modified to execute a time-accurate simulation of the full annulus of the compressor. At the inlet of the computational domain, the total pressure, total temperature, and two velocity components are specified. Since no unsteady measurements of static pressure or other flow variables were available downstream of the rotor, circumferentially averaged static pressure was specified on the shroud at the outlet of the computational domain. A three-dimensional view of the vortex from the numerical model is shown. Particle traces released near the leading edge tip have rolled up to illustrate the tip clearance vortex. Flow near the trailing edge is pushed forward by the axially reversed flow. It then interacts with the tip clearance flow and the incoming flow and results in the rotating instability vortex, the core of which is illustrated by total pressure shading on planes located successively downstream. The rotating instability vortex is formed periodically midway between the blades and moves toward the pressure side of the passage. The unsteady behavior of this vortex structure is the main mechanism of the rotating instability is shown. The numerical model can be used to detect any possible occurrence of rotating instability when the tip clearance increases during engine service.

Hah, Chunill↗
NASA NTRSDate not supplied

The Generation of Mixing Across the Stratospheric Polarvortex Edge By Breaking Gravity Waves

Modern high resolution global atmospheric analyses are capable of resolving larger gravity waves, including their generation, propagation, and breaking. Orographically generated gravity waves that break in the middle stratosphere often appear as disturbances in maps of potential vorticity, a key stratospheric dynamical quantity. Using analyses from the NASA Global Modeling and Assimilation Office, we show how gravity waves not only disturb the local flow above them but can generate flow instabilities leading to eddies that propagate around the stratospheric polar vortex, creating significant mixing across the vortex edge and into the polar region. These disturbances and mixing events are especially noticeable during NH winter months with low planetary scale wave activity such as in January 2022. During January 2022, the initially circular flow around the polar vortex was disrupted by breaking gravity waves, leading to unstable flow that created a chain of eddies around the vortex edge. The mixing associated with this process led to increased ozone in the upper stratosphere polar region.

Polar Vortex↗
DOE OSTI2023

Observation of impurity accumulation and its compatibility with high plasma performance in W7-X

At the W7-X stellarator, the bolometer system has measured an intensive radiation zone in the inner plasma region (at a normalized radius $ρ$ ~ 0.3–0.4) in the hydrogen plasma generated by electron cyclotron resonance heating; it differs from the normal plasma radiation distribution with an edge-localized emission zone. Spectroscopic diagnostics have recorded high-Z elements such as iron. This phenomenon happens in the plasma phases after gas supply turn-off, which results in all impurity relevant diagnostic signals increasing for several seconds. Despite the enhancement of the core radiation, the plasma energy confinement is improved. A transport analysis shows that this impurity radiation behavior is associated with a low diffusion coefficient ($D$~ 0.02 m 2 s -1 ) and a reversal of the convection around the radial position of the emission peak, which, under normal conditions, separates the zones of outward convection in the central (|$V$| ~ 0.1 m s -1 ) and inward convection in the outer region (|$V$| ~ 0.3 m s -1 ). An impurity accumulation around this radial position has been identified. The transport coefficients obtained are comparable with the theoretical predictions of collisional impurity transport. In the plasma phases studied, both impurity and energy confinement are enhanced. The mechanism responsible for the improvement is believed to be a reduction of micro-instabilities associated with the observed steepening of the density profile, initiated by a low edge plasma density (<1.0 × 10 19 m -3 ) after switching off the gas fueling. The normalized temperature and density gradients fulfil the condition for the suppression of ITG turbulence.

suppression of ITG turbulence↗
DOE OSTI2026

Effects of density turbulence on helicon wave propagation in the core plasmas

Radio frequency wave propagation can be significantly affected by density irregularities, such as filaments in the scrape-off layer or instabilities in the core plasma. In this study, we examine the impact of edge turbulence on helicon wave propagation using the Petra-M simulation tool. To analyze the effect of edge turbulence, we utilize a realistic background plasma derived from XGC simulations, which includes spatial density fluctuations at the edge. This focus is particularly relevant for the DIII-D configuration, characterized by edge density turbulence of the core plasmas in a wide pedestal QH-mode. We focus on helicon wave propagation in the core plasma since the slow mode cannot propagate into the core plasma when the density is higher than the lower hybrid resonance, where a wide pedestal QH-mode occurs. The simulation results indicate that edge density fluctuations have a substantial impact on helicon wave coupling due to scattering in the core. We specifically demonstrate that the toroidal mode number and the level of density fluctuations are significant factors influencing scattering. While we have minimized the excitation of slow modes from the antenna, we still observe mode-converted slow modes resulting from the incoming helicon waves. The insights derived from these simulations will inform upcoming tokamak experiments regarding helicon antenna coupling in long pulse scenarios.

Kim, Eun-Hwa [Princeton Plasma Physics Laboratory ↗
DOE OSTI2021

Investigations of LHW-plasma coupling and current drive at high density related to H-mode experiments in EAST

Two important issues in achieving lower hybrid current drive (LHCD) high confinement plasma in EAST are to improve lower hybrid wave (LHW)-plasma coupling and to drive the plasma current at a high density. Studies in different configurations with different directions of toroidal magnetic field (Bt) show that the density near the antenna is affected by both the radial electric field induced by plasma without a LHW (Er-plasma) in the scrape off layer (SOL), and the radial electric field induced by LHW power (Er-LH) near the grill. Investigations indicate that Er× Btin the SOL leads to a different effect of configuration on the LHW-plasma coupling and Er-LH× Btaccounts for the asymmetric density behaviour in the SOL observed in the experiments, where Eris the total radial electric field in the SOL. Modelling of parametric instability (PI), collisional absorption (CA) and scattering from density fluctuations (SDF) in the edge region, performed considering the parameters of high density LHCD experiments in EAST, has shown that these mechanisms could be responsible for the low current drive (CD) efficiency at high density. Radiofrequency probe spectra, useful for documenting PI occurrence, show sidebands whose amplitude in the case of the lithiated vacuum chamber is smaller than in the case of poor lithiation, consistently with growth rates from PI modeling of the respective reference discharges. Since strong lithiation is also expected to diminish the parasitic effect on the LHCD of the remaining possible mechanisms, this appears to be a useful method for improving LHCD efficiency at a high density.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1980

Transmitted sound field due to an impulsive line acoustic source bounded by a plate followed by a vortex sheet

The propagation of sound due to a line acoustic source in the moving stream across a semiinfinite vortex sheet which trails from a rigid plate is examined in a linear theory for the subsonic case. A solution for the transmitted sound field is obtained with the aid of multiple integral transforms and the Wiener-Hopf technique for both the steady state (time harmonic) and initial value (impulsive source) situations. The contour of inverse transform and hence the decomposition of the functions are determined through causality and radiation conditions. The solution obtained satisfies causality and the full Kutta conditions. The transmitted sound field is composed of two waves in both the stady state and initial value problems. One is the wave scattered from the edge of the plate which is associated with the bow wave and the instability wave. These waves exist in the downstream sectors. The other is the wave transmitted through the vortex sheet which is also associated with the instability wave. Regional divisions of the transmitted sound field are identified.

Miura, T.↗
NASA NTRS1987

Experimental studies on Goertler vortices

Goertler vortices arise in laminar boundary layers along concave walls due to an imbalance between pressure and centrifugal forces. In advanced laminar-flow control (LFC) supercritical airfoil designs, boundary-layer suction is primarily used to control Tollmien-Schlichting instability and cross-flow vortices in the concave region near the leading edge of the airfoil lower surface. The concave region itself is comprised of a number of linear segments positioned to limit the total growth of Goertler vortices. Such an approach is based on physical reasonings but rigorous theoretical justification or experimental evidence to support such an approach does not exist. An experimental project was initiated at NASA Langley to verify this concept. In the first phase of the project an experiment was conducted on an airfoil whose concave region has a continuous curvature distribution. Some results of this experiment were previously reported and significant features are summarized.

Mangalam, Siva M.↗
NASA NTRSDate not supplied

Supersonic Traveling Crossflow Wave Characteristics in Ground and Flight Tests

This paper continues analysis of data acquired in a series of supersonic crossflow transition experiments on a 65° swept- wing model tested in both wind tunnel and flight. Flow visualization data are summarized to provide context for the swept-wing instability mechanisms of interest. Unsteady pressure measurements obtained near the wing model leading edge (LE) are studied using 2nd- and 3rd-order statistical methods to extract traveling crossflow wave characteristics from these data. Comparisons between tunnel and flight data with boundary-layer (BL) Linear Stability Theory (LST) predictions provide insights into BL transition phenomena similarities and differences observed in tests using the same swept-wing model configurations. Comparisons of unsteady pressure data results for wing LE configurations with and without distributed-roughness-element (DRE) patterns installed, suggest traveling crossflow disturbance growth is reduced when this type of flow control is applied. A brief stud y of different background surface roughness levels on the wing LE suggests the potential for another flow control approach to promote laminar flow on swept wings using streamwise-biased surface finishes.

Lewis R Owens↗
DOE OSTI2022

Energizing charged particles by an orbit instability in a slowly rotating magnetic field

In this work, the stability of charged particle motion in a uniform magnetic field with an added spatially uniform transverse rotating magnetic field (RMF) is studied analytically. It is found that the stability diagram of a single particle's orbit depends critically on the chosen boundary conditions. We show that for many boundary conditions and wide regions in the parameter space, RMFs oscillating far below the cyclotron frequency can cause linear instabilities in the motion which break μ invariance and energize particles. Such energization may appear at odds with the adiabatic invariance of μ; however, adiabatic invariance is an asymptotic result and does not preclude such heating by magnetic fields oscillating at slow frequencies. This mechanism may contribute to heating in the edge plasma of field-reversed configurations (FRCs) in rotamak-FRC experiments. Furthermore, these RMF-driven instabilities may significantly enhance azimuthal current drive during the formation of FRCs in such devices.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗