Search NASA⌕ Search

SEARCH · Search NASA

Results for “edge stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

On the origin of the DIII-D L-H power threshold isotope effect

Abstract The increased low to high confinement mode (L to H-mode) power threshold P L H in DIII-D low collisionality hydrogen plasmas (compared to deuterium) is shown to result from lower impurity (carbon) content, consistent with reduced (mass-dependent) physical and chemical sputtering of graphite. Trapped gyro-Landau fluid (TGLF) quasilinear calculations and local non-linear gyrokinetic CGYRO simulations confirm stabilization of ion temperature gradient (ITG) driven turbulence by increased carbon ion dilution as the most important isotope effect. In the plasma edge, electron non-adiabaticity is also predicted to contribute to the isotope dependence of thermal transport and P L H , however its effect is subdominant compared to changes from impurity isotopic behavior. This L-H power threshold reduction with increasing carbon content at low collisionality is in stark contrast to high collisionality results, where additional impurity content appears to increase the power necessary for H-mode access.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Hierarchical Power Flow Control in Smart Grids: Enhancing Rotor Angle and Frequency Stability with Demand-Side Flexibility

Large-scale integration of renewables in power systems gives rise to new challenges for keeping synchronization and frequency stability in volatile and uncertain power flow states. To ensure the safety of operation, the system must maintain adequate disturbance rejection capability at the time scales of both rotor angle and system frequency dynamics. This calls for flexibility to be exploited on both the generation and demand sides, compensating volatility and ensuring stability at the two separate time scales. This article proposes a hierarchical power flow control architecture that involves both transmission and distribution networks as well as individual buildings to enhance both small-signal rotor angle stability and frequency stability of the transmission network. The proposed architecture consists of a transmission-level optimizer enhancing system damping ratios, a distribution-level controller following transmission commands and providing frequency support, and a building-level scheduler accounting for quality of service and following the distribution-level targets. Furthermore, we validate the feasibility and performance of the whole control architecture through real-time hardware-in-loop tests involving real-world transmission and distribution network models along with real devices at the Stone Edge Farm Microgrid.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2022

Tuning Intermediate Bands of Protective Coatings to Reach the Bulk-Recombination Limit of Stable Water-Oxidation GaP Photoanodes

Stable photoelectrochemical solar fuel production requires protective coatings to achieve effective charge separation, transport, and injection at the semiconductor–liquid interfaces, implying that the coating should energetically align its intermediate band (IB) with both the photoabsorber's band edge and co-catalyst's potentials. Yet approaches to adjust coating IB positions to accommodate various semiconductor light absorbers for constructing efficient and stable photoelectrodes have not been developed. In this report, three types of transition metal (M = Mn 2+ , Mn 3+ , and Cr 3+ ions) alloyed TiO2 coatings are discovered using atomic layer deposition (ALD). The IB energetics of these coatings are characterized by X-ray photoelectron spectroscopy and are found to be tunable inside the TiO 2 bandgap, through varying ALD growth conditions. By applying these coatings to n-type GaP and integrating with IrO x co-catalysts, the water-oxidation J–E performance is comparable to an uncoated corroding GaP photoanode. It reaches the bulk recombination limit of the GaP and achieves ≈28% absorbed photon to current efficiency under 475-nm light excitation (6.48 mW cm -2 ) and 100-h stable water oxidation. The outstanding performance and stability are attributed to the efficient charge separation and hole transport, as allowed by the energy alignment of the coating IB and the GaP valence band edge.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Novel 3D Cubic Topology in Hybrid Lead Halides with a Symmetric Aromatic Triammonium Exhibiting Water Stability

The limitations of three-dimensional (3D) perovskites are related to their narrow structural tunability of the organic cations and their moisture sensitivity. Herein, we report a new family of 3D cubic hybrid metal halides (T-Et 6 ) 3 Pb 11 X 31 (X = I, Br), where T is 1,3,5-tris-(4-aminophenyl)benzene. The materials are synthesized through an in situ N-alkylation of T and an efficient one-step solvothermal reaction containing ethanol, initiating a tunable synthetic avenue for the acquisition of structurally complex hybrid halides with luminophores. (T-Et 6 ) 3 Pb 11 X 31 consist of an unprecedented Ia3̅ framework of [Pb 11 X 31 ] 9– one-dimensional (1D) chains embedded with (T-Et 6 ) 3+ cations, affording an overall 3D topology. Here, the constituent [Pb 11 X 31 ] 9– chains include exclusively octahedral lead halide units with clusters of face- and edge-sharing connectivity, giving rise to weak broad emission centered at ~660 nm observed at 78 K. (T-Et 6 ) 3 Pb 11 I 31 demonstrates water stability for at least 7 days. Synthesis through ambient pressure results in tunable structural variations of zero-dimensional (0D) structures rendering T 7 Pb 3 Br 27 ·DMF and T 2 Sn 3 Br 18 ·4H 2 O·0.5Br 2 , both of which feature blue PL emission at room temperature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Resistive wall mode stability and resonant field amplification in MAST high beta plasma

The n=1 (n is the toroidal mode number) resistive wall mode (RWM) instability and the resonant field amplification (RFA) due to a stable RWM response are numerically investigated for a MAST high-pressure plasma scenario, utilizing the MARS-F (Liu Y.Q. et al 2000 Phys. Plasmas 7 3681) and MARS-K (Liu Y.Q. et al 2008 Phys. Plasmas 15 112503) codes, for the purpose of understanding the potential RWM behavior in MAST-U plasmas. Ideal kink stability analysis identifies a target plasma, with parameters similar to that of the reference equilibrium reconstructed from a MAST high-pressure discharge, that accesses the RWM regime. The unstable n=1 RWM for the target equilibrium is subject to strong damping by the plasma toroidal flow and/or the drift kinetic effects from thermal particles. As a result, the mode is found to be stable under the experimental flow conditions, or even without flow stabilization if drift kinetic stabilization is included. The stability prediction is robust against variation of the assumed resistive wall minor radius. Active magneto-hydrodynamic (MHD) spectroscopy modeling, using the magnetic coils designed for controlling the edge localized modes (ELMs) in MAST-U as the antenna, shows strong resonant field amplification due to a stable RWM response in the target plasma. Maximal amplification, of 6-7 times larger than the applied vacuum field within the plasma, is obtained assuming a coil phasing of 120-180 degrees between the upper and lower rows of the ELM control coils. The MHD-kinetic hybrid model predicts generally higher RFA than the fluid model, in particular near the low-field and high-field sides of the plasma boundary surface. Furthermore, the MARS-F/K modeling thus shows that the RWM in MAST-U is subject to strong flow and kinetic stabilization, but can nevertheless be detected by active MHD spectroscopy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

3D simulations of spinlike flames in Co/Al multilayers with enhanced conduction losses

Reactive Co/Al multilayers are uniformly structured materials that may be ignited to produce rapid and localized heating. Prior studies varying the bilayer thickness (i.e., sum of two individual layers of Co and Al) have revealed different types of flame morphologies, including: (a) steady/planar, (b) wavy/periodic, and (c) transverse bands, originating in the flame front. These instabilities resemble the “spin waves” first observed in the early studies of solid combustion (i.e., Ti cylinder in a N 2 atmosphere), and are likewise thought to be due to the balance of heat released by reaction and heat conduction forward into the unreacted multilayer. However, the multilayer geometry and three-dimensional (3D) edge effects are relatively unexplored. In this work, a new diffusion-limited reaction model for Co/Al multilayers was implemented in large, novel 3D finite element analysis (FEA) simulations, in order to study the origins of these spinlike flames. This reaction model builds upon previous work by introducing three new phase-dependent property models for: (1) the diffusion coefficient, (2) anisotropic thermal conductivity tensor, and (3) bulk heat capacity, as well as one additional model for the bilayer-dependent heat of reaction. These novel 3D simulations are the first to predict both steady and unsteady flames in Co/Al multilayers. Moreover, two unsteady modes of flame propagation are identified, which depend on the enhanced conduction losses with slower flames, as well as flame propagation around notched edges. Finally, future work will consider the generality of the current modeling approach and also seek to define a more generalized set of stability criteria for additional multilayer systems.

42 ENGINEERING↗
DOE OSTI2023

Role of Curvature in Stabilizing Boron-Doped Nanocorrugated Graphene

Boron-doped carbon nanostructures have attracted great interest recently because of their remarkable electrocatalytic performance comparable to or better than that of conventional metal catalysts. In a previous work (Carbon 123, 605 (2017)), we reported that along with significant performance improvement, B doping enhances the oxidation resistance of few-layer graphene (FLG) that provides increased structural stability for intermediate-temperature fuel-cell electrodes. In general, detailed characterization of the atomic and electronic structure transformations that occur in B-doped carbon nanostructures during fuel-cell operation is lacking. In this work, we use aberration-corrected scanning transmission electron microscopy, nanobeam electron diffraction, and electron energy-loss spectroscopy (EELS) to characterize the atomic and electronic structures of B-doped FLG before and after fuel-cell operation. These data point to the nanoscale corrugation of B-doped FLGs as the key factor responsible for increased stability and high corrosion resistance. In conclusion, the similarity of the 1s to π* and σ* transition features in the B K-edge EELS to those in B-doped carbon nanotubes provides an estimate for the curvature of nanocorrugation in B-FLG.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

A fluid-structure interaction solver for investigating torsional galloping in solar-tracking photovoltaic panel arrays

Solar-tracking photovoltaic arrays are susceptible to aeroelastic fluttering during high-wind events. This dynamic fluttering behavior can grow in amplitude until the panels enter an unstable mode known as torsional galloping which can lead to panel failure or total array destruction. To better understand the physics of the torsional galloping phenomenon and to inform the discussion around panel design and recommended panel stow positions during high wind events, a fluid-structure interaction solver composed of a simulated atmospheric boundary layer with simplified panel structural responses was designed. The simulation choices and features of this solver were informed by the geometry and physical properties of an experimental panel array known to exhibit torsional galloping behavior during hind-wind events. Furthermore, these simulations revealed that the torsional galloping instability is driven by a combination of cyclic vortex shedding from the sun-facing side of the panel and the elastic properties of the torque tube linking the panel assemblies. Testing different stow angles across a range of wind speeds indicates that panels are generally more stable when stowed at negative angles where the leading edge is closer to the ground, hypothesized to be due to ground-blocking effects. These results are supplemented by a discussion of stability trends noted during testing and possible implications when considering multi-row array interactions.

14 SOLAR ENERGY↗
DOE OSTI2024

Vortex splitting in two-dimensional fluids and non-neutral electron plasmas with smooth vorticity profiles

Initially, elliptical, quasi-two-dimensional (2D) fluid vortices can split into multiple pieces if the aspect ratio is sufficiently large due to the growth and saturation of perturbations known as Love modes on the vortex edge. Presented here are experiments and numerical simulations, showing that the aspect ratio threshold for vortex splitting is significantly higher for vortices with realistic, smooth edges than that predicted by a simple “vortex patch” model, where the vorticity is treated as piecewise constant inside a deformable boundary. The experiments are conducted by exploiting the E × B drift dynamics of collisionless, pure electron plasmas in a Penning–Malmberg trap, which closely model 2D vortex dynamics due to an isomorphism between the Drift–Poisson equations describing the plasmas and the Euler equations describing ideal fluids. The simulations use a particle-in-cell method to model the evolution of a set of point vortices. The aspect ratio splitting threshold ranges up to about twice as large as the vortex patch prediction and depends on the edge vorticity gradient. This is thought to be due to spatial Landau damping, which decreases the vortex aspect ratio over time and, thus, stabilizes the Love modes. Near the threshold, asymmetric splitting events are observed in which one of the split products contains much less circulation than the other. These results are relevant to a wide range of quasi-2D fluid systems, including geophysical fluids, astrophysical disks, and drift-wave eddies in tokamak plasmas.

Physics↗
DOE OSTI2020

Special issue on the 24th workshop on MHD stability control

We report the 24th workshop on magnetohydrodynamic (MHD) stability control was held on the Columbia University campus 28–30th October, 2019. The purpose of this annual workshop is to discuss cutting edge results and form future plans for active control of MHD instabilities in magnetic confinement fusion reactor concepts. The program was organized by an international committee of representatives from Auburn University (USA), Columbia University (USA), Massachusetts Institute of Technology (USA), Princeton Plasma Physics Laboratory (USA), Princeton University (USA), Tottori University (Japan), Kyoto Institute of Technology (Japan), National Institute of Radiological Sciences (Japan), National Institute for Fusion Science (Japan), Institutes of Physical Science—Chinese Academy of Sciences (People's Republic of China), and Consiglio Nazionale delle Ricerche (Italian Republic). Dr Gerald Navratil and Columbia University, in particular, were responsible for organizing and hosting the meeting on their beautiful Morningside Heights campus.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Elevating the Practical Application of Sodium-Ion Batteries through Advanced Characterization Studies on Cathodes

Sodium-ion batteries (SIBs) have emerged as promising alternatives to their lithium-ion counterparts due to the abundance of sodium resources and their potential for cost-effective energy storage solutions. The chemistry for SIBs has been investigated since the 1980s, but it went through a slow research and development process. Recently, there has been an acceleration in technology maturation due to a supply chain crisis originating from unequal resource distribution and sustainability and safety concerns regarding lithium-ion batteries. However, the practical application of SIBs has been hindered primarily by challenges related to cathode materials, specifically, surface and structural stabilities in different conditions. Through the integration of advanced techniques such as in situ spectroscopy, operando diffraction, and high-resolution microscopy, a comprehensive understanding of the cathode’s dynamic behavior and degradation mechanisms can be achieved. The identified structural modifications, phase transitions, and degradation pathways offer critical insights into the design of robust cathode materials with prolonged cycling stability, fast charging capability, high energy density, great low-temperature performance, and safety. This review underscores the pivotal role of cutting-edge characterization techniques in guiding the development of high-performance sodium-ion batteries, thereby fostering the realization of sustainable and efficient energy storage solutions for diverse technological applications.

25 ENERGY STORAGE↗
DOE OSTI2023

The onset distribution of rotating m , n = 2 , 1 tearing modes and its consequences on the stability of high-confinement-mode plasmas in DIII-D

Abstract Analysis of a multi-scenario database of over 13 000 DIII-D H-mode discharges shows that the m , n = 2 , 1 magnetic islands are dominantly pressure gradient driven, stochastically triggered non-linear instabilities at all edge safety factor ( q 95 ) values. The instability onset time closely follows the exponential distribution in intermediate and high q 95 scenarios and is characterized by near constant onset rate ( λ ), in accordance with Poisson-point processes. This implies that the plasmas are operated in marginally stable conditions, characterized by a small threshold for instability growth and variations in the trigger amplitude and/or the stabilizing mechanisms with temporally uniform random distribution in this database. While the majority of the tearing modes occur in the first current-profile relaxation time of the β N flattop, constant λ throughout the β N flattop shows that the tearing onset is insensitive to the evolution of the equilibrium current profile. In low q 95 scenarios, where a large fraction of the plasmas are operated at low torque, λ increases over the course of the β N flattop, showing that these plasmas evolve toward more unstable conditions. The onset rate rapidly increases with β N , while it does not show a clear dependence on the current gradient at the mode rational surface. Overall, these observations support that the majority of the analyzed 2,1 tearing modes are non-linear, neoclassically driven instabilities and classical stability does not play a dominant role in their onset.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

On FIRE mode in KSTAR

We report on the status of Fast Ion Regulated Enhancement (FIRE) mode experiments in the Korea Superconducting Tokamak Advanced Research. This regime is being developed for high-performance, steady-state operation which features a stationary ion internal transport barrier, enabling a central ion temperature approaching 10 keV to be sustained for up to 50 s, without the need for delicate profile control and with no significant impurity accumulation. As its key novelty lies in the significant contribution of fast ions that stabilize core turbulence, the regime has been named FIRE mode. To achieve this regime, neutral beam injection is applied at moderate power levels near the L–H power threshold, while maintaining low plasma density to avoid the L–H transition. The scenario is typically established in diverted magnetic configurations. The core features of FIRE mode were investigated through power balance analysis and fluctuation measurements, revealing a clear transport bifurcation in the ion channel. At the plasma edge, FIRE mode occasionally exhibits I-mode characteristics, particularly in unfavorable magnetic null configurations with q 95 ∼ 4, including the presence of weakly coherent modes. In terms of MHD activity, sawtooth oscillations are observed but appear to be stabilized during the high-performance phase. Fast ion-driven Alfvénic eigenmodes (AEs), indicated by strong frequency chirping near 200 kHz, are also observed. Additionally, lower-frequency MHD activities, distinct from the fast ion-driven AEs, are present and have some influence on plasma performance. The enhancement of core confinement is primarily attributed to fast ion effects, which were evaluated with respect to dilution, alpha stabilization, and resonant interactions with turbulence using gyrokinetic analyses. Among these, the dilution effect was found to be the most dominant. The characteristics of FIRE mode were compared with those of other hot ion plasma scenarios, such as supershot and hot ion mode. While they share many similarities, FIRE mode is distinguished by the accessibility to conditions with T i ≈ T e , presence of I-mode edge features, and its long-duration sustainment. Predictive simulations of FIRE mode were performed using integrated transport modeling with TRIASSIC, employing the TGLF anomalous transport model. These simulations confirmed the critical role of fast ions in achieving this regime. The future prospect of FIRE mode for application in fusion reactors is discussed, with an emphasis on possibly extending the regime to higher density operation.

FIRE mode↗
DOE OSTI2023

Phase stability and coercivity in La 2 Fe 14 B magnet

Critical rare-earth free La 2 Fe 14 B (2:14:1) has the potential to be a gap permanent magnet. However, La 2 Fe 14 B decomposes into La, α-Fe, and La 4 Fe 4 phases below 1067 K. The phase stability and coercivity have been studied in La 2 Fe 14 B magnet using first principles DFT (density functional theory) calculation and micromagnetic simulation. For a perfect La 2 Fe 14 B cube (edge length of 256 nm) without any structural defects and soft magnetic secondary phases, the coercivity (8.5 kOe) is reduced to ~40% of its magnetocrystalline anisotropy field ( H A = 20 kOe). Further, the coercivity sharply reduces to 3.2 kOe upon forming a thin layer (2 nm) of α-Fe on the surface of the La 2 Fe 14 B cube particle. The DFT calculations indicate that a partial replacement of La by other rare-earth (RE) elements can enhance the structural stability of 2:14:1. The gains in cohesive energy are 0.75, 0.10, and 0.33 eV per formula unit in (La 0.5 RE 0.5 ) 2 Fe 14 B with RE = Ce, Pr, and Nd, respectively. Stabilizing the 2:14:1 structure and mitigating the formation of soft magnetic structural defects or impurity phases such as α-Fe is necessary to develop La 2 Fe 14 B based magnet, which can be moderately achieved via partial substitution of La by other rare earth elements such as Ce, Pr, and Nd.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Revealing Reaction Pathways of Collective Substituted Iron Fluoride Electrode for Lithium Ion Batteries

Metal fluorides present a high redox potential among the conversion-type compounds, which make them specially work as cathode materials of lithium ion batteries. To mitigate the notorious cycling instability of conversion-type materials, substitutions of anion and cation have been proposed but the role of foreign elements in reaction pathway is not fully evaluated. In this work, we explored the lithiation pathway of a rutile-Fe 0.9 Co 0.1 OF cathode with multimodal analysis, including ex situ and in situ transmission electron microscopy and synchrotron X-ray techniques. Our work revealed a prolonged intercalation–extrusion–cation disordering process during phase transformations from the rutile phase to rocksalt phase, which microscopically corresponds to topotactic rearrangement of Fe/Co–O/F octahedra. During this process, the diffusion channels of lithium transformed from 3D to 2D while the corner-sharing octahedron changed to edge-sharing octahedron. DFT calculations indicate that the Co and O cosubstitution of the Fe 0.9 Co 0.1 OF cathode can improve its structural stability by stabilizing the thermodynamic semistable phases and reducing the thermodynamic potentials. We anticipate that our study will inspire further explorations on untraditional intercalation systems for secondary battery applications.

25 ENERGY STORAGE↗
DOE OSTI2026

Low resistance p-type contacts to monolayer WSe2 through chlorinated solvent doping

Tungsten diselenide (WSe 2 ) is a promising p-type semiconductor limited by high contact resistance (R C ) and the lack of a reliable doping strategy. Here, we demonstrate that exposing WSe 2 to chloroform provides simple and stable p-type doping. In monolayer WSe 2 transistors with Pd contacts, chloroform increases the maximum hole current by over 100× (>200 µA/µm), reduces R C to ~ 2.5 kΩ·μm, and retains an on/off ratio of 10 10 at room temperature. These improvements persist for over 8 months, survive a 150 °C thermal anneal, and remain effective down to 10 K, enabling a cryogenic R C of ~ 1 kΩ·μm. Density functional theory indicates that chloroform strongly physisorbs to WSe 2 , inducing hole doping with minimal impact on the electronic states between the valence band and conduction band edges. Auger electron spectroscopy and atomic force microscopy suggest that chloroform intercalates at the WSe 2 interface with the gate oxide, contributing to doping stability and mitigating interfacial dielectric disorder, though further studies are needed to conclusively confirm this mechanism. This robust, scalable approach enables high-yield WSe 2 transistors with good p-type performance.

42 ENGINEERING↗
DOE OSTI2025

Impurity radiation seeding of neoclassical tearing mode growth

Abstract The physics of neoclassical tearing modes (NTMs) is of great concern to tokamak plasma stability and performance, especially in the burning plasma regime. Whereas in many situations the seed events can be clearly identified, such as sawteeth and edge localized modes, the potential seeding mechanism of NTMs due to the resistive tearing instability driven by the impurity radiation cooling still needs more study. Recent NIMROD simulations have demonstrated that local impurity radiation cooling can drive the seed island growth and trigger the subsequent onset of NTM instability. The seed island is mainly driven by the local helical perturbation of the diamagnetic current induced by the perturbed pressure gradient as a result of the impurity radiative cooling on the rational surface. A heuristic closure for the neoclassical viscosity is adopted, and the seed island is further driven by the perturbed bootstrap current induced from the neoclassical electron viscous stress in the extended Ohm’s law. The growth rate of the NTM in simulations is found proportional to the electron neoclassical viscosity, and a theoretical neoclassical driving term is adopted to account for the nonlinear neoclassical island growth in the simulations.

Zeng, Shiyong (ORCID:000000017098818X)↗
DOE OSTI2023

Experimental and Theoretical Studies of the Surface Oxidation Process of Rare–Earth Tritellurides

Recent studies have established Van der Waals (vdW) layered and 2D rare-earth tritellurides (RTe 3 ) as superconductors and near room-temperature charge density wave (CDW) materials. Their environmental stability raises natural concern owing to aging/stability effects observed in other tellurium-based layered crystals. Here, the results establish the stability and environmental aging characteristics of these RTe 3 systems involving a variety of metals such as La, Nd, Sm, Gd, Dy, and Ho. The atomic force microscopy (AFM) and scanning electron microscopy (SEM) results show that all the RTe 3 sheets oxidize to form thin TeO x layers that are primarily confined to the surface, edges, and grain boundaries. Time-resolved in situ Raman spectroscopy measurements are used to understand the kinetics of the oxidization process for different lanthanide metal cations and establish their relative stability/resilience to oxidization. Overall results indicate that the vdW layers show higher air stability as the 4f electron number decreases going from Ho to La, resulting in the most stable LaTe 3 compared to the least stable HoTe 3 . Comprehensive quantum mechanical simulations reveal that environmental degradation originates from a strong oxidizing reaction with O 2 molecules, while humidity (H 2 O) plays a negligible role unless Te vacancies are present. Moreover, the simulations explain the effects of 4f electrons on the work function and Te vacancies formation, which directly impact the aging characteristics of RTe 3 layers. Interestingly, optical and electrical measurements show that the CDW response is still observed in aged RTe 3 layers owing to the presence of underlying pristine/nonoxidized RTe 3 layers, except CDW transition temperatures increase due to the thickness effect. Overall results offer the first in-depth environmental aging studies on these materials, which can be applied to engineer and design their chemical stability, surface properties, and overall CDW characteristics.

36 MATERIALS SCIENCE↗