Search NASA⌕ Search

SEARCH · Search NASA

Results for “electronic hybridization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Ubiquity of amplitude-modulated magnetic ordering in the H - T phase diagram of the frustrated non-Fermi-liquid YbAgGe

YbAgGe contains a magnetic geometrically frustrated kagome-like lattice that also features significant local single-ion anisotropy. The electronic state is established by hybridization of 4f and conduction electrons leading to heavy electronic masses. The competition between these various interactions leads to nontrivial behavior under external magnetic field, including a sequence of magnetic phase transitions, non-Fermi-liquid states, and possibly a quantum critical point. We present a series of neutron diffraction experiments performed in the mK temperature range and under magnetic fields up to 8 T in the hexagonal plane, revealing the microscopic nature of the first four subsequent magnetic states of this phase diagram. The magnetic phases are associated with the propagation vectors K 1 =($\frac{1}{3}$ 0 $\frac{1}{3}$) for H < 2 T, K 2 = (0 0 0.32) for 2 T < H < 3 T, K 1 = ($\frac{1}{3}$ 0 $\frac{1}{3}$) for 3 T < H < 4.5 T and k 3 = (0.195 0.195 0.38) for 4.5 T < H < 7 T. Our structural refinements reveal a strong modulation of the magnetic moment amplitude in all phases. We observe that the ordered moments of the three magnetically different Yb sites become increasingly different in field, which complies with the principle local anisotropy directions relative to the field direction. While the ordered moments are aligned predominantly in the hexagonal plane, we also find a significant out-of-plane component and a ferromagnetic contribution above 2 T. Here we discuss possible scenarios that may evolve around the phase boundary at 4.5 T, which is associated with putative quantum criticality as identified by various bulk probes. We propose further steps that are required to better understand the microscopic interactions in this material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Plasma waves near Saturn - Initial results from Voyager 1

The Voyager 1 plasma wave instrument detected many familiar types of plasma waves during the encounter with Saturn, including ion-acoustic waves and electron plasma oscillations upstream of the bow shock, an intense burst of electrostatic noise at the shock, and chorus, hiss, electrostatic electron cyclotron waves, and upper hybrid resonance emissions in the inner magnetosphere. A clocklike Saturn rotational control of low-frequency radio emissions was observed, and evidence was obtained of possible control by the moon Dione. Strong plasma wave emissions were detected at the Titan encounter indicating the presence of a turbulent sheath extending around Titan, and upper hybrid resonance measurements of the electron density show the existence of a dense plume of plasma being carried downstream of Titan by the interaction with the rapidly rotating magnetosphere of Saturn.

Gurnett, D. A.↗

Properties of Lower Hybrid Drift Waves and Energy Transfer Near and Inside the Magnetic Reconnection Electron Diffusion Regions

Here, we investigate properties of lower hybrid drift waves (LHDWs) near and inside the electron diffusion regions in 17 magnetopause and 9 magnetotail reconnection events using Magnetospheric MultiScale (MMS) mission observations. Our analysis show that LHDW type depend on the electron beta, as electron beta increases LHDWs become more electromagnetic in nature. The energy transfer from electromagnetic fields to particles is higher in electrostatic LHDWs and it is largely in parallel direction with respect to the local magnetic field. Linear dispersion analysis shows that electrostatic LHDWs are perpendicular propagating while electromagnetic waves propagate in oblique directions and the normalized wavenumber of all LHDW types falls within 0.5–0.8 range. A simple estimate on the LHDW nonlinear saturation suggests a possibly important roles played by these waves in supporting the reconnection electric field.

79 ASTRONOMY AND ASTROPHYSICS↗

Nonlocal analysis of finite-beam-driven instabilities

The fully kinetic integral eigenmode equation in wave-number space is used to describe the nonlocal behavior of electrostatic waves in an electron-beam plasma, which are studied in the low-temperature-beam regime and the warm-beam regime. The case of strongly magnetized electrons and unmagnetized ions, which corresponds to the waves in a frequency range from the lower-hybrid to the electron plasma frequency, is examined. Three wave modes are found. The first group consists of modes that have dispersive properties similar to the uniform, infinite beam-plasma system. Depending on the beam width, the growth rates are strongly reduced. The second group, surface modes, are localized at the periphery of the beam region and are less unstable than the unstable modes of the first group. The third group represents natural oscillations of the background plasma. These modes are virtually unaffected by the beam.

Serizawa, Y.↗

Hybrid-VPIC: An open-source kinetic/fluid hybrid particle-in-cell code

Hybrid-VPIC is an extension of the open-source high-performance particle-in-cell (PIC) code VPIC incorporating hybrid kinetic ion/fluid electron solvers. This paper describes the models that are available in the code and gives an overview of applications of the code to space and laboratory plasma physics problems. Particular choices in how the hybrid solvers were implemented are documented for reference by users. A few solutions for handling numerical complications particular to hybrid codes are also described. Finally, special emphasis is given to the computationally taxing problem of modeling mix in collisional high-energy-density regimes, for which more accurate electron fluid transport coefficients have been implemented for the first time in a hybrid PIC code.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Progress of analog-hybrid computation

Review of fast analog/hybrid computer systems, integrated operational amplifiers, electronic mode-control switches, digital attenuators, and packaging techniques

ELECTRONIC SWITCH↗

Hybrid Theory of P-Wave Electron-Hydrogen Elastic Scattering

We report on a study of electron-hydrogen scattering, using a combination of a modified method of polarized orbitals and the optical potential formalism. The calculation is restricted to P waves in the elastic region, where the correlation functions are of Hylleraas type. It is found that the phase shifts are not significantly affected by the modification of the target function by a method similar to the method of polarized orbitals and they are close to the phase shifts calculated earlier by Bhatia. This indicates that the correlation function is general enough to include the target distortion (polarization) in the presence of the incident electron. The important fact is that in the present calculation, to obtain similar results only 35-term correlation function is needed in the wave function compared to the 220-term wave function required in the above-mentioned previous calculation. Results for the phase shifts, obtained in the present hybrid formalism, are rigorous lower bounds to the exact phase shifts.

Bhatia, Anand↗

Simulations of active ion injection experiments on ARCS 3

The ARCS 3 sounding rocket experiment used two argon guns oriented parallel and perpendicular to the geomagnetic field. The parameters of this experiment have been used in a series of particle simulations in order to interpret ion beam interaction with the multispecies ionospheric plasma. Along with the lower hybrid mode between the electron and the hydrogen gyrofrequencies, ion-ion hybrid modes between the hydrogen and helium gyrofrequencies and between the helium and oxygen gyrofrequencies are identified in the simulations. Besides these cold plasma modes, warm Bernstein modes of the respective ion species are identified. The parallel argon beam injections excite lower hybrid waves perpendicular to the magnetic field because of the finite thermal spread of the parallel beam. Perpendicular ion heating of background hydrogen, helium, and oxygen is comparable in the simulations. Comparisons are made with the wave and particle data from the ARCS 3 rocket experiment.

Hudson, M. K.↗

Particle Access and Charging Environments in the Lunar Wake

A plasma wake a region of low density, high temperature plasma forms on the far side of the Moon when solar wind, magnetosheath, and magnetotail plasma flows past the Moon [Manka, 1973; Ogilvie et al., 1996; Farrell et al., 1998; Halekas et al., 2005]. Ion populations in these flows typically have much smaller thermal velocity than bulk speed and are therefore excluded from the plasma wake while the large thermal electron velocity allows the lighter negatively charged particles to stream ahead of the ions into the wake. Charge separation due to electrons streaming ahead of the ions into the wake from the wake boundary establishes an ambipolar electric field which impedes the motion of electron flow and accelerates ions into the wake [Ogilvie et al., 1996; Farrell et al., 1997]. We have conducted a theoretical study of acceleration (and deceleration) of charged particles in lunar plasma environments, which investigated the mechanisms responsible for allowing solar wind entry into the lunar wake, and for producing energetic particle distributions observed within the lunar wake. To this end, the investigation utilized a macroscale 3D hybrid particle-in-cell numerical model of the interaction of the Moon with external plasma environments to compute electric fields in the lunar environment for a variety of external plasma conditions and interplanetary magnetic field orientations. Ion dynamics were attained from the hybrid code while electron dynamics were determined by considering electron test particle trajectories through the fields established in the hybrid code. Results from the code will be presented to evaluate charging environments within the lunar wake.

Parker, Linda↗

The Timepix4 analog front-end design: Lessons learnt on fundamental limits to noise and time resolution in highly segmented hybrid pixel detectors

This manuscript describes the optimization of the front-end readout electronics for high granularity hybrid pixel detectors. The theoretical study aims at minimizing the noise and jitter. The model presented here is validated with both circuit post layout simulations and measurements on the Timepix4 Application Specific Integrated Circuit (ASIC). The analog front-end circuit and the procedure to optimize the dimensions of the main transistors are described with detail. The Timepix4 is the most recent ASIC designed in the framework of the Medipix4 Collaboration. It was manufactured in 65nm CMOS process, and consists of a four side buttable matrix of 448 × 512 pixels with 55µm pitch. The analog front-end has a gain of ~36mV/ke - when configured in High Gain Mode, and ~20mV/ke - when configured in Low Gain Mode. The Equivalent Noise Charge (ENC) is ~68e - rms and ~80e - rms in High Gain Mode and in Low Gain Mode respectively. In event driven mode the incoming hits can be time stamped within a ~ 200ps time bin and the chip can deal with a maximum flux of ~ 3.6MHzmm –2 s –1 . In photon counting mode, the chip can deal with up to ~ 5GHzmm –2 s –1 . The routine designed to optimize the Timepix4 front-end is then used to analyze the performance limits in terms of jitter and noise for Charge Sensitive Amplifiers in pixel detectors.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Multiband superconductivity in strongly hybridized 1 T ' - WTe 2 / NbSe 2 heterostructures

The interplay of topology and superconductivity has become a subject of intense research in condensed-matter physics for the pursuit of topologically nontrivial forms of superconducting pairing. An intrinsically normal-conducting material can inherit superconductivity via electrical contact to a parent superconductor via the proximity effect, usually understood as Andreev reflection at the interface between the distinct electronic structures of two separate conductors. However, at high interface transparency, strong coupling inevitably leads to changes in the band structure, locally, owing to hybridization of electronic states. Here, we investigate such strongly proximity-coupled heterostructures of monolayer $1T$' - $\mathrm{WTe_2}$ grown on NbSe 2 by van der Waals epitaxy. The superconducting local density of states, resolved in scanning tunneling spectroscopy down to 500 mK, reflects a hybrid electronic structure well described by a multiband framework based on the McMillan equations which captures the multiband superconductivity inherent to the NbSe 2 substrate and that is induced by proximity to $\mathrm{WTe_2}$ self-consistently. Our material-specific tight-binding model captures the hybridized heterostructure quantitatively and confirms that strong interlayer hopping gives rise to a semimetallic density of states in the two-dimensional $\mathrm{WTe_2}$ bulk, even for nominally band-insulating crystals. The model further accurately predicts the measured order parameter Δ ≅ 0.6 meV induced in the $\mathrm{WTe_2}$ monolayer bulk, stable beyond a 2 T magnetic field. So we believe that our detailed multiband analysis of the hybrid electronic structure provides a useful tool for sensitive spatial mapping of induced order parameters in proximitized atomically thin topological materials.

36 MATERIALS SCIENCE↗

How the choice of exchange–correlation functional affects DFT-based simulations of the hydrated electron

Hydrated electrons are anionic species that are formed when an excess electron is introduced into liquid water. Building an understanding of how hydrated electrons behave in solution has been a long-standing effort of simulation methods, of which density functional theory (DFT) has come to the fore in recent years. The ability of DFT to model the reactive chemistry of hydrated electrons is an attractive advantage over semi-classical methodologies; however, relatively few density functional approximations (DFAs) have been used for the hydrated electron simulations presented in the literature. Here, we simulate hydrated electron systems using a series of exchange–correlation (XC) functionals spanning Jacob’s ladder. We calculate a variety of experimental and other observables of the hydrated electron and compare the XC functional dependence for each quantity. We find that the formation of a stable localized hydrated electron is not necessarily limited to hybrid XC functionals and that some hybrid functionals produce delocalized hydrated electrons or electrons that react with the surrounding water at an unphysically fast rate. Here, we further characterize how different DFAs impact the solvent structure and predicted spectroscopy of the hydrated electron, considering several methods for calculating the hydrated electron’s absorption spectrum for the best comparison between structures generated using different density functionals. None of the dozen or so DFAs that we investigated are able to correctly predict the hydrated electron’s spectroscopy, vertical detachment energy, or molar solvation volume.

Ab-initio molecular dynamics↗

Medium-energy electrons and heavy ions in Jupiter's magnetosphere - Effects of lower hybrid wave-particle interactions

A theory of medium-energy (about keV) electrons and heavy ions in Jupiter's magnetosphere is presented. Lower hybrid waves are generated by the combined effects of a ring instability of neutral wind pickup ions and the modified two-stream instability associated with transport of cool Iogenic plasma. The quasi-linear energy diffusion coefficient for lower hybrid wave-particle interactions is evaluated, and several solutions to the diffusion equation are given. Calculations based on measured wave properties show that the noise substantially modifies the particle distribution functions. The effects are to accelerate superthermal ions and electrons to keV energies and to thermalize the pickup ions on time scales comparable to the particle residence time. The S(2+)/S(+) ratio at medium energies is a measure of the relative contribution from Iogenic thermal plasma and neutral wind ions, and this important quantity should be determined from future measurements. The theory also predicts a preferential acceleration of heavy ions with an accleration time that scales inversely with the root of the ion mass. Electrons accelerated by the process contribute to further reionization of the neutral wind by electron impact, thus providing a possible confirmation of Alfven's critical velocity effect in the Jovian magnetosphere.

Barbosa, D. D.↗

Hybrid Metal Halides: Advancing Optoelectronic Materials (Final Technical Report)

Hybrid metal halides, particularly main group halide perovskites, are a unique class of materials that offer exceptional optoelectronic properties along with a remarkable materials design space. Initial research on this class of materials was driven by the ability of the prototype hybrid 3D perovskite-structured compound methylammonium lead iodide to function as the active layer in thin film solar cells. It is now known that this class of materials comprise a large family with tunable band gaps, relatively high charge carrier mobilities in both single crystal and polycrystalline forms, and relatively low concentrations of (deleterious) electrically active states within the band gap. Beyond applications in solar cells, the potential of these materials has been extended to emitters in light emitting diodes, and active components of radiation detectors. Complementing new functionality, the design space for hybrid metal halides continues to increase with discovery of new structural motifs. In this project, the combination of organic and inorganic functionalities has been employed to open pathways to the design and synthesis new, functional hybrid metal halides. Beyond the simple perovskites, Ruddlesden-Popper and Dion-Jacobsen compounds, and other variants, such as the newly advanced “hollow” perovskites have been studied. The materials have provided routes to understanding the unique electronic properties of hybrid metal halides because of their natural quantum well structures as well as other means of controlling band gaps and band dispersions. Understanding these materials, including the design rules for their formation, their structures and compositions in bulk and in thin films form, and the role of local (non-crystallographic) structure has an important aspect of this endeavor. The goal of advancing new materials and new fundamental understanding within this deceptively simple, yet fascinating class of compounds, so richly endowed with interesting and useful functionality, has been fulfilled.

36 MATERIALS SCIENCE↗

Hybrid Simulations of FRC Merging and Compression

An improved understanding of field-reversed configuration (FRC) merging and stability in high acceleration and compression magnetic fields is needed to speed up the development of the pulsed fusion concept developed at Helion Energy. All previous theoretical and simulation work on FRC merging and compression was performed using two-dimensional (2D) magnetohydrodynamic (MHD) models. The results of novel 2D hybrid simulations (fluid electrons and full-orbit kinetic ions) of FRC merging and compression are presented. Results of kinetic and MHD simulations, computed using the HYM code, are compared and analyzed. In cases without axial magnetic compression, both the MHD and hybrid simulations show a high sensitivity to the initial parameters (i.e. FRC separation, velocity, normalized separatrix radius, and plasma viscosity), showing that FRCs with large elongation and separatrix radius either do not merge or merge partially, forming a doublet FRC. In conclusion, application of a mirror coil field at the FRC ends with increasing strength is shown to lead to fast and complete merging of the FRCs in MHD and kinetic simulations.

FRC↗

Structure and electronic tunability of acene alkylamine based layered hybrid organic-inorganic perovskites from first principles

Twelve layered hybrid organic-inorganic perovskites combining oligoacene derivatives [phenylmethylammonium (PMA), naphthylmethylammonium (NMA), anthrylmethylammonium (AMA), and tetrylmethylammonium (TMA)] and lead halides (Cl - , Br - , and I - anions) are investigated by first-principles density functional theory (DFT), showing broad, rational tunability of band gap, quantum well type, and spin-dependent energy band properties. Six compounds are known from previous syntheses and are used to devise a computational search space for likely low-energy structures. Among the six known compounds, a refined structure is identified for (NMA) 2 ⁢ PbCl 4 and a new, lower-energy structure is suggested for (AMA) 2 ⁢PbCl 4 . The DFT based search methodology is next applied to predict the likely structures for the six unknown compounds. Computationally predicted energy levels for all 12 compounds from spin-orbit coupled hybrid DFT reveal tunable type I quantum well alignments, with frontier orbitals located on the inorganic component, on the organic component, or on both, as controlled by cation and anion selection. In conclusion, several structures spontaneously break local and global inversion symmetry, causing strong spin splitting of the conduction bands [up to 0.12 eV for (PMA) 2 ⁢PbCl 4 ] and showing potential for spin-dependent transport properties and future spintronic and tunable chiroptical applications.

36 MATERIALS SCIENCE↗