Search NASA⌕ Search

SEARCH · Search NASA

Results for “electrons in graphene”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Deterministic fabrication of graphene hexagonal boron nitride moiré superlattices

The electronic properties of moiré heterostructures depend sensitively on the relative orientation between layers of the stack. For example, near-magic-angle twisted bilayer graphene (TBG) commonly shows superconductivity, yet a TBG sample with one of the graphene layers rotationally aligned to a hexagonal Boron Nitride (hBN) cladding layer provided experimental observation of orbital ferromagnetism. To create samples with aligned graphene/hBN, researchers often align edges of exfoliated flakes that appear straight in optical micrographs. However, graphene or hBN can cleave along either zig-zag or armchair lattice directions, introducing a 30° ambiguity in the relative orientation of two flakes. By characterizing the crystal lattice orientation of exfoliated flakes prior to stacking using Raman and second-harmonic generation for graphene and hBN, respectively, we unambiguously align monolayer graphene to hBN at a near-0°, not 30°, relative twist angle. We confirm this alignment by torsional force microscopy of the graphene/hBN moiré on an open-face stack, and then by cryogenic transport measurements, after full encapsulation with a second, nonaligned hBN layer. This work demonstrates a key step toward systematically exploring the effects of the relative twist angle between dissimilar materials within moiré heterostructures.

boron nitride↗
DOE OSTI2021

Imaging Secondary Electron Emission from a Single Atomic Layer

Graphene-based devices hold promise for a wide range of technological applications. Yet characterizing the structure and the electrical properties of a material that is only one atomic layer thick still poses technical challenges. Recent investigations indicate that secondary-electron electron-beam-induced current (SE-EBIC) imaging can reveal subtle details regarding electrical conductivity and electron transport with high spatial resolution. Here, it is shown that the SEEBIC imaging mode can be used to detect suspended single layers of graphene and distinguish between different numbers of layers. Pristine and contaminated areas of graphene are also compared to show that pristine graphene exhibits a substantially lower SE yield than contaminated regions. In conclusion, this SEEBIC imaging mode may provide valuable information for the engineering of surface coatings where SE yield is a priority.

36 MATERIALS SCIENCE↗
DOE OSTI2019

High performance graphene-like thinly layered graphite based visible light photodetector

In this work, the drop casting method is utilized to obtain a thin graphene-like graphite layer as a photodetection layer on a SiO{sub 2}/Si substrate, and its performance is characterized to determine its potential use in commercial applications. The thin layer is formed by first synthesizing graphite soot from a butane flame before being turned into a liquid solution and drop-casted onto the substrate to form a thin graphene-like graphite film. Field emission scanning electron microscope and Raman vibrational mode analyses indicate that the fabricated graphene-like graphite layer has characteristics similar to the graphene. The graphene-like graphite photodetector demonstrates a narrow photoresponse from 530 to 680 nm, covering visible sources from green to red. The responsivity and external quantum efficiency of the device under the illumination of red laser 660 nm is found to be around 148 mA W{sup −1} and 27.8% respectively and is faster than that reported for similar systems using graphene and reduced graphene oxide previously. A fast response time of 83.7 and 28 µs at a modulation frequency of 1.0 and 10000 Hz respectively from the graphene-like thinly layered graphite photodetector shows potential application for the development of low-cost carbon-based photodetectors in near future.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2024

Direct observation of a magnetic-field-induced Wigner crystal

Wigner predicted that when the Coulomb interactions between electrons become much stronger than their kinetic energy, electrons crystallize into a closely packed lattice. A variety of two-dimensional systems have shown evidence for Wigner crystals (WCs). However, a spontaneously formed classical or quantum WC has never been directly visualized. Neither the identification of the WC symmetry nor direct investigation of its melting has been accomplished. Here we use high-resolution scanning tunnelling microscopy measurements to directly image a magnetic-field-induced electron WC in Bernal-stacked bilayer graphene and examine its structural properties as a function of electron density, magnetic field and temperature. At high fields and the lowest temperature, we observe a triangular lattice electron WC in the lowest Landau level. The WC possesses the expected lattice constant and is robust between filling factor ν ≈ 0.13 and ν ≈ 0.38 except near fillings where it competes with fractional quantum Hall states. Increasing the density or temperature results in the melting of the WC into a liquid phase that is isotropic but has a modulated structure characterized by the Bragg wavevector of the WC. At low magnetic fields, the WC unexpectedly transitions into an anisotropic stripe phase, which has been commonly anticipated to form in higher Landau levels. Furthermore, analysis of individual lattice sites shows signatures that may be related to the quantum zero-point motion of electrons in the WC lattice.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Simultaneously improved electrical and mechanical performance of hot-extruded bulk scale aluminum-graphene wires

Aluminum-based alloys are highly sought after as lightweight alternatives in electric grid applications. Improving the electrical conductivity of aluminum alloys has the potential to increase the energy efficiency of power transport. Here we used a hot extrusion process to synthesize AA1100 alloy with low-cost reduced graphene oxide nanoparticles to manufacture ultra-conductive aluminum composites in this study. The effects of graphene content on the electrical and mechanical performance of the composites were evaluated. The macroscale AA1100/graphene wires demonstrated a 2.1% enhancement in electrical conductivity at 20 °C, while the ultimate tensile strength increased by 6.1%. A Zener-Hollomon model was used to confirm the in-process exfoliation of the agglomerated graphene nanoparticle feedstock into high electrical conductivity graphene-like flakes during extrusion. They may have provided high-velocity carrier pathways leading to the enhanced electrical performance of the alloy. Transmission electron microscopy at aluminum-graphene interfaces ensures the preclusion of detrimental carbide formation during composite synthesis while confirming the structure graphene-like flakes. The in-process exfoliation provides an economically viable technique to produce bulk scale graphinated aluminum composites for advanced application and can be applied more generally to other alloy systems.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Recyclable Graphene Sheets as a Growth Template for Crystalline ZnO Nanowires

Recent advances in nanoscience have opened ways of recycling substrates for nanomaterial growth. Novel materials, such as atomically thin materials, are highly desirable for the recycling substrates. In this work, we report recycling of monolayer graphene as a growth template for synthesis of single crystalline ZnO nanowires. Selective nucleation of ZnO nanowires on graphene was elucidated by scanning electron microscopy and density functional theory calculation. Growth and subsequent separation of ZnO nanowires was repeated up to seven times on the same monolayer graphene film. Raman analyses were also performed to investigate the quality of graphene structure along the recycling processes. The chemical robustness of graphene enables the repetitive ZnO nanowire growth without noticeable degradation of the graphene quality. This work presents a route for graphene as a multifunctional growth template for diverse nanomaterials such as nanocrystals, aligned nanowires, other two-dimensional materials, and semiconductor thin films.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Cloning the Dirac cones of bilayer graphene to the zone center by selenium adsorption

Dirac cones can foster extraordinary electronic effects, as exemplified by the case of graphene layers. Angle-resolved photoemission reveals that adsorption of selenium (Se) vapor on bilayer graphene creates a symmetric hybrid clone of the Dirac cones at the zone center. A detailed analysis aided by first-principles calculations shows that the adsorbed layer consists of an ordered array of Se 8 molecules. The uncovered cloning mechanism illustrates a method to generate electronic features of scientific and technological interests by gentle surface modification via van der Waals adsorption.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Nitrogen-doped graphene nanomaterials for electrochemical catalysis/reactions: A review on chemical structures and stability

The electronic structure of the carbon-based nanomaterials can be modulated by doping heteroatoms into them. When nitrogen is doped into the graphene structure with different bonding configurations, it changes the material's electronic properties in a variety of ways. Because of the tuned electronic properties, nitrogen-doped graphene (N-G) is applicable in electrochemical systems as catalyst. Despite having tremendous prospects, a holistic view of the structural and functional properties of N-G is still unclear. Moreover, to our knowledge, significant findings on the properties of N-G are not well documented yet, which creates an obstacle to the further improvement of this nanomaterial. Keeping our focus on the catalytic activities, in this paper, we presented an in-detailed review of the overall chemical structure and functional properties of N-G nanomaterials. Starting from the structural properties of major precursor materials for N-G synthesis, we reviewed the physical features and its dependence on the synthesis parameters. Also, a detailed study has been conducted on the key nitrogen functional groups' structural properties, favorable formation environment, influence on the electronic structure of N-G, and role in the catalytic activity. Finally, current progress on the stability of N-G nanocatalysts is reported with an insight into the degradation mechanism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Near-Threshold Photoemission from Graphene-Coated Cu(110)

In this article, the brightness of electron beams emitted from photocathode sources plays a critical role in determining the performance of x-ray free-electron lasers and ultrafast electron-diffraction applications. In order to achieve the maximum brightness, the electrons need to be emitted from a photocathode with the lowest-possible mean transverse energy (MTE). Recent investigations have shown that capping a Cu(110) photocathode with a monolayer of graphene can protect the quantum efficiency (QE) from long-term exposure to varying vacuum conditions. However, there have been no studies that investigate the effects that a monolayer of graphene has on the MTE. Here, we report on measurements of a graphene-coated Cu(110) single crystal near the photoemission threshold for room and liquid-nitrogen temperatures. At room temperature, a minimum MTE of 25 meV is measured at 295 nm. At liquid-nitrogen temperatures, a minimum MTE of 9 meV is measured at the photoemission threshold of 290 nm.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Production of warm ions in electron beam generated E × B plasma

Several recent experiments have demonstrated low-damage processing of 2D materials, such as graphene and single crystal diamond, using electron beam (e-beam) generated plasmas with applied crossed electric and magnetic (E × B) fields. Here, the low damage of these sensitive materials is commonly attributed to the low energy of ions incident to the substrate surface and the ion confinement in E x B fields. In this work, measurements of atom and ion velocity distribution functions in an e-beam E × B plasma at sub-mTorr argon pressures using a laser-induced fluorescence diagnostic revealed the presence of a warm population of ions with temperatures of ~ 1 eV that are sufficient to destroy the ion confinement in E × B fields and drive the ion flux by cross field diffusion in the direction opposite to the applied electric field, toward the plasma-bounded walls or substrate. Thus, it is this nearly ambipolar diffusion process that is responsible for the flux of charged particles impinging on the wall/substrate surface.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2020

Observation of Electrically Tunable van Hove Singularities in Twisted Bilayer Graphene from NanoARPES

The possibility of triggering correlated phenomena by placing a singularity of the density of states near the Fermi energy remains an intriguing avenue toward engineering the properties of quantum materials. Twisted bilayer graphene is a key material in this regard because the superlattice produced by the rotated graphene layers introduces a van Hove singularity and flat bands near the Fermi energy that cause the emergence of numerous correlated phases, including superconductivity. Direct demonstration of electrostatic control of the superlattice bands over a wide energy range has, so far, been critically missing. This work examines the effect of electrical doping on the electronic band structure of twisted bilayer graphene using a back-gated device architecture for angle-resolved photoemission measurements with a nano-focused light spot. A twist angle of 12.2° is selected such that the superlattice Brillouin zone is sufficiently large to enable identification of van Hove singularities and flat band segments in momentum space. Finally, the doping dependence of these features is extracted over an energy range of 0.4 eV, expanding the combinations of twist angle and doping where they can be placed at the Fermi energy and thereby induce new correlated electronic phases in twisted bilayer graphene.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Enzymatic Laser-Induced Graphene Biosensor for Electrochemical Sensing of the Herbicide Glyphosate

Glyphosate is a globally applied herbicide yet it has been relatively undetectable in-field samples outside of gold-standard techniques. Its presumed nontoxicity toward humans has been contested by the International Agency for Research on Cancer, while it has been detected in farmers’ urine, surface waters and crop residues. Rapid, on-site detection of glyphosate is hindered by lack of field-deployable and easy-to-use sensors that circumvent sample transportation to limited laboratories that possess the equipment needed for detection. Herein, the flavoenzyme, glycine oxidase, immobilized on platinum-decorated laser-induced graphene (LIG) is used for selective detection of glyphosate as it is a substrate for GlyOx. The LIG platform provides a scaffold for enzyme attachment while maintaining the electronic and surface properties of graphene. The sensor exhibits a linear range of 10–260 µm, detection limit of 3.03 µm, and sensitivity of 0.991 nA µm -1 . The sensor shows minimal interference from the commonly used herbicides and insecticides: atrazine, 2,4-dichlorophenoxyacetic acid, dicamba, parathion-methyl, paraoxon-methyl, malathion, chlorpyrifos, thiamethoxam, clothianidin, and imidacloprid. Sensor function is further tested in complex river water and crop residue fluids, which validate this platform as a scalable, direct-write, and selective method of glyphosate detection for herbicide mapping and food analysis.

47 OTHER INSTRUMENTATION↗
NASA NTRS2018

Nanomanufacturing of Graphene Nanosheets Through Hole Engineering

Facile and scalable fabrication of highly dense and high quality graphene films and articles is extremely attractive for a range of electronic and mechanical applications. Pristine, high quality graphene with its inherent impermeability poses challenges in fabricating dense films and thick parts with high electrical conductivity due to the difficulty in removing trapped air and/or solvents used in various fabrication methods. To overcome this deficiency, nano-holes were intentionally created in pristine graphene (“holey graphene”) with an average diameter of approximately 15 nm. The holes serve as pathways for the rapid removal of gases or liquids and enable the fabrication of dense holey graphene nanostructures. Subsequently, a high temperature process is applied to effectively repair the nano-holes and recover the high quality graphene conjugated network. Through the creation and repair of the nano-holes, dense graphene articles were created that exhibited an ultrahigh conductivity of 2209 S/cm and a high carrier mobility of 673 cm2V-1s-1. This unique processing methodology enables the facile and scalable fabrication of high quality graphene constructs for a variety of applications.

Yanan Chen↗
DOE OSTI2023

Local spectroscopy of a gate-switchable moiré quantum anomalous Hall insulator

Abstract In recent years, correlated insulating states, unconventional superconductivity, and topologically non-trivial phases have all been observed in several moiré heterostructures. However, understanding of the physical mechanisms behind these phenomena is hampered by the lack of local electronic structure data. Here, we use scanning tunnelling microscopy and spectroscopy to demonstrate how the interplay between correlation, topology, and local atomic structure determines the behaviour of electron-doped twisted monolayer–bilayer graphene. Through gate- and magnetic field-dependent measurements, we observe local spectroscopic signatures indicating a quantum anomalous Hall insulating state with a total Chern number of ±2 at a doping level of three electrons per moiré unit cell. We show that the sign of the Chern number and associated magnetism can be electrostatically switched only over a limited range of twist angle and sample hetero-strain values. This results from a competition between the orbital magnetization of filled bulk bands and chiral edge states, which is sensitive to strain-induced distortions in the moiré superlattice.

36 MATERIALS SCIENCE↗
DOE OSTI2022

The role of temperature on defect diffusion and nanoscale patterning in graphene

Graphene is of great scientific interest due to a variety of unique properties such as ballistic transport, spin selectivity, the quantum hall effect, and other quantum properties. Nanopatterning and atomic scale modifications of graphene are expected to enable further control over its intrinsic properties, providing ways to tune the electronic properties through geometric and strain effects, introduce edge states and other local or extended topological defects, and sculpt circuit paths. The focused beam of a scanning transmission electron microscope (STEM) can be used to remove atoms, enabling milling, doping, and deposition. Utilization of a STEM as an atomic scale fabrication platform is increasing; however, a detailed understanding of beam-induced processes and the subsequent cascade of aftereffects is lacking. Here, we examine the electron beam effects on atomically clean graphene at a variety of temperatures ranging from 400 to 1000 °C. We find that temperature plays a significant role in the milling rate and moderates competing processes of carbon adatom coalescence, graphene healing, and the diffusion (and recombination) of defects. The results of this work can be applied to a wider range of 2D materials and introduce better understanding of defect evolution in graphite and other bulk layered materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

An epitaxial graphene platform for zero-energy edge state nanoelectronics

Graphene’s original promise to succeed silicon faltered due to pervasive edge disorder in lithographically patterned deposited graphene and the lack of a new electronics paradigm. Here we demonstrate that the annealed edges in conventionally patterned graphene epitaxially grown on a silicon carbide substrate (epigraphene) are stabilized by the substrate and support a protected edge state. The edge state has a mean free path that is greater than 50 microns, 5000 times greater than the bulk states and involves a theoretically unexpected Majorana-like zero-energy non-degenerate quasiparticle that does not produce a Hall voltage. In seamless integrated structures, the edge state forms a zero-energy one-dimensional ballistic network with essentially dissipationless nodes at ribbon–ribbon junctions. Seamless device structures offer a variety of switching possibilities including quantum coherent devices at low temperatures. This makes epigraphene a technologically viable graphene nanoelectronics platform that has the potential to succeed silicon nanoelectronics.

42 ENGINEERING↗
DOE OSTI2026

4-Electron Oxygen Reduction Reaction (ORR) with Iron Phthalocyanine (FePc) Functionalized Nanowire Templated-3D Fuzzy Graphene (NT-3DFG)

Iron phthalocyanine (FePc) is a promising alternative to platinum-based catalysts for sustainable energy devices; however, the plane-symmetry of Fe-N 4 sites, random aggregation, and poor conductivity of FePc present major barriers for their application as oxygen reduction reaction (ORR) electrocatalysts. Here, we report the synergistic effects of FePc electrocatalysts supported by a nanowire-templated three-dimensional fuzzy graphene (FePc@NT-3DFG) substrate. The in situ functionalized oxygen groups (iFOGs) at the edge of NT-3DFG localize Fe active sites in FePc under alkaline ORR conditions. With a uniform FePc distribution through many single layers of graphene, the NT-3DFG substrates improve O 2 adsorption and catalytic activity while stabilizing the electrochemical activity during reactions. The FePc@NT-3DFG catalyst exhibits fast ORR kinetics with an extremely low Tafel slope of 28.3 ± 2.7 mV dec −1 , a higher half-wave potential of 0.911 ± 0.004 V (vs RHE), and notable long-term stability at 0.5 V (vs RHE) of 96.0 ± 0.4% retention after 30 h. Surface chemistry spectra validate electronic configuration modification of Fe at the iFOGs. Density functional theory calculations indicate that the extra layers of graphene improve oxygen adsorption. Moreover, additional exploration of other transition metal phthalocyanines supports the effects of iFOGs through the transition toward 4e − ORR. This work offers an expanded strategy for active site modification through edge-based graphene substrates for 4e − ORR.

X-ray absorption spectroscopy↗