SEARCH · Search NASA

Results for “elevation models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

All sources NASA NTRS DOE OSTI

NASA NTRS1992

Topographic mapping from ERS-1 and SEASAT radar interferometry

A radar interferometric technique for topographic mapping of surfaces yields a high resolution, globally consistent approach to generation of digital elevation models. The technique is illustrated with maps generated from SEASAT and European Space Agency Remote Sensing Satellite (ERS-1) data. A SEASAT interferometric image of a forested area which includes some unvegetated lava flows is analyzed. An analysis of errors expected from application of the technique to maps generated from ERS-1 data is presented. An orbital scenario for a global mapping mission is outlined.

Zebker, Howard A.↗

NASA NTRS1993

Topographic slope from the SAR interferometric phase gradient

A new algorithm for the direct calculation of topographic slope maps from synthetic aperture radar (SAR) interferograms is presented. The algorithm derives slope maps without first requiring the creation of a digital elevational model (DEM) from the interferogram, thus obviating the need for high SNR in the interferogram and altitude calibration points for the scene. SAR data useful for interferometry has been collected by the Active Microwave Imager on board the ERS-1 satellite, when it was in a short period repeat orbit. Two passes of the radar sensor form a cross-track interferometric baseline. For a point target at some position (x,y,h), the interferometric phase difference phi is proportional to the difference in path lengths for the two sensor positions to the scatterer. Given the phase difference as measured in the complex interferogram and an accurate baseline geometry, the position of the scatterer, most significantly the height h, can be determined through triangulation. The interferometric phase measurement however is known only modulo 2-pi, and hence it is necessary to determine the correct multiple of 2-pi to add to the phase at each point to obtain an estimate of the actual phase with respect to an absolute datum. This phase unwrapping process is required for creating DEM's, and is difficult or impossible for regions of low SNR or SAR image layover. The new algorithm described here derives slope maps without requiring phase unwrapping.

Werner, Charles L.↗

NASA NTRS1993

Performance evaluation of the JPL TOPSAR system: An across-track interferometric SAR system for topographic mapping

An across-track interferometric (XTI) SAR has the capability of determining the three dimensional target location from the recorded radar echos thus providing high spatial resolution both horizontally and vertically. The output of an XTI SAR will typically include both a radar backscatter map and a digital elevation model (DEM). The accuracy of the derived DEM is determined by factors such as data acquisition geometry, signal-to-noise ratio, knowledge of platform position and attitude as well as the accuracy of the processing system. In the summer of 1992 the authors acquired TOPSAR data over the Ft. Irwin area in California, a desert area with significant relief (height standard deviation 150 m). Very accurate DEM's have been derived for this area by the Topographic Engineering Center (TEC) using digital correlation methods on 1:20,000 scale digitized photographs. Corner reflectors were deployed in the area, and their locations were determined to cm accuracies by the Defense Mapping Agency (DMA) using differential GPS techniques. DEM's generated from the acquired radar data have been rotated and translated to overlay the reference DEM's provided by TEC. A detailed description of the errors and their characteristics will be given. The standard deviations of the radar data sets we acquired measured over a 5.6 by 7 km area were 1.9 and 2.3 m. The corresponding numbers for flat areas were 1.1 and 2.0 m and for mountain areas 3.3 and 2.2 m.

Madsen, Soren N.↗

NASA NTRS1993

Discharge rates in Ma'adim Vallis, Mars

A digital elevation model (DEM) of a small part of the Martian channel Ma'adim Vallis was produced using the Frankot and Chellappa shape-from-shading algorithm. Software developed by the Dept. of Photogrammetry and Surveying at University College London uses this technique to extract slope information from the grey levels of image pixels. This technique was applied to a Viking Orbiter image of part of Ma'adim Vallis, and measurements of the channel depth and bed-slope of a channel incised into the floor of Ma'adim Vallis were made. These results were used to calculate order of magnitude estimates for discharge rates through the channel. The maximum values calculated are three orders of magnitude less than those for N. Kasei Vallis and are similar to values cited for the Missoula floods. However, when more realistic values of the water depth are used, discharge rates comparable with those for the Mississippi River result.

Thornhill, G. D.↗

NASA NTRS1993

Techniques and applications of SAR interferometry for ERS-1

The ERS-1 Synthetic Aperture Radar (SAR) demonstrated that it is possible to measure high resolution topography over large areas using interferometry with repeat orbit data sets. Given that the ERS-1 orbit is known with high precision, an automatic system for generation of interferograms is presented. Least squares estimation using ground control points provides an accurate method for determining the precise interferometric baseline. The system parameters which affect the accuracy of the Digital Elevation Models (DEM's) are errors in the interferometric baseline, decorrelation caused by baseline separation, thermal noise, and surface change. An adaptive filter based on the local interferometric coherence was developed to improve phase unwrapping of the interferogram. Final accuracies of the DEM's generated for single scene pairs in Alaska (U.S.) and Bonn (Germany) are on the order of 5 to 10 m.

Werner, Charles L.↗

NASA NTRS1994

Venus surface roughness and Magellan stereo data

Presented are results of some studies to develop tools useful for the analysis of Venus surface shape and its roughness. Actual work was focused on Maxwell Montes. The analyses employ data acquired by means of NASA's Magellan satellite. The work is primarily concerned with deriving measurements of the Venusian surface using Magellan stereo SAR. Roughness was considered by means of a theoretical analyses based on digital elevation models (DEM's), on single Magellan radar images combined with radiometer data, and on the use of multiple overlapping Magellan radar images from cycles 1, 2, and 3, again combined with collateral radiometer data.

Maurice, Kelly E.↗

NASA NTRS1993

AVIRIS and TIMS data processing and distribution at the land processes distributed active archive center

The U.S. Government has initiated the Global Change Research program, a systematic study of the Earth as a complete system. NASA's contribution of the Global Change Research Program is the Earth Observing System (EOS), a series of orbital sensor platforms and an associated data processing and distribution system. The EOS Data and Information System (EOSDIS) is the archiving, production, and distribution system for data collected by the EOS space segment and uses a multilayer architecture for processing, archiving, and distributing EOS data. The first layer consists of the spacecraft ground stations and processing facilities that receive the raw data from the orbiting platforms and then separate the data by individual sensors. The second layer consists of Distributed Active Archive Centers (DAAC) that process, distribute, and archive the sensor data. The third layer consists of a user science processing network. The EOSDIS is being developed in a phased implementation. The initial phase, Version 0, is a prototype of the operational system. Version 0 activities are based upon existing systems and are designed to provide an EOSDIS-like capability for information management and distribution. An important science support task is the creation of simulated data sets for EOS instruments from precursor aircraft or satellite data. The Land Processes DAAC, at the EROS Data Center (EDC), is responsible for archiving and processing EOS precursor data from airborne instruments such as the Thermal Infrared Multispectral Scanner (TIMS), the Thematic Mapper Simulator (TMS), and Airborne Visible and Infrared Imaging Spectrometer (AVIRIS). AVIRIS, TIMS, and TMS are flown by the NASA-Ames Research Center ARC) on an ER-2. The ER-2 flies at 65000 feet and can carry up to three sensors simultaneously. Most jointly collected data sets are somewhat boresighted and roughly registered. The instrument data are being used to construct data sets that simulate the spectral and spatial characteristics of the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) instrument scheduled to be flown on the first EOS-AM spacecraft. The ASTER is designed to acquire 14 channels of land science data in the visible and near-IR (VNIR), shortwave-IR (SWIR), and thermal-IR (TIR) regions from 0.52 micron to 11.65 micron at high spatial resolutions of 15 m to 90 m. Stereo data will also be acquired in the VNIR region in a single band. The AVIRIS and TMS cover the ASTER VNIR and SWIR bands, and the TIMS covers the TIR bands. Simulated ASTER data sets have been generated over Death Valley, California, Cuprite, Nevada, and the Drum Mountains, Utah using a combination of AVIRIS, TIMS, amd TMS data, and existing digital elevation models (DEM) for the topographic information.

Mah, G. R.↗

NASA NTRS1993

Current and future use of TOPSAR digital topographic data for volcanological research

In several investigations of volcanoes, high quality digital elevation models (DEM's) are required to study either the geometry of the volcano or to investigate temporal changes in relief due to eruptions. Examples include the analysis of volume changes of a volcanic dome, the prediction of flow paths for pyroclastic flows, and the quantitative investigation of the geometry of valleys carved by volcanic mudflows. Additionally, to provide input data for models of lava flow emplacement, accurate measurements are needed of the thickness of lava flows as a function of distance from the vent and local slope. Visualization of volcano morphology is also aided by the ability to view a DEM from oblique perspectives. Until recently, the generation of these DEM's has required either high resolution stereo air photographs or extensive field surveying using the Global Positioning System (GPS) and other field techniques. Through the use of data collected by the NASA/JPL TOPSAR system, it is now possible to remotely measure the topography of volcanoes using airborne radar interferometry. TOPSAR data can be collected day or night under any weather conditions, thereby avoiding the problems associated with the derivation of DEM's from air photographs that may often contain clouds. Here we describe some of our initial work on volcanoes using TOPSAR data for Mt. Hekla (Iceland) and Vesuvius (Italy). We also outline various TOPSAR topographic studies of volcanoes in the Galapagos and Hawaii that will be conducted in the near future, describe how TOPSAR complements the volcanology investigations to be conducted with orbital radars (SIR-C/X-SAR, JERS-1 and ERS-1), and place these studies into the broader context of NASA's Global Change Program.

Mouginis-Mark, Peter J.↗

NASA NTRS1995

Bayes classification of interferometric TOPSAR data

We report the Bayes classification of terrain types at different sites using airborne interferometric synthetic aperture radar (INSAR) data. A Gaussian maximum likelihood classifier was applied on multidimensional observations derived from the SAR intensity, the terrain elevation model, and the magnitude of the interferometric correlation. Training sets for forested, urban, agricultural, or bare areas were obtained either by selecting samples with known ground truth, or by k-means clustering of random sets of samples uniformly distributed across all sites, and subsequent assignments of these clusters using ground truth. The accuracy of the classifier was used to optimize the discriminating efficiency of the set of features that was chosen. The most important features include the SAR intensity, a canopy penetration depth model, and the terrain slope. We demonstrate the classifier's performance across sites using a unique set of training classes for the four main terrain categories. The scenes examined include San Francisco (CA) (predominantly urban and water), Mount Adams (WA) (forested with clear cuts), Pasadena (CA) (urban with mountains), and Antioch Hills (CA) (water, swamps, fields). Issues related to the effects of image calibration and the robustness of the classification to calibration errors are explored. The relative performance of single polarization Interferometric data classification is contrasted against classification schemes based on polarimetric SAR data.

Michel, T. R.↗

NASA NTRS1994

A structural fabric defined by topographic lineaments: Correlation with Tertiary deformation of Ellesmere and Axel Heiberg Islands, Canadian Arctic

Digital topographic contours from four 1:250000 scale maps have been gridded to produce a digital elevation model for part of Ellesmere and Axel Heiberg islands in the Canadian Arctic Islands. Gradient calculations were used to define both east and west dipping slopes defining a pattern of lineaments that have been compared with mapped geological structures. In ice-covered areas, where geological mapping was not possible, well-defined topographic lineaments have been identified and are correlated to extensions of major structural features. The northeast-southwest patterns of both topographic lineaments and mapped structures are strongly unimodal and support a single compressive event oriented at 67 deg west of north. This orientation is coincidental with the convergence direction calculated from the kinematic poles of rotation for Greenland relative to North America between 56 and 35 Ma. A minor secondary peak at 70 east of north is observed for thrust and normal fault solutions and is not directly related to the predicted convergence direction. Whether this represents a unique phase of deformation or is a subcomponent of a single event is not known. The agreement of structural components, lineament orientations, and convergence direction suggests an overwhelming over print of Eurekan deformation on any preexisting structural fabric. This study confirms, for the first time, an excellent compatibility between geological and geophysical constraints for the timing and geometry of the Eurekan orogeny.

Oakey, Gordon↗

NASA NTRS1996

An Automated Mapping Processor using C-Band Interferometric SAR Data

We describe a processor which has been implemented to generate map products starting from C-band interferometric data. The first stage of the processor consists of the conventional interferometric synthetic aperture radar (SAR) processing producing a digital elevation model (DEM) and a SAR brightness image in sensor coordinates. In the second stage of processing, a land use classification map is obtained by using the DEM, brightness, and interferometric correlation layers. Auxiliary layers which include a drainage layer, a height gradient layer, a height error layer, an estimated penetration layer, and a shaded relief layer are also computed. In the final step, all UTM collocated layers are combined in a geographical information system (GIS) which allows for both hard copy map products and digital applications.

Rodriguez, E.↗

NASA NTRS1997

Detecting Small-Scale Topographic Changes and Relict Geomorphic Features on Barrier Islands Using SAR

The shapes and elevations of barrier islands may change dramatically over a short period of time during a storm. Coastal scientists and engineers, however, are currently unable to measure these changes occurring over an entire barrier island at once. This three-year project, which is funded by NASA and jointly conducted by the Bureau of Economic Geology and the Center for Space Research at The University of Texas at Austin, is designed to overcome this problem by developing the use of interferometry from airborne synthetic aperture radar (AIRSAR) to measure coastal topography and to detect storm-induced changes in topography. Surrogate measures of topography observed in multiband, fully polarimetric AIRSAR (This type of data are now referred to as POLSAR data.) are also being investigated. Digital elevation models (DEM) of Galveston Island and Bolivar Peninsula, Texas obtained with Topographic SAR (TOPSAR) are compared with measurements by Global Positioning System (GPS) ground surveys and electronic total station surveys. In addition to topographic mapping, this project is evaluating the use of POLSAR to detect old features such as storm scarps, storm channels, former tidal inlets, and beach ridges that have been obscured by vegetation, erosion, deposition, and artificial filling. We have also expanded the work from the original proposal to include the mapping of coastal wetland vegetation and depositional environments. Methods developed during this project will provide coastal geologists with an unprecedented tool for monitoring and understanding barrier island systems. This understanding will improve overall coastal management policies and will help reduce the effects of natural and man-induced coastal hazards. This report summarizes our accomplishments during the second year of the study. Also included is a discussion of our planned activities for year 3 and a revised budget.

Gibeaut, James C.↗

NASA NTRS1996

Geocoding of AIRSAR/TOPSAR SAR Data

It has been demonstrated and recognized that radar interferometry is a promising method for the determination of digital elevation information and terrain slope from Synthetic Aperture Radar (SAR) data. An important application of Interferometric SAR (InSAR) data in areas with topographic variations is that the derived elevation and slope can be directly used for the absolute radiometric calibration of the amplitude SAR data as well as for scattering mechanisms analysis. On the other hand polarimetric SAR data has long been recognized as permitting a more complete inference of natural surfaces than a single channel radar system. In fact, imaging polarimetry provides the measurement of the amplitude and relative phase of all transmit and receive polarizations. On board the NASA DC-8 aircraft, NASA/JPL operates the multifrequency (P, L and C bands) multipolarimetric radar AIRSAR. The TOPSAR, a special mode of the AIRSAR system, is able to collect single-pass interferometric C- and/or L-band VV polarized data. A possible configuration of the AIRSAR/TOPSAR system is to acquire single-pass interferometric data at C-band VV polarization and polarimetric radar data at the two other lower frequencies. The advantage of this system configuration is to get digital topography information at the same time the radar data is collected. The digital elevation information can therefore be used to correctly calibrate the SAR data. This step is directly included in the new AIRSAR Integrated Processor. This processor uses a modification of the full motion compensation algorithm described by Madsen et al. (1993). However, the Digital Elevation Model (DEM) with the additional products such as local incidence angle map, and the SAR data are in a geometry which is not convenient, since especially DEMs must be referred to a specific cartographic reference system. Furthermore, geocoding of SAR data is important for multisensor and/or multitemporal purposes. In this paper, a procedure to geocode the new AIRSAR/TOPSAR data is presented. As an example an AIRSAR/TOPSAR image acquired in 1994 is geocoded and evaluated in terms of geometric accuracy.

Holecz, Francesco↗

NASA NTRS1996

An Automated Mapping Processor Using C-Band Interferometric SAR Data

We present the description of a processor which has been implemented to generate map products starting from C-band interferometric data. The first stage of the processor consists of the conventional interferometric SAR processing producing a Digital Elevation Model (DEMs) and a SAR brightness image in sensor coordinates. In the second stage of processing, a land use classification map is obtained by using the DEM, brightness, and interferometric correlation layers. Auxiliary layers which include a drainage layer, a height gradient layer, a height error layer, an estimated penetration layer, and a shaded relief layer are also computed. In the final step, all UTM collocated layers are combined in a GIS system which allows for both hard copy map products and for digital applications.

Rodriguez, E.↗

NASA NTRS1997

Interferometric SAR for observation of glacier motion and firn penetration

A digital elevation model (DEM) for a swath in west Greenland above Jakobshavn Isbrae derived from a number ERS-1 interferograms combined so as to reduce phase errors and other problems is presented. The DEM shows a wealth of kilometer-scale, dynamically supported topography, which arises from ice sheet flow over the rough bed. A correlation is shown between topography and interferometric phase due solely to ice sheet motion, which clearly shows the translations of scatterers in the surface up and downslope in the topography. Finally, the low correlation in interferograms of ice sheet dry snow zones motivates investigation on the depth-locus of backscattering. A scattering model is presented, including realistic firn grain size distributions and layering, which shows that layering helps to localize backscattering from dry firn to shallower depths than would otherwise be expected.

Winebrenner, Dale P.↗

NASA NTRS2000

Baseline Calibration of the GeoSAR Interferometric Mapping Instrument

GeoSAR is a dual frequency, X-Band and P-Band, interferometric mapping radar flown on a Gulfstream II with a nominal flying altitude of 10000 and a swath width of 10 km on both left and right sides of the aircraft. The radar is designed to generate high resolution and high accuracy digital elevation maps both above and below the vegetation canopy. In order to generate the high accuracy digital elevations models it is necessary to have extremely precise knowledge of the interferometric baseline, approximately .1 mm for the X-band system and 3 mm for the P-band system. Baseline knowledge to this level of accuracy is achieved through a combination of active baseline measurement using a Laser Baseline Metrology System (LBMS) and baseline calibration using an accurately surveyed array of corner reflectors. In this paper, we describe the LBMS system used to measure the dynamic component of the interferometric baseline and the least squares procedure used to estimate all three components of the interferometric baseline based on differences between calculated and surveyed corner reflector locations.

Hensley, Scott↗

NASA NTRS2000

Using Airborne Laser Altimetry to Detect Topographic Change at Long Valley Caldera California

The topography of the Long Valley caldera, California, was sampled using airborne laser altimetry in 1993, 1995, and 1997 to test the feasibility of using airborne laser altimetry for monitoring deformation of volcanic origin. Results show the laser altimeters are able to resolve subtle topographic features such as a gradual slope and to detect small transient changes in lake elevation. Crossover and repeat pass analyses of laser tracks indicate decimeter-level vertical precision is obtained over flat and low-sloped terrain for altimeter systems performing waveform digitization. Comparisons with complementary, ground-based CPS data at a site close to Bishop airport indicate that the laser and GPS-derived elevations agree to within the error inherent in the measurement and that horizontal locations agree to within the radius of the laser footprint. A comparison of the data at two sites, one where no change and the other where the maximum amount of vertical uplift is expected, indicates approximately 10 cm of relative uplift occurred 1993-1997, in line with predictions from continuous CPS measurements in the region. Extensive terrain mapping flights during the 1995 and 1997 missions demonstrate some of the unique abilities of laser altimetry; the straightforward creation of high resolution, high accuracy digital elevation models of overflown terrain, and the ability to determine ground topography in the presence of significant ground cover such as dense tree canopies. These capabilities make laser altimetry an attractive technique for quantifying topographic change of volcanic origin, especially in forested regions of the world where other remote sensing instruments have difficulty detecting the underlying topography.

Hofton, M. A.↗

NASA NTRS1999

Calibration of the Geosar Dual Frequency Interferometric SAR

GeoSAR is an airborne, interferometric Synthetic Aperture Radar (INSAR) system for terrain mapping, currently under development by a consortium including NASA's Jet Propulsion Laboratory (JPL), Calgis, Inc., and the California Department of Conservation (CalDOC) with funding provided by the Topographic Engineering Center (TEC) of the U.S. Army Corps of Engineers and the Defense Advanced Research Projects Agency (DARPA). The radar simultaneously maps swaths on both sides of the aircraft at two frequencies, X-Band and P-Band. For the P-Band system, data is collected for two across track interferometric baselines and at the crossed polarization. The aircraft position and attitude are measured using two Honeywell Embedded GPS Inertial Navigation Units (EGI) and an Ashtech Z12 GPS receiver. The mechanical orientation and position of the antennas are actively measured using a Laser Baseline Metrology System (LBMS). In the GeoSAR motion measurement software, these data are optimally combined with data from a nearby ground station using Ashtech PNAV software to produce the position, orientation, and baseline information are used to process the dual frequency radar data. Proper calibration of the GeoSAR system is essential to obtaining digital elevation models (DEMS) with the required sub-meter level planimetric and vertical accuracies. Calibration begins with the determination of the yaw and pitch biases for the two EGI units. Common range delays are determined for each mode, along with differential time and phase delays between channels. Because the antennas are measured by the LBMS, baseline calibration consists primarily of measuring a constant offset between mechanical center and the electrical phase center of the antennas. A phase screen, an offset to the interferometric phase difference which is a function of absolute phase, is applied to the interferometric data to compensate for multipath and leakage. Calibration parameters are calculated for each of the ten processing modes, each of the operational bandwidths (80 and 160 MHZ), and each aircraft altitude. In this talk we will discuss the layout calibration sites, the synthesis of data from multiple flights to improve the calibration, methods for determining time and phase delays, and techniques for determining radiometric and polarimetric quantities. We will describe how calibration quantities are incorporated into the processor and pre-processor. We will demonstrate our techniques applied to GeoSar data and assess the stability and accuracy of the calibration. This will be compared to the modeled performance determined from calibrating the output of a point target simulator. The details of baseline determination and phase screen calculation are covered in related talks.

Chapine, Elaine↗