SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The emission properties of lanthanum hexaboride in an atmosphere of nitrogen were investigated. The emitter was not poisoned by adsorbed nitrogen. This result should have application to magnetohydrodynamic devices in which electron flow from channel walls is required.
The Tropical Rainfall Measurement Mission (TRMM), a joint mission between the U.S. NASA and the Japans NASDA (National Space Development Agency), was successfully launched in November of 1997. On board of the TRMM satellite are two major microwave sensors, a real-aperture radar operating at 13.8 GHz, called the Precipitation Radar (PR), and a microwave radiometer system called TRMM Microwave Imager (TMI). The TMI contains five frequencies, ranging from 10.7 to 85 GHz, is designed to cover a wide dynamic range of rain intensities. The TMI measures the rain from the emission properties while the PR's measurement is based on the scattering of the hydrometeor. The two instruments aboard the same platform provide a complementary and synergistic measurement of precipitation. This paper will focus primarily on the TMI. The advent of microwave sensor technology in recent years, the addition of a new frequency (at 10.7 GHz), as well as the mission design, have enabled the TMI to be a superior instrument for the precipitation measurement. We will provide a description of the instrument together with some of its the design rationales and practical hardware implementation. We will also show the performance of TMI aboard the TRMM and some examples of its data.
Over the past few years, a few solid precipitation detection and retrieval algorithms have been developed and shown to be applicable for snowing clouds and blizzards. Current precipitating snow retrieval algorithms require the use of millimeter-wave radiometer observations. The millimeter-wave frequencies are especially sensitive to the scattering and emission properties of frozen particles due to the ice particle refractive index. These channels can also be used to discern information about the frozen particles above the melting layer. Passive radiometric channels respond to both the integrated particle mass throughout the volume and field of view, and to the amount, location, and size distribution of the frozen (and liquid) particles with the sensitivity varying for different frequencies and hydrometeor types. This work will show the percentage of the brightness temperature resulting from the liquid hydrometeor, frozen hydrometeor, relative humidity, and surface contributions. The focus will be on precipitating snow events and millimeter-wave frequencies however, other events and frequencies will be included in the analysis.
A simple inhomogeneous circuit model for a grid comprised of wires with circular cross section is derived and compared to measured observations. The proposed approximations are valid in the limit the geometric parameters for the grid are small compared to the wavelength of the incident radiation. Expressions for the emission, reflection, and transmission are provided. The accuracy of this circuit model is compared against full wave numerical simulations as a function of grid filling fraction. For perpendicular illumination of the grid the expressions used in the literature for zero thickness polarizers are recovered. For parallel illumination the influence of the finite wire thickness has a non-negectable influence on the emission properties of a wire grid polarizer is found.
We review the prompt emission properties of Swift BAT gamma-ray bursts (GRBs). We present the global properties of BAT GRBs based on their spectral and temporal characteristics. The BAT T90 and T50 durations peak at 80 and 20 s, respectively. The peak energy (Epeak) of about 60% of BAT GRBs is very likely to be less than 1.00 keV. We also present the BAT characteristics of GRBs with soft spectra, so called Xray flashes (XRFs). We will compare the BAT GRBs and XRFs parameter distribution to the other missions.
Doping of photocathodes with materials that have large piezoelectric coefficients has been proposed as an alternative means of increasing the desired photoemission of electrons. Treating cathode materials to increase emission of electrons is called "activation" in the art. It has been common practice to activate photocathodes by depositing thin layers of suitable metals (usually, cesium). Because cesium is unstable in air, fabrication of cesiated photocathodes and devices that contain them must be performed in sealed tubes under vacuum. It is difficult and costly to perform fabrication processes in enclosed, evacuated spaces. The proposed piezoelectrically enhanced photocathodes would have electron-emission properties similar to those of cesiated photocathodes but would be stable in air, and therefore could be fabricated more easily and at lower cost. Candidate photocathodes include nitrides of elements in column III of the periodic table . especially compounds of the general formula Al(x)Ga(1.x)N (where 0< or = x < or =.1). These compounds have high piezoelectric coefficients and are suitable for obtaining response to ultraviolet light. Fabrication of a photocathode according to the proposal would include inducement of strain in cathode layers during growth of the layers on a substrate. The strain would be induced by exploiting structural mismatches among the various constituent materials of the cathode. Because of the piezoelectric effect in this material, the strain would give rise to strong electric fields that, in turn, would give rise to a high concentration of charge near the surface. Examples of devices in which piezoelectrically enhanced photocathodes could be used include microchannel plates, electron- bombarded charge-coupled devices, image tubes, and night-vision goggles. Piezoelectrically enhanced photocathode materials could also be used in making highly efficient monolithic photodetectors. Highly efficient and stable piezoelectrically enhanced, ultraviolet-sensitive photocathodes and photodetectors could be fabricated by use of novel techniques for growing piezoelectrically enhanced layers, in conjunction with thinning and dopant-selective etching techniques.
The launch of the Fermi mission has enabled critical improvements in the field of magnetars, in particular with the Gamma-ray Burst Monitor, which is a all sky high-energy transient detector (8 keV - 40 MeV). In the last six years, the instrument has detected emission from 8 sources, and co-discovered two in synergy with the Swift mission. I will present the 5-year GBM magnetar results, focusing on the burst emission properties (spectral and temporal) per source as well as comparisons across sources.
We examine systematically the observed X-ray luminosity jumps (or flares) from quiescent states in millisecond binary pulsars (MSBPs) and high-mass X-ray binary pulsars (HMXBPs). We rely on the published X-ray light curves of seven pulsars: four HMXBPs, two MSBPs and the ultraluminous X-ray pulsar M82 X-2. We discuss the physics of their flaring activities or lack thereof, paying special attention to their emission properties when they are found on the propeller line, inside the Corbet gap or near the light-cylinder barrier.We provide guiding principles for future interpretations of faint X-ray observations, as well as a method of constraining the propeller lines and the dipolar surfacemagnetic fields of pulsars using a variety of quiescent states. In the process, we clarify some disturbing inaccuracies that have made their way into the published literature.
Using an established classification technique, we leverage standard observations and analyses to predict the progenitors of gamma-ray bursts (GRBs). This technique, utilizing support vector machine (SVM) statistics, provides a more nuanced prediction than the previous two-component Gaussian mixture in duration of the prompt gamma-ray emission. Based on further covariance testing from Fermi-GBM, Swift-BAT, and Swift-XRT data, we find that our classification based only on prompt emission properties gives perspective on the recent evidence that mergers and collapsars exist in both “long” and “short” GRB populations.
Modern CW or pulse Superconducting RF (SRF) accelerators require efficient RF sources controllable in phase and power with a reduced cost. Therefore, utilization of the high-power CW magnetrons as RF sources in SRF accelerator projects was proposed in a number of works, e.g., [1, 2]. But typically, the CW magnetrons are designed as RF sources for industrial heating, and the lifetime of the tubes is not the first priority as it is required for high-energy accelerators. The high-power industrial CW magnetrons use the cathodes made of pure tungsten. The emission properties of the tungsten cathodes are not deteriorated much by electron and ion bombardments, but the latter causes sputtering of the cathode in the magnetron crossed fields. The sputtered cathode material covers the magnetron interior. This leads to sparks and discharges that limit the life of the magnetrons. We considered an analysis of magnetron failure modes vs. output power [3]. We developed a model of ionization of the residual gas in the magnetrons interaction space and simulated the spattering of the cathode in 100 kW CW magnetrons to estimate the life expectancy. Basing on results we proposed ways to increase the CW magnetrons longevity for SRF accelerators.
Recently, the KM3NeT Collaboration reported the detection of an ultra-high energy ($\sim 220$ PeV) neutrino event, KM3-230213A. In this work, we perform a detailed investigation into whether this event could originate from the diffuse neutrino flux produced by a class of pulsar-powered optical transients. In particular, we consider populations of ordinary supernovae (SNe), super-luminous supernovae (SLSNe), and luminous fast blue optical transients (LFBOTs) with a newly formed magnetar as the central engine. We discuss both the thermal electromagnetic and non-thermal neutrino emission from such sources. We scan the parameter space of the dipolar magnetic field strength and the initial spin period to determine characteristic optical emission properties and lightcurve timescales of these transients. Additionally, our scan identifies which classes of these transients can reproduce the required diffuse flux level and neutrino energies. Combining our results, we conclude that a diffuse neutrino flux from a population of LFBOTs can explain the KM3NeT event. Therefore, pulsar-powered optical transients may serve as promising sources for the current and upcoming high-energy and ultra-high energy neutrino telescopes.
Multipactor discharge is a nonlinear electron avalanche that limits the performance of high-power radio-frequency (RF) and vacuum electronic devices. Predicting multipactor susceptibility traditionally relies on Monte Carlo or particle-in-cell (PIC) simulations, which become computationally expensive for large parametric studies. In this work, we present a supervised machine-learning (ML) framework for prediction of multipactor susceptibility in a two-surface planar geometry. The models are trained using high-fidelity PIC simulation generated susceptibility data and learn the relationship between operational parameters, geometry, and material-dependent secondary electron emission properties. The proposed approach enables rapid reconstruction of susceptibility charts while preserving the physical structure of multipactor growth regions.
Observations of Jupiter's low frequency radio emissions collected over one month intervals before and after each Voyager encounter were analyzed. Compilations of occurrence probability, average power flux density and average sense of circular polarization are presented as a function of central meridian longitude, phase of Io, and frequency. The results are compared with ground based observations. The necessary geometrical conditions are preferred polarization sense for Io-related decametric emission observed by Voyager from above both the dayside and nightside hemispheres are found to be essentially the same as are observed in Earth based studies. On the other hand, there is a clear local time dependence in the Io-independent decametric emission. Io appears to have an influence on average flux density of the emission down to below 2 MHz. The average power flux density spectrum of Jupiter's emission has a broad peak near 9MHz. Integration of the average spectrum over all frequencies gives a total radiated power for an isotropic source of 4 x 10 to the 11th power W.
An extensive study of magnetoacoustic emission (MAE) properties has been performed over the past several years. As a result, the dependence of the spectral characteristics of MAE on certain microstructural variations and uniaxially applied stress in a particular type of low carbon steel are now well known. The embrittlement-causing concentration of certain atomic species, e. g., tin, sulphur, phosphorous etc., at the grain boundaries of this steel creates strong potential barriers resisting the motion of non-180 domain walls which is the source of MAE. (Since the only type of non-180 domain walls in this material are 90 domain walls, the term 90 domain wall will be used throughout this paper in place of non-180 domain wall.) An MAE burst produced during one-half cycle of a hysteresis loop at a low AC magnetic field frequency (e. g., 0.7 Hz) shows two sub-peaks; the leading peak is usually sharp and short-lived, while the trailing peak is usually smooth and long-lasting. It has been shown that the enhanced domain wall-defect interaction, due to the strengthened potential barriers, causes an increase in the asymmetry of the MAE signal by suppressing the leading sub-peak and amplifying the trailing sub-peak. This phenomena is due to the delayed motion of the 90 domain walls. The effect of a tensile stress applied parallel to the external AC magnetic field is to diminish the MAE. On the other hand, the amplitude of the MAE burst has been shown to be a non-monotonic function of the stress amplitude. Recently, our study has concentrated on obtaining quantitative values for parameters computed from the MAE spectra averaged over a sufficient number of cycles to achieve statistical stability. Nevertheless, certain fundamental elements of the MAE characteristics remain unexplained.
A brief overview of the lightning observables and environment is provided. A selective review is presented of those properties of lightning which might be useful as space observables.
Ground-based and airborne measurements of biomass-burning smoke particle optical properties, obtained with a view to aerosol-absorption properties, are presented as a function of time and atmospheric height. The wavelength dependence of the optical thickness can be explained by a log-normal size distribution, with particles' effective radius varying between 0.1 and 0.2 microns. The strong correlation noted between aerosol particle profile and CO profile indicates that smoke particulates constitute a good tracer for emission trace gases from tropical biomass burning.
ABSTRACT Broad absorption line quasars (BALQSOs) show strong signatures of powerful outflows, with the potential to alter the cosmic history of their host galaxies. These signatures are only seen in ∼10 per cent of optically selected quasars, although the fraction significantly increases in IR and radio selected samples. A proven physical explanation for this observed fraction has yet to be found, along with a determination of why this fraction increases at radio wavelengths. We present the largest sample of radio matched BALQSOs using the LOFAR Two-metre Sky Survey Data Release 2 and employ it to investigate radio properties of BALQSOs. Within the DR2 footprint, there are 3537 BALQSOs from Sloan Digital Sky Survey DR12 with continuum signal-to-noise ≥5. We find radio-detections for 1108 BALQSOs, with an important subpopulation of 120 LoBALs, an unprecedented sample size for radio matched BALQSOs given the sky coverage to date. BALQSOs are a radio-quiet population that show an increase of ×1.50 radio-detection fraction compared to non-BALQSOs. LoBALs show an increase of ×2.22 that of non-BALQSO quasars. We show that this detection fraction correlates with wind-strength, reddening, and C iv emission properties of BALQSOs and that these features may be connected, although no single property can fully explain the enhanced radio detection fraction. We create composite spectra for subclasses of BALQSOs based on wind strength and colour, finding differences in the absorption profiles of radio-detected and radio-undetected sources, particularly for LoBALs. Overall, we favour a wind-ISM interaction explanation for the increased radio-detection fraction of BALQSOs.
Explore the source record for details and available documents.