Search NASA⌕ Search

SEARCH · Search NASA

Results for “error correction.”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Majorana subsystem qubit codes that also correct odd-weight errors

Abstract A potential platform for topological quantum computation is the Majorana-based tetron architecture. Its building blocks are superconducting islands called tetrons, which host four Majorana zero modes. Existing error correcting codes can correct even-weight errors on tetrons. In a previous proposal by us, we had shown that incorporating tetrons in the stabilizer group allows us to correct a combination of odd-weight errors and even-weight errors on tetrons. In this work, we show that inclusion of tetrons in the gauge group lets us create subsystem codes from conventional Pauli stabilizer codes, which can correct both kinds of errors. Compared to the previous approach, the current approach lets us construct codes with fewer stabilizer generators. This leads to shorter fault-tolerant sequence length, and improves the fault-tolerant pseudothreshold by as much as 84%.

Physics↗

Mid-circuit correction of correlated phase errors using an array of spectator qubits

Scaling up invariably error-prone quantum processors is a formidable challenge. Although quantum error correction ultimately promises fault-tolerant operation, the required qubit overhead and error thresholds are daunting. In a complementary proposal, colocated, auxiliary “spectator” qubits act as in situ probes of noise and enable real-time, coherent corrections of data qubit errors. We used an array of cesium spectator qubits to correct correlated phase errors on an array of rubidium data qubits. By combining in-sequence readout, data processing, and feedforward operations, these correlated errors were suppressed within the execution of the quantum circuit. The protocol is broadly applicable to quantum information platforms and establishes key tools for scaling neutral-atom quantum processors: mid-circuit readout of atom arrays, real-time processing and feedforward, and coherent mid-circuit reloading of atomic qubits.

Science & Technology - Other Topics↗

Encoding an Oscillator into Many Oscillators

An outstanding challenge for quantum information processing using bosonic systems is Gaussian errors such as excitation loss and added thermal noise errors. Thus, bosonic quantum error correction is essential. Most bosonic quantum error correction schemes encode a finite-dimensional logical qubit or qudit into noisy bosonic oscillator modes. In this case, however, the infinite-dimensional bosonic nature of the physical system is lost at the error-corrected logical level. On the other hand, there are several proposals for encoding an oscillator mode into many noisy oscillator modes. However, these oscillator-into-oscillators encoding schemes are in the class of Gaussian quantum error correction. Therefore, these codes cannot correct practically relevant Gaussian errors due to the established no-go theorems that state that Gaussian errors cannot be corrected by using only Gaussian resources. Here, we circumvent these no-go results and show that it is possible to correct Gaussian errors by using Gottesman-Kitaev-Preskill (GKP) states as non-Gaussian resources. In particular, we propose a non-Gaussian oscillator-into-oscillators code, namely the GKP two-mode squeezing code, and demonstrate that it can quadratically suppress additive Gaussian noise errors in both the position and momentum quadratures except for a small sublogarithmic correction. Furthermore, we demonstrate that our GKP two-mode squeezing code is near optimal in the weak noise limit by proving via quantum information theoretic tools that quadratic noise suppression is optimal when we use two physical oscillator modes. Lastly, in this work we show that our non-Gaussian oscillator encoding scheme can also be used to correct excitation loss and thermal noise errors, which are dominant error sources in many realistic bosonic systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Radiometric correction of scatterometric wind measurements

Use of a spaceborne scatterometer to determine the ocean-surface wind vector requires accurate measurement of radar backscatter from ocean. Such measurements are hindered by the effect of attenuation in the precipitating regions over sea. The attenuation can be estimated reasonably well with the knowledge of brightness temperatures observed by a microwave radiometer. The NASA SeaWinds scatterometer is to be flown on the Japanese ADEOS2. The AMSR multi-frequency radiometer on ADEOS2 will be used to correct errors due to attenuation in the SeaWinds scatterometer measurements. Here we investigate the errors in the attenuation corrections. Errors would be quite small if the radiometer and scatterometer footprints were identical and filled with uniform rain. However, the footprints are not identical, and because of their size one cannot expect uniform rain across each cell. Simulations were performed with the SeaWinds scatterometer (13.4 GHz) and AMSR (18.7 GHz) footprints with gradients of attenuation. The study shows that the resulting wind speed errors after correction (using the radiometer) are small for most cases. However, variations in the degree of overlap between the radiometer and scatterometer footprints affect the accuracy of the wind speed measurements.

Source record↗

A NASA Perspective on Quantum Computing, with Ties to Operator Algebras

The talk will survey work done by the NASA Quantum Artificial Intelligence Laboratory (QuAIL), particularly algorithms and protocols in which operator algebras may play a role. The talk will focus on recent work advancing quantum error correction and error mitigation, and will touch on other topics related to quantum algorithms and funda- mental quantum physics.

Quantum Computing↗

Encoding Scheme Reduces Hardware Requirements

Shift register time-shared in proposed error-correcting code for tape-storage systems. Error-correcting code logic for blocks of 256-bit data words implemented by 14-stage-time-shared shift register, two 4,096bit RAM's and logic gates. Encoding and decoding logic implement generator polynomial that defines error-correcting code, and error correction based on algorithm also implemented by logic.

Sasnowitz, H.↗

A novel scheme for error field correction in permanent magnet stellarators

Stellarators offer a promising path towards fusion reactors, but their design and construction are complicated by stringent tolerance requirements on highly complex 3D coils. A potential way to simplify the engineering requirements for stellarators is to use simple planar toroidal field coils along with permanent magnet arrays to generate shaping fields. In order to ensure sufficient field accuracy while minimizing engineering complexity and system cost, new techniques are required to correct the field produced by the permanent magnet arrays to within requirements set by plasma physics. This work describes a novel correction method developed for this purpose. This analysis is applied to the design of a quasi-axisymmetric stellarator that employs a combination of permanent magnets and planar toroidal field coils to generate its magnetic field. Analysis techniques and initial results using the method for error correction on a proposed permanent magnet stellarator are shown, and it is demonstrated that the method successfully meets the design requirements of the project.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

On the Error Covariance Correction Step of an ESKF Attitude Update

The attitude states of an error-state Kalman filter (ESKF) behave differently than most other states in the system due to their multiplicative (rather than additive) nature. One way in which they differ is an error covariance correction step after an ESKF error reset, which is not required for, for example, position and velocity states. This covariance correction step is not intuitive, and it has only been recently derived for coordinate transform matrices. The author of this memo, however, found the provided derivation in [1] confusing due to a lack of clarity surrounding the invoked reference frames, and clarity is required as there are at least 4 different ways to parameterize small-angle attitude errors in an ESKF. Furthermore, while reproducing the work, the author of this memo found a more straightforward derivation that provides additional insight into the correction step. This memo offers a derivation of the attitude error covariance correction step of an ESKF, which pays specific attention to the coordinate reference frames.

97 MATHEMATICS AND COMPUTING↗

Method for correction of errors in observation angles for limb thermal emission measurements

Thermal emission measurements of the earth's stratospheric limb from space platforms require an accurate knowledge of the observation angles for retrieval of temperature and constituent distributions. Without the use of expensive stabilizing systems, however, most observational instruments do not meet the required pointing accuracies, thus leading to large errors in the retrieval of atmospheric data. This paper describes a self-constituent method of correcting errors in pointing angles by using information contained in the observed spectrum. Numerical results based on temperature inversions of synthetic thermal emission spectra with assumed random errors in pointing angles are presented.

Abbas, M. M.↗

System and methods for hardware-software cooperative pipeline error detection

An error reporting system utilizes a parity checker to receive data results from execution of an original instruction and a parity bit for the data. A decoder receives an error correcting code (ECC) for data resulting from execution of a shadow instruction of the original instruction, and data error correction is initiated on the original instruction result on condition of a mismatch between the parity bit and the original instruction result, and the decoder asserting a correctable error in the original instruction result.

97 MATHEMATICS AND COMPUTING↗

Ion Coulomb Crystals in Storage Rings for Quantum Information Science

Quantum information science is a growing field that promises to take computing into a new age of higher performance and larger scale computing as well as being capable of solving problems classical computers are incapable of solving. The outstanding issue in practical quantum computing today is scaling up the system while maintaining interconnectivity of the qubits and low error rates in qubit operations to be able to implement error correction and fault-tolerant operations. Trapped ion qubits offer long coherence times that allow error correction. However, error correction algorithms require large numbers of qubits to work properly. We can potentially create many thousands (or more) of qubits with long coherence states in a storage ring. For example, a circular radio-frequency quadrupole, which acts as a large circular ion trap and could enable larger scale quantum computing. Such a Storage Ring Quantum Computer (SRQC) would be a scalable and fault tolerant quantum information system, composed of qubits with very long coherence lifetimes. With computing demands potentially outpacing the supply of high-performance systems, quantum computing could bring innovation and scientific advances to particle physics and other DOE supported programs. Increased support of R$\&$D in large scale ion trap quantum computers would allow the timely exploration of this exciting new scalable quantum computer. The R$\&$D program could start immediately at existing facilities and would include the design and construction of a prototype SRQC. We invite feedback from and collaboration with the particle physics and quantum information science communities.

43 PARTICLE ACCELERATORS↗

An approximation to midcourse correction direction errors.

A new approximation to the components of midcourse correction direction errors is described that is more accurate than a previously used approximation. The calculation effort involved is much less than that for numerical integration. A comparison of numerical integration results with those of the new approximation is presented in a diagram.

Kibler, J. F.↗

Spectral Properties and Coding Transitions of Haar-Random Quantum Codes

A quantum error-correcting code with a nonzero error threshold undergoes a mixed-state phase transition when the error rate reaches that threshold. We explore this phase transition for Haar-random quantum codes, in which the logical information is encoded in a random subspace of the physical Hilbert space. We focus on the spectrum of the encoded system density matrix as a function of the rate of uncorrelated, single-qudit errors. For low error rates, this spectrum consists of well-separated bands, representing errors of different weights. As the error rate increases, the bands for high-weight errors merge. The evolution of these bands with increasing error rate is well described by a simple analytic ansatz. Using this ansatz, as well as an explicit calculation, we show that the threshold for Haar-random quantum codes saturates the hashing bound, and thus coincides with that for random stabilizer codes. For error rates that exceed the hashing bound, typical errors are uncorrectable, but postselected error correction remains possible until a much higher detection threshold. Postselection can in principle be implemented by projecting onto subspaces corresponding to low-weight errors, which remain correctable past the hashing bound.

decoherence↗

Matrix Encoding For Correction Of Errors

Method of matrix encoding and associated decoding provides for correction of errors in digital data recorded on magnetic tape. Intended specifically for use with commercial control circuit board and associated software making it possible to use video cassette recorder as backup for hard-disk memory of personal computer.

Dotson, Ronald S.↗

Simplified Correction Of Errors In Reed-Solomon Codes

New decoder realized by simplified pipeline architecture. Simplified procedure for correction of errors and erasures in Reed-Solomon codes expected to result in simpler decoding equipment. Development widens commercial applicability of Reed-Solomon codes, used to correct bursts of errors in digital communication and recording systems. Improved decoder less complex. Made more regular, simple, and suitable for implementation in both VLSI and software.

Truong, T. K.↗

Soft syndrome iterative decoding of quantum LDPC codes and hardware architectures

In practical quantum error correction implementations, the measurement of syndrome information is an unreliable step—typically modeled as a binary measurement outcome flipped with some probability. However, the measured syndrome is in fact a discretized value of the continuous voltage or current values obtained in the physical implementation of the syndrome extraction. In this paper, we use this “soft” or analog information to benefit iterative decoders for decoding quantum low-density parity-check (QLDPC) codes. Syndrome-based iterative belief propagation decoders are modified to utilize the soft syndrome to correct both data and syndrome errors simultaneously. We demonstrate the advantages of the proposed scheme not only in terms of comparison of thresholds and logical error rates for quasi-cyclic lifted-product QLDPC code families but also with faster convergence of iterative decoders. Additionally, we derive hardware (FPGA) architectures of these soft syndrome decoders and obtain similar performance in terms of error correction to the ideal models even with reduced precision in the soft information. The total latency of the hardware architectures is about 600 ns (for the QLDPC codes considered) in a 20 nm CMOS process FPGA device, and the area overhead is almost constant—less than 50% compared to min-sum decoders with noisy syndromes.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Fault-Tolerant Operation of Bosonic Qubits with Discrete-Variable Ancillae

Fault-tolerant quantum computation with bosonic qubits often necessitates the use of noisy discrete-variable ancillae. In this work, we establish a comprehensive and practical fault-tolerance framework for such a hybrid system and synthesize it with fault-tolerant protocols by combining bosonic quantum error correction (QEC) and advanced quantum control techniques. We introduce essential building blocks of error-corrected gadgets by leveraging ancilla-assisted bosonic operations using a generalized variant of path-independent quantum control. Using these building blocks, we construct a universal set of error-corrected gadgets that tolerate a single-photon loss and an arbitrary ancilla fault for four-legged cat qubits. Notably, our construction requires only dispersive coupling between bosonic modes and ancillae, as well as beam-splitter coupling between bosonic modes, both of which have been experimentally demonstrated with strong strengths and high accuracy. Moreover, each error-corrected bosonic qubit is comprised of only a single bosonic mode and a three-level ancilla, featuring the hardware efficiency of bosonic QEC in the full fault-tolerant setting. We numerically demonstrate the feasibility of our schemes using current experimental parameters in the circuit-QED platform. Finally, we present a hardware-efficient architecture for fault-tolerant quantum computing by concatenating the four-legged cat qubits with an outer qubit code utilizing only beam-splitter couplings. Our estimates suggest that the overall noise threshold can be reached using existing hardware. These developed fault-tolerant schemes extend beyond their applicability to four-legged cat qubits and can be adapted for other rotation-symmetrical codes, offering a promising avenue toward scalable and robust quantum computation with bosonic qubits. Published by the American Physical Society 2024

Physics↗