Search NASA⌕ Search

SEARCH · Search NASA

Results for “exclusive reactions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Formation of the N≡N Triple Bond from Reductive Coupling of a Paramagnetic Diruthenium Nitrido Compound

Construction of nitrogen–nitrogen triple bonds via homocoupling of metal nitrides is an important fundamental reaction relevant to a potential Nitrogen Economy. Here, we report that room temperature photolysis of Ru 2 (chp) 4 N 3 (chp– = 2-chloro-6-hydroxypyridinate) in CH 2 Cl 2 produces N 2 via reductive coupling of Ru2(chp)4N nitrido species. Computational analysis reveals that the nitride coupling transition state (TS) features an out-of-plane “zigzag” geometry instead of the anticipated planar zigzag TS. However, with intentional exclusion of dispersion correction, the planar zigzag TS geometry can also be found. Both the out-of-plane and planar zigzag TS geometries feature two important types of orbital interactions: (1) donor–acceptor interactions involving intermolecular donation of a nitride lone pair into an empty Ru–N π* orbital and (2) Ru–N π to Ru–N π* interactions derived from coupling of nitridyl radicals. The relative importance of these two interactions is quantified both at and after the TS. Our analysis shows that both interactions are important for the formation of the N–N σ bond, while radical coupling interactions dominate the formation of N–N π bonds. Comparison is made to isoelectronic Ru 2 -oxo compounds. Formation of an O–O bond via bimolecular oxo coupling is not observed experimentally and is calculated to have a much higher TS energy. As a result, the major difference between the nitrido and oxo systems stems from an extremely large driving force, ~–500 kJ/mol, for N–N coupling vs a more modest driving force for O–O coupling, –40 to –140 kJ/mol.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Monitoring Depolymerization in Mesopores Using Dynamic Properties of Polymeric Melt Accessed via Dielectric Spectroscopy

Traditional design principles for heterogeneous catalysis guide the use of catalytic particles with mesosized (∼2–50 nm) pores to increase the number of surface-active sites by way of an increased surface area. However, the entry of long-chain polymers into such pores may be significantly limited by the size and entanglement of polymers in the melt state, thereby decreasing the number of accessible sites. Assessment of catalyst performance from traditional reactor-based studies averages over intrapore reaction events as well as reactions on the surface of a particle, resulting in an inability to distinguish between differences in site accessibility and activity. Techniques that assess the intrapore performance can inform the design of future heterogeneous catalysts for polymer upcycling. In this work, we demonstrate the use of broadband dielectric spectroscopy to monitor depolymerization of a polymer melt within mesopores via changes in the segmental relaxation time scale of amorphous polymer chains. In particular, we highlight the use of an anodic aluminum oxide (AAO) membrane as a readily available model for catalyst pores with a well-characterized pore morphology. The decrease in the segmental relaxation (α-relaxation) time of the melt with increasing chain scission emerges as a measure of the extent of polymer deconstruction inside mesopores. To demonstrate the utility of this technique, we demonstrate the decomposition of two commercial poly(propylene carbonate) polymers with different decomposition rates within mesopores. As the polymers depolymerize, their segmental relaxation time decreases as the molecular weight decreases (as predicted by the Fox–Flory equation). The BDS-measured change in segmental relaxation time mirrors the expected trend based on change in molecular weight measured by size exclusion chromatography.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

PolyDODT: a macrocyclic elastomer with unusual properties

The effect of reaction conditions on the structure of poly(3,6-dioxa-1,8-octanedithiol) (polyDODT) made by Reversible Radical Recombination Polymerization (R3P) using triethylamine (TEA), H 2 O 2 and air was investigated. 800 MHz (1 and 2D) NMR was used to investigate the polymer structures. Sensitivity analysis provided direct evidence for high purity cyclic polyDODT up to M n ~ 100 000 g mol –1 . Here, comparative analysis by High Resolution Multidetector Size Exclusion Chromatography (SEC) using integrated data showed that the cycles had lower viscosity and were more compact (both for R g and R h ) than linear samples of similar molecular weight. However, differential data revealed unusual behavior. While lower molecular weight cyclic polymers eluted later and had lower intrinsic viscosity than their linear counterparts at the same molecular weight, at higher molecular weights the polymers showed strange behavior: both the diffusion coefficient measured by Quasielastic Light Scattering (QELS) and Mark–Houwink–Sakurada plots of intrinsic viscosity for linear and cyclic polyDODT were found to converge. R3P, an aqueous based “green” method is capable of producing polymers at the 10–100 g scale in the lab, which will allow more detailed studies of this new class of biodegradable elastomers so further experimentation can be performed to elucidate the reasons for the unusual findings.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Chain extension epoxide polymerization to well‐defined block polymers using a N‐Al Lewis pair catalyst

Block polyethers comprised of poly(propylene oxide) (PPO) and poly(ethylene oxide) (PEG or PEO) segments form the basis of ABA-type PEO-b-PPO-b-PEO poloxamer materials. The inverse architecture with an internal hydrophilic PEO segment flanked by hydrophobic blocks can be difficult to prepare with control of architecture by use of traditional anionic polymerization. These oxyanionic polymerizations are plagued by chain-transfer-to-monomer side reactions that occur with substituted epoxides such as propylene oxide (PO). Herein, we report a new method for the preparation of block polymers through a controlled polymerization involving a N-Al Lewis adduct catalyst and an aluminum alkoxide macroinitiator. The Lewis pair catalyst was able to chain-extend commercial PEO macroinitiators to prepare di-, tri-, and pentablock polyethers with low dispersity and reasonable monomer tolerance. Chain extension was confirmed using size exclusion chromatography and diffusion ordered nuclear magnetic resonance spectroscopy. In conclusion, the resulting block polymers were additionally analyzed with small-angle X-ray scattering to correlate the morphology to molecular architecture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Site-Selective Atomic Layer Deposition at Thermally Generated Surface Oxygen Vacancies on Rutile TiO 2

Unique atomic arrangements (i.e., defects) on material surfaces may exhibit distinctive reactivity that affords opportunities for selective surface chemistry exclusively at those sites. While theoretically appealing, site-selective atomic layer deposition (ALD) processes remain largely unrealized experimentally. Here we provide evidence for site-selective ALD that exclusively targets oxygen vacancies thermally generated at the surface of TiO 2 single crystals. High-resolution in situ ellipsometry reveals the nucleation behavior of dimethylaluminum isopropoxide (DMAI) and water at process conditions precisely tuned for selective hydroxylation of surface defects. An island growth model for nucleation and atomic force microscopy (AFM) imaging are consistent with a site-selective growth mechanism that depends on the surface oxygen vacancy density. This approach to direct ALD reactions at defective surface sites may provide future opportunities for targeted remediation of electronically imperfect interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Asymmetric dimerization of adenosine deaminase acting on RNA facilitates substrate recognition

Abstract Adenosine deaminases acting on RNA (ADARs) are enzymes that convert adenosine to inosine in duplex RNA, a modification that exhibits a multitude of effects on RNA structure and function. Recent studies have identified ADAR1 as a potential cancer therapeutic target. ADARs are also important in the development of directed RNA editing therapeutics. A comprehensive understanding of the molecular mechanism of the ADAR reaction will advance efforts to develop ADAR inhibitors and new tools for directed RNA editing. Here we report the X-ray crystal structure of a fragment of human ADAR2 comprising its deaminase domain and double stranded RNA binding domain 2 (dsRBD2) bound to an RNA duplex as an asymmetric homodimer. We identified a highly conserved ADAR dimerization interface and validated the importance of these sequence elements on dimer formation via gel mobility shift assays and size exclusion chromatography. We also show that mutation in the dimerization interface inhibits editing in an RNA substrate-dependent manner for both ADAR1 and ADAR2.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Crystal structure of Methanococcus jannaschii dihydroorotase with substrate bound

Here, we report the X-ray structural analysis of dihydroorotase from Methanococcus jannaschii co-crystallized with dihydroorotate at pH 6.5. The crystals are isomorphous with the crystals of the apoenzyme, with space group P3 2 21 and unit-cell dimensions a = b = 111.4, c = 101.2 Å. The structure was refined to R = 0.169 and R free = 0.186 at a resolution of 1.87 Å at room temperature. During crystallization the degradative reaction took place, and the electron density in the active site corresponds to the substrate carbamoyl aspartate. Carbamoyl aspartate interacts with the protein in the active site in a manner similar to that observed for Escherichia coli and human dihydroorotases. However, the flexible loop (residues 140–151) adopts both conformations in the crystal, loop-out and loop-in, with the loop-out conformation having higher occupancy. This contrasts with our expectations for the flexible loop to be exclusively in the loop-in conformation, which is the conformation that it adopts to stabilize the binding of the substrate in the known systems. Additional studies with substrate analogs that resemble carbamoyl aspartate and different crystallization conditions would provide further insight into the conformation of the flexible loop in this system.

Methanococcus jannaschii↗
NASA NTRS1979

Habitat and logistic support requirements for the initiation of a space manufacturing enterprise

A detailed scenario for the initiation of a space manufacturing enterprise using lunar materials to construct solar power satellites (SPS) was developed, with particular attention to habitat design and logistic support requirements. If SPS's can be constructed exclusively from lunar materials, the entire enterprise can be initiated in a 7 year period of launch activity (beginning as early as 1985) using the Space Shuttle and a low-cost, Shuttle-derived heavy lift vehicle. If additional chemical feedstocks must be imported from earth in significant quantities, it may be necessary to bring the next-generation launch vehicle (single-stage-to-orbit) into operation by 1991. The scenario presented features use of the mass-driver reaction engine for orbit-to-orbit transfer of cargos and makes extensive use of the expendable Shuttle external propellant tanks.

Vajk, J. P.↗
NASA NTRS2010

Utilization of Alternate Chirality Enantiomers in Microbial Communities

Our previous study of chirality led to interesting findings for some anaerobic extremophiles: the ability to metabolize substrates with alternate chirality enantiomers of amino acids and sugars. We have subsequently found that not just separate microbial species or strains but entire microbial communities have this ability. The functional division within a microbial community on proteo- and sugarlytic links was also reflected in a microbial diet with L-sugars and D-amino acids. Several questions are addressed in this paper. Why and when was this feature developed in a microbial world? Was it a secondary de novo adaptation in a bacterial world? Or is this a piece of genetic information that has been left in modern genomes as an atavism? Is it limited exclusively to prokaryotes, or does this ability also occur in eukaryotes? In this article, we have used a broader approach to study this phenomenon using anaerobic extremophilic strains from our laboratory collection. A series of experiments were performed on physiologically different groups of extremophilic anaerobes (pure and enrichment cultures). The following characteristics were studied: 1) the ability to grow on alternate chirality enantiomers -- L-sugars and D- amino acids; 2) Growth-inhibitory effect of alternate chirality enantiomers; 3) Stickland reaction with alternate chirality amino acids. The results of this research are presented in this paper.

Pikuta, Elena V.↗
DOE OSTI2026

A STUDY OF SHORT-RANGE CORRELATED PAIR FORMATION MECHANISMS

Short-Range Correlations (SRCs) refers to pairs of nucleons that are temporary high density fluctuations with high relative momenta and lower center-of-mass momenta com pared to the nuclear Fermi momentum (kF). SRCs account for 20–25% of the nucleons in medium to heavy nuclei, make up essentially all nucleons with momentum greater than kF, and contribute most of the kinetic energy carried by nucleons in nuclei. The existing semi-inclusive and exclusive measurements only cover a handful of light nu clei or heavy elements. This does not allow for a systematic study of the dependence of SRC pairs on nuclear mass and proton-neutron asymmetry. It also does not allow for insights into SRC pairing mechanisms. Therefore, we systematically studied the individual probabilities for finding SRC protons in symmetric and neutron-rich asymmetric nuclei d, 9Be, 10B, 11B, 12C, 40Ca, 48Ca, 54Fe, and 197Au. We measured the (e,e'p) reaction in kinematics dominated by scattering off mean-field nucleons (k = kF) and nucleons in SRC pairs (k = kF) at the Thomas Jefferson National Accelerator Facility (JLab) in Hall C of the Continuous Electron Beam Accelerator Facility (CEBAF) in the Fall of 2022. The measured results were used to determine the SRC pairing probabilities for protons to examine how pairing depends on nuclear mass, proton-neutron asymmetry, and nuclear shell structure. The extracted cross-section ratios were also compared to theoretical calculations. We found that SRC pair formation depends more on the nuclear shell structure with sharp increases locally within the general trend of a slower increase with larger A. We also found that intra-shell pairing has a much larger influence than inter-shell pairing. Comparisons to theory suggest that angular momentum selection rules are important to SRC pair formation and can provide new constraints for new theoretical models.

Swan, Noah [Old Dominion Univ., Norfolk, VA (Unite↗
DOE OSTI2020

Redox cycling-based detection of phenazine metabolites secreted from Pseudomonas aeruginosa in nanopore electrode arrays

The opportunistic pathogen Pseudomonas aeruginosa (P. aeruginosa) produces several redox-active phenazine metabolites, including pyocyanin (PYO) and phenazine-1-carboxamide (PCN), which are electron carrier molecules that also aid in virulence. In particular, PYO is an exclusive metabolite produced by P. aeruginosa, which acts as a virulence factor in hospital-acquired infections and is therefore a good biomarker for identifying early stage colonization by this pathogen. Here, we describe the use of nanopore electrode arrays (NEAs) exhibiting metal–insulator–metal ring electrode architectures for enhanced detection of these phenazine metabolites. The size of the nanopores allows phenazine metabolites to freely diffuse into the interior and access the working electrodes, while the bacteria are excluded. Consequently, highly efficient redox cycling reactions in the NEAs can be accessed by free diffusion unhindered by the presence of bacteria. This strategy yields low limits of detection, i.e. 10.5 and 20.7 nM for PYO and PCN, respectively, values far below single molecule pore occupancy, e.g. at 10.5 nM < n pore > ~ 0.082 per nanopore – a limit which reflects the extraordinary signal amplification in the NEAs. Furthermore, experiments that compared results from minimal medium and rich medium show that P. aeruginosa produces the same types of phenazine metabolites even though growth rates and phenazine production patterns differ in these two media. Here, the NEA measurement strategy developed here should be useful as a diagnostic for pathogens generally and for understanding metabolism in clinically important microbial communities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Reduction‐induced metal/oxide interfacial sites for selective CO 2 hydrogenation

Abstract The interfacial structures of bimetallic‐derived catalysts play an important role in promoting the activation of reactants such as CO 2 . In particular, both the physical property (e.g., local bonding environment) and the electronic property (e.g., oxidation state) can evolve from their native states under different environments, such as upon reduction and during the catalytic reaction. Hence, taking the CO 2 hydrogenation reaction over Rh‐based catalysts as a case study, the present work compares the interfacial structures in tuning the selectivity toward CH 4 or CO. The combination of ex situ and in situ characterization reveals two representative interfacial structures: the Rh/CeO x interface formed over Rh/CeO 2 is active and selective to produce CH 4 (~95%) by following a formate‐mediated pathway; in comparison, the InO x /Rh interface derived after reduction is active for CO 2 activation and enables a redox mechanism for the exclusive formation of CO (~100%). This work provides insights into the environment‐induced structural evolution at the metal−oxide interfaces, as well as the role of distinct interfacial active sites in tuning the selectivity of CO 2 hydrogenation.

10 SYNTHETIC FUELS↗
DOE OSTI2024

Styrene Thermal Decomposition and Its Reaction with Acetylene under Shock Tube Pyrolysis Conditions: an Experimental and Kinetic Modeling Study

Styrene is an important compound for polymer production and a key intermediate in gas-phase kinetics of polycyclic aromatic hydrocarbons (PAHs). For the first time, the pyrolysis of styrene with and without the presence of acetylene is investigated in a single-pulse shock tube coupled to gas chromatography and mass spectrometry. For each reaction system, quantitative speciation profiles are probed within the temperature range of 1100-1730 K, nominal pressure of 20 bar, and reaction duration of similar to 4 ms. A kinetic model is built to simulate the results. The model explains how styrene is consumed under high-pressure pyrolytic conditions, how the secondary chemistry of intermediate products affect subsequent PAH formation, and how acetylene addition alters the reaction pathways. Throughout the temperature range, styrene breakdown is dominated by the bimolecular interaction between styrene and hydrogen atom, which produces benzene+vinyl or phenyl and ethylene through the stabilization of 2-phenylethyl and its subsequent dissociation. As a result, large amounts of phenyl accumulate, which react with styrene to form C14H12 species while simultaneously releasing H atoms through addition/elimination reactions. The reactivity of fuel consumption is preserved by the regeneration of H atoms as chain carriers. Several C14H10 compounds are formed as a result of the following breakdown of the C14H12 isomers, particularly stilbene, 1,1-diphenyl ethylene, and 9-methyl-9H-fluorene. The presence of acetylene as a co-reactant with styrene allows the Hydrogen-Abstraction-Acetylene-Addition (HACA) pathway to proceed from phenyl radical to enhance the production of phenylacetylene at very low temperatures and acenaphthylene. This hinders the formation of C14H12 isomers, exclusive products from pure styrene dissociation by competing with the styrene+phenyl routes.

Kinetic Modeling↗
DOE OSTI2023

Critical Roles of Chalcogenide Anion on Strengthening Stability of Ni 2 Mo 6 Te 8 for Almost Exclusive Electrocatalysts Nitrate to Ammonia Conversion

Electrochemical hydrogenation of nitrate to ammonia using renewable electricity is a promising route for sustainability but lacks catalysts that can deliver balanced selectivity, activity, and durability. For this work, a new family of noble metal-free and high-performing Chevrel phase Ni 2 Mo 6 T 8 (T = S, Se, and Te) catalysts that have similar structural and textural properties and differ presumably only in chalcogenide anion is systematically studied. The side-by-side comparisons allow the uncovering of the critical roles of chalcogenide anions in impacting kinetic activities and long-term durability. The incorporation of anions with larger size and smaller electronegativity from sulfide to selenide and telluride invokes stronger inhibition of the otherwise competing hydrogen evolution reaction (HER) and steers the hydrogenation toward the selective formation of ammonia, thus improving both Faradic selectivity and the turnover frequency to high levels of 99.4% and 21.5 s –1 , respectively, on the Ni 2 Mo 6 Te 8 catalyst. More significantly, the bulkier anion in the Ni 2 Mo 6 T 8 catalyst kinetically inhibited the intercalation of electrolyte cations, a major degradation mechanism in the catalyst family examined here and delivered several times improved durability. Therefore, this study introduces novel active motifs for selective nitrate reduction and provides insights into the catalyst degradation mechanism and practical ways to improve durability.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Decay of the Λ(1405) hyperon to Σ 0 π 0 measured at GlueX

Among the light baryons, the J π = 1/2 - Λ(1405) hyperon is an important special case as it sits just below the $N\bar{K}$ threshold and decays almost exclusively to Σ π . Some long-standing hypotheses for Λ(1405) are that it could be a $N\bar{K}$ bound state or a Σ π continuum resonance. It may also be considered as a simple quark-model resonance, the P -wave companion of the Λ(1520). In recent years chiral unitary models have suggested that there are two isospin zero poles present in this mass region, and that the “line shape" of the Λ(1405) depends to what extent each of the two poles are stimulated in a given reaction. Below the $N\bar{K}$ threshold, the Λ(1405) decays to the three Σ π charge combinations. The Σ 0 π 0 mode is purely I = 0 and it is uncontaminated by complications arising from I = 1 scattering processes contributing to the reaction mechanism in the Σ + π - and Σ - π + decays. It is also not affected from production and decay of the nearby Σ 0 (1385) hyperon. The GlueX experiment at Jefferson Lab has been used to study the Λ(1405) → Σ 0 π 0 decay mode. We focus on the preliminary results of dσ/dM Σ 0 π 0 and fits to the line shape of the Λ(1405) region in the -( t - t min ) range 0 - 1.5 GeV 2 from analyzing the reaction γp → K + Λ * using the data collected during the first phase of the GlueX program.

Wickramaarachchi, Nilanga↗
DOE OSTI2024

O 2 -Dependence of reactions of 1,2-dimethoxyethanyl and 1,2-dimethoxyethanylperoxy isomers

Reaction mechanisms of Ṙ and ROȮ radicals derived from low-temperature oxidation of 1,2-dimethoxyethane (CH 3 O(CH 2 ) 2 OCH 3 ) were investigated using speciation from multiplexed photoionization mass spectrometry (MPIMS) measurements via Cl-initiated oxidation, in conjunction with electronic structure calculations. The experiments were conducted at 5 bar, from 450 K – 650 K, and O 2 concentrations from 1 · 10 14 cm –3 – 6 · 10 18 cm –3 to probe the effects on competing reaction channels of 1,2-dimethoxyethanyl (Ṙ) and 1,2-dimethoxyethanylperoxy (ROȮ) isomers. Several species were detected with photoionization spectral fitting – ethene, formaldehyde, methyl vinyl ether, and 2-methoxyacetaldehyde – and, as determined by electronic structure calculations, may form via unimolecular decomposition of 1,2-dimethoxyethanyl or 1,2-dimethoxyethanylperoxy. O 2 -dependent yield ratios show that the formation pathways for all species undergo a competition between O 2 -addition and unimolecular decomposition. Here, adiabatic ionization energies were also calculated and utilized along with exact mass determinations to infer contributions for other species derived exclusively from first- and second-O 2 -addition, including 1,2-dimethoxyethene, cyclic ethers, and dicarbonyls.

1,2-dimethoxyethane↗
NASA NTRS1991

In situ propellant production: Alternatives for Mars exploration

Current planning for the Space Exploration Initiative (SEI) recognizes the need for extraterrestrial resources to sustain long-term human presence and to attain some degree of self-sufficiency. As a practical matter, reducing the need to carry large supplies of propellant from Earth will make space exploration more economical. For nearly every round trip planned with conventional propulsion, the actual payload is only a small fraction - perhaps 10-15 percent - of the mass launched from Earth. The objective of this study was to analyze the potential application for SEI missions of propellants made exclusively from lunar or martian resources. Using such propellants could minimize or eliminate the cost of carrying propellant for surface excursion vehicles and return transfers through two high-energy maneuvers: Earth launch and trans-Mars injection. Certain chemical mono- and bipropellants are candidates for this approach; they could be recovered entirely from in situ resources on the Moon and Mars, without requiring a continuing Earth-based resupply of propellant constituents (e.g., fuel to mix with a locally obtained oxidizer) and, perhaps, with minimal need to resupply consumables (e.g., reagents or catalyst for process reactions). A complete assessment of the performance potential of these propellants must include the requirements for installation, operations, maintenance, and resupply of the chemical processing facility.

Stancati, Michael L.↗
DOE OSTI2024

Rapid-charging aluminium-sulfur batteries operated at 85 °C with a quaternary molten salt electrolyte

Molten salt aluminum-sulfur batteries are based exclusively on resourcefully sustainable materials, and are promising for large-scale energy storage owed to their high-rate capability and moderate energy density; but the operating temperature is still high, prohibiting their applications. Here we report a rapid-charging aluminium-sulfur battery operated at a sub-water-boiling temperature of 85°C with a tamed quaternary molten salt electrolyte. The quaternary alkali chloroaluminate melt – possessing abundant electrochemically active high-order Al-Cl clusters and yet exhibiting a low melting point – facilitates fast Al 3+ desolvation. A nitrogen-functionalized porous carbon further mediates the sulfur reaction, enabling the battery with rapid-charging capability and excellent cycling stability with 85.4% capacity retention over 1400 cycles at a charging rate of 1 C. Importantly, we demonstrate that the asymmetric sulfur reaction mechanism that involves formation of polysulfide intermediates, as revealed by operando X-ray absorption spectroscopy, accounts for the high reaction kinetics at such temperature wherein the thermal management can be greatly simplified by using water as the heating media.

25 ENERGY STORAGE↗