Search NASA⌕ Search

SEARCH · Search NASA

Results for “future projects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Resonant multiscalar production in the generic complex singlet model in the multi-TeV region

We develop benchmarks for resonant discalar production in the generic complex singlet scalar extension of the Standard Model (SM) with no additional symmetries, which contains two new scalars. These benchmarks maximize discalar resonant production modes at future 𝑝⁢𝑝 colliders: 𝑝⁢𝑝 → ℎ 2 → ℎ 1⁡ ℎ 1 , 𝑝⁢𝑝 → ℎ 2 → ℎ 1 ⁡ℎ 3 , and 𝑝⁢𝑝 → ℎ 2 → ℎ 3 ⁡ℎ 3 , where ℎ 1 is the observed SM-like Higgs boson and ℎ 2,3 are new scalars. The decays ℎ 2 → ℎ 1 ⁡ℎ 3 and ℎ 2 → ℎ 3 ⁡ℎ 3 may be the only way to discover ℎ 3 , leading to a discovery of two new scalars at once. Current LHC and projected future collider (HL-LHC, FCC-ee+HL-LHC, IL⁢C⁢500+HL-LHC) constraints on this model are used to produce benchmarks at the HL-LHC for ℎ 2 masses between 250 GeV and 1 TeV and a future 𝑝⁢𝑝 collider (FCC-hh) for ℎ 2 masses between 250 GeV and 12 TeV. We update the current LHC bounds on the singlet-Higgs boson mixing angle for these benchmarks. As the mass of ℎ 2 approaches the multi-TeV region, certain limiting behaviors of the maximum rates are uncovered due to theoretical constraints on the parameters. These limits, which can be derived analytically, are BR⁡(ℎ 2 → ℎ 1⁡ ℎ 1 ) → 0.25, BR⁡(ℎ 2 → ℎ 3 ⁡ℎ 3 ) → 0.5, and BR⁡(ℎ 2 → ℎ 1⁡ ℎ 3 ) → 0. It can also be shown that the maximum rates of 𝑝⁢𝑝 → ℎ 2 → ℎ 1 ⁡ℎ 1 and 𝑝⁢𝑝 → ℎ 2 → ℎ 3⁡ ℎ 3 approach the same value. Hence, all three ℎ 2 → ℎ 𝑖 ⁡ℎ 𝑗 decays are promising discovery modes for ℎ 2 masses at and below 𝒪⁡(1 TeV), while above 𝒪⁡(1 TeV) the decays ℎ 2 → ℎ 1 ⁡ℎ 1 and ℎ 2 → ℎ 3 ⁡ℎ 3 are more encouraging. We choose benchmark masses for ℎ 3 to produce a large range of decay signatures including multi-𝑏, multivector boson, and multi-SM-like Higgs production. As we will show, the behavior of the maximum rates leads to the surprising conclusion that in the multi-TeV region this model may be discovered in the Higgs quartet production mode via ℎ 2 → ℎ 3 ⁡ℎ 3 → 4⁢ℎ 1 decays before Higgs triple production is observed. The maximum di- and four Higgs production rates are similar in the multi-TeV range.

Extensions of Higgs sector↗
NASA NTRS2015

The Potential for Snow to Supply Human Water Demand in the Present and Future

Runoff from snowmelt is regarded as a vital water source for people and ecosystems throughout the Northern Hemisphere (NH). Numerous studies point to the threat global warming poses to the timing and magnitude of snow accumulation and melt. But analyses focused on snow supply do not show where changes to snowmelt runoff are likely to present the most pressing adaptation challenges, given sub-annual patterns of human water consumption and water availability from rainfall. We identify the NH basins where present spring and summer snowmelt has the greatest potential to supply the human water demand that would otherwise be unmet by instantaneous rainfall runoff. Using a multi-model ensemble of climate change projections, we find that these basins - which together have a present population of approx. 2 billion people - are exposed to a 67% risk of decreased snow supply this coming century. Further, in the multi-model mean, 68 basins (with a present population of more than 300 million people) transition from having sufficient rainfall runoff to meet all present human water demand to having insufficient rainfall runoff. However, internal climate variability creates irreducible uncertainty in the projected future trends in snow resource potential, with about 90% of snow-sensitive basins showing potential for either increases or decreases over the near-term decades. Our results emphasize the importance of snow for fulfilling human water demand in many NH basins, and highlight the need to account for the full range of internal climate variability in developing robust climate risk management decisions.

Mankin, Justin S.↗
DOE OSTI2025

Integrating the Mobility Energy Productivity Metric Into the Delaware Department of Transportation Statewide Model

The Mobility Energy Productivity (MEP) metric quantifies the quality of mobility at a given location and evaluates how changes in the transportation system impact mobility over time, such as through infrastructure investments. This study demonstrates the integration of the MEP metric into the Delaware Department of Transportation's (DelDOT's) transportation planning process by utilizing data from its statewide travel demand model. Specifically, the study assesses MEP for the 2020 baseline conditions and three alternative scenarios - 2030, Churchman, and Old Orchard - across multiple travel modes, including driving, walking, biking, and transit. The findings highlight that mobility and accessibility in Delaware are primarily supported by the driving mode, while transit services remain relatively limited, often ranking below biking and walking in many areas. In the 2030 scenario, where network operations and opportunities expand as projected, overall statewide accessibility declines, although Kent and Sussex counties experience improvements. The results from the Churchman and Old Orchard scenarios indicate that local network enhancements can positively influence accessibility, though primarily at a localized level, demonstrating MEP's capability to capture regional accessibility changes. Further, the National Renewable Energy Laboratory team successfully transferred MEP operational knowledge to the DelDOT team through dockerization, enabling DelDOT to independently run MEP for various scenarios of interest. Integrating MEP into DelDOT's planning framework supports future project evaluations and decision-making by incorporating access to opportunities as a key dimension of transportation system assessment.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2024

Understanding Decision-Relevant Regional Data Products: Workshop Report

A broad community of climate adaptation practitioners, stakeholders and policymakers rely on historical reconstructions and future projections of local to regional climate. To be of value to these users, climate data must be credible, salient, and authoritative (Cash et al. 2002). Namely, data must be consistent with our physical understanding of the global Earth system, must be relevant for informing the decision-making process, and must be backed by expert judgment. As more and more data products have become available, multiple challenges have emerged around the production, evaluation, selection, and use of these data products. Consequently, to ensure crucial decisions leverage the best possible historical and future physical climate data, there is a pressing need to develop a coordinated national climate data strategy that is inclusive of all relevant communities of practice.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Carbon Capture Plant Front-End Engineering Design Study for Cement Manufacturing

The objective of this project was to conduct a Front-End Engineering Design (FEED) study for capturing carbon dioxide (CO₂) from cement plant flue gas using non-aqueous solvents (NAS) with a 95% capture efficiency. The study aimed to develop AACE (Association for the Advancement of Cost Engineering) Class 3 cost estimates for a commercial-scale CO₂ capture system with a capacity of 2.4 million tonnes of CO₂ per year (t-CO₂/yr). The results will provide Cemex and the U.S. Department of Energy with reliable data to support investment decisions, evaluate economic feasibility, and guide future project development and implementation.

20 FOSSIL-FUELED POWER PLANTS↗
NASA NTRS2022

Global Gridded Crop Models Underestimate Yield Responses to Droughts and Heatwaves

Extreme events can lead to crop yield declines, resulting in financial losses and threats to food security, and the frequency and intensity of such events is projected to increase. As global gridded crop models (GGCMs) are commonly used to assess climate change impacts on agricultural yields, there is a need to understand whether these models are able to reproduce the observed yield declines. We evaluated 13 GGCMs from the Inter-Sectoral Impact Model Intercomparison Project and compared observed and simulated impact of past droughts and heatwaves on yields for four crops (maize, rice, soy, wheat). We found that most models detect but underestimate the impact of droughts and heatwaves on yield. Specifically, the drought signal was detected by 12 of 13 models for maize and all models for wheat, while the heat signal was detected by eleven models for maize and six models for wheat. To investigate whether the difference between simulated and observed yield declines is due to a misrepresentation of simulated exposure to heat or water scarcity (i.e. misrepresentation of growing season), we analysed the relationship between average discrepancies between observed and simulated yield losses, and average simulated exposure to extreme weather conditions across all crop models. We found a positive correlation between simulated exposure to heat and model performance for heatwaves, but found no correlation for droughts. This suggests that there is a systematic underestimation of yield responses to heat and drought and not only a misrepresentation of exposure. Assuming that performance for the past indicates models' capacity to project future yield impacts, models likely underestimate future yield decline from climate change. High-quality temporally and spatially resolved observational data on growing seasons will be highly valuable to further improve crop models' capacity to adequately respond to extreme weather events.

extreme events↗
NASA NTRS2000

Message Mode Operations for Spacecraft: A Proposal for Operating Spacecraft During Cruise and Mitigating the Network Loading Crunch

The NASA Deep Space Network (DSN) is a world-class spacecraft tracking facility with stations located in Spain, Australia and USA, servicing Deep Space Missions of many space agencies. The current system of scheduling spacecraft during cruise for multiple 8 hour tracking sessions per week currently leads to an overcommitted DSN. Studies indicate that future projected mission demands upon the Network will only make the loading problem worse. Therefore, a more efficient scheduling of DSN resources is necessary in order to support the additional network loading envisioned in the next few years: The number of missions is projected to increase from 25 in 1998 to 34 by 2001. In fact given the challenge of the NASA administrator, Dan Goldin, of launching 12 spacecraft per year, the DSN would be tracking approximately 90 spacecraft by 2010. Currently a large amount of antenna time and network resources are subscribed by a project in order to have their mission supported during the cruise phase. The recently completed Mars Pathfinder mission was tracked 3 times a week (8 hours/day) during the majority of its cruise to Mars. This paper proposes an innovative approach called Message Mode Operations (MMO) for mitigating the Network loading problem while continuing to meet the tracking, reporting, time management, and scheduling requirements of these missions during Cruise while occupying very short tracking times. MMO satisfies these requirements by providing the following services: Spacecraft Health and Welfare Monitoring Service Command Delivery Service Adaptive Spacecraft Scheduling Service Orbit Determination Service Time Calibration Service Utilizing more efficient engineering telemetry summarization and filtering techniques on-board the spacecraft and collapsing the navigation requirements for Doppler and Range into shorter tracks, we believe spacecraft can be adequately serviced using short 10 to 30 minute tracking sessions. This claim assumes that certain changes would have to he made in the way the Network traditionally services missions in Cruise. Furthermore, limiting spacecraft to short sessions will free up larger blocks of time in the tracking schedule to help accommodate future tracking demands soon to be placed upon the Network. This paper describes the key characteristics and benefits of MMO, the operational scenarios for its use, the required changes to the ground system in order to make this approach feasible and the results of two simulations: 1) to determine the effects of MMO on projected mission loading on the DSN and, 2) to determine the effect MMO has on spacecraft orbit determination.

Greenberg, Ed↗
NASA NTRS2013

Overview of an Integrated Medical System for Exploration Missions

The Exploration Medical Capability (ExMC) element of the NASA Human Research Program (HRP) is charged with addressing the risk of unacceptable health and mission outcomes due to limitations of inflight medical capabilities. The Exploration Medical System Demonstration (EMSD) is a project within the ExMC element aimed at reducing this risk by improving the medical capabilities available for exploration missions. The EMSD project will demonstrate, on the ground and on ISS, the integration of several components felt to be essential to the delivery of medical care during long ]duration missions outside of low Earth orbit. The components of the EMSD include the electronic medical record, assisted medical procedure software, medical consumables tracking technology and RFID ] tagged consumables, video conferencing capability, ultrasound device and probes (ground demonstration only), peripheral biosensors, and the software to allow communication among the various components (middleware). This presentation seeks to inform our international partners of the goals and objectives of the EMSD and to foster collaboration opportunities related to this and future projects.

Watkins, Sharmila↗
NASA NTRSDate not supplied

Observations of the Age of Air from the Northern Hemisphere Midlatitude Surface

Understanding and modeling the interhemispheric transport (IHT) of trace gases and aerosols is important for interpreting past (and projecting future) changes in atmospheric composition. One IHT measure -- the mean age since air was last at the Northern Hemisphere (NH) midlatitude surface – represents a fundamental property of tropospheric transport that can be estimated from measurements of sulfur hexafluoride (SF6). Here we use SF6 measurements obtained from the recent NASA Atmospheric Tomography Mission (ATom) to construct observational estimates of the mean age throughout the troposphere. We compare the ATom based ages, which span all four seasons during the period 2016-2018 over both the Pacific and Atlantic Oceans, with previous in situ-based estimates obtained from the HIAPER Pole‐to‐Pole Observations (HIPPO) project, which are available only for the Pacific. In order to interpret the observed variations in mean age and their relationship with the large-scale flow we use simulations of the Goddard Earth Observing System (GEOS) general circulation model, constrained with meteorological fields derived from the Modern-Era Retrospective analysis for Research and Applications, Version 2 (MERRA-2), performed over the entire MERRA-2 period (including ATom). We confirm results from previous studies showing that the model ages are biased old compared to the observational estimates. However, we also show that this model bias is reduced in more recent years, which we interpret in terms of changes in the latitudinal distribution of SF6 emissions over the 2000s.

interhemispheric transport (IHT)↗
NASA NTRS2013

Uncertainty in Simulating Wheat Yields Under Climate Change

Projections of climate change impacts on crop yields are inherently uncertain1. Uncertainty is often quantified when projecting future greenhouse gas emissions and their influence on climate2. However, multi-model uncertainty analysis of crop responses to climate change is rare because systematic and objective comparisons among process-based crop simulation models1,3 are difficult4. Here we present the largest standardized model intercomparison for climate change impacts so far. We found that individual crop models are able to simulate measured wheat grain yields accurately under a range of environments, particularly if the input information is sufficient. However, simulated climate change impacts vary across models owing to differences in model structures and parameter values. A greater proportion of the uncertainty in climate change impact projections was due to variations among crop models than to variations among downscaled general circulation models. Uncertainties in simulated impacts increased with CO2 concentrations and associated warming. These impact uncertainties can be reduced by improving temperature and CO2 relationships in models and better quantified through use of multi-model ensembles. Less uncertainty in describing how climate change may affect agricultural productivity will aid adaptation strategy development and policymaking.

exhaust gases↗
NASA NTRS1965

Mariner IV Mission to Mars. Part I

This technical report is a series of individual papers documenting the Mariner-Mars project from its beginning in 1962 following the successful Mariner-Venus mission. Part I is pre-encounter data. It includes papers on the design, development, and testing of Mariner IV, as well as papers detailing methods of maintaining communication with and obtaining data from the spacecraft during flight, and expected results during encounter with Mars. Part 11, post-encounter data, to be published later, will consist of documentation of the events taking place during Mariner IV's encounter with Mars and thereafter. The Mariner-Mars mission, the culmination of an era of spacecraft development, has contributed much new technology to be used in future projects.

James, Jack N.↗
DOE OSTI2025

Machine learning and process-based modeling of spatiotemporal changes in active layer thickness across Alaska

Permafrost degradation poses a growing threat to infrastructure stability and ecosystem resilience in the rapidly warming Arctic. We investigated the spatiotemporal dynamics of active layer thickness (ALT) across Alaska by integrating field observations, environmental datasets, a physically based Stefan model, and machine learning (ML) techniques. Using weather projections from the Coupled Model Intercomparison Project Phase 6 under two Shared Socioeconomic Pathways (SSP 2-4.5 and SSP 5-8.5), we assessed ALT sensitivity to projected future weather conditions. The random forest (RF) model outperformed the Stefan approach in predicting ALT on the training dataset (R² = 0.84 vs. 0.53) but demonstrated lower generalizability on the test dataset (R² = 0.24 vs. 0.54). The root mean square error (RMSE) for the RF model for training and testing ranged from 14 to 22 cm, compared to 17 and 18 cm for the Stefan model. Variable importance analysis revealed that mean annual temperature and slope angle were the strongest predictors of ALT, accounting for 19% and 18% of the variance, respectively, followed by sediment transport index (14%) and stream power index (11%). Comparative analysis of baseline ALT predictions showed the Stefan model tended to project a thicker active layer (mean ± SD: 65 ± 16 cm), compared to the RF model (mean ± SD: 59 ± 8.8) cm). Both models indicated a latitudinal gradient in ALT, with shallower depths at higher latitudes. Projected ALT increases by 2100 were estimated at 3.3 ± 2.2 cm under SSP 2-4.5 and 5.9 ± 4.0 cm under SSP 5-8.5 for the ML model, whereas the Stefan model projected substantially larger increases of 13 ± 2.6 cm (SSP 2-4.5) and 28 ± 4.4 cm (SSP5-8.5). Spatial analysis showed the greatest ALT increases in northern Alaska, with relatively smaller changes in southern regions. These findings highlight the complex, multifactorial nature of ALT dynamics and the value of hybrid modeling approaches. As rising temperatures accelerate permafrost thaw, changes in ALT can disrupt ecosystems, damage infrastructures, and enhance the release of stored soil carbon, highlighting the urgent need for improved predictive capabilities to inform adaptation strategies in the Arctic.

Climate sciences↗
DOE OSTI2024

Safety Review of the Hydrogen Components of a Reference Design of the Wind-H2-Green Steel/Ammonia Project

The Department of Energy Hydrogen Fuel Cell Technology Office and Wind Energy Technologies Office's Wind-H2-Green Steel/Ammonia project is an initiative to demonstrate the feasibility and efficacy of GW-scale integrated energy systems. The team designed reference facilities that utilize wind- and solar-produced hydrogen for industrial steel and ammonia production. This novel concept warranted review of safety codes and standards as they apply to the designs and the identification of codes and standards gaps. This report reviews hydrogen production and storage codes and standards using reference design specifications from a Minnesota steel plant. Requirements, recommendations, and exclusions for the system were identified. Observed gaps included non-specific salt cavern storage requirements, electrolyzer capacity beyond regulated ranges, and lack of requirements for iron reduction via hydrogen. This report will aide future project design efforts and may provide a basis for safety reviews in new designs for industrial facilities with hydrogen production integration.

08 HYDROGEN↗
NASA NTRS1994

The Network Operations Control Center upgrade task: Lessons learned

This article synthesizes and describes the lessons learned from the Network Operations Control Center (NOCC) upgrade project, from the requirements phase through development and test and transfer. At the outset, the NOCC upgrade was being performed simultaneously with two other interfacing and dependent upgrades at the Signal Processing Center (SPC) and Ground Communications Facility (GCF), thereby adding a significant measure of complexity to the management and overall coordination of the development and transfer-to-operations (DTO) effort. Like other success stories, this project carried with it the traditional elements of top management support and exceptional dedication of cognizant personnel. Additionally, there were several NOCC-specific reasons for success, such as end-to-end system engineering, adoption of open-system architecture, thorough requirements management, and use of appropriate off-the-shelf technologies. On the other hand, there were several difficulties, such as ill-defined external interfaces, transition issues caused by new communications protocols, ambivalent use of two sets of policies and standards, and mistailoring of the new JPL management standard (due to the lack of practical guidelines). This article highlights the key lessons learned, as a means of constructive suggestions for the benefit of future projects.

Sherif, J. S.↗
DOE OSTI2024

Modeling Framework for the Assessment of a Sustainable Hydrogen Production and Supply Chain Network in California

The cost-effective and sustainable deployment of hydrogen supply and demand networks, especially in large economic regions like California, can be challenging considering the spatial-temporal availability and variability of the different actors across the network such as production processes, distribution modes, and end-users. In this presentation, we will provide an overview and demonstration of a modeling framework used to assess the environmental, economic, and human health impacts of plausible hydrogen production and supply chain networks in California. Scenarios focus on green hydrogen production pathways using water electrolysis and biomass gasification. End-use applications included in the model are transit, medium and heavy-duty trucking, port authorities, and power and aviation companies that currently consume natural gas, diesel, and aviation fuel for their day-to-day operation. Representative locations for hydrogen production and end-use are based on recent projections of the hydrogen economy in California. All mass and energy flows, as well as estimated emissions, are based on H2A process model designs and projections of technology performance, literature review, and LBNL process, economic and life cycle modeling, and not on company data for the sake of this presentation. Human health impacts are included following methodologies developed for the University of California Irvine HyDeal project. Life cycle phases associated with hydrogen production include feedstock preparation (water and biomass), energy production and consumption (renewable, grid, and combination of renewable and grid electricity), maintenance (chemical utilization in electrolysis and natural gas combustion in gasification), carbon sequestration, hydrogen storage (compression and liquefaction), and distribution (truck and pipeline). We apply the framework utilizing California specific emission factors, financial data, and human health damages and explore the impact of network characteristics on results. Example variations include: the inclusion of policy incentives or not, different representations of the electricity grid and source, electrolysis versus gasification versus combinations of both for production, liquefaction versus compression based on producer capacity cutoffs, transportation truck versus pipeline based on existing infrastructure, and ultimate end use. Comparison of these different scenarios can help inform future projects by demonstrating the trade-offs among environmental, economic, and human health impacts. This model, automated in R, is a starting platform upon which new analysis, modeling capabilities, locations, and emission factors can be rapidly tested and integrated.

Zaki, Mohammed Tamim↗
DOE OSTI2024

Safety Review of the Hydrogen Components of a Reference Design of the Wind-H2-Green Steel/Ammonia Project

The Department of Energy Hydrogen Fuel Cell Technology Office and Wind Energy Technologies Office’s Wind-H2-Green Steel/Ammonia project is an initiative to demonstrate the feasibility and efficacy of GW-scale integrated energy systems. The team designed reference facilities that utilize wind- and solar-produced hydrogen for industrial steel and ammonia production. This novel concept warranted review of safety codes and standards as they apply to the designs and the identification of codes and standards as they apply to the designs and the identification of codes and standards gaps. This report reviews hydrogen production and storage codes and standards using reference design specifications from a Minnesota steel plant. Requirements, recommendations, and exclusions for the system were identified. Observed gaps included non-specific salt cavern storage requirements, electrolyzer capacity beyond regulated ranges, and lack of requirements for iron reduction via hydrogen. This report will aide future project design efforts and may provide a basis for safety reviews in new designs for industrial facilities with hydrogen production integration.

08 HYDROGEN↗
NASA NTRS2011

ISS Solar Array Alpha Rotary Joint (SARJ) Bearing Failure and Recovery: Technical and Project Management Lessons Learned

The photovoltaic solar panels on the International Space Station (ISS) track the Sun through continuous rotating motion enabled by large bearings on the main truss called solar array alpha rotary joints (SARJs). In late 2007, shortly after installation, the starboard SARJ had become hard to turn and had to be shut down after exceeding drive current safety limits. The port SARJ, of the same design, had been working well for over 2 years. An exhaustive failure investigation ensued that included multiple extravehicular activities to collect information and samples for engineering forensics, detailed structural and thermal analyses, and a careful review of the build records. The ultimate root cause was determined to be kinematic design vulnerability coupled with inadequate lubrication, and manufacturing flaws; this was corroborated through ground tests, metallurgical studies, and modeling. A highly successful recovery plan was developed and implemented that included replacing worn and damaged components in orbit and applying space-compatible grease to improve lubrication. Beyond the technical aspects, however, lie several key programmatic lessons learned. These lessons, such as running ground tests to intentional failure to experimentally verify failure modes, are reviewed and discussed so they can be applied to future projects to avoid such problems.

DellaCorte, Christopher↗
NASA NTRS2017

Assessing Inter-Sectoral Climate Change Risks: The Role of ISIMIP

The aims of the Inter-Sectoral Impact Model Intercomparison Project (ISIMIP) are to provide a framework for the intercomparison of global and regional-scale risk models within and across multiple sectors and to enable coordinated multi-sectoral assessments of different risks and their aggregated effects. The overarching goal is to use the knowledge gained to support adaptation and mitigation decisions that require regional or global perspectives within the context of facilitating transformations to enable sustainable development, despite inevitable climate shifts and disruptions. ISIMIP uses community-agreed sets of scenarios with standardized climate variables and socioeconomic projections as inputs for projecting future risks and associated uncertainties, within and across sectors. The results are consistent multi-model assessments of sectoral risks and opportunities that enable studies that integrate across sectors, providing support for implementation of the Paris Agreement under the United Nations Framework Convention on Climate Change.

Regional-scale risk models↗