Search NASA⌕ Search

SEARCH · Search NASA

Results for “generalized least squared”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Sequential Least-Squares Using Orthogonal Transformations

Square root information estimation, starting from its beginnings in least-squares parameter estimation, is considered. Special attention is devoted to discussions of sensitivity and perturbation matrices, computed solutions and their formal statistics, consider-parameters and consider-covariances, and the effects of a priori statistics. The constant-parameter model is extended to include time-varying parameters and process noise, and the error analysis capabilities are generalized. Efficient and elegant smoothing results are obtained as easy consequences of the filter formulation. The value of the techniques is demonstrated by the navigation results that were obtained for the Mariner Venus-Mercury (Mariner 10) multiple-planetary space probe and for the Viking Mars space mission.

Bierman, G. J.↗
NASA NTRS1985

Middle Atmosphere Tides at Christchurch (44 Deg S, 17 Deg E) in November 1981 and May 1982

Atmospheric tides at Christchurch were measured at heights of 80 to 100 km, in 2.5 km intervals during the ATMAP campaigns of November 1981 and May 1982. Average components for the 5-day periods, November 19 to 23 and May 3 to 7, were extracted by making an equally weighted least squares fit to the hourly mean values, using the sum of mean, diurnal and semidiurnal terms. Estimates of standard deviation from the least squares fit tend to be less than the variability between successive 5-day samples, but 5 to 8 ms(-1) and 2 to 3 h are typical. At altitudes below 83 km there may be gaps of up to 6 hours during the night which may generate a systematic error in the components. Amplitude and phase characteristics are generally consistent with November 1980 and 1982 and May 1981, although the amplitude of the diurnal EW tide was low in November 1981, with consequent large phase fluctuations.

Fraser, G. J.↗
NASA NTRS1992

Coupled analysis of independently modeled finite element subdomains

A new method for analyzing plate and shell structures with two or more independently modeled finite element subdomains is presented, assessed, and demonstrated. This method provides a means of coupling local and global models whose grid points do not coincide along their common interface. In general, the method provides a means of coupling structural components (e.g., wing and fuselage) which may have been modeled by different analysis. In both cases, the need for transition modeling, which is often tedious and complicated, is eliminated. The coupling is accomplished through an interface for which three formulations are considered and presented. These formulations are: collocation, least-squares, and hybrid variational. Several benchmark problems were analyzed and, based on the results, the hybrid variational formulation is identified as the preferred formulation in that it provides the most accurate solutions.

Aminpour, M. A.↗
NASA NTRS2002

Construction of Response Surface with Higher Order Continuity and Its Application to Reliability Engineering

The usefulness of piecewise polynomials with C1 and C2 derivative continuity for response surface construction method is examined. A Moving Least Squares (MLS) method is developed and compared with four other interpolation methods, including kriging. First the selected methods are applied and compared with one another in a two-design variables problem with a known theoretical response function. Next the methods are tested in a four-design variables problem from a reliability-based design application. In general the piecewise polynomial with higher order derivative continuity methods produce less error in the response prediction. The MLS method was found to be superior for response surface construction among the methods evaluated.

Krishnamurthy, T.↗
NASA NTRS1994

A linear method for analyzing lightning field changes

A constrained, least-squares method for analyzing multiple-station measurements of lightning field changes (delta Es) is introduced. Previous methods have attempted to fit the spatial pattern of lightning delta Es using nonlinear models, such as a point charge (Q) or a point dipole (P) model. With the linear method, the delta Es are described not by models but by a general volume charge distribution that is deposited on a large (40 x 40 x 20 cu km) Cartesian grid above the measuring network. A linear system of equations is used to relate the measured delta Es to the charges that are deposited at each grid point. With this approach, the information content of the measurements can be quantified by an eigenanalysis of the covariance matrix of the linear system. Constraints can be used to reduce the infinity of possible solutions to the linear system and also to reduce systematic biases that can be introduced by the method of solution. It is shown that a Landweber iterative method, derived from the general method of steepest descent, can be used to solve the linear system and that the resulting volume charge distributions are generally consistent with computer-simulated charge sources, when these sources are over the measuring network. The Landweber iteration has also provided solutions for natural lightning events that are consistent with Q- and P-model results.

Koshak, William J.↗
NASA NTRS1983

Computer program for plotting and fairing wind-tunnel data

A detailed description of the Langley computer program PLOTWD which plots and fairs experimental wind-tunnel data is presented. The program was written for use primarily on the Langley CDC computer and CALCOMP plotters. The fundamental operating features of the program are that the input data are read and written to a random-access file for use during program execution, that the data for a selected run can be sorted and edited to delete duplicate points, and that the data can be plotted and faired using tension splines, least-squares polynomial, or least-squares cubic-spline curves. The most noteworthy feature of the program is the simplicity of the user-supplied input requirements. Several subroutines are also included that can be used to draw grid lines, zero lines, axis scale values and lables, and legends. A detailed description of the program operational features and each sub-program are presented. The general application of the program is also discussed together with the input and output for two typical plot types. A listing of the program code, user-guide, and output description are presented in appendices. The program has been in use at Langley for several years and has proven to be both easy to use and versatile.

Morgan, H. L., Jr.↗
NASA NTRS2011

A Comparison of Multivariate and Pre-Processing Methods for Quantitative Laser-Induced Breakdown Spectroscopy of Geologic Samples

The ChemCam instrument selected for the Curiosity rover is capable of remote laser-induced breakdown spectroscopy (LIBS).[1] We used a remote LIBS instrument similar to ChemCam to analyze 197 geologic slab samples and 32 pressed-powder geostandards. The slab samples are well-characterized and have been used to validate the calibration of previous instruments on Mars missions, including CRISM [2], OMEGA [3], the MER Pancam [4], Mini-TES [5], and Moessbauer [6] instruments and the Phoenix SSI [7]. The resulting dataset was used to compare multivariate methods for quantitative LIBS and to determine the effect of grain size on calculations. Three multivariate methods - partial least squares (PLS), multilayer perceptron artificial neural networks (MLP ANNs) and cascade correlation (CC) ANNs - were used to generate models and extract the quantitative composition of unknown samples. PLS can be used to predict one element (PLS1) or multiple elements (PLS2) at a time, as can the neural network methods. Although MLP and CC ANNs were successful in some cases, PLS generally produced the most accurate and precise results.

Anderson, R. B.↗
NASA NTRS2000

Evaluation of an Impedance Model for Perforates Including the Effect of Bias Flow

A new bias flow impedance model is developed for perforated plates from basic principles using as little empiricisms as possible. A quality experimental database was used to determine the predictive validity of the model. Results show that the model performs better for higher (15%) rather than lower (5%) percent open area (POA) samples. Based on the least squares ratio of numerical vs. experimental results, model predictions were on average within 20% and 30% for the higher and lower (POA), respectively. It is hypothesized on the work of other investigators that at lower POAs the higher fluid velocities in the perforate's orifices start forming unsteady vortices, which is not accounted for in our model. The numerical model, in general also underpredicts the experiments. It is theorized that the actual acoustic C(sub D) is lower than the measured raylometer C(sub D) used in the model. Using a larger C(sub D) makes the numerical model predict lower impedances. The frequency domain model derived in this paper shows very good agreement with another model derived using a time domain approach.

Betts, J. F.↗
NASA NTRS2019

A Mixed Integer Efficient Global Optimization Algorithm with Multiple Infill Strategy - Applied to a Wing Topology Optimization Problem

With the advancement in high performance computing and numerical optimization techniques,engineering design optimization problems are becoming more complex, larger scale,higher fidelity, and computationally more demanding, requiring longer run times than ever before. There exists methodologies and techniques that can address some of these challenges but very few can address all, and most are limited in the extent that these concerns can be addressed. With the goal of addressing such challenging engineering problems, we developed anew optimization framework, named AMIEGO, that combines concepts from surrogate-based optimization approaches, gradient-based numerical methods, Partial Least Squares, evolutionary algorithms, and Branch-and-Bound, providing newer capabilities that were not previouslyperceived. However, the original version of this framework, in the process of adaptive samplingto explore and exploit the design space, finds only a single sample point per iteration. The efforthere builds upon this previously developed optimization framework to include multiple infillsampling capability that combines the concept of generalized expected improvement function,unsupervised learning, and multi-objective evolutionary technique. To demonstrate, AMIEGOwith the multiple infill capability (called AMIEGO-MIMOS) solves a series of increasingly difficultengineering design optimization problems. The results reveal the performance of the newapproach is problem dependent. When applied to a ten-bar truss problem, the newly proposedmultiple infill strategy consistently leads to a better design solutions when compared to theexisting CPTV method (implemented with the context of the AMIEGO framework). On theother hand, when applied to a mixed-integer high fidelity wing topology optimization problem- MIMOS, despite showing a steeper convergence at the start, eventually leads to an inferiorsolution as compared to CPTV approach. These results also reveal that a small number ofstarting points, in general, are sufficient to lead to a good overall solution.

Mixed-integer optimization↗
NASA NTRS1987

Deconvolution of spectra for intimate mixtures

Visible to near infrared reflectance spectra of macroscopic mixtures have been shown to be linear combinations of the reflections of the pure mineral components in the mixture. However, for microscopic mixtures the mixing systematics are in general nonlinear. The systematics may be linearized by conversion of reflectance to single scattering albedo (w), where the equations which relate reflectance to w depend on the method of data collection. Several proposed mixing models may be used to estimate mineral abundances from the reflectance spectra of intimate mixtures. These models are summarized and a revised model is presented. A noniterative (linear) least squares approach was used for curve fitting and the data, measured as bi-directional reflectance with incidence and emergence angles of 30 and 0 deg were converted to w by a simplified version of Hapke's equation for bi-directional reflectance. This model was tested with two mixture series composed of 45 to 75 micron particles: an anorthite-enstatite series and an olivine-magnetite series. The data indicate that the simplified Hapke's equation may be used to convolve reflectance spectra into mineral abundances if appropriate endmembers are known or derived from other techniques. For surfaces that contain a significant component of very low albedo material, a somewhat modified version of this technique will need to be developed. Since the abundances are calculated using a noniterative approach, the application of this method is especially efficient for large spectral data sets, such as those produced by mapping spectrometers.

Mustard, John F.↗
NASA NTRS1989

The moments of inertia of Mars

The mean moment of inertia of Mars is, at present, very poorly constrained. The generally accepted value of 0.365 M(R-squared) is obtained by assuming that the observed second degree gravity field can be decomposed into a hydrostatic oblate spheroid and a nonhydrostatic prolate spheroid with an equatorial axis of symmetry. An alternative decomposition is advocated in the present analysis. If the nonhydrostatic component is a maximally triaxial ellipsoid (intermediate moment exactly midway between greatest and least), the hydrostatic component is consistent with a mean moment of 0.345 M(R-squared). The plausibility of this decomposition is supported by statistical arguments and comparison with the earth, moon and Venus.

Bills, Bruce G.↗
NASA NTRS2016

Unsteady Aerodynamic Force Sensing from Measured Strain

A simple approach for computing unsteady aerodynamic forces from simulated measured strain data is proposed in this study. First, the deflection and slope of the structure are computed from the unsteady strain using the two-step approach. Velocities and accelerations of the structure are computed using the autoregressive moving average model, on-line parameter estimator, low-pass filter, and a least-squares curve fitting method together with analytical derivatives with respect to time. Finally, aerodynamic forces over the wing are computed using modal aerodynamic influence coefficient matrices, a rational function approximation, and a time-marching algorithm. A cantilevered rectangular wing built and tested at the NASA Langley Research Center (Hampton, Virginia, USA) in 1959 is used to validate the simple approach. Unsteady aerodynamic forces as well as wing deflections, velocities, accelerations, and strains are computed using the CFL3D computational fluid dynamics (CFD) code and an MSC/NASTRAN code (MSC Software Corporation, Newport Beach, California, USA), and these CFL3D-based results are assumed as measured quantities. Based on the measured strains, wing deflections, velocities, accelerations, and aerodynamic forces are computed using the proposed approach. These computed deflections, velocities, accelerations, and unsteady aerodynamic forces are compared with the CFL3D/NASTRAN-based results. In general, computed aerodynamic forces based on the lifting surface theory in subsonic speeds are in good agreement with the target aerodynamic forces generated using CFL3D code with the Euler equation. Excellent aeroelastic responses are obtained even with unsteady strain data under the signal to noise ratio of -9.8dB. The deflections, velocities, and accelerations at each sensor location are independent of structural and aerodynamic models. Therefore, the distributed strain data together with the current proposed approaches can be used as distributed deflection, velocity, and acceleration sensors. This research demonstrates the feasibility of obtaining induced drag and lift forces through the use of distributed sensor technology with measured strain data. An active induced drag control system thus can be designed using the two computed aerodynamic forces, induced drag and lift, to improve the fuel efficiency of an aircraft. Interpolation elements between structural finite element grids and the CFD grids and centroids are successfully incorporated with the unsteady aeroelastic computation scheme. The most critical technology for the success of the proposed approach is the robust on-line parameter estimator, since the least-squares curve fitting method depends heavily on aeroelastic system frequencies and damping factors.

shape sensing↗
NASA NTRS1991

Free vibrations of delaminated beams

Free vibration of laminated composite beams is studied. The effect of interply delaminations on natural frequencies and mode shapes is evaluated both analytically and experimentally. The equation of motion and associated boundary conditions are derived for the free vibration of a composite beam with a delamination of arbitrary size and location. A generalized variational principle is used to formulate the equation of motion, taking into account the interlaminar stress concentration at the crack-tips. This is accomplished by introducing a 'crack function' into the beam's compatibility relations. This function has its maximum value at the crack tip and decays exponentially in the longitudinal direction. The rate of exponential decay is determined by a least-square fit with the experimental results. The effect of coupling between longitudinal vibration and bending vibration is considered in the present study. This coupling effect is found to significantly affect the natural frequencies and mode shapes of the delaminated beam.

Shen, M.-H. H.↗
NASA NTRS2001

Estimates of M2 Tidal Energy Dissipation from TOPEX/Poseidon Altimeter Data

Most of the tidal energy dissipation in the ocean occurs in shallow seas, as has long been recognized. However, recent work has suggested that a significant fraction of the dissipation, perhaps 1 TW or more, occurs in the deep ocean. This paper builds further evidence for that conclusion. More than 6 years of data from the TOPEX/Poseidon satellite altimeter are used to map the tidal dissipation rate throughout the world ocean. The dissipation rate is estimated as a balance between the rate of working by tidal forces and the energy flux divergence, computed using currents derived by least squares fitting of the altimeter data and the shallow water equations. Such calculations require dynamical assumptions, in particular about the nature of dissipation. To assess sensitivity of dissipation estimates to input assumptions, a large suite of tidal inversions based on a wide range of drag parameterizations and employing both real and synthetic altimeter data are compared. These experiments and Monte Carlo error fields from a generalized inverse model are used to establish error uncertainties for the dissipation estimates. Owing to the tight constraints on tidal elevation fields provided by the altimeter, area integrals of the energy balance are remarkably insensitive to required dynamical assumptions. Tidal energy dissipation is estimated for all major shallow seas (excluding individual polar seas) and compared with previous model and data-based estimates. Dissipation in the open ocean is significantly tnhanced around major bathymetric features, in a manner consistent with simple theories the generation of baroclinic tides.

Egbert, Gary D.↗
NASA NTRS1947

Free-Spinning and Tumbling Tests of a 1/16-Scale Model of the McDonnell XP-85 Airplane

The teat results showed that with either of the three tail arrangements, the model usually spun in flat attitudes with oscillations about the lateral and longitudinal axes. In general, full reversal of the rudder pedals did not stop the spinning rotation. To make the model satisfactorily meet-the spin-recovery requirements it was found that installation of either a very large ventral fin (l7.9 square feet, full scale) below the tail or a somewhat smaller ventral fin and rudder (12.4 square feet, total . full-scale area) with a rudder throw of at least +/-22deg was required. Either a 21.3-foot tail parachute or a 6.4-foot wing-tip parachute (drag coefficient approximately 0.70) appears necessary as an emergency spin-recovery device during demonstration spins.

Klinar, Walter J.↗
NASA NTRS1990

Linear regression in astronomy. I

Five methods for obtaining linear regression fits to bivariate data with unknown or insignificant measurement errors are discussed: ordinary least-squares (OLS) regression of Y on X, OLS regression of X on Y, the bisector of the two OLS lines, orthogonal regression, and 'reduced major-axis' regression. These methods have been used by various researchers in observational astronomy, most importantly in cosmic distance scale applications. Formulas for calculating the slope and intercept coefficients and their uncertainties are given for all the methods, including a new general form of the OLS variance estimates. The accuracy of the formulas was confirmed using numerical simulations. The applicability of the procedures is discussed with respect to their mathematical properties, the nature of the astronomical data under consideration, and the scientific purpose of the regression. It is found that, for problems needing symmetrical treatment of the variables, the OLS bisector performs significantly better than orthogonal or reduced major-axis regression.

Isobe, Takashi↗
NASA NTRS1990

Aerodynamic parameters of High-Angle-of attack Research Vehicle (HARV) estimated from flight data

Aerodynamic parameters of the High-Angle-of-Attack Research Aircraft (HARV) were estimated from flight data at different values of the angle of attack between 10 degrees and 50 degrees. The main part of the data was obtained from small amplitude longitudinal and lateral maneuvers. A small number of large amplitude maneuvers was also used in the estimation. The measured data were first checked for their compatibility. It was found that the accuracy of air data was degraded by unexplained bias errors. Then, the data were analyzed by a stepwise regression method for obtaining a structure of aerodynamic model equations and least squares parameter estimates. Because of high data collinearity in several maneuvers, some of the longitudinal and all lateral maneuvers were reanalyzed by using two biased estimation techniques, the principal components regression and mixed estimation. The estimated parameters in the form of stability and control derivatives, and aerodynamic coefficients were plotted against the angle of attack and compared with the wind tunnel measurements. The influential parameters are, in general, estimated with acceptable accuracy and most of them are in agreement with wind tunnel results. The simulated responses of the aircraft showed good prediction capabilities of the resulting model.

Klein, Vladislav↗