Search NASA⌕ Search

SEARCH · Search NASA

Results for “geometric programming”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Computer program for analysis of coupled-cavity traveling wave tubes

A flexible, accurate, large signal computer program was developed for the design of coupled cavity traveling wave tubes. The program is written in FORTRAN IV for an IBM 360/67 time sharing system. The beam is described by a disk model and the slow wave structure by a sequence of cavities, or cells. The computational approach is arranged so that each cavity may have geometrical or electrical parameters different from those of its neighbors. This allows the program user to simulate a tube of almost arbitrary complexity. Input and output couplers, severs, complicated velocity tapers, and other features peculiar to one or a few cavities may be modeled by a correct choice of input data. The beam-wave interaction is handled by an approach in which the radio frequency fields are expanded in solutions to the transverse magnetic wave equation. All significant space harmonics are retained. The program was used to perform a design study of the traveling-wave tube developed for the Communications Technology Satellite. Good agreement was obtained between the predictions of the program and the measured performance of the flight tube.

Connolly, D. J.↗
NASA NTRS1991

Numerical simulation of the helium gas spin-up channel performance of the relativity gyroscope

The dependence of the spin-up system efficiency on each geometrical parameter of the spin-up channel and the exhaust passage of the Gravity Probe-B (GPB) is individually investigated. The spin-up model is coded into a computer program which simulates the spin-up process. Numerical results reveal optimal combinations of the geometrical parameters for the ultimate spin-up performance. Comparisons are also made between the numerical results and experimental data. The experimental leakage rate can only be reached when the gap between the channel lip and the rotor surface increases beyond physical limit. The computed rotating frequency is roughly twice as high as the measured ones although the spin-up torques fairly match.

Karr, Gerald R.↗
NASA NTRS1972

Basic research and data analysis for the National Geodetic Satellite Program

Investigations of triangulation nets and scaling are reported. Adjustment of the BC-4 worldwide geometric satellite triangulation net is described, along with procedures for correcting type II data and the contents of magnetic tapes containing data from the Pageos network. Computational steps for the further reduction of partially reduced satellite image plate coordinates are outlined. The problem of improving existing triangulation systems by means of satellite super-control points was studied. The SAO-69 geometric solution was scaled with C-band radar data, resulting in SAO and C-band adjustment compatible with one another in the Western Hemisphere. The North America solution NA-6, obtained from GEOS 1 data, was readjusted with new heights as constraints on all 30 optical stations and is referred to as the NA-8 solution.

Source record↗
NASA NTRS1988

Cooperating knowledge-based systems

This final report covers work performed under Contract NCC2-220 between NASA Ames Research Center and the Knowledge Systems Laboratory, Stanford University. The period of research was from March 1, 1987 to February 29, 1988. Topics covered were as follows: (1) concurrent architectures for knowledge-based systems; (2) methods for the solution of geometric constraint satisfaction problems, and (3) reasoning under uncertainty. The research in concurrent architectures was co-funded by DARPA, as part of that agency's Strategic Computing Program. The research has been in progress since 1985, under DARPA and NASA sponsorship. The research in geometric constraint satisfaction has been done in the context of a particular application, that of determining the 3-D structure of complex protein molecules, using the constraints inferred from NMR measurements.

Feigenbaum, Edward A.↗
NASA NTRS1978

Infrared Astronomical Satellite (IRAS) analysis, appendix C. APART: A first-order deterministic stray radiation analysis program

The APART code (Arizona's Analysis of Radiation Transfer) is a deterministic stray radiation analysis program capable of yielding quantitative descriptions of systems along with insight into the scattering mechanism present. It uses geometrical optics to image primarily rotationally symmetrical systems. The APART code provides a sectional power map of the internal surfaces of a system and identifies critical objects seen from the image. Vane structures are modeled by configuration factors. Once the geometrical configuration factor between the internal objects has been calculated and stored, nonstructural changes to the system can be analyzed without re-running the complete program.

Source record↗
NASA NTRS1959

Flight Behavior of the X-2 Research Airplane to a Mach Number of 3.20 and a Geometric Altitude of 126,200 Feet

The maximum Mach number and altitude capabilities of the Bell X-2 research airplane were achieved during a program conducted by the U.S. Air Force with Bell Aircraft Corp. providing operational support and the National Aeronautics and Space Administration providing instrumentation and advisory engineering assistance. A maximum geometric altitude of 126,200 feet was attained at a static pressure of 9.4 pounds per square foot and a dynamic pressure of 19.1 pounds per square foot. During the last flight of the airplane, a maximum Mach number of 3.20 was reached. The directionally divergent maneuver which terminated the final high Mach number flight was precipitated by the loss in directional stability that resulted from increasing the angle of attack. The yawing moment from the lateral control was sufficient to initiate the divergence and also to cause,, indirectly, rolling moments that were greater than the aileron capabilities of the airplane. The ensuing violent motions-resulting from inertial roll coupling caused the loss of the aircraft.

Day, Richard E.↗
NASA NTRS1991

The effects of Reynolds number, rotor incidence angle and surface roughness on the heat transfer distribution in a large-scale turbine rotor passage

A combined experimental and computational program was conducted to examine the heat transfer distribution in a turbine rotor passage geometrically similar to the Space Shuttle Main Engine (SSME) High Pressure Fuel Turbopump (HPFTP). Heat transfer was measured and computed for both the full span suction and pressure surfaces of the rotor airfoil as well as for the hub endwall surface. The objective of the program was to provide a benchmark-quality database for the assessment of rotor heat transfer computational techniques. The experimental portion of the study was conducted in a large scale, ambient temperature, rotating turbine model. The computational portion consisted of the application of a well-posed parabolized Navier-Stokes analysis of the calculation of the three-dimensional viscous flow through ducts simulating a gas turbine package. The results of this assessment indicate that the procedure has the potential to predict the aerodynamics and the heat transfer in a gas turbine passage and can be used to develop detailed three dimensional turbulence models for the prediction of skin friction and heat transfer in complex three dimensional flow passages.

Blair, M. F.↗
NASA NTRS1989

The effects of Reynolds number, rotor incidence angle, and surface roughness on the heat transfer distribution in a large-scale turbine rotor passage

A combined experimental and computational program was conducted to examine the heat transfer distribution in a turbine rotor passage geometrically similiar to the Space Shuttle Main Engine (SSME) High Pressure Fuel Turbopump (HPFTP). Heat transfer was measured and computed for both the full-span suction and pressure surfaces of the rotor airfoil as well as for the hub endwall surface. The primary objective of the program was to provide a benchmark-quality data base for the assessment of rotor passage heat transfer computational procedures. The experimental portion of the study was conducted in a large-scale, ambient temperature, rotating turbine model. Heat transfer data were obtained using thermocouple and liquid-crystal techniques to measure temperature distributions on the thin, electrically-heated skin of the rotor passage model. Test data were obtained for various combinations of Reynolds number, rotor incidence angle and model surface roughness. The data are reported in the form of contour maps of Stanton number. These heat distribution maps revealed numerous local effects produced by the three-dimensional flows within the rotor passage. Of particular importance were regions of local enhancement produced on the airfoil suction surface by the main-passage and tip-leakage vortices and on the hub endwall by the leading-edge horseshoe vortex system. The computational portion consisted of the application of a well-posed parabolized Navier-Stokes analysis to the calculation of the three-dimensional viscous flow through ducts simulating the a gas turbine passage. These cases include a 90 deg turning duct, a gas turbine cascade simulating a stator passage, and a gas turbine rotor passage including Coriolis forces. The calculated results were evaluated using experimental data of the three-dimensional velocity fields, wall static pressures, and wall heat transfer on the suction surface of the turbine airfoil and on the end wall. Particular attention was paid to an accurate modeling of the passage vortex and to the development of the wall boundary layers including crossflow.

Blair, Michael F.↗
NASA NTRS1988

Structural Analysis Methods Development for Turbine Hot Section Components

This paper summarizes the structural analysis technologies and activities of the NASA Lewis Research Center's gas turbine engine Hot Section Technology (HOST) program. The technologies synergistically developed and validated include: time-varying thermal/mechanical load models; component-specific automated geometric modeling and solution strategy capabilities; advanced inelastic analysis methods; inelastic constitutive models; high-temperature experimental techniques and experiments; and nonlinear structural analysis codes. Features of the program that incorporate the new technologies and their application to hot section component analysis and design are described. Improved and, in some cases, first time three-dimensional nonlinear structural analyses of hot section components of isotropic and anisotropic nickel-base superalloys are presented.

High-temperature↗
NASA NTRS1972

Optimal shield mass distribution for space radiation protection

Computational methods have been developed and successfully used for determining the optimum distribution of space radiation shielding on geometrically complex space vehicles. These methods have been incorporated in computer program SWORD for dose evaluation in complex geometry, and iteratively calculating the optimum distribution for (minimum) shield mass satisfying multiple acute and protected dose constraints associated with each of several body organs.

Billings, M. P.↗
NASA NTRS1971

Estimating the proportions of objects within a single resolution element of a multispectral scanner.

Description of a procedu*e designed to estimate the proportions of objects and materials contained in the instantaneous field of view (IFOV) of an airborne multispectral device. A mathematical model is derived to relate the signature of a combination of materials in a resolution cell to the signatures of the individual materials considered. Estimation algorithms are generated and digital computer programs are prepared to apply the algorithms in the description of the effects which are observed when several objects are viewed simultaneously. The maximum likelihood estimate of the proportions of various individual materials in an IFOV is discussed. A simulation program is proposed for such estimates. A procedure for analyzing the geometric relations of signatures which affect the accuracy of estimates is set forth.

Horwitz, H. M.↗
NASA NTRS1987

Program Generates Views of Complicated Objects

PLAID is three-dimensional Computer Aided Engineering (CAE) program enabling user to construct, manipulate, and display interactively highly complex geometric models. Line drawings and other representations produced by computer-aided design. Used in engineering applications. Incorporation of techniques and features minimizes user's workload in designing and managing PLAID models. Written in FORTRAN 77.

Brown, Jeri W.↗
NASA NTRS1989

Physically-based parameterization of spatially variable soil and vegetation using satellite multispectral data

A stochastic-geometric landsurface reflectance model is formulated and tested for the parameterization of spatially variable vegetation and soil at subpixel scales using satellite multispectral images without ground truth. Landscapes are conceptualized as 3-D Lambertian reflecting surfaces consisting of plant canopies, represented by solid geometric figures, superposed on a flat soil background. A computer simulation program is developed to investigate image characteristics at various spatial aggregations representative of satellite observational scales, or pixels. The evolution of the shape and structure of the red-infrared space, or scattergram, of typical semivegetated scenes is investigated by sequentially introducing model variables into the simulation. The analytical moments of the total pixel reflectance, including the mean, variance, spatial covariance, and cross-spectral covariance, are derived in terms of the moments of the individual fractional cover and reflectance components. The moments are applied to the solution of the inverse problem: The estimation of subpixel landscape properties on a pixel-by-pixel basis, given only one multispectral image and limited assumptions on the structure of the landscape. The landsurface reflectance model and inversion technique are tested using actual aerial radiometric data collected over regularly spaced pecan trees, and using both aerial and LANDSAT Thematic Mapper data obtained over discontinuous, randomly spaced conifer canopies in a natural forested watershed. Different amounts of solar backscattered diffuse radiation are assumed and the sensitivity of the estimated landsurface parameters to those amounts is examined.

Jasinski, Michael F.↗
NASA NTRS2005

Tools for Designing and Analyzing Structures

Structural Design and Analysis Toolset is a collection of approximately 26 Microsoft Excel spreadsheet programs, each of which performs calculations within a different subdiscipline of structural design and analysis. These programs present input and output data in user-friendly, menu-driven formats. Although these programs cannot solve complex cases like those treated by larger finite element codes, these programs do yield quick solutions to numerous common problems more rapidly than the finite element codes, thereby making it possible to quickly perform multiple preliminary analyses - e.g., to establish approximate limits prior to detailed analyses by the larger finite element codes. These programs perform different types of calculations, as follows: 1. determination of geometric properties for a variety of standard structural components; 2. analysis of static, vibrational, and thermal- gradient loads and deflections in certain structures (mostly beams and, in the case of thermal-gradients, mirrors); 3. kinetic energies of fans; 4. detailed analysis of stress and buckling in beams, plates, columns, and a variety of shell structures; and 5. temperature dependent properties of materials, including figures of merit that characterize strength, stiffness, and deformation response to thermal gradients

Luz, Paul L.↗
NASA NTRS1981

Evaluation of SLAR and thematic mapper MSS data for forest cover mapping using computer-aided analysis techniques

Training and test data sets for CAM1S from NS-001 MSS data for two dates (geometrically adjusted to 30 meter resolution) were used to evaluate wavelength band. Two sets of tapes containing digitized HH and HV polarization data were obtained. Because the SAR data on the 9 track tapes contained no meaningful data, the 7 track tapes were copied onto 9 track tapes at LARS. The LARSYS programs were modified and a program was written to reformat the digitized SAR data into a LARSYS format. The radar imagery is being qualitatively interpreted. Results are to be used to identify possible cover types, to produce a classification map to aid in the numerical evaluation classification of radar data, and to develop an interpretation key for radar imagery. The four spatial resolution data sets were analyzed. A program was developed to reduce the spatial distortions resulting from variable viewing distance, and geometrically adjusted data sets were generated. A flowchart of steps taken to geometrically adjust a data set from the NS-001 scanner is presented.

Hoffer, R. M.↗
NASA NTRS1983

The GPRIME approach to finite element modeling

GPRIME, an interactive modeling system, runs on the CDC 6000 computers and the DEC VAX 11/780 minicomputer. This system includes three components: (1) GPRIME, a user friendly geometric language and a processor to translate that language into geometric entities, (2) GGEN, an interactive data generator for 2-D models; and (3) SOLIDGEN, a 3-D solid modeling program. Each component has a computer user interface of an extensive command set. All of these programs make use of a comprehensive B-spline mathematics subroutine library, which can be used for a wide variety of interpolation problems and other geometric calculations. Many other user aids, such as automatic saving of the geometric and finite element data bases and hidden line removal, are available. This interactive finite element modeling capability can produce a complete finite element model, producing an output file of grid and element data.

Wallace, D. R.↗
NASA NTRS1986

Pseudo-prototyping of aerospace mechanical dynamic systems with a generalized computer program

The ADAMS computer program for automated analysis of mechanisms and machines is described. The program automatically formulates mathematical models for prototype or existing mechanisms with the minimum necessary physical and geometric data. The model can then be analyzed in various modes of analysis. The outputs (displacements, velocities, acceleration and forces) can be produced in tabular and graphical (plots, wire frame graphics) form. The application of this computer program to simulating satellite docking maneuvers is illustrated.

Sohoni, Vikram N.↗
NASA NTRS2003

Measurement of Precision Geometric Distances to Three Anchor Points in the Local Universe

As stated in previous reports, our program, funded by a NASA/SARA 3-yr grant, is designed to measure distances directly with accuracies of 5% to three anchor points in the Local Universe. We are attacking this problem on three fronts, using Very Long Baseline Interferometry (VLBI) observations of NGC 4258, M 33, and Sgr A*. We plan to provide distance estimates, with a minimum of systematic uncertainty, that can be used to re- calibrate several "standard candles," such as Cepheid and RR Lyrae variables. This Will place the Galactic and extragalactic distance scales on much firmer ground. The program will provide crucial, independent checks and calibrations of extragalactic distance measurements, and will contribute to the ultimate success and impact of the HST Key Project on Extragalactic Distances and any future NASA astrometric missions. Additionally, since distances are fundamental to astrophysics, our results will affect a large number of general projects on NASA facilities such as the HST, CXO, and JWST.

Reid, Mark J.↗