Search NASA⌕ Search

SEARCH · Search NASA

Results for “geometric programming”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1964

Orbiter heat flux computer program

A two-phased contract is currently underway to develop 1) a set of parametric curves of absorbed heat flux for specific geometries, and 2) a generalized computer program whose output is absorbed heat flux on the surfaces of a planet orbiting spacecraft. The absorbed heat fluxes include the effects of blockage by and reflections from adjacent spacecraft surfaces, assuming all surfaces to be diffuse. The final computer program will calculate fluxes on any of ten arbitrarily positioned plane surfaces, with any surface properties, planetary radiation characteristics, solar intensity, and orbital parameters. Outputs will be heat fluxes versus time, geometrical configuration factors, and radiant flux interchange factors.

COMPUTER PROGRAM↗
NASA NTRS1981

Delineation of soil temperature regimes from HCMM data

Supplementary data including photographs as well as topographic, geologic, and soil maps were obtained and evaluated for ground truth purposes and control point selection. A study area (approximately 450 by 450 pixels) was subset from LANDSAT scene No. 2477-17142. Geometric corrections and scaling were performed. Initial enhancement techniques were initiated to aid control point selection and soils interpretation. The SUBSET program was modified to read HCMM tapes and HCMM data were reformated so that they are compatible with the ORSER system. Initial NMAP products of geometrically corrected and scaled raw data tapes (unregistered) of the study were produced.

Day, R. L.↗
NASA NTRS1981

Structural analysis of cylindrical thrust chambers, volume 3

A system of three computer programs is described for use in conjunction with the BOPAGE finite element program. The programs are demonstrated by analyzing cumulative plastic deformation in a regeneratively cooled rocket thrust chamber. The codes provide the capability to predict geometric and material nonlinear behavior of cyclically loaded structures without performing a cycle-by-cycle analysis over the life of the structure. The program set consists of a BOPACE restart tape reader routine, and extrapolation program and a plot package.

Pearson, M. L.↗
NASA NTRS1976

NASA thermionic-conversion program

The NASA applied research and technology (ART) program for thermionic energy conversion (TEC) is progressing effectively. Current out-of-core emphases allow converter material and design freedoms previously prohibited by in-core nucleonic and geometric restrictions. As a result, potential improvements indicate possibilities for severalfold increases in efficiencies. The new TEC-ART program concentrated initially on low-work-function collectors and interelectrode-loss reduction and revealed much in a short time. For example, arc-drop studies verified the necessity of stable emitters that operate well with little or no adsorbed cesium. This new emission capability coupled with improved collectors that maintain performance with emitter-vapor deposit accumulations are requisites for efficient, enduring thermionic converters. The accomplishments and contributors in these areas are discussed.

Morris, J. F.↗
NASA NTRS2006

Software for Automated Generation of Cartesian Meshes

Cart3D is a collection of computer programs for generating Cartesian meshes [for computational fluid dynamics (CFD) and other applications] in volumes bounded by solid objects. Aspects of Cart3D at earlier stages of development were reported in "Robust and Efficient Generation of Cartesian Meshes for CFD" (ARC-14275), NASA Tech Briefs, Vol. 23, No. 8 (August 1999), page 30. The geometric input to Cart3D comprises surface triangulations like those commonly generated by computer-aided-design programs. Complexly shaped objects can be represented as assemblies of simpler ones. Cart3D deletes all portions of such an assembled object that are not on the exterior surface. Intersections between components are preserved in the resulting triangulation. A tie-breaking routine unambiguously resolves geometric degeneracies. Then taking the intersected surface triangulation as input, the volume mesh is generated through division of cells of an initially coarse hexahedral grid. Cells are subdivided to refine the grid in regions of increased surface curvature and/or increased flow gradients. Cells that become split into multiple unconnected regions by thin pieces of surface are identified.

Aftosmis, Michael J.↗
NASA NTRS1979

Evaluation of SLAR and thematic mapper MSS data for forest cover mapping using computer-aided analysis techniques

The spatial characteristics of the data were evaluated. A program was developed to reduce the spatial distortions resulting from variable viewing distance, and geometrically adjusted data sets were generated. The potential need for some level of radiometric adjustment was evidenced by an along track band of high reflectance across different cover types in the Varian imagery. A multiple regression analysis was employed to explore the viewing angle effect on measured reflectance. Areas in the data set which appeared to have no across track stratification of cover type were identified. A program was developed which computed the average reflectance by column for each channel, over all of the scan lines in the designated areas. A regression analysis was then run using the first, second, and third degree polynomials, for each channel. An atmospheric effect as a component of the viewing angle source of variance is discussed. Cover type maps were completed and training and test field selection was initiated.

Hoffer, R. M.↗
NASA NTRS1988

Structural analysis methods development for turbine hot section components

The structural analysis technologies and activities of the NASA Lewis Research Center's gas turbine engine Hot Section Technology (HOST) Program are summarized. The technologies synergistically developed and validated include: time-varying thermal/mechanical load models; component-specific automated geometric modeling and solution strategy capabilities; advanced inelastic analysis methods; inelastic constitutive models; high-temperature experimental techniques and experiments; and nonlinear structural analysis codes. Features of the program that incorporate the new technologies and their application to hot section component analysis and design are described. Improved and, in some cases, first-time 3-D nonlinear structural analyses of hot section components of isotropic and anisotropic nickel-base superalloys are presented.

Thompson, R. L.↗
NASA NTRS1993

Microcomputer spacecraft thermal analysis routines (MSTAR) Phase I: The user interface

The Microcomputer Spacecraft Thermal Analysis Routines (MSTAR) software package is being developed for NASA/Goddard Space Flight Center by Swales and Associates, Inc. (S&AI). In December 1992, S&AI was awarded a phase I Small Business Inovative Research contract fronm NASA to develop a microcomputer based thermal analysis program to replace the current SSPTA and TRASYS programs. Phase I consists of a six month effort which will focus on developing geometric model generation and visualization capabilities using a graphical user interface (GUI). The information contained in this paper encompasses the work performed during the Phase I development cycle; with emphasis on the development of the graphical user interface (GUI). This includes both the theory behind and specific examples of how the MSTAR GUI was implemented. Furthermore, this report discusses new applications and enhancements which will improve the capabilities and commercialization of the MSTAR program.

Teti, Nicholas M.↗
NASA NTRS1987

Program for Analysis and Enhancement of Images

Land Analysis System (LAS) is collection of image-analysis computer programs designed to manipulate and analyze multispectral image data. Provides user with functions ingesting various sensor data, radiometric and geometric corrections, image registration, training site selection, supervised and unsupervised classification, Fourier domain filtering, and image enhancement. Sufficiently modular and includes extensive library of subroutines to permit inclusion of new algorithmic programs. Commercial package International Mathematical & Statistical Library (IMSL) required for full implementation of LAS. Written in VAX FORTRAN 77, C, and Macro assembler for DEC VAX operating under VMS 4.0.

Lu, Yun-Chi↗
NASA NTRS2003

Introduction to the Abrupt Wing Stall (AWS) Program

The Abrupt Wing Stall (AWS) Program has addressed the problem of uncommanded, transonic lateral motions, such as wing drop, with experimental, computational, and simulation tools. Background to the establishment of the AWS program is given as well as program objectives. In order to understand the fundamental flow mechanisms that caused the undesirable motions for a pre-production version of the F/A-18E, steady and unsteady flow field details were gathered from dedicated transonic wind-tunnel testing and computational studies. The AWS program has also adapted a free-to-roll (FTR) wind-tunnel testing technique traditionally used for low-speed studies of lateral dynamic stability to the transonic flow regime. This FTR capability was demonstrated first in a proof-of -concept study and then applied to an assessment of four different aircraft configurations. Figures of merit for static testing and for FTR testing have been evaluated for two configurations that demonstrated wing drop susceptibility during full-scale flight conditions (the pre-production F/A-18E and the AV-8B at the extremes of its flight envelope) and two configurations that do not exhibit wing drop (the F/A-18C and the F-16C). Design insights have been obtained from aerodynamic computational studies of the four aircraft configurations and from computations quantifying the impact of the various geometric wing differences between the F/A-18C and the F/A-18E wings. Finally, the AWS program provides guidance for assessing, in the simulator, the impact of experimentally determined lateral activity on flight characteristics before going to flight.

Hall, Robert M.↗
NASA NTRS2003

Introduction to the Abrupt Wing Stall (AWS) Program

The Abrupt Wing Stall (AWS) Program has addressed the problem of uncommanded, transonic lateral motions, such as wing drop, with experimental, computational, and simulation tools. Background to the establishment of the AWS program is given as well as program objectives. In order to understand the fundamental flow mechanisms that caused the undesirable motions for a pre-production version of the F/A-18E, steady and unsteady flow field details were gathered from dedicated transonic wind-tunnel testing and computational studies. The AWS program has also adapted a free-to- roll (FTR) wind-tunnel testing technique traditionally used for low-speed studies of lateral dynamic stability to the transonic flow regime. This FTR capability was demonstrated first in a proof-of-concept study and then applied to an assessment of four different aircraft configurations. Figures of merit for static testing and for FTR testing have been evaluated for two configurations that demonstrated wing drop susceptibility during full-scale flight conditions (the pre-production F/A-l8E and the AV-8B at the extremes of its flight envelope) and two configurations that do not exhibit wing drop (the F/A-l8C and the F-l6C). Design insights have been obtained from aerodynamic computational studies of the four aircraft configurations and from computations quantifying the impact of the various geometric wing differences between the F/A-18C and the F/A-l8E wings. Finally, the AWS program provides guidance for assessing, in the simulator, the impact of experimentally determined lateral activity on flight characteristics before going to flight.

Hall, Robert M.↗
NASA NTRS1968

Computer program performs stiffness matrix structural analysis

Computer program generates the stiffness matrix for a particular type of structure from geometrical data, and performs static and normal mode analyses. It requires the structure to be modeled as a stable framework of uniform, weightless members, and joints at which loads are applied and weights are lumped.

Bamford, R.↗
NASA NTRS1972

Thermal effects on the clearance and stiffness of foil journal bearings for a Brayton cycle turboalternator

An analysis of foil journal bearings for a NASA Brayton Cycle Unit (BRU) is presented. The study represents an extension of previous work in that it includes the effects of thermal expansion of foil-bearing components, as well as an improved model of the influence of foil flexure. The results presented give the bearing film thickness, the bearing stiffness, and the foil tension as functions of the operating temperatures and the elasto-hydrodynamic and geometrical parameters pertinent to the design of BRU foil bearings. A computer program for the evaluation of design data and for parametric studies is included.

Eshel, A.↗
NASA NTRS1973

All digital precision processing of ERTS images

The author has identified the following significant results. Experimentation was conducted to evaluate the performance of the Sequential Similarity Detection Algorithm (SSDA) to detect and locate ground central points (GCP) automatically using MSS data. Recent experiments with ERTS data having a temporal separation of from 17 to 72 days between the search area and the GCP have shown that the algorithm can find the GCP's and with an overall probability of 88%. Band 5 appears to give the best results. A modified reseau detection algorithm has been applied to 2 RBV scenes separated by a 12 day period. The algorithm correctly located all 486 reseaus. No false reseaus were located in a companion experiment. Changes in apparent reseau position, due to camera characteristics, were never greater than 3 picture elements in either axis. The positional error of a geometrically corrected image has been predicted by the use of an APL program. The maximum deviation of the GCP's from true UTM coordinate position was computed to be 190 meters. The RMS positional error of all GCP's was 106 meters. Further refinement of the algorithm is expected to reduce the errors.

Bernstein, R.↗
NASA NTRS1974

Modal analysis and control of flexible manipulator arms

The possibility of modeling and controlling flexible manipulator arms was examined. A modal approach was used for obtaining the mathematical model and control techniques. The arm model was represented mathematically by a state space description defined in terms of joint angles and mode amplitudes obtained from truncation on the distributed systems, and included the motion of a two link two joint arm. Three basic techniques were used for controlling the system: pole allocation with gains obtained from the rigid system with interjoint feedbacks, Simon-Mitter algorithm for pole allocation, and sensitivity analysis with respect to parameter variations. An improvement in arm bandwidth was obtained. Optimization of some geometric parameters was undertaken to maximize bandwidth for various payload sizes and programmed tasks. The controlled system is examined under constant gains and using the nonlinear model for simulations following a time varying state trajectory.

Neto, O. M.↗
NASA NTRS1976

Acoustics and aerodynamics of over-the-wing thrust reversers

As part of the Quiet Clean Short-Haul Experimental Engine Program, model tests were conducted to determine the effects of thrust reverser geometric parameters on noise and reverse thrust. The acoustic tests used a 1/6 scale model thrust reverser while the aerodynamic performance tests used a 1/12 scale model reverser. Parameters which were varied in both tests include blocker spacing, blocker height, lip angle, and lip length. The impact of these parameters on peak sideline noise and reverse thrust performance is discussed.

Stimpert, D. L.↗
NASA NTRS1983

Stiffness Properties for Dynamic Modeling of Composite Graphite-Epoxy Cylindrical Orthotropic Shells

Traditional composite lamination theory was used to predict composite graphite-epoxy laminate stiffnesses for comparison to quasi-experimental stiffnesses developed from cylindrical bottle pressure testing. Stiffness sensitivities were examined for variations in constituent materials and geometric properties. The material component interactions examined were the fiber longitudinal and transverse Young's modulus, the fiber shear modulus and primary Poisson's ratio, the resin Young's modulus, shear modulus, and Poisson's ratio. The geometric variation of the helical winding angle was also examined. Two computer programs were written to generate the data used to demonstrate the stiffness variations.

Tolbert, R. N.↗