Search NASA⌕ Search

SEARCH · Search NASA

Results for “gradient calculation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Progress on the reevaluation and validation of the n+233U neutron cross sections

The set of 233 U resonance parameters of the ENDF/B-VIII.0 nuclear data library was adopted from the previous ENDF/B-VII.1 evaluation using the external levels to update the thermal values. Adoption of IAEA 2017 thermal standards ( σ f = 533.0 ± 2.2 b, σ c = 44.9 ± 0.9 b, and ν ‾ tot = 2.487 ± 0.011 ) and of the IAEA-recommended thermal-neutron induced prompt fission neutron spectrum (PFNS) with average PFNS energy of 2.030 ± 0.013 MeV requires a re-evaluation of 233 U neutron cross sections in the resolved resonance region. A newly produced evaluation is being tested on benchmarks carefully selected from the Handbook of International Criticality Safety Benchmark Experiments (ICSBEP) which are highly sensitive to 233 U data. An important goal of this work was to eliminate the strong negative gradient of the calculated effective multiplication factors with respect to the epithermal fission fraction observed in the validation of the ENDF/B-VIII.0 library for those assemblies. A significant improvement in integral performance of critical 233 U solutions is observed for the newly proposed evaluation. Further work addressing the fast neutron region is needed.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2021

A dissolution model of alite coupling surface topography and ions transport under different hydrodynamics conditions at microscale

Portland cement is the most produced material in the world. The hydration process of cement consists of a group of complex chemical reactions. In order to investigate the mechanism of cement hydration, it is vital to study the hydration of each phase separately. An integrated model is proposed in this paper to simulate the dissolution of alite under different hydrodynamic conditions at microscale, coupling Kinetic Monte Carlo model (KMC), Lattice Boltzmann method (LBM) and diffusion boundary layer (DBL). The dissolution of alite is initialised with KMC. Two Multiple-relaxation-time (MRT) LB models are used to simulate the fluid flow and transport of ions, respectively. For solid-liquid interface, DBL is adapted to calculate the concentration gradient and dissolution flux. The model is validated with experiment from literature. The simulation results show good agreements with the results published in the literature.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Local structure study of Fe dopants in Ni-deficit Ni 3 Al alloys

We found that the local electronic and magnetic structure, hyperfine interactions, and phase composition of polycrystalline Ni–deficient Ni 3-x FexAl (x = 0.18 and 0.36) were investigated by means of 57 Fe Mössbauer spectroscopy. The samples were characterized by X–ray diffraction and magnetization measurements. The ab initio calculations performed with the projector augmented wave method and the calculations of the energies of iron point defects were done to elucidate the electronic structure and site preference of Fe doped Ni 3 Al. Moreover, the value of calculated electric field gradient tensor V zz =1.6 10 21 Vm -2 matches well with the results of Mössbauer spectroscopy and indicates that the Fe atoms occupy Ni sites.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Introducing GPU Acceleration into the Python-Based Simulations of Chemistry Framework

We introduce the first version of GPU4P Y SCF, a module that provides GPU acceleration of methods in P Y SCF. As a core functionality, this provides a GPU implementation of two-electron repulsion integrals (ERIs) for contracted basis sets comprising up to g functions using the Rys quadrature. As an illustration of how this can accelerate a quantum chemistry workflow, we describe how to use the ERIs efficiently in the integral-direct Hartree–Fock build and nuclear gradient construction. Benchmark calculations show a significant speedup of 2 orders of magnitude with respect to the multithreaded CPU Hartree–Fock code of P Y SCF and the performance comparable to other open-source GPU-accelerated quantum chemical packages, including GAMESS and QUICK, on a single NVIDIA A100 GPU.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Thermographic Microstructure Monitoring in Electron Beam Additive Manufacturing

To reduce the uncertainty of build performance in metal additive manufacturing, robust process monitoring systems that can detect imperfections and improve repeatability are desired. One of the most promising methods for in-situ monitoring is thermographic imaging. However, there is a challenge in using this technology due to the difference in surface emittance between the metal powder and solidified part being observed that affects the accuracy of the temperature data collected. This developed a method for properly calibrating temperature profiles from thermographic data and then determining important characteristics of the build through additional processing. The thermographic data was analyzed to determine the transition of material from metal powder to a solid as-printed part. A corrected temperature profile was then assembled for each point using calibrations for these surface conditions. Using this data, we calculated the thermal gradient and solid-liquid interface velocity and correlated it to microstructural variation within the part experimentally. This work shows that by using a method of process monitoring, repeatability of a build could be monitored specifically in relation to microstructure control.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Half-metallic antiferromagnetism in double perovskite BiPbCrCuO{sub 6}

The electronic structure and magnetic properties of BiPbCrCuO{sub 6} double perovskite are investigated based on first-principles density functional calculations with generalized gradient approximation (GGA) and GGA incorporated with Coulomb correlation interaction U (GGA + U). The results suggest the half-metallic (HM) and antiferromagnetic (AFM) properties of BiPbCrCuO{sub 6} double perovskite. The HM-AFM property of the double perovskite is caused by the double-exchange mechanism between neighboring Cr{sup 5+}(t{sub 2g}{sup 1}↓) and Cu{sup 2+}(t{sub 2g}{sup 3}↑t{sub 2g}{sup 3}↓e{sub g}{sup 2}↑e{sub g}↓) via the intermediate O{sup 2−}(2s{sup 2}2p{sup 6}) ion.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2015

Electronic structure study of TiB{sub 2} and Ti{sub 2}B

In this paper, the electronic properties of TiB{sub 2} and Ti{sub 2}B are computed within the framework of Density Functional Theory (DFT) based on Linear Combination of Atomic Orbitals (LCAO) method. In the present calculations, the generalized gradient approximation (GGA) proposed by Perdew-Burke-Erenzerhof (PBE) and Becke’s scheme are considered to treat the correlation and exchange effects respectively. TiB{sub 2} crystallizes in the hexagonal AlB{sub 2} type structure which is designated as C32 with the space group P6/mmm. While the crystal structure of Ti{sub 2}B described in this paper is isomorphous to the body centered tetragonal (Al{sub 2}Cu - type) structure with space group I4/mcm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2015

Theoretic base of Edge Local Mode triggering by vertical displacements

Vertical instability is studied with R-dependent displacement. For Solovev's configuration, the stability boundary of the vertical instability is calculated. The pressure gradient is a destabilizing factor which is contrary to Rebhan's result. Equilibrium parallel current density, j{sub //}, at plasma boundary is a drive of the vertical instability similar to Peeling-ballooning modes; however, the vertical instability cannot be stabilized by the magnetic shear which tends towards infinity near the separatrix. The induced current observed in the Edge Local Mode (ELM) triggering experiment by vertical modulation is derived. The theory provides some theoretic explanation for the mitigation of type-I ELMS on ASDEX Upgrade. The principle could be also used for ITER.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2015

Stable half-metallic monolayers of FeCl{sub 2}

The structural, electronic, and magnetic properties of single layers of Iron Dichloride (FeCl{sub 2}) were calculated using first principles calculations. We found that the 1T phase of the single layer FeCl{sub 2} is 0.17 eV/unit cell more favorable than its 1H phase. The structural stability is confirmed by phonon calculations. We found that 1T-FeCl{sub 2} possess three Raman-active (130, 179, and 237 cm{sup −1}) and one infrared-active (279 cm{sup −1}) phonon branches. The electronic band dispersion of the 1T-FeCl{sub 2} is calculated using both gradient approximation of Perdew-Burke-Ernzerhof and DFT-HSE06 functionals. Both functionals reveal that the 1T-FeCl{sub 2} has a half-metallic ground state with a Curie temperature of 17 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2015

System-dependent exchange–correlation functional with exact asymptotic potential and ε{sub HOMO} ≈ − I

Density scaling considerations are used to derive an exchange–correlation explicit density functional that is appropriate for the electron deficient side of the integer and which recovers the exact r → ∞ asymptotic behaviour of the exchange–correlation potential. The functional has an unconventional mathematical form with parameters that are system-dependent; the parameters for an N-electron system are determined in advance from generalised gradient approximation (GGA) calculations on the N- and (N − 1)-electron systems. Compared to GGA results, the functional yields similar exchange–correlation energies, but HOMO energies that are an order of magnitude closer to the negative of the vertical ionisation potential; for anions, the HOMO energies are negative, as required. Rydberg excitation energies are also notably improved and the exchange–correlation potential is visibly lowered towards the near-exact potential. Further development is required to improve valence excitations, static isotropic polarisabilities, and the shape of the potential in non-asymptotic regions. The functional is fundamentally different to conventional approximations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Structural, elastic and vibrational properties of ScGa{sub 3}

We have presented theoretical investigations of the atomic, elastic and lattice dynamical properties of ScGa{sub 3} using an ab-initio pseudopotential method and a linear response scheme, within the generalized gradient approximation. The calculated atomic parameters and elastic constants are in agreement with previous ab initio calculations and experimental measurements. The material shows ductile behavior. Full phonon dispersions for this material are reported.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Confinement of water molecule inside (2, 2) graphyne nanotube

Using density functional theory (DFT) calculations with generalized gradient approximation, the interaction between H{sub 2}O molecule and (2, 2) graphyne nanotube (GNT) has been investigated. The stable configuration due to the insertion of H{sub 2}O molecule inside (2, 2) GNT is determined on the basis of binding energy. The band gap of the GNT decreases due to the confinement of H{sub 2}O molecule. The charge analysis reveals that electrons are shifted from the H{sub 2}O molecule to the GNT. The electronic property of the GNT is highly influenced by the presence of H{sub 2}O molecule; thus, we may design a GNT based sensor for the detection of water molecule.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2016

Cold pulse and rotation reversals with turbulence spreading and residual stress

Transport modeling based on inclusion of turbulence spreading and residual stresses shows internal rotation reversals and polarity reversal of cold pulses, with a clear indication of nonlocal transport effects due to fast spreading in the turbulence intensity field. The effects of turbulence spreading and residual stress are calculated from the gradient of the turbulence intensity. In the model presented in this paper, the flux is carried by the turbulence intensity field, which in itself is subject to radial transport effects. The pulse polarity inversion and the rotation profile reversal positions are close to the radial location of the stable/unstable transition. Both effects have no direct explanation within the framework of classical transport modeling, where the fluxes are related directly to the linear growth rates, the turbulence intensity profile is not considered and the corresponding residual stress is absent. Our simulations are in qualitative agreement with measurements from ohmically heated plasmas. Rotation reversal at a finite radius is found in situations not displaying saturated confinement, which we identify as situations where the plasma is nearly everywhere unstable. As an additional and new effect, the model predicts a perturbation of the velocity profile following a cold pulse from the edge. This allows direct experimental confirmation of both the existence of residual stress caused by turbulence intensity profiles and fundamental ideas of transport modeling presented here.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2017

A multi-channel capacitive probe for electrostatic fluctuation measurement in the Madison Symmetric Torus reversed field pinch

A 40-channel capacitive probe has been developed to measure the electrostatic fluctuations associated with the tearing modes deep into Madison Symmetric Torus (MST) reversed field pinch plasma. The capacitive probe measures the ac component of the plasma potential via the voltage induced on stainless steel electrodes capacitively coupled with the plasma through a thin annular layer of boron nitride (BN) dielectric (also serves as the particle shield). When bombarded by the plasma electrons, BN provides a sufficiently large secondary electron emission for the induced voltage to be very close to the plasma potential. The probe consists of four stalks each with ten cylindrical capacitors that are radially separated by 1.5 cm. The four stalks are arranged on a 1.3 cm square grid so that at each radial position, there are four electrodes forming a square grid. Every two adjacent radial sets of four electrodes form a cube. The fluctuating electric field can be calculated by the gradient of the plasma potential fluctuations at the eight corners of the cube. The probe can be inserted up to 15 cm (r/a = 0.7) into the plasma. Furthermore, the capacitive probe has a frequency bandwidth from 13 Hz to 100 kHz, amplifier-circuit limit, sufficient for studying the tearing modes (5-30 kHz) in the MST reversed-field pinch.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Engineering local strain for single-atom nuclear acoustic resonance in silicon

Mechanical strain plays a key role in the physics and operation of nanoscale semiconductor systems, including quantum dots and single-dopant devices. In this report we describe the design of a nanoelectronic device, where a single nuclear spin is coherently controlled via nuclear acoustic resonance (NAR) through the local application of dynamical strain. The strain drives spin transitions by modulating the nuclear quadrupole interaction. We adopt an AlN piezoelectric actuator compatible with standard silicon metal–oxide–semiconductor processing and optimize the device layout to maximize the NAR drive. We predict NAR Rabi frequencies of order 200 Hz for a single 123Sb nucleus in a wide region of the device. Spin transitions driven directly by electric fields are suppressed in the center of the device, allowing the observation of pure NAR. Using electric field gradient-elastic tensors calculated by the density-functional theory, we extend our predictions to other high-spin group-V donors in silicon and to the isoelectronic 73Ge atom.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Anomalous magnetothermoelectric behavior in massive Dirac materials

Extensive studies of electron transport in Dirac materials have shown positive magnetoresistance (MR) and positive magnetothermopower (MTP) in a magnetic field perpendicular to the excitation current or thermal gradient. In contrast, measurements of electron transport often show a negative longitudinal MR and negative MTP for a magnetic field oriented along the excitation current or thermal gradient; this is attributed to the chiral anomaly in Dirac materials. In this paper, we report a very different magnetothermoelectric transport behavior in the massive Dirac material ZrTe5. Although thin flakes show a commonly observed positive MR in a perpendicular magnetic field, distinct from other Dirac materials, we observe a sharp negative MTP. In a parallel magnetic field, we still observe a negative longitudinal MR, however, a remarkable positive MTP is observed for the fields parallel to the thermal gradients. Our theoretical calculations suggest that this anomalous magnetothermoelectric behavior can be attributed to the screened Coulomb scattering. This work demonstrates the significance of impurity scattering in the electron transport of topological materials and provides deep insight into the magnetotransport phenomena in Dirac materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2017

Nuclear magnetic resonance investigation of the heavy fermion system Ce 2 CoAl 7 Ge 4

We present here nuclear magnetic resonance (NMR) and nuclear quadrupole resonance (NQR) measurements performed on single crystalline ${\mathrm{Ce}}_{2}{\mathrm{CoAl}}_{7}{\mathrm{Ge}}_{4}$, a member of a recently discovered family of heavy fermion materials ${\mathrm{Ce}}_{2}M{\mathrm{Al}}_{7}{\mathrm{Ge}}_{4}$ ($M=\mathrm{Co}$, Ir, Ni, or Pd). Previous measurements indicated a strong Kondo interaction as well as magnetic order below ${T}_{M}=1.8\mathrm{K}$. Our NMR spectral measurements show that the Knight shift $K$ is proportional to the bulk magnetic susceptibility ${\chi}$ at high temperatures. A clear Knight shift anomaly ($K\neg{}{\propto}{\chi}$) is observed at coherence temperatures ${T}^{*}{\sim}17.5\mathrm{K}$ for ${H}_{0}{\parallel}\stackrel{\hat{}{}{}}{c}$ and 10 K for ${H}_{0}{\parallel}\stackrel{\hat{}{}{}}{a}$ at the $^{59}\mathrm{Co}$ site, and ${T}^{*}{\sim}12.5\mathrm{K}$ at the $^{27}\mathrm{Al}$(3) site for ${H}_{0}{\parallel}\stackrel{\hat{}{}{}}{a}$ characteristic of the heavy fermion nature of this compound. At high temperatures, the $^{59}\mathrm{Co}$ NMR spin-lattice relaxation rate ${T}_{1}^{{-}1}$ is dominated by spin fluctuations of the $4f$ local moments with a weak metallic background. The spin fluctuations probed by $^{59}\mathrm{Co}$ NMR are anisotropic and larger in the basal plane than in the $c$ direction. Furthermore, we find ${({T}_{1}TK)}^{{-}1}{\propto}{T}^{{-}1/2}$ at the $^{59}\mathrm{Co}$ site as expected for a Kondo system for $T>{T}^{*}$ and $T>{T}_{K}$. $^{59}\mathrm{Co}$ NQR ${T}_{1}^{{-}1}$ measurements at low temperatures indicate slowing down of spin fluctuations above the magnetic ordering temperature ${T}_{M}{\sim}1.8\mathrm{K}$. A weak ferromagnetic character of fluctuations around $\mathbf{q}=0$ is evidenced by an increase of ${\chi}T$ versus $T$ above the magnetic ordering temperature. We also find good agreement between the observed and calculated electric field gradients at all observed sites.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Understanding the fundamental driver of semiconductor radiation tolerance with experiment and theory

Space is the operating environment of a multitude of systems that our society is heavily reliant on today, however, maintaining operability there necessitates special consideration of the electronic systems' tolerance of space radiation. Electronic systems are critically dependent on the electronic properties of their semiconductor components, which are modified by space radiation with an adverse impact on the space system performance. What innate property allows some semiconductors to sustain little damage while others accumulate defects rapidly with dose is poorly understood, which limits the extent to which radiation tolerance can be implemented as a design criterion. Here, to gain insight into what properties are drivers of semiconductor radiation tolerance, the first step is to generate a dataset of the relative radiation tolerance of a broad sampling of semiconductors. To accomplish this, Rutherford backscatter channeling experiments are used to compare the displaced lattice atom buildup in InAs, InP, GaP, GaN, ZnO, MgO, and Si as a function of stepwise alpha particle dose. With this experimental information on radiation-induced incorporation of interstitial defects in hand, hybrid density functional theory electron densities (and their derived quantities) are calculated and their gradient and Laplacian are evaluated to obtain key fundamental information about the interactions in each material. It is shown that simple, undifferentiated values (which are typically used to describe bond strength) are insufficient to predict radiation tolerance. Instead, the curvature of the electron density at bond critical points provides a measure of radiation tolerance consistent with the experimental results obtained. This curvature and associated forces surrounding bond critical points have the potential to disfavor the localization of displaced lattice atoms at these points, favoring their diffusion toward perfect lattice positions. With this criterion to predict radiation tolerance, simple density functional theory simulations can be conducted on potential new materials to gain insight into how they may operate in demanding high radiation environments.

36 MATERIALS SCIENCE↗