Search NASA⌕ Search

SEARCH · Search NASA

Results for “halo orbit”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Alternative gravity-assist sequences for the ISEE-3 escape trajectory

The International Sun-Earth Explorer-3 (ISEE-3) was moved from its mission halo orbit upstream of the earth's magnetosphere on June 10, 1982. Multiple lunar swingby maneuvers were then used to shape the trajectory for extensive exploration of the distant geomagnetic tail and finally to place the spacecraft on a course that will intercept the comet Giacobini-Zinner on September 11, 1985. With this new mission objective, the spacecraft was renamed the International Cometary Explorer (ICE). A double-lunar-swingby control technique involving five passes by the moon was eventually implemented to accomplish this, but in the process of finding this solution several feasible, though less optimal, alternative trajectory sequences implementing the same procedure were discovered. This paper provides a descriptive comparison of these very different orbital profiles and serves to illustrate the utility and great flexibility of this orbital control procedure. Targeting methodology for finding constrained solutions in this space is also presented.

Muhonen, D.↗

Dynamics During Thrust Maneuvers of Flexible Spinning Satellites with Axial and Radial Booms

The dynamic response to operational maneuvers of spinning symmetric spacecraft with radial and axial booms was analyzed as part of the prelaunch dynamic analysis of the ISEE-3 spacecraft placed in a halo orbit around an Earth-Sun libration point, and later renamed ICE when it was directed to fly-by comet Giacobini-Zinner. The results presented use simple spacecraft models, and frequently give predictions that are good and easily obtained when the results from using a general purpose multibody dynamics program were very time consuming to obtain. Deployment of radial booms, spin-up after partial deployment, stationkeeping, and trajectory changes are analyzed. The latter two can involve both axial thrusting and pulsed radial thrusting once per revolution.

Longman, R. W.↗

SOHO: An observatory to study the solar interior and the solar atmosphere

The Solar and Heliospheric Observatory (SOHO) is described. The two main objectives of SOHO are to improve understanding of solar coronal phenomena and to study solar structure and interior dynamics from its core to the photosphere. The primary goals of the coronal and solar wind studies are to understand the coronal heating mechanism and its expansion into the solar wind. These goals will be achieved both by remote sensing of the solar atmosphere with high resolution spectrometers and telescopes and by in situ measurement of the composition and energy of the resulting solar wind and the energetic particles that propagate through it. The structure and interior dynamics are to be studied by helioseismological methods and the measurement of solar irradiance variations. The SOHO spacecraft will be three-axis stabilized and located in a halo orbit around the L1 Lagrangian point (approximately 1 percent of the distance from the Earth to the Sun). It is currently scheduled for launch in July 1995.

Domingo, V.↗

International Cometary Explorer (ICE)

The primary mission objectives of the International Cometary Explorer (ICE) Comet Mission are to determine the composition and physical state of the Giacobini-Zinner Comet's nucleus; to determine the processes that governs the composition and distribution of neutral and ionized species in the cometary atmosphere; and to investigate the interaction between the solar wind and the cometary atmosphere. The spacecraft was in a halo orbit around the Sun-Earth libration point until it was moved 10 Jun. 1982 to the Earth's Geomagnetic Tail (GT). The spacecraft reached the GT in Jan. 1983 and remained there until Dec. 1983, at which time a lunar swing-by placed the spacecraft in a trajectory heliocentric orbit which encountered the comet Giacobini-Zinner in Sep. 1985. The spacecraft provided observations of solar wind upstream of Halley's Comet in 1986. Information is presented in tabular form and includes the following areas: Deep Space Network support, frequency assignments, telemetry, command, and tracking support responsibilities.

Wales, R.↗

SOHO - An observatory to study the solar interior and the solar atmosphere

The Solar and Heliospheric Observatory (SOHO) is described. The two main objectives of SOHO are to improve understanding of solar coronal phenomena and to study solar structure and interior dynamics from its core to the photosphere. The primary goals of the coronal and solar wind studies are to understand the coronal heating mechanism and its expansion into the solar wind. These goals will be achieved both by remote sensing of the solar atmosphere with high resolution spectrometers and telescopes and by in situ measurement of the composition and energy of the resulting solar wind and the energetic particles that propagate through it. The structure and interior dynamics are to be studied by helioseismological methods and the measurement of solar irradiance variations. The SOHO spacecraft will be three-axis stabilized and located in a halo orbit around the L1 Lagrangian point (approximately 1 percent of the distance from the Earth to the Sun). It is currently scheduled for launch in July 1995.

Poland, A. I.↗

Three high duty cycle, space-qualified mechanisms

The Michelson Doppler Imager (MDI) is a scientific instrument aboard the Solar and Heliospheric Observatory (SOHO) spacecraft. In 1995, the spacecraft will be put into a halo orbit about the L1 Lagrangian point (equal Sun and Earth gravity). The MDI looks at the sun continuously and takes a picture with a large format CCD camera every 3 seconds. The design goal of the mission is 6 years, so over 60 million pictures will be taken. The sun, being a high intensity source, provides a signal with a single pixel noise level of 0.2 percent. Many images are combined to measure the oscillatory motion of the sun so very high performance is required of the mechanisms in order that they not add noise to the data. The MDI instrument is made up of two parts, the electronics package and the optics package. This paper describes the design and testing of three mechanisms on the MDI which are required to operate large numbers of times.

Akin, David↗

Atlas IIAS ascent trajectory design for the SOHO mission

In 1995, an Atlas IIAS launch vehicle will loft the Solar and Heliospheric Observatory (SOHO) as part of the International Solar and Terrestrial Physics program. The operational phase of the SOHO mission will be conducted from a `halo orbit' about the Sun-Earth interior libration point. Depending on the time of the year of launch, the optimal transfer requires a parking orbit of variable duration to satisfy widely varying inertial targets. A simulation capability has been developed that optimizes the launch vehicle ascent and spacecraft transfer phases of flight together, subject to both launch vehicle and spacecraft constraints. It will be shown that this `ground-up' simulation removes the need for an intermediate target vector at Centaur upper stage/spacecraft separation. Although providing only a modest gain in deliverable satellite mass, this capability substantially improves the mission integration process by removing the strict reliance on near-Earth target vectors. Trajectory data from several cases are presented and future applications of this capability are also discussed.

Willen, Robert E.↗

Multi-Spacecraft Observations of Interplanetary Shocks

Using multi-spacecraft observations primarily from ACE and WIND, and from IMP 8 and Geotail when available, the 3-dimensional structure of interplanetary shocks on the hundred Earth radii scale will be discussed. The complete magnetic field, and solar wind ion and electron data sets were used to fit the shocks with a full non-linear least squares fit "Rankine-Hugoniot" technique yielding the local shock surface normals and speeds with associated uncertainties. Multi-spacecraft results reveal that on the distance scale of ACE's L1 halo orbit the shocks deviate significantly from a simple planar geometry. This result has important consequences for the prediction of the exact arrival times of interplanetary shocks at the Earth's magnetosphere, and hence, on the reliability of space weather predictions. It also has implications on the coherence scale of solar wind structures and their evolution from the Sun to Earth.

Szabo, A.↗

Entry Dispersion Analysis for the Genesis Sample Return Capsule

Genesis will be the first mission to return samples from beyond the Earth-Moon system. The spacecraft will be inserted into a halo orbit about the L1 (Sun- Earth) libration point where it will remain for two years collecting solar wind particles. Upon Earth return, the sample return capsule, which is passively controlled, will descend under parachute to Utah. The present study describes the analysis of the entry, descent, and landing scenario of the returning sample capsule. The robustness of the entry sequence is assessed through a Monte Carlo dispersion analysis where the impact of off-nominal conditions is ascertained. The dispersion results indicate that the capsule attitude excursions near peak heating and drogue chute deployment are within Genesis mission limits. Additionally, the size of the resulting 3-sigma landing ellipse is 47.8 km in downrange by 15.2 km in crossrange, which is within the Utah Test and Training Range boundaries.

Desai, Prasun N.↗

Entry Dispersion Analysis for the Genesis Sample Return Capsule

Genesis will be the first mission to return samples from beyond the Earth-Moon system. The spacecraft will be inserted into a halo orbit about the L1 (Sun- Earth) libration point where it will remain for two years collecting solar wind particles. Upon Earth return, the sample return capsule, which is passively controlled, will descend under parachute to Utah. The present study describes the analysis of the entry, descent, and landing scenario of the returning sample cap- sule. The robustness of the entry sequence is assessed through a Monte Carlo dispersion analysis where the impact of off-nominal conditions is ascertained. The dispersion results indicate that the capsule attitude excursions near peak heating and drogue chute deployment are within Genesis mission limits. Additionally, the size of the resulting 3-sigma landing ellipse is 47.8 km in downrange by 15.2 km in crossrange, which is within the Utah Test and Training Range boundaries.

Desai, Prasun, N.↗

Multi-Spacecraft Observations of Interplanetary Shocks

Using multi-spacecraft observations primarily from ACE and WIND and from IMP 8 and Geotail when available, the 3-dimensional structure of interplanetary shocks on the hundred Earth radii scale will be discussed. The complete magnetic field, and solar wind ion and electron data sets were used to fit the shocks with a full non-linear least squares fitting "Rankine-Hugoniot" technique yielding the local shock surface normals and speeds with associated uncertainties. Multi-spacecraft results reveal that on the distance scale of ACE's L1 halo orbit the shocks deviate from a simple planar geometry. This result has important consequences for the prediction of the exact arrival times of interplanetary shocks at the Earth's magnetosphere, and hence, on the reliability of space weather predictions. It also has implications on the coherence scale of solar wind structures and their evolution from the Sun to Earth.

Smith, C. W.↗

Charged Particle Environment Definition for NGST: Model Development

NGST will operate in a halo orbit about the L2 point, 1.5 million km from the Earth, where the spacecraft will periodically travel through the magnetotail region. There are a number of tools available to calculate the high energy, ionizing radiation particle environment from galactic cosmic rays and from solar disturbances. However, space environment tools are not generally available to provide assessments of charged particle environment and its variations in the solar wind, magnetosheath, and magnetotail at L2 distances. An engineering-level phenomenology code (LRAD) was therefore developed to facilitate the definition of charged particle environments in the vicinity of the L2 point in support of the NGST program. LRAD contains models tied to satellite measurement data of the solar wind and magnetotail regions. The model provides particle flux and fluence calculations necessary to predict spacecraft charging conditions and the degradation of materials used in the construction of NGST. This paper describes the LRAD environment models for the deep magnetotail (XGSE < -100 Re) and solar wind, and presents predictions of the charged particle environment for NGST.

Blackwell, William C.↗

Charged Particle Environment Definition for NGST: L2 Plasma Environment Statistics

The plasma environment encountered by the Next Generation Space Telescope satellite in a halo orbit about L2 can include the Earth's magnetotail and magnetosheath in addition to the solar wind depending on the orbital radius chosen for the mission. Analysis of plasma environment impacts on the satellite requires knowledge of the average and extreme plasma characteristics to assess the magnitude of spacecraft charging and materials degradation expected for the mission lifetime. This report describes the analysis of plasma data from instruments onboard the IMP 8 and Geotail spacecraft used to produce the plasma database for the LRAD engineering-level phenomenology code developed to provide the NGST L2 environment definition.

Minow, Joseph I.↗

Genesis Trajectory Design

The Genesis mission will launch in 2001, sending the spacecraft into a halo orbit about the Sun-Earth L1 point to collect and return solar wind samples to the Earth for analysis in 2003. One of the most constraining aspects of the mission design is the requirement to return to the designated landing site (the Utah Test and Training Range, UTTR) during daylight hours. The ongoing mission design has led the development of a family of solutions that characterize a broad range of conditions at Earth entry. Characterizing this family provides insight into the possible existence of additional trajectories while also helping to narrow the search space by indicating where additional solutions are unlikely to exist; this contributes to a more efficient utilization of mission design resources.

Bell, Julia L.↗

A Non-Linear Approach to Spacecraft Formation Control in the Vicinity of a Collinear Libration Point

An expanding interest in mission design strategies that exploit libration point regions, demands the continued development of enhanced, efficient, control algorithms for station-keeping and formation maintenance. Linear control strategies have been developed for station-keeping. However, their region of stability is bounded by the assumptions required for linearizing the governing equations of motion. For example, reference [I] discusses the development of a linear control design for maintaining a halo orbit about the Earth-Moon L2 libration point. Trial runs indicated the trajectory was unstable for starting points exceeding 45,000 km from the L2 point. Also, there was significant growth in the control effort required to maintain the orbit as the nominal radius increased. This result is a consequence of the increased influence of the system non-linearities, as the trajectory deviated from the linearization point, L2. As an alternative, this paper presents the development of a non-linear control strategy, based on a Hamiltonian formulation of the equations of motion. The control strategy is applied to the problem of formation maintenance, rather than simple station

Luquette, Richard J.↗

Triana Safehold: A New Gyroless, Sun-Pointing Attitude Controller

Triana is a single-string spacecraft to be placed in a halo orbit about the sun-earth Ll Lagrangian point. The Attitude Control Subsystem (ACS) hardware includes four reaction wheels, ten thrusters, six coarse sun sensors, a star tracker, and a three-axis Inertial Measuring Unit (IMU). The ACS Safehold design features a gyroless sun-pointing control scheme using only sun sensors and wheels. With this minimum hardware approach, Safehold increases mission reliability in the event of a gyroscope anomaly. In place of the gyroscope rate measurements, Triana Safehold uses wheel tachometers to help provide a scaled estimation of the spacecraft body rate about the sun vector. Since Triana nominally performs momentum management every three months, its accumulated system momentum can reach a significant fraction of the wheel capacity. It is therefore a requirement for Safehold to maintain a sun-pointing attitude even when the spacecraft system momentum is reasonably large. The tachometer sun-line rate estimation enables the controller to bring the spacecraft close to its desired sun-pointing attitude even with reasonably high system momentum and wheel drags. This paper presents the design rationale behind this gyroless controller, stability analysis, and some time-domain simulation results showing performances with various initial conditions. Finally, suggestions for future improvements are briefly discussed.

Chen, J.↗

Entry Dispersion Analysis for the Genesis Sample Return Capsule

Genesis will be the first mission to return samples from beyond the Earth-Moon system. The spacecraft will be inserted into a halo orbit about the L1 (Sun-Earth) libration point where it will remain for two years collecting solar wind particles. Upon Earth return, the sample return capsule, which is passively controlled, will descend under parachute to Utah. The present study describes the analysis of the entry, descent, and landing scenario of the returning sample capsule. The robustness of the entry sequence is assessed through a Monte Carlo dispersion analysis where the impact of off-nominal conditions is ascertained. The dispersion results indicate that the capsule attitude excursions near peak heating and drogue chute deployment are within Genesis mission limits. Additionally, the size of the resulting 3-sigma landing ellipse is 47.8 km in downrange by 15.2 km in crossrange, which is within the Utah Test and Training Range boundaries.

Desai, Prasun N.↗

Effects of Vacuum Ultraviolet Radiation on Thin Polyimide Films Evaluated

NASA anticipates launching the Next Generation Space Telescope (NGST) mission-- whose purpose is to examine the origins of our universe by making measurements in the infrared portion of the spectrum--in 2009. So that the telescope can operate at very low temperatures (less than 100 K), a halo orbit about the second Lagrangian point (L2) is being considered because it is far from Earth and its reflected sunlight. The Sun-Earth L2 point is located 1.53 10(exp 6) km from the Earth in the direction away from the Sun. This mission presents new challenges in many areas of technology, including the development of a multilayer insulation sunshield for the telescope. This sunshield is required to be large (proposed dimensions of approximately 33 by 14 m), storable, deployable, and lightweight. In addition, its polymer film layers must be seamable, foldable, and resistant to tearing and creep, with low outgassing. The sunshield must maintain its structural integrity and its Sun-facing side must maintain a low solar absorptance to thermal emittance ratio (alpha/epsilon) over the planned 10-yr mission duration including over 80,000 hr facing constant sunlight.

Dever, Joyce A.↗