SEARCH · Search NASA

Results for “heuristic algorithm”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

All sources NASA NTRS DOE OSTI

NASA NTRS1990

Using a multifrontal sparse solver in a high performance, finite element code

We consider the performance of the finite element method on a vector supercomputer. The computationally intensive parts of the finite element method are typically the individual element forms and the solution of the global stiffness matrix both of which are vectorized in high performance codes. To further increase throughput, new algorithms are needed. We compare a multifrontal sparse solver to a traditional skyline solver in a finite element code on a vector supercomputer. The multifrontal solver uses the Multiple-Minimum Degree reordering heuristic to reduce the number of operations required to factor a sparse matrix and full matrix computational kernels (e.g., BLAS3) to enhance vector performance. The net result in an order-of-magnitude reduction in run time for a finite element application on one processor of a Cray X-MP.

King, Scott D.↗

NASA NTRS2017

Heuristic Area Cost Estimation for Observational Coverage Schedulers

This paper presents a comparison of heuris- tics used to estimate the amount of time it would take for a spacecraft to image an area using Boustrophedon decomposition (Choset and Pignon 1998). Machine learning tech- niques are used to characterize algorithmic performance of coverage algorithms. It is shown that an ordinary least-squares linear model is among the most accurate in a set of constant and linear order regression models both in terms of memory consumption and schedule duration. These are demonstrated using the ASPEN planning system (Fukunaga et al. 1997) on the Eagle Eye domain.

Knight, Russell↗

NASA NTRS1992

External calibration of polarimetric radar images using distributed targets

A new technique is presented for calibrating polarimetric synthetic aperture radar (SAR) images using only the responses from natural distributed targets. The model for polarimetric radars is assumed to be X = cRST where X is the measured scattering matrix corresponding to the target scattering matrix S distorted by the system matrices T and R (in general T does not equal R(sup t)). To allow for the polarimetric calibration using only distributed targets and corner reflectors, van Zyl assumed a reciprocal polarimetric radar model with T = R(sup t); when applied for JPL SAR data, a heuristic symmetrization procedure is used by POLCAL to compensate the phase difference between the measured HV and VH responses and then take the average of both. This heuristic approach causes some non-removable cross-polarization responses for corner reflectors, which can be avoided by a rigorous symmetrization method based on reciprocity. After the radar is made reciprocal, a new algorithm based on the responses from distributed targets with reflection symmetry is developed to estimate the cross-talk parameters. The new algorithm never experiences problems in convergence and is also found to converge faster than the existing routines implemented for POLCAL. When the new technique is implemented for the JPL polarimetric data, symmetrization and cross-talk removal are performed on a line-by-line (azimuth) basis. After the cross-talks are removed from the entire image, phase and amplitude calibrations are carried out by selecting distributed targets either with azimuthal symmetry along the looking direction or with some well-known volume and surface scattering mechanisms to estimate the relative phases and amplitude responses of the horizontal and vertical channels.

Yueh, Simon H.↗

NASA NTRS2003

Fuzzy Logic Trajectory Design and Guidance for Terminal Area Energy Management

The second generation reusable launch vehicle will leverage many new technologies to make flight to low earth orbit safer and more cost effective. One important capability will be completely autonomous flight during reentry and landing, thus making it unnecessary to man the vehicle for cargo missions with stringent weight constraints. Implementation of sophisticated new guidance and control methods will enable the vehicle to return to earth under less than favorable conditions. The return to earth consists of three phases--Entry, Terminal Area Energy Management (TAEM), and Approach and Landing. The Space Shuttle is programmed to fly all three phases of flight automatically, and under normal circumstances the astronaut-pilot takes manual control only during the Approach and Landing phase. The automatic control algorithms used in the Shuttle for TAEM and Approach and Landing have been developed over the past 30 years. They are computationally efficient, and based on careful study of the spacecraft's flight dynamics, and heuristic reasoning. The gliding return trajectory is planned prior to the mission, and only minor adjustments are made during flight for perturbations in the vehicle energy state. With the advent of the X-33 and X-34 technology demonstration vehicles, several authors investigated implementing advanced control methods to provide autonomous real-time design of gliding return trajectories thus enhancing the ability of the vehicle to adjust to unusual energy states. The bulk of work published to date deals primarily with the approach and landing phase of flight where changes in heading angle are small, and range to the runway is monotonically decreasing. These benign flight conditions allow for model simplification and fairly straightforward optimization. This project focuses on the TAEM phase of flight where mathematically precise methods have produced limited results. Fuzzy Logic methods are used to make onboard autonomous gliding return trajectory design robust to a wider energy envelope, and the possibility of control surface failures, thus increasing the flexibility of unmanned gliding recovery and landing.

Burchett, Bradley↗

NASA NTRS2019

Exploring Network-Related Optimization Problems Using Quantum Heuristics

Network-related connectivity optimization problems are underlying a wide range of applications and are also of high computational complexity. We consider studying network optimization problems using two types of quantum heuristics.One is quantum annealing, and the other Quantum Alternating Operator Ansatz, an extension of the Quantum Approximate Optimization Algorithms for gate-model quantum computation, in which a cost-function based unitary and a non-commuting mixing unitary are applied alternately. We present problem mappings for problems of finding the spanning-tree or spanning-graph of a graph that optimizes certain costs, and a variant that further requires the spanning-tree be degree-bounded. With quantum annealing, all constraints are cast into penalty terms in the cost Hamiltonian, and the solution is encoded as the ground state of the Hamiltonian. We provide three mappings to the quadratic unconstrained binary optimization (QUBO) form, compare the resource requirements, and analyze the tradeoffs. For QAOA, we give special focus on the design of mixers based on the constraints presented in the problem, such that the system evolution remains in a subspace of the full Hilbert space where all constraints are satisfied. In the spanning-tree problem, one such hard constraint is that a mixer applied to a spanning-tree needs also be a spanning tree. This involves checking the connectivity of a subgraph, which is a global condition common for most network-related problems. We show how this feature can be efficiently represented in the mixer in a quantum coherent way, based on manipulation of a descendant-matrix and an adjacent matrix. We further develop a mixer for the spanning-graphs based on the spanning-tree mixer.

Wang, Zhihui↗

NASA NTRS1987

Automated problem scheduling and reduction of synchronization delay effects

It is anticipated that in order to make effective use of many future high performance architectures, programs will have to exhibit at least a medium grained parallelism. A framework is presented for partitioning very sparse triangular systems of linear equations that is designed to produce favorable preformance results in a wide variety of parallel architectures. Efficient methods for solving these systems are of interest because: (1) they provide a useful model problem for use in exploring heuristics for the aggregation, mapping and scheduling of relatively fine grained computations whose data dependencies are specified by directed acrylic graphs, and (2) because such efficient methods can find direct application in the development of parallel algorithms for scientific computation. Simple expressions are derived that describe how to schedule computational work with varying degrees of granularity. The Encore Multimax was used as a hardware simulator to investigate the performance effects of using the partitioning techniques presented in shared memory architectures with varying relative synchronization costs.

Saltz, Joel H.↗

NASA NTRS1999

Robust pupil center detection using a curvature algorithm

Determining the pupil center is fundamental for calculating eye orientation in video-based systems. Existing techniques are error prone and not robust because eyelids, eyelashes, corneal reflections or shadows in many instances occlude the pupil. We have developed a new algorithm which utilizes curvature characteristics of the pupil boundary to eliminate these artifacts. Pupil center is computed based solely on points related to the pupil boundary. For each boundary point, a curvature value is computed. Occlusion of the boundary induces characteristic peaks in the curvature function. Curvature values for normal pupil sizes were determined and a threshold was found which together with heuristics discriminated normal from abnormal curvature. Remaining boundary points were fit with an ellipse using a least squares error criterion. The center of the ellipse is an estimate of the pupil center. This technique is robust and accurately estimates pupil center with less than 40% of the pupil boundary points visible.

Non-NASA Center↗

NASA NTRS1992

Functional expansion representations of artificial neural networks

In the past few years, significant interest has developed in using artificial neural networks to model and control nonlinear dynamical systems. While there exists many proposed schemes for accomplishing this and a wealth of supporting empirical results, most approaches to date tend to be ad hoc in nature and rely mainly on heuristic justifications. The purpose of this project was to further develop some analytical tools for representing nonlinear discrete-time input-output systems, which when applied to neural networks would give insight on architecture selection, pruning strategies, and learning algorithms. A long term goal is to determine in what sense, if any, a neural network can be used as a universal approximator for nonliner input-output maps with memory (i.e., realized by a dynamical system). This property is well known for the case of static or memoryless input-output maps. The general architecture under consideration in this project was a single-input, single-output recurrent feedforward network.

Gray, W. Steven↗

NASA NTRS2021

Optimal Experimental Design With Fast Neural Network Surrogate Models

Designing optimal experiments minimizes the uncertainty of results and maximizes the efficient use of resources. Herein, machine learning surrogate models and the approximate coordinate exchange (ACE) algorithm are used to determine optimum experimental designs over large or arbitrarily restrictive design spaces. Optimal experimental design is particularly salient in materials science where experiments are expensive and material properties must often be inferred indirectly. The proposed framework is demonstrated by finding optimal experiments with which the hidden constituent properties of composite materials can be most efficiently inferred from observable experimental outcomes. The optimum experimental design is given by an information-theoretic criteria, which maximizes the conditional mutual information between the hidden properties and the expected experimental outcomes. To perform tractable optimization a neural network is trained as a surrogate model to mimic a physics based simulation, which can calculate the expected experimental outcome based on a candidate experimental design and sampled constituent properties. The ACE algorithm is used to optimize over large design spaces with many tests and controlled parameters where an exhaustive search would be intractable even with the surrogate model. Using this approach, optimal experimental designs that are consistent with those produced by heuristic knowledge and established best practices are found; then optimal designs in larger design spaces where heuristic knowledge is unavailable are examined.

machine learning↗

NASA NTRS2003

Iterative pass optimization of sequence data

The problem of determining the minimum-cost hypothetical ancestral sequences for a given cladogram is known to be NP-complete. This "tree alignment" problem has motivated the considerable effort placed in multiple sequence alignment procedures. Wheeler in 1996 proposed a heuristic method, direct optimization, to calculate cladogram costs without the intervention of multiple sequence alignment. This method, though more efficient in time and more effective in cladogram length than many alignment-based procedures, greedily optimizes nodes based on descendent information only. In their proposal of an exact multiple alignment solution, Sankoff et al. in 1976 described a heuristic procedure--the iterative improvement method--to create alignments at internal nodes by solving a series of median problems. The combination of a three-sequence direct optimization with iterative improvement and a branch-length-based cladogram cost procedure, provides an algorithm that frequently results in superior (i.e., lower) cladogram costs. This iterative pass optimization is both computation and memory intensive, but economies can be made to reduce this burden. An example in arthropod systematics is discussed. c2003 The Willi Hennig Society. Published by Elsevier Science (USA). All rights reserved.

NASA Discipline Evolutionary Biology↗

NASA NTRS1976

Scheduling algorithm for mission planning and logistics evaluation users' guide

The scheduling algorithm for mission planning and logistics evaluation (SAMPLE) program is a mission planning tool composed of three subsystems; the mission payloads subsystem (MPLS), which generates a list of feasible combinations from a payload model for a given calendar year; GREEDY, which is a heuristic model used to find the best traffic model; and the operations simulation and resources scheduling subsystem (OSARS), which determines traffic model feasibility for available resources. The SAMPLE provides the user with options to allow the execution of MPLS, GREEDY, GREEDY-OSARS, or MPLS-GREEDY-OSARS.

Chang, H.↗

NASA NTRS1994

Determining the accuracy of maximum likelihood parameter estimates with colored residuals

An important part of building high fidelity mathematical models based on measured data is calculating the accuracy associated with statistical estimates of the model parameters. Indeed, without some idea of the accuracy of parameter estimates, the estimates themselves have limited value. In this work, an expression based on theoretical analysis was developed to properly compute parameter accuracy measures for maximum likelihood estimates with colored residuals. This result is important because experience from the analysis of measured data reveals that the residuals from maximum likelihood estimation are almost always colored. The calculations involved can be appended to conventional maximum likelihood estimation algorithms. Simulated data runs were used to show that the parameter accuracy measures computed with this technique accurately reflect the quality of the parameter estimates from maximum likelihood estimation without the need for analysis of the output residuals in the frequency domain or heuristically determined multiplication factors. The result is general, although the application studied here is maximum likelihood estimation of aerodynamic model parameters from flight test data.

Morelli, Eugene A.↗

NASA NTRS1988

Development and demonstration of an on-board mission planner for helicopters

Mission management tasks can be distributed within a planning hierarchy, where each level of the hierarchy addresses a scope of action, and associated time scale or planning horizon, and requirements for plan generation response time. The current work is focused on the far-field planning subproblem, with a scope and planning horizon encompassing the entire mission and with a response time required to be about two minutes. The far-feld planning problem is posed as a constrained optimization problem and algorithms and structural organizations are proposed for the solution. Algorithms are implemented in a developmental environment, and performance is assessed with respect to optimality and feasibility for the intended application and in comparison with alternative algorithms. This is done for the three major components of far-field planning: goal planning, waypoint path planning, and timeline management. It appears feasible to meet performance requirements on a 10 Mips flyable processor (dedicated to far-field planning) using a heuristically-guided simulated annealing technique for the goal planner, a modified A* search for the waypoint path planner, and a speed scheduling technique developed for this project.

Deutsch, Owen L.↗

NASA NTRS1989

A real-time expert system for self-repairing flight control

An integrated environment for specifying, prototyping, and implementing a self-repairing flight-control (SRFC) strategy is described. At an interactive workstation, the user can select paradigms such as rule-based expert systems, state-transition diagrams, and signal-flow graphs and hierarchically nest them, assign timing and priority attributes, establish blackboard-type communication, and specify concurrent execution on single or multiple processors. High-fidelity nonlinear simulations of aircraft and SRFC systems can be performed off-line, with the possibility of changing SRFC rules, inference strategies, and other heuristics to correct for control deficiencies. Finally, the off-line-generated SRFC can be transformed into highly optimized application-specific real-time C-language code. An application of this environment to the design of aircraft fault detection, isolation, and accommodation algorithms is presented in detail.

Gaither, S. A.↗

NASA NTRS1994

Integrating Design and Manufacturing for a High Speed Civil Transport Wing

The aerospace industry is currently addressing the problem of integrating design and manufacturing. Because of the difficulties associated with using conventional, procedural techniques and algorithms, it is the authors' belief that the only feasible way to integrate the two concepts is with the development of an appropriate Knowledge-Based System (KBS). The authors propose a methodology for an aircraft producibility assessment, including a KBS, that addresses both procedural and heuristic aspects of integrating design and manufacturing of a High Speed Civil Transport (HSCT) wing. The HSCT was chosen as the focus of this investigation since it is a current NASA/aerospace industry initiative full of technological challenges involving many disciplines. The paper gives a brief background of selected previous supersonic transport studies followed by descriptions of key relevant design and manufacturing methodologies. Georgia Tech's Concurrent Engineering/Integrated Product and Process Development methodology is discussed with reference to this proposed conceptual producibility assessment. Evaluation criteria are presented that relate pertinent product and process parameters to overall product producibility. In addition, the authors' integration methodology and reasons for selecting a KBS to integrate design and manufacturing are presented in this paper. Finally, a proposed KBS is given, as well as statements of future work and overall investigation objectives.

Marx, William J.↗

NASA NTRS2007

Formation Design Strategy for SCOPE High-Elliptic Formation Flying Mission

The new formation design strategy using simulated annealing (SA) optimization is presented. The SA algorithm is useful to survey a whole solution space of optimum formation, taking into account realistic constraints composed of continuous and discrete functions. It is revealed that this method is not only applicable for circular orbit, but also for high-elliptic orbit formation flying. The developed algorithm is first tested with a simple cart-wheel motion example, and then applied to the formation design for SCOPE. SCOPE is the next generation geomagnetotail observation mission planned in JAXA, utilizing a formation flying techonology in a high elliptic orbit. A distinctive and useful heuristics is found by investigating SA results, showing the effectiveness of the proposed design process.

Tsuda, Yuichi↗

NASA NTRS2006

Active Learning with Irrelevant Examples

Active learning algorithms attempt to accelerate the learning process by requesting labels for the most informative items first. In real-world problems, however, there may exist unlabeled items that are irrelevant to the user's classification goals. Queries about these points slow down learning because they provide no information about the problem of interest. We have observed that when irrelevant items are present, active learning can perform worse than random selection, requiring more time (queries) to achieve the same level of accuracy. Therefore, we propose a novel approach, Relevance Bias, in which the active learner combines its default selection heuristic with the output of a simultaneously trained relevance classifier to favor items that are likely to be both informative and relevant. In our experiments on a real-world problem and two benchmark datasets, the Relevance Bias approach significantly improved the learning rate of three different active learning approaches.

machine learning↗

NASA NTRSDate not supplied

Planning Satellite Swarm Measurements for Climate Models: Comparing Dynamic Constraint Processing and MILP Methods

We present D-SHIELD, a challenging climate science application to plan coordinated measurements (observations) for a constellation of satellites, each containing two different sensors, each with 61 pointing angle options. The L-band and P-band radar sensors collect data fed into a soil moisture model which tracks and predicts soil moisture across 1.67 million Ground Positions (GP). Soil moisture is an important predictor of wildfires, and then a predictor of floods, landslides and debris flow after a fire. Each measurement covers multiple GP due to the sensor footprint. Each GP has a "model error" which represents the uncertainty of the the soil moisture state prediction. Model error changes at different rates for each GP as the time since last observation increases and after significant events like rain. The planner's goal is to select measurements which maximize soil moisture model improvement (reduce model uncertainty). This problem is combinatorically explosive, involving many degrees of freedom for planner choices. Good domain heuristics can find solutions within a reasonable time for our application needs but cannot be proven optimal. In this paper we compare two different planning approaches to this problem: Dynamic Constraint Processing (DCP) and Mixed Integer Linear Programming (MILP). We match inputs and metrics for both DCP and MILP algorithms to enable a direct apples-to-apples comparison. We demonstrate and discuss the trades between DCP flexibility and performance vs. MILP's promise of provable optimality.

Rich Levinson↗