Search NASA⌕ Search

SEARCH · Search NASA

Results for “hydration shell”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Liquid-liquid phase separation in aerosol particles: Imaging at the Nanometer Scale

Atmospheric aerosols can undergo phase transitions including liquid-liquid phase separation (LLPS) while responding to changes in the ambient relative humidity (RH). Here, we report results of chemical imaging experiments using environmental scanning electron microscopy (ESEM) and scanning transmission x-ray microscopy (STXM) to investigate the LLPS of micron sized particles undergoing a full hydration-dehydration cycle. Internally mixed particles composed of ammonium sulfate (AS) and either: limonene secondary organic carbon (LSOC), a, 4-dihydroxy-3-methoxybenzeneaceticacid (HMMA), or polyethylene glycol (PEG-400) were studied. Events of LLPS with apparent core-shell particle morphology were observed for all samples with both techniques. Chemical imaging with STXM showed that both LSOC/AS and HMMA/AS particles were never homogeneously mixed for all measured RH’s above the deliquescence point and that the majority of the organic component was located in the shell. The shell composition was estimated as 65:35 organic: inorganic in LSOC/AS and as 50:50 organic: inorganic for HMMA/AS. PEG-400/AS particles showed fully homogeneous mixtures at high RH and phase separated below 89-92% RH with an estimated 50:50% organic to inorganic mix in the shell. These two chemical imaging techniques are well suited for in-situ analysis of the hygroscopic behavior, phase separation, and surface composition of collected ambient aerosol particles.

Environmental Molecular Sciences Laboratory↗

Water around fullerene shape amphiphiles: A molecular dynamics simulation study of hydrophobic hydration

Fullerene C{sub 60} sub-colloidal particle with diameter ∼1 nm represents a boundary case between small and large hydrophobic solutes on the length scale of hydrophobic hydration. In the present paper, a molecular dynamics simulation is performed to investigate this complex phenomenon for bare C{sub 60} fullerene and its amphiphilic/charged derivatives, so called shape amphiphiles. Since most of the unique properties of water originate from the pattern of hydrogen bond network and its dynamics, spatial, and orientational aspects of water in solvation shells around the solute surface having hydrophilic and hydrophobic regions are analyzed. Dynamical properties such as translational-rotational mobility, reorientational correlation and occupation time correlation functions of water molecules, and diffusion coefficients are also calculated. Slower dynamics of solvent molecules—water retardation—in the vicinity of the solutes is observed. Both the topological properties of hydrogen bond pattern and the “dangling” –OH groups that represent surface defects in water network are monitored. The fraction of such defect structures is increased near the hydrophobic cap of fullerenes. Some “dry” regions of C{sub 60} are observed which can be considered as signatures of surface dewetting. In an effort to provide molecular level insight into the thermodynamics of hydration, the free energy of solvation is determined for a family of fullerene particles using thermodynamic integration technique.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Energy Decomposition Analysis for Interactions of Radicals: Theory and Implementation at the MP2 Level with Application to Hydration of Halogenated Benzene Cations and Complexes between CO 2 -· and Pyridine and Imidazole

To study intermolecular interactions involving radicals at the correlated level, the energy decomposition analysis scheme for second-order Møller-Plesset perturbation theory based on absolutely localized molecular orbitals (ALMO-MP2-EDA) is generalized to unrestricted and restricted open-shell MP2. The benefit of restricted open-shell MP2 is that it can provide accurate binding energies for radical complexes where density functional theory can be error-prone due to delocalization errors. As a model application, the open-shell ALMO-MP2-EDA is applied to study the first solvation step of halogenated benzene radical cations, where both halogen- and hydrogen-bonded isomers are possible. We determine that the lighter halogens favor the hydrogen-bonded form, while the iodine-substituted species prefers halogen bonding due to larger polarizability and charge transfer at the halogen. As a second application, relevant to the activation of CO 2 in photoelectrocatalysis, complexes of CO 2 -· interacting with both pyridine and imidazole are analyzed with ALMO-MP2-EDA. The results reveal the importance of charge transfer into the π* orbital of the heterocycle in controlling the stability of the carbamate binding mode, which is favored for pyridine but not for imidazole.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Chemical composition, microstructure, and hygroscopic properties of aerosol particles at the Zotino Tall Tower Observatory (ZOTTO), Siberia, during a summer campaign

In this study we describe the hygroscopic properties of accumulation- and coarse-mode aerosol particles sampled at the Zotino Tall Tower Observatory (ZOTTO) in Central Siberia (61° N; 89° E) from 16 to 21 June 2013. The hygroscopic growth measurements were supplemented with chemical analyses of the samples, including inorganic ions and organic/elemental carbon. In addition, the microstructure and chemical composition of aerosol particles were analyzed by X-ray micro-spectroscopy (STXM-NEXAFS) and transmission electron microscopy (TEM). A mass closure analysis indicates that organic carbon accounted for 61 and 38% of PM in the accumulation mode and coarse mode, respectively. The water soluble fraction of organic matter was estimated to be 52 and 8% of PM in these modes. Sulfate, predominantly in the form of ammoniated sulfate, was the dominant inorganic component in both size modes: ~ 34% in the accumulation vs. ~ 47% in the coarse mode. The hygroscopic growth measurements were conducted with a filter-based differential hygroscopicity analyzer (FDHA) over the range of 5–99.4% RH in the hydration and dehydration operation modes. The FDHA study indicates that both accumulation and coarse modes exhibit pronounced water uptake approximately at the same RH, starting at ~ 70%, while efflorescence occurred at different humidities, i.e., at ~ 35% RH for submicron particles vs. ~ 50% RH for supermicron particles. This ~ 15% RH difference was attributed to higher content of organic material in the submicron particles, which suppresses water release in the dehydration experiments. The kappa mass interaction model (KIM) was applied to characterize and parameterize non-ideal solution behavior and concentration-dependent water uptake by atmospheric aerosol samples in the 5–99.4% RH range. Based on KIM, the volume-based hygroscopicity parameter, κ v , was calculated. The κ v, ws value related to the water soluble (ws) fraction was estimated to be ~ 0.15 for the accumulation mode and ~ 0.36 for the coarse mode, respectively. The obtained κ v, ws for the accumulation mode is in good agreement with earlier data reported for remote sites in the Amazon rain forest (κ v ≈ 0.15) and a Colorado boreal forest (κ v ≈ 0.16). We used the Zdanovskii–Stokes–Robinson (ZSR) mixing rule to predict the chemical composition dependent hygroscopicity, κ v, p . The obtained κ v, p values overestimate the experimental FDHA-KIM-derived κ v, ws by factors of 1.8 and 1.5 for the accumulation and coarse modes, respectively. This divergence can be partly explained by incomplete dissolution of the hygroscopic inorganic compounds resulting from kinetic limitations due to a sparingly soluble organic coating. The TEM and STXM-NEXAFS results indicate that aged submicron (>300 nm) and supermicron aerosol particles possess core-shell structures with an inorganic core, and are enriched in organic carbon at the mixed particle surface. The direct FDHA kinetic studies provide a bulk diffusion coefficient of water of ~ 10 −12 cm 2 s −1 indicating a semi-solid state of the organic-rich phase leading to kinetic limitations of water uptake and release during hydration and dehydration cycles. Overall the present ZOTTO data set, obtained in the growing season, has revealed a strong influence of organic carbon on the hygroscopic properties of the ambient aerosols. The sparingly soluble organic coating controls hygroscopic growth, phase transitions, and microstructural rearrangement processes. The observed kinetic limitations can strongly influence the outcome of experiments performed on multi-second time scales, such as the commonly applied HTDMA (Hygroscopicity Tandem Differential Mobility Analyzer) and CCNC (Cloud Condensation Nuclei Counter) measurements.

54 ENVIRONMENTAL SCIENCES↗

Effects of surface hydration on the electron injection rate from graphene to anatase and rutile TiO 2 surfaces

The effect of hydration of anatase (0 0 1), and rutile (0 0 1), (1 0 1) and (1 1 0) surfaces of TiO 2 on the rate of electron capture from an adsorbed graphene sheet is elucidated by means of computation at a level of tight-binding density functional theory. Initially, the clean surfaces are allowed to interact with bulk water. Following an equilibration period, the first solvation shell is exposed to vacuum at 300 K for a sufficiently long period of time to allow any weakly bound water molecules to evaporate or be displaced from the surface. The resultant hydroxylated and originally clean surfaces are used for studying the interaction with a graphene sheet. Comparison of the calculated surface-graphene interaction energies and electron transfer probabilities of a cold electron to clean and hydroxylated surfaces shows that the water-sourced OH layer of these surfaces acts as an insulator in interfacial charge transport of the cold electron.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A TEM study on the very early crystallization of C-S-H in the presence of polycarboxylate superplasticizers: Transformation from initial C-S-H globules to nanofoils

Polycarboxylate superplasticizers (PCEs) present common admixtures to adjust the rheology of concrete. Previous studies revealed that they can also influence the crystallization of cement hydrates, such as e.g. ettringite. In this study, we investigated the impact of methacrylate ester-based PCEs on the nucleation and crystal growth of C-S-H precipitated from aqueous solutions of Ca(NO{sub 3}){sub 2} and Na{sub 2}SiO{sub 3}. TEM imaging revealed that in the absence of PCEs following a non-classical nucleation mechanism C-S-H initially precipitates as metastable, globular nanoparticles (droplets, d ~ 20–60 nm) which within less than one hour convert to the characteristic nanofoils of early C-S-H. In the presence of PCEs, the initial globuli exhibit a core-shell morphology, presumably with PCE as shell. The shell was found to delay the conversion to nanofoils for several hours by stabilizing the metastable globules. The PCE polymer exhibiting higher anionicity delayed the conversion to nanofoils more than the PCE possessing fewer carboxylate groups.

36 MATERIALS SCIENCE↗

Function of the hydration layer around an antifreeze protein revealed by atomistic molecular dynamics simulations

Atomistic molecular dynamics simulations are used to investigate the mechanism by which the antifreeze protein from the spruce budworm, Choristoneura fumiferana, binds to ice. Comparison of structural and dynamic properties of the water around the three faces of the triangular prism-shaped protein in aqueous solution reveals that at low temperature the water structure is ordered and the dynamics slowed down around the ice-binding face of the protein, with a disordering effect observed around the other two faces. These results suggest a dual role for the solvation water around the protein. The preconfigured solvation shell around the ice-binding face is involved in the initial recognition and binding of the antifreeze protein to ice by lowering the barrier for binding and consolidation of the protein:ice interaction surface. Thus, the antifreeze protein can bind to the molecularly rough ice surface by becoming actively involved in the formation of its own binding site. Also, the disruption of water structure around the rest of the protein helps prevent the adsorbed protein becoming covered by further ice growth.

59 BASIC BIOLOGICAL SCIENCES↗

Multi-scale investigation on mechanical behavior and microstructural alteration of C-S-H in carbonated Alite paste

Carbonation treatment is a promising option to enhance recycled concrete aggregate (RCA) quality and eventually improve concrete performance. This study investigated the multi-scale mechanical properties of calcium silicate hydrates (C-S-H) in a mature alite paste subjected to accelerated carbonation treatment by testing macro compressive strength, microhardness and nanoindentation. The results show that, carbonation treatment resulted in a heterogeneous distribution of carbonation products in the alite sample. Reinforcement of C-S-H by the randomly precipitated calcite and vaterite crystals prevailed over the nano-structural and compositional alteration of C-S-H induced by carbonation, leading to an increase of nano-indentation modulus at the edge of the sample. Also, the microhardness at the edge zone was markedly higher than that at the core of the carbonated sample. The carbonated peripheral zone with improved nano-scale modulus and microhardness was likely serving as a “hard shell”, contributing to the improved macro compressive strength. The new insights into the multi-scale mechanical properties of carbonated C-S-H contribute to further understanding of the enhanced properties of RCA after carbonation treatment.

36 MATERIALS SCIENCE↗

Water distributions in PS-b-P(S-g-PEO) block grafted copolymer system in aqueous solutions revealed by contrast variation SANS study

In this report, we present a contrast variation small angle neutron scattering (SANS) study of PS-b-P(S-g-PEO) block graft copolymers in aqueous media at a concentration of 10 mg/ml. Through varying the solvent D2O/H2O ratio, the scattering contributions from the water molecules and the micellar constituent components can be determined. Based on the commonly used core-shell model, a theoretical coherent scattering cross section incorporating the effect of water penetration is developed and used to analyze the SANS I(Q), we have successfully quantified the micellar structure and the number of - water molecules associated with the core and corona. We have found that the overall micellar hydration level increase with the increase in the molecular weight of hydrophilic PEO side chains. This study provides key information in understanding solvent distributions within self-assembled amphiphilic block grafted copolymers.

Chen, Wei-Ren↗

Trends in Aqueous Hydration Across the 4f Period Assessed by Reliable Computational Methods

The geometric and electronic structures, as well as the thermodynamic properties of trivalent lanthanide hydrates {Ln(H₂O)₈,₉ 3+ and Ln(H₂O)₈,₉(H₂O)₁₂,₁₄ 3+ , Ln = La – Lu} have been examined using unrestricted density functional theory (UDFT), unrestricted M€oller-Plesset perturbation theory (UMP2), and multiconfigurational self-consistent field methods (MCSCF). While Ln-hydrates with 2-5 unpaired f-electrons have some multiconfigurational character, the correlation energy lies within 5-7 kcal/mol across the period and for varying coordination numbers. As such DFT yields structural parameters and thermodynamic data quite close to experimental values. Both UDFT and UMP2 predict free energies of water addition to the Ln(H₂O)₈ 3+ species to become less favorable across the period; however, it is a non-linear function of the surface charge density of the ion. UDFT further predicts that the symmetry of the metal-water bond lengths is sensitive to the specific f-electron configuration, presumably because of repulsive interactions between filled f-orbitals and water lone-pairs. Within the Ln(H₂O)₈,₉(H₂O)₁₂,₁₄ 3+ clusters, interactions between solvation shells overrides this orbital effect, increasing the accuracy of the geometric parameters and calculated vibrational frequencies. Calculated atomic charges indicate that the water ligands each donate 0.1 to 0.2 electrons to the Ln(III) metals, with increasing electron donation across the period. Significant polarization and charge transfer between solvation shells is also observed. The relationship between empirical effective charges and calculated atomic charges is discussed with suggestions for reconciling the trends across the period.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Water Defect Stabilizes the Bi 3+ Lone-Pair Electronic State Leading to an Unusual Aqueous Hydration Structure

In this work, the aqueous hydration structure of Bi 3+ is probed using a combination of extended X-ray absorption fine structure (EXAFS) spectroscopy and density functional theory (DFT) simulations of ion-water clusters and of condensed-phase solutions. Anomalous features in the EXAFS spectra are found to be associated with a highly asymmetric first-solvent water shell. The aqueous chemistry and structure of the Bi 3+ ion is dramatically controlled by the water stabilization of a lone-pair electronic state involving the mixed 6s and 6p orbitals. This leads to a distinct multi-modal distribution of waters in the first shell that are separated by about 0.2Å. The lone-pair structure is stabilized by a collective response of multiple waters that are localized near the lone-pair anti-bonding site. The findings indicate that the lone-pair stereochemistry of aqueous Bi 3+ plays a major role in the binding of water and ligands in aqueous solutions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Rate theory of solvent exchange and kinetics of Li{sup +} − BF{sub 4}{sup −}/PF{sub 6}{sup −} ion pairs in acetonitrile

In this paper, we describe our efforts to apply rate theories in studies of solvent exchange around Li{sup +} and the kinetics of ion pairings in lithium-ion batteries (LIBs). We report one of the first computer simulations of the exchange dynamics around solvated Li{sup +} in acetonitrile (ACN), which is a common solvent used in LIBs. We also provide details of the ion-pairing kinetics of Li{sup +}-[BF{sub 4}] and Li{sup +}-[PF{sub 6}] in ACN. Using our polarizable force-field models and employing classical rate theories of chemical reactions, we examine the ACN exchange process between the first and second solvation shells around Li{sup +}. We calculate exchange rates using transition state theory and weighted them with the transmission coefficients determined by the reactive flux, Impey, Madden, and McDonald approaches, and Grote-Hynes theory. We found the relaxation times changed from 180 ps to 4600 ps and from 30 ps to 280 ps for Li{sup +}-[BF{sub 4}] and Li{sup +}-[PF{sub 6}] ion pairs, respectively. These results confirm that the solvent response to the kinetics of ion pairing is significant. Our results also show that, in addition to affecting the free energy of solvation into ACN, the anion type also should significantly influence the kinetics of ion pairing. These results will increase our understanding of the thermodynamic and kinetic properties of LIB systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Coordination environment of Si in calcium silicate hydrates, silicate minerals, and blast furnace slags: A XANES database

Understanding the silicate polymerization of calcium silicate hydrate (C-S-H) gel and its crystalline polymorphs is important in cement science. NMR can determine Si environments, but the measurement can be time-consuming and provides no spatial information. X-ray absorption near-edge structure (XANES) spectroscopy is a fast tool for probing Si coordination, possibly with spatial information. However, there lacks an understanding of Si K-edge XANES spectra of cement-related silicate phases. Here, a Si K-edge XANES spectral database of nanocrystalline C-S-H, C-S-H minerals, blast-furnace slags, and metakaolin is provided. Si K-edge of C-S-H minerals shifts to higher energies with higher polymerized Si and lower CaSi connectivity in the Si second nearest neighbor shell. Si K-edge energy shows weak correlations with Ca/Si ratio, average SiO bond length, and SiO{sub 4} distortion due to the structural complexity of silicates. The substitution of Al for Si shifts the Si K-edge of tobermorite and slags to higher energies.

36 MATERIALS SCIENCE↗

Tunable Encapsulation Structure of Block Copolymer Coated Single-Walled Carbon Nanotubes in Aqueous Solution

The nano-sized and shape-tunable molecular building blocks can provide great opportunities for the fabrication of precisely controlled nanostructures. In this work, we have fabricated a molecular building block of single-walled carbon nanotubes (SWNTs) coated by PPO-PEO-PPO block copolymers whose encapsulation structure can be controlled via temperature or addition of small molecules. The structure and optical properties of SWNT-block copolymers have been investigated by small angle neutron scattering (SANS), ultraviolet-visible (UV-vis) spectroscopy, atomic force microscopy (AFM), and molecular dynamics (MD) simulation. The structure of the hydrated block copolymer layer surrounding SWNT can be controlled reversibly by varying temperature as well as by irreversibly adding 5-methylsalicylic acid (5MS). Increasing hydrophobicity of the polymers with temperature and strong tendency of 5MS to interact with both block copolymers and orbitals of the SWNTs are likely to be responsible for the significant structural change of the block copolymer encapsulation layer, from loose corona shell to tightly encapsulating compact shell. These result shows an efficient and simple way to fabricate and manipulate carbon-based nano building blocks in aqueous systems with tunable structure.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Polar liquids at charged interfaces: A dipolar shell theory

The structure of polar liquids and electrolytic solutions, such as water and aqueous electrolytes, at interfaces underlies numerous phenomena in physics, chemistry, biology, and engineering. In this work, we develop a continuum theory that captures the essential features of dielectric screening by polar liquids at charged interfaces, including decaying spatial oscillations in charge and mass, starting from the molecular properties of the solvent. The theory predicts an anisotropic dielectric tensor of interfacial polar liquids previously studied in molecular dynamics simulations. We explore the effect of the interfacial polar liquid properties on the capacitance of the electrode/electrolyte interface and on hydration forces between two plane-parallel polarized surfaces. In the linear response approximation, we obtain simple formulas for the characteristic decay lengths of molecular and ionic profiles at the interface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure and Dynamics of N, N-diethyl-N-methylammonium Triflate Ionic Liquid, Neat and with Water, from Molecular Dynamics Simulations

We investigated by means of molecular dynamics simulations the properties (structure, thermodynamics, ion transport, and dynamics) of the protic ionic liquid N,N-diethyl-N-methyl-ammonium triflate (dema:Tfl) and of selected aqueous mixtures of dema:Tfl. This ionic liquid, a good candidate for a water-free proton exchange membrane, is shown to exhibit high ion mobility and conductivity. For bulk melts in the temperature range of 303-453K, both liquid densities and enthalpies of vaporization are found to decrease roughly linearly with increasing temperature. The radial distribution functions reveal a significant long-range structural correlation. The ammonium cations [dema]+ are found to diffuse slightly faster than the triflate anions [Tfl]-, and both types of ions exhibit enhanced mobility at higher temperatures, leading to higher ionic conductivity of these ionic liquids. Analysis of the dynamics of ion pairing clearly points to the existence of long-lived contact ion pairs in this ionic liquid. We also examined the effects of water on the ionic properties of dema:Tfl-water mixtures. From the structural analysis it was found that water molecules tend to replace counter ions in the coordination shell and hydrogen bond to both ions, thus weakening their mutual association. As water concentration increases, water molecules start to connect with each other and eventually form a large network that percolates through the system. It is also found that water has a strong influence on the ion dynamics in the mixtures. As the concentration of water increases, both translational and rotational motion of [dema]+ and [Tfl]- are significantly enhanced. As a result, higher ionic conductivity is observed with increased hydration level. This work was supported by the US Department of Energy Basic Energy Sciences' Chemical Sciences, Geosciences & Biosciences Division. Pacific Northwest National Laboratory is operated by Battelle for the US Department of Energy.

08 HYDROGEN↗

Molecular dynamics simulations of alkaline earth metal ions binding to DNA reveal ion size and hydration effects

The identity of metal ions surrounding DNA is key to its biological function and materials applications. In this work, we compare atomistic molecular dynamics simulations of double strand DNA (dsDNA) with four alkaline earth metal ions (Mg 2+ , Ca 2+ , Sr 2+ , and Ba 2+ ) to elucidate the physical interactions that govern DNA–ion binding. Simulations accurately model the ion–phosphate distance of Mg 2+ and reproduce ion counting experiments for Ca 2+ , Sr 2+ , and Ba 2+ . Our analysis shows that alkaline earth metal ions prefer to bind at the phosphate backbone compared to the major groove and negligible binding occurs in the minor groove. Larger alkaline earth metal ions with variable first solvation shells (Ca 2+ , Sr 2+ , and Ba 2+ ) show both direct and indirect binding, where indirect binding increases with ion size. Mg 2+ does not fit this trend because the strength of its first solvation shell predicts indirect binding only. Ions bound to the phosphate backbone form fewer contacts per ion compared to the major groove. Within the major groove, metal ions preferentially bind to guanine–cystosine base pairs and form simultaneous contacts with the N7 and O6 atoms of guanine. Overall, we find that the interplay among ion size, DNA–ion interaction, and the size and flexibility of the first solvation shell are key to predicting how alkaline earth metal ions interact with DNA.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗