Search NASA⌕ Search

SEARCH · Search NASA

Results for “induction generator”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Integrating Realizability Checking in FRET

Realizability (alternatively referred to as relative consistency or implementability) - checking whether a specification can be implemented by an open system - has been the subject of extensive study. Realizability can be viewed as a stronger analysis method when compared to consistency checking in that it does not only check whether the system works in some environment, but instead whether the system works in all environments. In this report, we experiment and build on the approach presented by Gacek et al. that supports checking realizability of contracts involving infinite theories using SMT solvers. In particular, we 1) extend the Formal Requirements Elicitation Tool (FRET) to support generation of Lustre contracts that can be checked for realizability with the JKind k-induction and fix point generation engines; 2) study a compositional way for checking realizability based on the notion of connected components; and 3) test our approach and the capabilities of the JKind realizability engines on a large subset of the Lockheed Martin Cyber Physical System Challenge Problems.

Kooi, David↗

SLIM, Short-pulse Technology for High Gradient Induction Accelerators

A novel short-pulse concept (SLIM) suited to a new generation of a high gradient induction particle accelerators is described herein. It applies advanced solid state semiconductor technology and modern microfabrication techniques to a coreless induction method of charged particle acceleration first proven on a macro scale in the 1960's. Because this approach avoids use of magnetic materials there is the prospect of such an accelerator working efficiently with accelerating pulses in the nanosecond range and, potentially, at megahertz pulse rates. The principal accelerator section is envisioned as a stack of coreless induction cells, the only active element within each being a single, extremely fast (subnanosecond) solid state opening switch: a Drift Step Recovery Diode (DSRD). Each coreless induction cell incorporates an electromagnetic pulse compressor in which inductive energy developed within a transmission-line feed structure over a period of tens of nanoseconds is diverted to the acceleration of the passing charge packet for a few nanoseconds by the abrupt opening of the DSRD switch. The duration of this accelerating output pulse--typically two-to-four nanoseconds--is precisely determined by a microfabricated pulse forming line connected to the cell. Because the accelerating pulse is only nanoseconds in duration, longitudinal accelerating gradients approaching 100 MeV per meter are believed to be achievable without inciting breakdown. Further benefits of this approach are that, (1) only a low voltage power supply is required to produce the high accelerating gradient, and, (2) since the DSRD switch is normally closed, voltage stress is limited to a few nanoseconds per period, hence the susceptibility to hostile environment conditions such as ionizing radiation, mismatch (e.g. in medical applications the peak beam current may be low), strong electromagnetic noise levels, etc is expected to be minimal. Finally, we observe the SLIM concept is not limited to linac applications; for instance, it could be employed to both accelerate the beam and to stabilize the superbunch mode of operation in circular track machines.

43 PARTICLE ACCELERATORS↗

Preshot Predictions for LA-43S-1 using the Eulerian AMR Code Roxane

The Ranchero Magnetic Flux Compression Generator (FCG) has been used to create current pulses in the 10-100 MA range for driving both “static” low inductance (0.5 nH) loads1 for generator demonstration purposes and high inductance (10-20 nH) imploding liner loads for ultimate use in physics experiments at very high energy density. This report offers a description of these efforts.

42 ENGINEERING↗

CHI Research. Final Technical Report

The spherical tokamak is a leading candidate for a Fusion Nuclear Science Facility (FNSF) due to its compact size and modular configuration. It is highly desirable for the FNSF to be compact in size and simpler in configuration. Since the central solenoid cannot be used for driving current during the steady-state phase, the tokamak design would also be simplified if it could be built without the solenoid, and it would allow access to lower aspect ratio configurations. Great progress has been made in developing Transient CHI as a viable solenoid-free plasma start-up method. These are: (a) The generation of closed flux current in HIT-II and NSTX, and the successful coupling of this current to induction from the central solenoid, (b) the generation of 0.1 MA closed flux current in HIT-II and demonstration of CHI plasma quality similar to that produced inductively, (c) the generation of a record 0.2 MA of closed flux current in NSTX and the coupling of the CHI-produced discharge in NSTX to induction with subsequent transitioning to a high-performance H-mode discharge when neutral beams were injected and (e) CHI-started discharges to which induction has been applied have ramped-up to 1 MA in NSTX with record low flux consumption. Modeling of the CHI process using TSC and NIMROD has led to a much-improved understanding of the physics of magnetic reconnection leading to large volume flux closure. The NIMROD results indicate that this reconnection mechanism scales to arbitrarily high toroidal field and can be either axisymmetric Sweet-Parker like reconnection or it can be enhanced through plasmoid formation. Motivated by the exciting experimental and modeling results from HIT-II and NSTX, we explored the application of CHI to a reactor configuration, and identified methods for enabling CHI capability in a FNSF-sized experiment. In the first, proven, concept referred to as "NSTX-like", the entire blanket structure is insulated from the vessel using insulating supports. In the second configuration referred to as "DIII-D - like", a toroidal insulated electrode is placed on top of the blanket structure to shield the insulator from neutrons, allowing more than six years of full power operations before insulator replacement. The second concept requires an experimental test for concept validation. To test this second concept, during the period of 2013 to 2016, we designed and implemented a new simpler design CHI configuration on QUEST. Initial TSC modeling and experimental results suggests that work on QUEST may lead to a simpler Transient CHI configuration for a ST-FNSF. Transient CHI is now also in the process of being implemented on the PEGASUS ST at the University of Washington to study very high-current start-up potential of transient CHI.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Rule induction techniques

Expert System technology is receiving more and more consideration these days when it comes time for selecting an implementation paradigm. As people become educated as to which domains Expert Systems technology can be appropriately utilized and to what extent this capability can be made useful, they will want to extend this ability to encompass greater responsibilities of their everyday routines. Knowledge Acquisition is one of the most time-consuming phases of an Expert System development process. One must extract the essential knowledge from a source by whatever means, and transform this knowledge into a representation that can be demonstrated. Rule Induction is one technique that can be applied to the knowledge acquisition process for certain example-based problems. Spread Sheets and Data Bases for example, may contain columns of information (criteria) to be used in some sort of decision making policy. These criteria could automatically be converted (represented) into production rules that output an appropriate decision dependent upon a given set of criteria. To generalize this concept, we could state that Rule Induction is the process of generating a Knowledge Base from a given set of examples. Through the use of Rule Induction, I will explain how I took information from a database and generated rules encapsulating the information contained within the database.

Young, Gary B.↗

Control of large wind turbine generators connected to utility networks

This is an investigation of the control requirements for variable pitch wind turbine generators connected to electric power systems. The requirements include operation in very small as well as very large power systems. Control systems are developed for wind turbines with synchronous, induction, and doubly fed generators. Simulation results are presented. It is shown how wind turbines and power system controls can be integrated. A clear distinction is made between fast control of turbine torque, which is a peculiarity of wind turbines, and slow control of electric power, which is a traditional power system requirement.

Hinrichsen, E. N.↗

Oxidative stress and oxidative damage in chemical carcinogenesis

Reactive oxygen species (ROS) are induced through a variety of endogenous and exogenous sources. Overwhelming of antioxidant and DNA repair mechanisms in the cell by ROS may result in oxidative stress and oxidative damage to the cell. This resulting oxidative stress can damage critical cellular macromolecules and/or modulate gene expression pathways. Cancer induction by chemical and physical agents involves a multi-step process. This process includes multiple molecular and cellular events to transform a normal cell to a malignant neoplastic cell. Oxidative damage resulting from ROS generation can participate in all stages of the cancer process. An association of ROS generation and human cancer induction has been shown. It appears that oxidative stress may both cause as well as modify the cancer process. Recently association between polymorphisms in oxidative DNA repair genes and antioxidant genes (single nucleotide polymorphisms) and human cancer susceptibility has been shown.

60 APPLIED LIFE SCIENCES↗

S-band relativistic magnetron operation with an active plasma cathode

Results of experimental research on a relativistic S-band magnetron with a ferroelectric plasma source as a cathode are presented. The cathode plasma was generated using a driving pulse (approx3 kV, 200 ns) applied to the ferroelectric cathode electrodes via inductive decoupling prior to the beginning of an accelerating pulse (200 kV, 150 ns) delivered by a linear induction accelerator. The magnetron and generated microwave radiation parameters obtained for the ferroelectric plasma cathode and the explosive emission plasma were compared. It was shown that the application of the ferroelectric plasma cathode allows one to avoid a time delay in the appearance of the electron emission to achieve a better matching between the magnetron and linear induction accelerator impedances and to increase significantly (approx30%) the duration of the microwave pulse with an approx10% increase in the microwave power. The latter results in the microwave radiation generation being 30% more efficient than when the explosive emission cathode is used, where efficiency does not exceed 20%.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Jay Carter Enterprises, Incorporated steam engine

The Small Community Solar Thermal Power Experiment (SCSE) selected an organic rankine cycle (ORC) engine driving a high speed permanent magnet alternator (PMA) as the baseline power conversion subsystem (PCS) design. The back-up conceptual PCS design is a steam engine driving an induction alternator delivering power directly to the grid. The development of the automotive reciprocating simple rankine cycle steam engine and how an engine of similar design might be incorporated into the SCSE is discussed. A description of the third generation automotive engine is included along with some preliminary test data. Tests were conducted with the third generation engine driving an induction alternator delivering power directly to the grid. The purpose of these tests is to further verify the effects of expander inlet temperature, input thermal power level, expansion ratio, and other parameters affecting engine performance to aid in the development of an SCSE PCS.

Source record↗

A limitation of the generation of magnetic fields

Simple arguments are put forward to show that the currents produced in disks by radiative or other types of drag forces on electrons must give rise to extraordinarily small magnetic fields. The field strengths are consistent with earlier (more complex) treatments of this class of problem, but inconsistent with the claims of recent papers in the literature. The discrepancies involve the treatment of self-induction. Ion-electron inductive coupling limits the generated magnetic field to have an associated ion Larmor radius greater than or of order of the radius of the disk, a result which follows most directly from conservation of canonical ion momentum, p + eA/c. An explicit time-dependent model for the buildup of the field leads to the same conclusion. If internal velocity gradient scales are smaller than the ion Larmor radius, and the plasma is not collision dominated, standard dynamo amplification within the disk is hardly likely to be effective. But to explain the Galactic field, dynamo amplification in a collisional plasma is also likely to be problematic. The difficulties posed by the existence of ordered Galactic-scale magnetic fields are made all the more acute by the simplicity and the scope of the discussed field limitation.

Balbus, Steven A.↗

Feedback control of plasma electron density and ion energy in an inductively coupled plasma etcher

Here the authors report the development of a fuzzy logic based feedback control of the plasma electron density and ion energy for high density plasma etch process. The plasma electron density was measured using their recently developed transmission line microstrip microwave interferometer mounted on the chamber wall, and the rf voltage was measured by a commercial impedance meter connected to the wafer stage. The actuators were two 13.56 MHz rf power generators which provided the inductively coupled plasma power and bias power, respectively. The control system adopted the fuzzy logic control algorithm to reduce frequent actuator action resulting from measurement noise. The experimental results show that the first wafer effect can be eliminated using closed-loop control for both poly-Si and HfO{sub 2} etching. In particular, for the HfO2 etch, the controlled variables in this work were much more effective than the previous one where ion current was controlled, instead of the electron density. However, the pressure disturbance effect cannot be reduced using plasma electron density feedback.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Use of a radial self-field diode geometry for intense pulsed ion beam generation at 6 MeV on Hermes III

We investigate the generation of intense pulsed focused ion beams at the 6 MeV level using an inductive voltage adder (IVA) pulsed-power generator, which employs a magnetically insulated transmission line (MITL). Such IVA machines typical run at an impedance of few tens of Ohms. Previous successful intense ion beam generation experiments have often featured an “axial” pinch-reflex ion diode (i.e., with an axial anode-cathode gap) and operated on a conventional Marx generator/water line driver with an impedance of a few Ohms and no need for an MITL. The goals of these experiments are to develop a pinch-reflex ion diode geometry that has an impedance to efficiently match to an IVA, produces a reasonably high ion current fraction, captures the vacuum electron current flowing forward in the MITL, and focuses the resulting ion beam to small spot size. A new “radial” pinch-reflex ion diode (i.e., with a radial anode-cathode gap) is found to best demonstrate these properties. Operation in both positive and negative polarities was undertaken, although the negative polarity experiments are emphasized. Particle-in-cell (PIC) simulations are consistent with experimental results indicating that, for diode impedances less than the self-limited impedance of the MITL, almost all of the forward-going IVA vacuum electron flow current is incorporated into the diode current. PIC results also provide understanding of the diode-impedance and ion-focusing properties of the diode. In addition, a substantial high-energy ion population is also identified propagating in the “reverse” direction, i.e., from the back side of the anode foil in the electron beam dump.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Pulsed inductive HF laser

We report the results of experimentally investigated dependences of temporal, spectral and spatial characteristics of an inductive HF-laser generation on the pump conditions. Gas mixtures H{sub 2} – F{sub 2}(NF{sub 3} or SF6{sub 6}) and He(Ne) – H{sub 2} – F{sub 2}(NF{sub 3} or SF{sub 6}) were used as active media. The FWHM pulse duration reached 0.42 μs. This value corresponded to a pulsed power of 45 kW. For the first time, the emission spectrum of an inductive HF laser was investigated, which consisted of seven groups of bands with centres around the wavelengths of 2732, 2736, 2739, 2835, 2837, 2893 and 2913 nm. The cross section profile of the laser beam was a ring with a diameter of about 20 mm and width of about 5 mm. Parameters of laser operation in the repetitively pulsed regime were sufficiently stable. The amplitude instability of light pulses was no greater than 5% – 6%. (lasers)

74 ATOMIC AND MOLECULAR PHYSICS↗

Optical and electrical characterization of pulse-modulated argon atmospheric-pressure inductively coupled microplasma jets

The critical parameters determining the generation of the pulse-modulated argon atmospheric-pressure inductively coupled plasma (AP-ICP) microjet were studied by varying the power, P, pulse-modulation frequency, f, and duty ratio, DR. The temporal changes in the net output power, P{sub net}, monitored between the very high frequency power supply and matching network by an rf sampler, and ArI 4s{sup '}[1/2]{sub 1}{sup O}-4p{sup '}[1/2]{sub 0} emission from the antenna were measured to elucidate the behavior of this plasma. The AP-ICP microjet, which produces high-density (0.9-1.1x10{sup 15} cm{sup -3}) nonequilibrium plasma, consists of an alumina discharge tube with the inner diameter of 0.8 mm. The generation diagram of the pulse-modulated plasma was created by having f as the horizontal axis and DR as the vertical axis while varying P up to 50 W. At f{<=}10 kHz, the plasma was generated at above the linear lines of f and DR, which indicated the existence of the critical power-off period of approximately 80 {mu}s. At f>10 kHz, the pulse-modulated plasma was produced above constant DR and almost independent of f. The time-averaged power, P, which is the product of P and DR, had to be more than 8-10 W to sustain the pulse-modulated plasma. From the measurement of the temporal changes in the net power and ArI emission, the dynamic behavior of the pulse-modulated plasma was revealed as follows. The prebreakdown period was present for {approx}5 {mu}s after the power was turned on. Once the plasma was generated, the impedance was changed and the reflected power gradually decreased. A strong emission peak was observed immediately after the breakdown, followed by the gradual increase up to the steady state. Finally, the intense afterpeak was observed at 0.8 {mu}s after the power was turned off.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The role of heme oxygenase-1 in drug metabolizing dysfunction in the alcoholic fatty liver exposed to ischemic injury

This study was designed to investigate the role of heme oxygenase-1 (HO-1) in hepatic drug metabolizing dysfunction after ischemia/reperfusion (IR) in alcoholic fatty liver (AFL). Rats were fed a Lieber–DeCarli diet for five weeks to allow for development of AFL and were then subjected to 90 min of hepatic ischemia and 5 h of reperfusion. Rats were pretreated with hemin (HO-1 inducer) or ZnPP (HO-1 inhibitor) for 16 h and 3 h before hepatic ischemia. After hepatic IR, ethanol diet (ED)-fed rats had higher serum aminotransferase activities and more severe hepatic necrosis compared to the control diet (CD)-fed rats. These changes were attenuated by hemin and exacerbated by ZnPP. The activity and gene expression of HO-1 and its transcription factor (Nrf2) level increased significantly after 5 h of reperfusion in CD-fed rats but not in ED-fed rats. After reperfusion, cytochrome P450 (CYP) 1A1, 1A2, and 2B1 activities were reduced to levels lower than those observed in sham group, whereas CYP2E1 activity increased. The decrease in CYP2B1 activity and the increase in CYP2E1 activity were augmented after hepatic IR in ED-fed animals. These changes were significantly attenuated by hemin but aggravated by ZnPP. Finally, CHOP expression and PERK phosphorylation, microsomal lipid peroxidation, and levels of proinflammatory mediators increased in ED-fed rats compared to CD-fed rats after reperfusion. These increases were attenuated by hemin. Our results suggest that AFL exacerbates hepatic drug metabolizing dysfunction during hepatic IR via endoplasmic reticulum stress and lipid peroxidation and this is associated with impaired HO-1 induction. - Highlights: • Endogenous HO-1 is generated in insufficient quantities in steatotic ischemic injury. • Impaired HO-1 induction leads to excessive ER stress response and lipid peroxidation. • Alcoholic steatosis exacerbates IR-induced hepatic drug-metabolizing dysfunction. • HO-1 induction is required for appropriate medication in patients with steatosis.

60 APPLIED LIFE SCIENCES↗

Induction of hsp70, hsp60, hsp83 and hsp26 and oxidative stress markers in benzene, toluene and xylene exposed Drosophila melanogaster: Role of ROS generation

Exposure to benzene, toluene and xylene in the human population may pose a health risk. We tested a working hypothesis that these test chemicals cause cellular toxicity to a non-target organism, Drosophila melanogaster. Third instar larvae of D. melanogaster transgenic for hsp70, hsp83 and hsp26 and Oregon R{sup +} strain were exposed to 1.0-100.0 mM benzene, toluene and xylene for 2-48 h to examine the heat shock proteins (hsps), ROS generation, anti-oxidant stress markers and developmental end points. The test chemicals elicited a concentration- and time-dependent significant (p < 0.01) induction of the hsps in the exposed organism in the order of hsp70 > hsp83 {>=} hsp26 as evident by {beta}-galactosidase activity after 24 h. RT-PCR amplification studies in Oregon R{sup +} larvae revealed a similar induction pattern of these genes along with hsp60 in the order of hsp70 > hsp60 > hsp26 {>=} hsp83. Under similar experimental conditions, a significant induction of ROS generation and oxidative stress markers viz. superoxide dismutase, catalase, glutathione S-transferase, thioredoxin reductase, glutathione, malondialdehyde and protein carbonyl content was observed. Sub-organismal response was propagated towards organismal response i.e., a delay in the emergence of flies and their reproductive performance. While hsp70 was predominantly induced in the organism till 24 h of treatment with the test chemicals, a significant or insignificant regression of Hsp70 after 48 h was concurrent with a significant induction (p < 0.01) of hsp60 > hsp83 {>=} hsp26 in comparison to the former. A significant positive correlation was observed between ROS generation and these hsps in the exposed organism till 24 h and a negative correlation between ROS generation and hsp70 in them after 48 h indicating a modulatory role of ROS in the induction of hsps. The study suggests that among the tested hsps, hsp70 may be used as an early bioindicator of cellular toxicity against benzene, toluene and xylene and D. melanogaster as an alternative animal model for screening the risk posed by environmental chemicals.

60 APPLIED LIFE SCIENCES↗

Finite element residual stress analysis of induction heating bended ferritic steel piping

Recently, there is a trend to apply the piping bended by induction heating process to nuclear power plants. Residual stress can be generated due to thermo-mechanical mechanism during the induction heating bending process. It is well-known that the residual stress has important effect on crack initiation and growth. The previous studies have focused on the thickness variation. In part, some studies were performed for residual stress evaluation of the austenitic stainless steel piping bended by induction heating. It is difficult to find the residual stresses of the ferritic steel piping bended by the induction heating. The study assessed the residual stresses of induction heating bended ferriticsteel piping via finite element analysis. As a result, it was identified that high residual stresses are generated on local outersurface region of the induction heating bended ferritic piping.

36 MATERIALS SCIENCE↗

Surface modification of amorphous nanosilica particles suppresses nanosilica-induced cytotoxicity, ROS generation, and DNA damage in various mammalian cells

Highlights: Black-Right-Pointing-Pointer There is increasing concern regarding the potential health risks of nanomaterials. Black-Right-Pointing-Pointer We evaluated the effect of surface properties of nanomaterials on cellular responses. Black-Right-Pointing-Pointer We showed that the surface properties play an important in determining its safety. Black-Right-Pointing-Pointer These data provide useful information for producing safer nanomaterials. -- Abstract: Recently, nanomaterials have been utilized in various fields. In particular, amorphous nanosilica particles are increasingly being used in a range of applications, including cosmetics, food technology, and medical diagnostics. However, there is concern that the unique characteristics of nanomaterials might induce undesirable effects. The roles played by the physical characteristics of nanomaterials in cellular responses have not yet been elucidated precisely. Here, by using nanosilica particles (nSPs) with a diameter of 70 nm whose surface was either unmodified (nSP70) or modified with amine (nSP70-N) or carboxyl groups (nSP70-C), we examined the relationship between the surface properties of nSPs and cellular responses such as cytotoxicity, reactive oxygen species (ROS) generation, and DNA damage. To compare the cytotoxicity of nSP70, nSP70-N, or nSP70-C, we examined in vitro cell viability after nSP treatment. Although the susceptibility of each cell line to the nSPs was different, nSP70-C and nSP70-N showed lower cytotoxicity than nSP70 in all cell lines. Furthermore, the generation of ROS and induction of DNA damage in nSP70-C- and nSP70-N-treated cells were lower than those in nSP70-treated cells. These results suggest that the surface properties of nSP70 play an important role in determining its safety, and surface modification of nSP70 with amine or carboxyl groups may be useful for the development of safer nSPs. We hope that our results will contribute to the development of safer nanomaterials.

60 APPLIED LIFE SCIENCES↗