Search NASA⌕ Search

SEARCH · Search NASA

Results for “intense”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Automated acoustic intensity measurements and the effect of gear tooth profile on noise

Acoustic intensity measurements were made at NASA Lewis Research Center on a spur gear test apparatus. The measurements were obtained with the Robotic Acoustic Intensity Measurement System developed by Cleveland State University. This system provided dense spatial positioning, and was calibrated against a high quality acoustic intensity system. The measured gear noise compared gearsets having two different tooth profiles. The tests evaluated the sound field of the different gears for two speeds and three loads. The experimental results showed that gear tooth profile had a major effect on measured noise. Load and speed were found to have an effect on noise also.

Atherton, William J.↗
NASA NTRS1986

Simultaneous polar cap and magnetotail observations of intense polar rain

The significance of acceleration processes in accounting for the energies and temperatures of the electrons seen during periods of intense polar rain is investigated along with the role of the IMF and solar wind in controlling the polar rain. Evidence for an acceleration region is sought by comparing DMSP observations of the precipitating electrons over the polar cap with simultaneous ISEE 1 electron measurements in the conjugate tail lobe at distances between 10 and 22.6 earth radii. The second question is explored by examining the solar wind and IMF conditions during which the intense polar rain events occur. It is found that intense polar rain can pass through the tail lobes without undergoing acceleration between 22.6 earth radii and 800 km altitude.

Greenspan, M. E.↗
NASA NTRS1987

Criteria of interplanetary parameters causing intense magnetic storms (Dst less than -100nT)

Ten intense storms occurred during the 500 days of August 16, 1978 to December 28, 1979. From the analysis of ISEE-3 field and plasma data, it is found that the interplanetary cause of these storms are long-duration, large and negative IMF B sub Z events, associated with interplanetary duskward-electric fields greater than 5 mV/m. Because a one-to-one relationship was found between these interplanetary events and intense storms, it is suggested that these criteria can, in the future, be used as predictors of intense storms by an interplanetary monitor such as ISEE-3. These B sub Z events are found to occur in association with large amplitudes of the IMF magnitude within two days after the onset of either high-speed solar wind streams or of solar wind density enhancement events, giving important clues to their interplanetary origin. Some obvious possibilities will be discussed. The close proximity of B sub Z events and magnetic storms to the onset of high speed streams or density enhancement events is in sharp contrast to interplanetary Alfven waves and HILDCAA events previously reported, and thus the two interplanetary features corresponding geomagnetic responses can be thought of as being complementary in nature. An examination of opposite polarity B sub Z events with the same criteria show that their occurrence is similar both in number as well as in their relationship to interplanetary disturbances, and that they lead to low levels of geomagnetic activity.

Gonzalez, Walter D.↗
NASA NTRS1988

Strain intensity factor approach for predicting the strength of continuously reinforced metal matrix composites

A method was previously developed to predict the fracture toughness (stress intensity factor at failure) of composites in terms of the elastic constants and the tensile failing strain of the fibers. The method was applied to boron/aluminum composites made with various proportions of 0 to + or - 45 deg plies. Predicted values of fracture toughness were in gross error because widespread yielding of the aluminum matrix made the compliance very nonlinear. An alternate method was developed to predict the strain intensity factor at failure rather than the stress intensity factor because the singular strain field was not affected by yielding as much as the stress field. Strengths of specimens containing crack-like slits were calculated from predicted failing strains using uniaxial stress-strain curves. Predicted strengths were in good agreement with experimental values, even for the very nonlinear laminates that contained only + or - 45 deg plies. This approach should be valid for other metal matrix composites that have continuous fibers.

Poe, C. C., Jr.↗
NASA NTRS1988

Resolved shear stress intensity coefficient and fatigue crack growth in large crystals

Fatigue crack growth in large grain Al alloy was studied. Fatigue crack growth is caused primarily by shear decohesion due to dislocation motion in the crack tip region. The crack paths in the large crystals are very irregular and zigzag. The crack planes are often inclined to the loading axis both in the inplane direction and the thickness direction. The stress intensity factors of such inclined cracks are approximated from the two dimensional finite element calculations. The plastic deformation in a large crystal is highly anisotropic, and dislocation motion in such crystals are driven by the resolved shear stress. The resolved shear stress intensity coefficient in a crack solid, RSSIC, is defined, and the coefficients for the slip systems at a crack tip are evaluated from the calculated stress intensity factors. The orientations of the crack planes are closely related to the slip planes with the high RSSIC values. If a single slip system has a much higher RSSIC than all the others, the crack will follow the slip plane, and the slip plane becomes the crack plane. If two or more slip systems have a high RSSIC, the crack plane is the result of the decohesion processes on these active slip planes.

Chen, QI↗
NASA NTRS1987

Cosmic ray intensity variations in the three-dimensional heliosphere

The study of cosmic ray intensity variations has been carried out with data from ground-based and balloon-borne equipment for the past fifty years or more; the International Geophysical Year in 1957 gave a further impetus to worldwide collaboration. The Pioneers and Voyagers during the past decade and a half, with their journeys farther into the heliosphere have transformed the discipline of what was known as the time variations of cosmic ray intensity into one of time and spatial variations. In particular, Voyager I has now reached a helio-latitude of about 30 deg. The study of galactic cosmic ray intensity from in-situ measurements by Pioneers and Voyagers traveling deep into the heliosphere in distance and latitude and over a solar cycle thus offers an understanding of the three-dimensional nature of the heliosphere, its boundary and the solar control of the same. The anticipated launch of Ulysses in 1989-90 will further advance understanding of the heliosphere. Indeed cosmic rays have turned out to be an effective tool in probing the heliosphere.

Venkatesan, D.↗
NASA NTRS1987

Automated acoustic intensity measurements and the effect of gear tooth profile on noise

Acoustic intensity measurements were made at NASA Lewis Research Center on a spur gear test apparatus. The measurements were obtained with the Robotic Acoustic Intensity Measurement System developed by Cleveland State University. This system provided dense spatial positioning, and was calibrated against a high quality acoustic intensity system. The measured gear noise compared gearsets having two different tooth profiles. The tests evaluated the sound field of the different gears for two speeds and three loads. The experimental results showed that gear tooth profile had a major effect on measured noise. Load and speed were found to have an effect on noise also.

Atherton, W. J.↗
NASA NTRS1988

Recombination line intensities for hydrogenic ions. II - Case B calculations for C VI, N VII and O VIII

The intensities of recombination lines formed in extended, optically thim, photoionized plasmas such as those found in PN, H II regions, and winds of certain hot stars are an important source of information on chemical abundances and can sometimes provide estimates of electron temperature. In this paper, the intensities of the recombination lines of C VI, N VII, and O VIII are calculated, accounting for both electron and heavy particle collisions and assuming case B of Baker and Menzel. The computational procedure is explained. The intensities of lines formed by transitions n(u) - n(l) are tabulated for n(u) of 50 or less, n(l) of 29 or less, at log N(e) = 4(1)13 and 10 values of electron temperature in the interval 10,000 K to 500,000 K.

Storey, P. J.↗
NASA NTRS1988

The anomalous C 4 intensity ratio in symbiotic stars

The C IV lambda lambda 1548.2,1550.8 resonance doublet in a symbiotic stars was shown to exhibit anomalous line intensity ratios in which I (lambda 1548.2)/I(lambda 1550.8) less than 1, or less than the optically-thick limit of unity. The R Aquarii-central HII region and RX Puppis exhibit this phenomena. The I(lambda 1548.2)/I(lambda 1550.8) ratio in RX Puppis is found to vary inversely with the total C IV line intensity, and with the FES-visual light, as the object declined over a 5 yr period following a brightening in UV and optical emission which peaked in 1982. This doublet intensity behavior could be explained by a wind which has a narrow velocity range of 600 approx. less than sup v wind approx. less than 1000 km/sec, or by the pumping of the Fe II (mul. 45.01) transition a sup 4 F sub 9/2 - y sup 4 H(o) sub 11/2 by C IV lambda 1548.2, which effectively scatters C IV photons into the Fe II spectrum in these objects.

Michalitsianos, A. G.↗
NASA NTRS1988

Effect of adhesive debond on stress-intensity factors in bonded composite panels

Stress-intensity factors are calculated for a cracked infinite sheet adhesively bonded to a stringer, and debonding of the adhesive layer is predicted. The stringer is modeled as a semiinfinite sheet. Adhesive nonlinearity is also included. Both the sheet and stringer are treated as homogeneous, orthotropic materials, a set of integral equations is formulated and solved to obtain the adhesive shear stresses and crack-tip stress-intensity factors. Adhesive debonding is predicted using a rupture criterion based on the combined adhesive stresses. A through-the-thickness crack is located in the infinite sheet perpendicular to the edge of the stringer. When the crack is not under the stringer, the debond extends along the edge of the stringer. When the crack tip is beneath the stringer, the debond extends to the crack tip, then along the edge of the stringer. Stress levels required for debond initiation decrease as the crack tip is moved beneath the stringer. With a nonlinear adhesive, the debond initiates at higher applied stress levels than in linear adhesive cases. Compared with the linear adhesive solution, modeling a nonlinear adhesive causes the stress-intensity factor to decrease when debonding is included.

Bigelow, C. A.↗
NASA NTRS1990

Intensity dependent spread processor and workstation

The Intensity Dependent Spread (IDS) is an adaptive algorithm which is modified according to the local intensity in the scene. (This results in a nonlinear process which cannot take advantage of rather nice linear transform methods.) The computation is similar to a neural net whereby intensity information is moving from each input pixel to a set of surrounding output pixels in a manner described by Cornsweet and Yellott. A prototype of a very large scale integration IDS processor is being developed and implemented in a workstation environment. The workstation consists of a SUN 3/260 and a DATACUBE pipeline processor. The IDS prototype is a board set which operates in the DATA CUBE processor. The SUN 3/260 performs control, background processing, IDS simulation and image display functions.

Westrom, George↗
NASA NTRS1990

Intensity modulation of HF heater-induced plasma lines

The Arecibo HF heater is normally composed of two separate sets of antenna array, transmitting waves vertically at the same frequency and polarization. However, when these two sets of antenna array radiate at slightly different frequencies, the intensities of HF heater-induced plasma lines (HFPLs) can be drastically modulated. In recent Duncan et al.'s (1989) experiments the 100 percent intensity modulation of HFPLs was seen to persist even when the secondary set of antenna array radiated at a few percent of the power transmitted by the primary set of antenna array. An explanation is offered, and it is shown that there exists a minimum power, Pmin, and if the secondary set of antenna array radiates at a power lower than Pmin, the 100-percent intensity modulation of HFPLs will not be observed. The functional dependence of Pmin on the difference frequency of the two sets of antenna array is also predicted for future experiments to corroborate.

Kuo, S. P.↗
NASA NTRS1990

Evaluation of finite-element models and stress-intensity factors for surface cracks emanating from stress concentrations

A re-evaluation of the 3-D finite-element models and methods used to analyze surface crack at stress concentrations is presented. Previous finite-element models used by Raju and Newman for surface and corner cracks at holes were shown to have ill-shaped elements at the intersection of the hole and crack boundaries. Improved models, without these ill-shaped elements, were developed for a surface crack at a circular hole and at a semi-circular edge notch. Stress-intensity factors were calculated by both the nodal-force and virtual-crack-closure methods. Comparisons made between the previously developed stress-intensity factor equations and the results from the improved models agreed well except for configurations with large notch-radii-to-plate-thickness ratios. Stress-intensity factors for a semi-elliptical surface crack located at the center of a semi-circular edge notch in a plate subjected to remote tensile loadings were calculated using the improved models.

Tan, P. W.↗
NASA NTRS1991

Variations in plasma wave intensity with distance along the electron foreshock boundary at Venus

Plasma waves are observed in the solar wind upstream of the Venus bow shock by the Pioneer Venus Orbiter. These wave signatures occur during periods when the interplanetary magnetic field through the spacecraft position intersects the bow shock, thereby placing the spacecraft in the foreshock region. Wave intensity is analyzed as a function of distance along the electron foreshock boundary. It is found that the peak wave intensity may increase along the foreshock boundary from the tangent point to a maximum value at several Venus radii, then decrease in intensity with subsequent increase in distance. These observations could be associated with the instability process: the instability of the distribution function increasing with distance from the tangent point to saturation at the peak. Thermalization of the beam for distances beyond this point could reduce the distribution function instability resulting in weaker wave signatures.

Crawford, G. K.↗
NASA NTRS1992

The optically thick C III spectrum. I - Term populations and multiplet intensities at lower optical depths

The C III spectrum is studied quantitatively under both optically thin and optically thick conditions, yielding term populations and line/multiplet intensities for column lengths from zero to 10 exp 18/sq cm. The roles of escape probabilities and line profiles in the calculation are discussed in some detail. It is shown that use of the fully integrated escape factor, rather than the more appropriate monodirectional escape probability, can lead to appreciable errors in calculated intensities. The results for populations and intensities make it possible to identify two unassigned features in the solar EUV spectrum of Vernazza and Reeves (1978) as C III multiplets, and to establish that an unidentified infrared solar feature at 8500.32 A, seen in both absorption (Fraunhofer) and emission (chromospheric) spectra, is the C III transition 2s3s(1S)-2s3p(1P). Voigt parameters for the C III lines and multiplets, obtained by a modified semiclassical method are tabulated. A new, unambiguous notation for the numerous line ratios present in a typical spectrum, which is argued to be an improvement over present arbitrary notations, is proposed and used.

Bhatia, A. K.↗
NASA NTRS1992

Fe II fluorescence and anomalous C IV doublet intensities in symbiotic novae

The variation of absolute intensities of Bowen-excited Fe II emission in the symbiotic stars RR Tel, RX Pup, and AG Peg is examined. The C IV doublet intensity ratios in RR Tel were not anomalous between 1979 and 1989, and the ratio had typical values within the optically thin range. The intensity of individual Fe II Bowen-excited lines is correlated with the C IV 1548.2 A flux, suggesting the presence of a foreground Fe II region in which fluorescent-excited material responds to flux variations of C IV 1548.2 A. In RX Pup the combined fluxes of Fe II Bowen-pumped lines can account for an appreciable fraction of the flux deficit in the C IV 1548.2 A line when the C IV doublet ratio is less than the optically thick limit of unity. The Fe II Bowen lines in RX Pup exhibit a velocity range from 0 to 80 km/s, where several strong Fe II emission lines correspond to deep absorption structure in the C IV 1548.2 A line profile. In AG Peg and C IV 1548.2 A flux deficit cannot be explained by Fe II fluorescent absorption alone when the C IV doublet ratio anomaly is at an extreme.

Michalitsianos, A. G.↗
NASA NTRS1992

The structure of intense vorticity in homogeneous isotropic turbulence

The structure of the intense vorticity regions is studied in numerically simulated homogeneous, isotropic, equilibrium turbulent flow fields at four different Reynolds numbers in the range Re(sub lambda) = 36-171. In accordance with previous investigators, this vorticity is found to be organized in coherent, cylindrical or ribbon-like, vortices ('worms'). A statistical study suggests that they are just especially intense features of the background, O(omega'), vorticity. Their radii scale with the Kolmogorov microscale and their lengths with the integral scale of the flow. An interesting observation is that the Reynolds number based on the circulation of the intense vortices, gamma/nu, increases monotonically with Re(sub lambda), raising the question of the stability of the structures in the limit of Re(sub lambda) approaching infinity. One and two-dimensional statistics of vorticity and strain are presented; they are non-gaussian, and the behavior of their tails depends strongly on the Reynolds number. There is no evidence of convergence to a limiting distribution in our range of Re(sub lambda), even though the energy spectra and the energy dissipation rate show good asymptotic properties in the higher Reynolds number cases. Evidence is presented to show that worms are natural features of the flow and that they do not depend on the particular forcing scheme.

Jimenez, J.↗