Search NASA⌕ Search

SEARCH · Search NASA

Results for “interface diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Stability Analysis of Coupled Advection-Diffusion Models with Bulk Interface Condition

Numerical stability is of critical importance in general circulation models because it affects the design of algorithms, time to solution, and computational costs associated with the simulations, which are very expensive in practice. In this paper we extend the stability analysis for ocean-atmosphere coupling proposed in [Zhang et al., J. Sci. Comput. 84, 44(2020)] to a more realistic model that includes horizontal advection. We analyze various time-stepping strategies. We find that advection has a stabilizing effect in scenarios common to climate models when bulk interface condition and explicit flux coupling are used. We also show that our method can be used to study the stability impact of advection for other interface conditions such as Dirichlet-Neumann conditions.

97 MATHEMATICS AND COMPUTING↗

Continuum model for hydrogen pickup in zirconium alloys of LWR fuel cladding

A continuum model for calculating the time-dependent hydrogen pickup fractions in various Zirconium alloys under steam and pressured water oxidation has been developed in this paper. Using only one fitting parameter, the effective hydrogen gas partial pressure at the oxide surface, a qualitative agreement is obtained between the predicted and previously measured hydrogen pickup fractions. The calculation results therefore demonstrate that H diffusion through the dense oxide layer plays an important role in the hydrogen pickup process. Finally, the limitations and possible improvement of the model are also discussed.

36 MATERIALS SCIENCE↗

Accelerated molecular dynamics and equation-free methods for simulating diffusion in solids.

Many of the most important and hardest-to-solve problems related to the synthesis, performance, and aging of materials involve diffusion through the material or along surfaces and interfaces. These diffusion processes are driven by motions at the atomic scale, but traditional atomistic simulation methods such as molecular dynamics are limited to very short timescales on the order of the atomic vibration period (less than a picosecond), while macroscale diffusion takes place over timescales many orders of magnitude larger. We have completed an LDRD project with the goal of developing and implementing new simulation tools to overcome this timescale problem. In particular, we have focused on two main classes of methods: accelerated molecular dynamics methods that seek to extend the timescale attainable in atomistic simulations, and so-called 'equation-free' methods that combine a fine scale atomistic description of a system with a slower, coarse scale description in order to project the system forward over long times.

36 MATERIALS SCIENCE↗

Enhanced diffusion bonding of alloy 617 using electric field-assisted sintering

The development of compact heat exchangers (CHXs) has gained increasing interest in many industries owing to their high thermal efficiency and reduced size. Diffusion bonding (DB) is an advantageous technique for fabricating CHXs. Alloy 617 is a candidate for manufacturing CHXs for high-temperature advanced nuclear reactors due to its elevated-temperature properties. Previous endeavors in DB of Alloy 617 were conducted by hot pressing (HP), which reported precipitates at the diffusion-bond interface, limited grain boundary (GB) migration, and significantly reduced high-temperature mechanical properties. To overcome these challenges, this study investigated DB of Alloy 617 using electric field-assisted sintering (EFAS). Stacks composed of three sheets were bonded with EFAS using different temperatures, pressures, and hold times. DB using HP as the zero-current analog of EFAS was also performed for comparison. The result shows that Cr- and Mo-rich precipitates were formed at the interface of the hot-pressed samples. The electric current and temperature in EFAS play a significant role in precipitation and GB migration. The electric current coupled with correct temperatures can effectively prevent precipitate formation at the interface and achieve excellent GB migration. Nanoscale Al-rich oxide was formed at the interface of the samples made by both HP and EFAS, but grain boundaries can ignore the nanoscale Al-oxide and migrate across the interface. The temperature, pressure, and hold time also affected diffusion. The temperature is a prerequisite for a successful GB migration, and GB migration can be enhanced by increasing pressure and hold time.

36 MATERIALS SCIENCE↗

Coupled Interfacial and Bulk Kinetics Govern the Timescales of Multiphase Ozonolysis Reactions

Chemical transformations in aerosols impact the lifetime of particle phase species, the fate of atmospheric pollutants, and both climate- and health-relevant aerosol properties. Timescales for multiphase reactions of ozone in atmospheric aqueous phases are governed by coupled kinetic processes between the gas phase, the particle interface, and its bulk, which respond dynamically to reactive consumption of O 3 . However, models of atmospheric aerosol reactivity often do not account for the coupled nature of multiphase processes. Herein, to examine these dynamics, we use new and prior experimental observations of aqueous droplet reaction kinetics, including three systems with a range of surface affinities and ozonolysis rate coefficients ( trans -aconitic acid (C 6 H 6 O 6 ), maleic acid (C 4 H 4 O 4 ), and sodium nitrite (NaNO 2 )). Using literature rate coefficients and thermodynamic properties, we constrain a simple two-compartment stochastic kinetic model which resolves the interface from the particle bulk and represents O 3 partitioning, diffusion, and reaction as a coupled kinetic system. Our kinetic model accurately predicts decay kinetics across all three systems, demonstrating that both the thermodynamic properties of O 3 and the coupled kinetic and diffusion processes are key to making accurate predictions. An enhanced concentration of adsorbed O 3 , compared to gas and bulk phases is rapidly maintained and remains constant even as O 3 is consumed by reaction. Multiphase systems dynamically seek to achieve equilibrium in response to reactive O 3 loss, but this is hampered at solute concentrations relevant to aqueous aerosol by the rate of O 3 arrival in the bulk by diffusion. As a result, bulk-phase O 3 becomes depleted from its Henry's law solubility. This bulk-phase O 3 depletion limits reaction timescales for relatively slow-reacting organic solutes with low interfacial affinity (i.e., trans-aconitic and maleic acids, with k rxn ≈ 10 3 -10 4 M -1 s -1 ), which is in contrast to fast-reacting solutes with higher surface affinity (i.e., nitrite, with k rxn ≈ 10 5 M -1 s -1 ) where surface reactions strongly impact the observed decay kinetics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Atomic-scale chemical quantification of oxide interfaces using energy-dispersive X-ray spectroscopy

Atomic-scale quantification of chemical composition across oxide interfaces is important for understanding physical properties of epitaxial oxide nanostructures. Energy-dispersive X-ray spectroscopy (EDS) in an aberration-corrected scanning transmission electron microscope was used to quantify chemical composition across the interface of ferromagnetic La{sub 0.7}Sr{sub 0.3}MnO{sub 3} and antiferromagnetic BiFeO{sub 3} quantum structure. This research demonstrates that chemical composition at atomic columns can be quantified by Gaussian peak-fitting of EDS compositional profiles across the interface. Cation diffusion was observed at both A- and B-sublattice sites; and asymmetric chemical profiles exist across the interface, consistent with the previous studies.

36 MATERIALS SCIENCE↗

Enhancement of perpendicular magnetic anisotropy and spin-orbit torque in Ta/Pt/Co/Ta multi-layered heterostructures through interfacial diffusion

Heavy metal/ferromagnetic metal bi-layered structures that exhibit both strong perpendicular magnetic anisotropy (PMA) and large spin-orbit torque (SOT) efficiency have high potential in high-density, low-power memory, and logic device applications. Here, we report the enhancement of PMA and SOT in Ta/Pt/Co/Ta multi-layered heterostructures through interfacial diffusion. The structures can exhibit PMA fields of 9100 Oe at 300 K and 14100 Oe at 10 K and an effective spin Hall angle (SHA) of 0.61 ± 0.03 at 300 K. These values are larger than the corresponding values reported previously for similar heterostructures. The current-induced magnetization switching was demonstrated. The critical switching current density is on the order of 10 6 A/cm 2 , and the corresponding switching efficiency is higher than that reported for similar structures. X-ray absorption spectroscopy and high-angle annular dark-field scanning transmission electron microscopy analyses suggest a strong correlation between the observed PMA and SOT enhancement and the interfacial diffusion during the sputtering growth of the samples. It is very likely that the interfacial diffusion gives rise to enhanced spin-orbit coupling at the interface, while the latter results in enhancement in the PMA, SHA, and switching efficiency in the structure.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Diffusion bonding of 410 stainless steel to copper using a nickel interlayer

In the present work, plates of stainless steel (grade 410) were joined to copper ones through a diffusion bonding process using a nickel interlayer at a temperature range of 800-950 deg. C. The bonding was performed through pressing the specimens under a 12-MPa compression load and a vacuum of 10{sup -4} torr for 60 min. The results indicated the formation of distinct diffusion zones at both Cu/Ni and Ni/SS interfaces during the diffusion bonding process. The thickness of the reaction layer in both interfaces was increased by raising the processing temperature. The phase constitutions and their related microstructure at the Cu/Ni and Ni/SS diffusion bonding interfaces were studied using optical microscopy, scanning electron microscopy, X-ray diffraction and elemental analyses through energy dispersive spectrometry. The resulted penetration profiles were examined using a calibrated electron probe micro-analyzer. The diffusion transition regions near the Cu/Ni and Ni/SS interfaces consist of a complete solid solution zone and of various phases based on (Fe, Ni), (Fe, Cr, Ni) and (Fe, Cr) chemical systems, respectively. The diffusion-bonded joint processed at 900 deg. C showed the maximum shear strength of about 145 MPa. The maximum hardness was obtained at the SS-Ni interface with a value of about 432 HV.

36 MATERIALS SCIENCE↗

Non-Diffusive Volume Advection with A High Order Interface Reconstruction Method

We show that non-diffusive volume advection in two-dimensions is achieved with several benchmark problems using a newly developed high-order volume of fluids (VOF) interface reconstruction method. (1) A new VOF interface reconstruction method using circular/corner facets (linear facets are a degenerate case of arcs). We create a circular interface facet in each mixed zone by matching neighbor volume with a hybrid Newton’s-bisection method and the local solution is final. In the general case, the new VOF interface reconstruction has 3rd order accuracy and can be easily made seamless. The new method addresses intrinsic issues with Young’s method such as gaps between interface facets in the case of a curved interface, and inability to define curvature nor identify corners. (2) A non-diffusive volume advection scheme. In an ALE advection step, a well-defined interface can be carried over through a Lagrange step and used to compute volume distribution into a relaxed mesh. Then, an interface reconstruction step is performed to redefine the interface in the relaxed mesh. We must point out that the interface carried over is also a solution of interface reconstruction because all the volume fractions in the relaxed mesh are naturally matched. We provide an interface tracking method compatible with our reconstruction scheme, where it is granted to use the prior info as an initial guess to capture sub-mesh resolution features. As a result, we are able to treat multiple facets inside a single mixed cell and obtain highly accurate, non-diffusive solution for advection problems with rather coarse meshes. We show our solutions for two-dimensional incompressible flows with two materials with a) the X + O diagonal translation; b) the Zalesak rotational test; and c) the single vortex spiral test.

97 MATHEMATICS AND COMPUTING↗

Mechanical rolling formation of interpenetrated lithium metal/lithium tin alloy foil for ultrahigh-rate battery anode

To achieve good rate capability of lithium metal anodes for high-energy-density batteries, one fundamental challenge is the slow lithium diffusion at the interface. Here we report an interpenetrated, three-dimensional lithium metal/lithium tin alloy nanocomposite foil realized by a simple calendering and folding process of lithium and tin foils, and spontaneous alloying reactions. The strong affinity between the metallic lithium and lithium tin alloy as mixed electronic and ionic conducting networks, and their abundant interfaces enable ultrafast charger diffusion across the entire electrode. Furthermore, we demonstrate that a lithium/lithium tin alloy foil electrode sustains stable lithium stripping/plating under 30 mA cm -2 and 5 mAh cm -2 with a very low overpotential of 20 mV for 200 cycles in a commercial carbonate electrolyte. Cycled under 6 C (6.6 mA cm -2 ), a 1.0 mAh cm -2 LiNi 0.6 Co 0.2 Mn 0.2 O 2 electrode maintains a substantial 74% of its capacity by pairing with such anode.

25 ENERGY STORAGE↗

Structural analysis of a (Pt/Co){sub 3}/IrMn multilayer: Investigation of sub-nanometric layers by tomographic atom probe

The structure of a Ta{sub 3nm}/[(Pt{sub 2nm}/Co{sub 0.4nm}){sub 3}/IrMn{sub 7nm}]{sub 7}/Pt{sub 10nm} multilayer exhibiting perpendicular exchange bias has been investigated by x-ray reflectometry and laser-assisted tomographic atom probe (LATAP). A strong intermixing at the Co/IrMn interface is pointed out by x-ray reflectometry, this interface being more diffuse than the IrMn/Pt interface. A direct observation of this intermixing at the atomic scale is obtained thanks to the LATAP in real space. The three-dimensional reconstructions reveal the atomic planes in the Pt layers and the Pt-Co intermixing in the (Pt/Co){sub 3} multilayer. The analysis of the concentration profiles allows to determine the chemical composition of the Co subnanometric layers; thus providing for the first time an accurate structural characterization of such layers leading to an estimation of their thickness, roughness, atomic concentration and width of their interfaces.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Tribological characteristics of gold films deposited on metals by ion plating and vapor deposition

The graded interface between an ion-plated film and a substrate is discussed as well as the friction and wear properties of ion-plated gold. X-ray photoelectron spectroscopy (XPS) depth profiling and microhardness depth profiling were used to investigate the interface. The friction and wear properties of ion-plated and vapor-deposited gold films were studied both in an ultra high vacuum system to maximize adhesion and in oil to minimize adhesion. The results indicate that the solubility of gold on the substrate material controls the depth of the graded interface. Thermal diffusion and chemical diffusion mechanisms are thought to be involved in the formation of the gold-nickel interface. In iron-gold graded interfaces the gold was primarily dispersed in the iron and thus formed a physically bonded interface. The hardness of the gold film was influenced by its depth and was also related to the composition gradient between the gold and the substrate. The graded nickel-gold interface exhibited the highest hardness because of an alloy hardening effect. The effects of film thickness on adhesion and friction were established.

Miyoshi, K.↗

Tribological characteristics of gold films deposited on metals by ion plating and vapor deposition

The graded interface between an ion-plated film and a substrate is discussed as well as the friction and wear properties of ion-plated gold. X-ray photoelectron spectroscopy (XPS) depth profiling and microhardness depth profiling were used to investigate the interface. The friction and wear properties of ion-plated and vapor-deposited gold films were studied both in an ultra high vacuum system to maximize adhesion and in oil to minimize adhesion. The results indicate that the solubility of gold on the substrate material controls the depth of the graded interface. Thermal diffusion and chemical diffusion mechanisms are thought to be involved in the formation of the gold-nickel interface. In iron-gold graded interfaces the gold was primarily dispersed in the iron and thus formed a physically bonded interface. The hardness of the gold film was influenced by its depth and was also related to the composition gradient between the gold and the substrate. The graded nickel-gold interface exhibited the highest hardness because of an alloy hardening effect. The effects of film thickness on adhesion and friction were established.

Miyoshi, K.↗

A variational treatment of material configurations with application to interface motion and microstructural evolution

We present a unified variational treatment of evolving configurations in crystalline solids with microstructure. The crux of our treatment lies in the introduction of a vector configurational field. This field lies in the material, or configurational, manifold, in contrast with the traditional displacement field, which we regard as lying in the spatial manifold. We identify two distinct cases which describe (a) problems in which the configurational field's evolution is localized to a mathematically sharp interface, and (b) those in which the configurational field's evolution can extend throughout the volume. The first case is suitable for describing incoherent phase interfaces in polycrystalline solids, and the latter is useful for describing smooth changes in crystal structure and naturally incorporates coherent (diffuse) phase interfaces. These descriptions also lead to parameterizations of the free energies for the two cases, from which variational treatments can be developed and equilibrium conditions obtained. For sharp interfaces that are out-of-equilibrium, the second law of thermodynamics furnishes restrictions on the kinetic law for the interface velocity. The class of problems in which the material undergoes configurational changes between distinct, stable crystal structures are characterized by free energy density functions that are non-convex with respect to configurational strain. For physically meaningful solutions and mathematical well-posedness, it becomes necessary to incorporate interfacial energy. This we have done by introducing a configurational strain gradient dependence in the free energy density function following ideas laid out by Toupin (Arch. Rat. Mech. Anal., 11, 1962, 385-414). The variational treatment leads to a system of partial differential equations governing the configuration that is coupled with the traditional equations of nonlinear elasticity. The coupled system of equations governs the configurational change in crystal structure, and elastic deformation driven by elastic, Eshelbian, and configurational stresses. As a result, numerical examples are presented to demonstrate interface motion as well as evolving microstructures of crystal structures.

36 MATERIALS SCIENCE↗