Search NASA⌕ Search

SEARCH · Search NASA

Results for “interface kinetics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Structure-Dependent Lithium Metal Reactivity of Lithium Lanthanum Titanium Oxide Solid Electrolytes

Ongoing efforts to design stable, ionically conductive solid-state electrolytes (SSEs) for next-generation solid-state batteries make it clear that both long and short-range structural order strongly influence materials performance. However, clear structure-property relationships are generally lacking, making it difficult to develop design rules for improving the (electro) chemical stability of SSEs. Here, in this work, we synthesize epitaxial, single-crystal lithium lanthanum titanium oxide (LLTO) films and demonstrate that the kinetics of Ti 4+ reduction and lithium intercalation depend sensitively on the crystal orientation, with electrochemical stability increasing as LLTO (001) < (110) similar to (112) < (100). However, thermodynamic stability is ultimately unaffected-all orientations fully reduce after extended contact with Li metal. In contrast, amorphous LLTO films exhibit minimal, self-limiting reactivity that results in an interface that is stable to extended contact with Li metal. The results demonstrate the potential to engineer crystal lattice strain and long-range order to differentially tune the stability of the solid electrolyte toward reactive lithium metal and cathode materials, suggesting strategies for enabling the wider deployment of LLTO and other ionically conductive ceramic films in advanced energy storage technologies

Ketter, Benjamin [Argonne National Laboratory (ANL↗
DOE OSTI2025

Investigation of kinetic inductance and microwave loss in thin-film TaC x N 1−x superconducting resonators

The promise of tantalum for realizing superconducting quantum devices has generated interest in its compound films, particularly nitrides. Among these, cubic-phase tantalum carbonitride (TaC x N 1−x ) offers reduced susceptibility to oxidation and a high critical temperature, yet its microwave properties remain largely unexplored. Here, in this study, we investigate plasma-enhanced atomic layer deposition of cubic-phase TaC x N 1−x thin films for superconducting microwave circuits. Structural and transport measurements reveal nanocrystalline morphology with sub-10 nm grains and superconductivity in the dirty limit. Coplanar waveguide resonators exhibit moderately high kinetic inductance (16.8 pH/sq for 30 nm films) with potential for enhancement through dimensional scaling. The films also support high internal quality factors exceeding 10 5 at 50 mK in the single-photon regime, comparable to granular aluminum. Loss analysis identifies the two-level systems as the dominant limiting mechanism, with potential for further reduction through interface engineering. These results establish atomic layer deposited TaC x N 1−x as a promising material for scalable, low-loss, high-inductance superconducting circuits.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Heterobinuclear Molecular Precursors Direct the Formation of Supported Subnanometer Cu–M Clusters with Tunable Catalytic Behavior

Subnanometer bimetallic clusters hold great promise for catalytic applications due to their unique electronic properties and high surface-to-volume ratios. However, precise control over their composition and size remains a major challenge, particularly for immiscible metal pairs. Here, we report a surface-anchored molecular approach for synthesizing ∼0.7–0.8 nm Cu–M (M = Ru, Mo, W, Fe) bimetallic clusters on mesoporous silica supports, using heterobinuclear N-heterocyclic carbene (NHC)-based complexes as precursors. The NHC ligand functionalized with an alkoxysilane anchor enables robust grafting to the silica interface. Controlled calcination and reduction lead to subnanometer clusters with tunable composition, dictated by the metal–metal bond stability in the precursor. In situ transmission electron microscopy reveals cluster growth proceeds via sintering of adjacent surface-bound units, while elevated temperatures above 300 °C triggering diffusion and phase separation. Catalytic testing in ethylene hydrogenation demonstrates composition-dependent activity and kinetics, with CuRu and CuW clusters exhibiting lower apparent activation energy barriers compared with monometallic Cu nanoparticles. This study establishes a generalizable strategy for the interfacial synthesis of alloyed clusters from molecular precursors and provides mechanistic insight into how precursor design governs nanostructure formation and catalytic behavior.

N-heterocyclic carbene↗
DOE OSTI2025

Multicationic interactions mitigating lattice strain in sodium layered cathodes

Transition-metal (TM) layered oxides have emerged as the primary cathode choice for sodium-ion batteries (SIBs) due to their high energy density and sustainable chemistry using non-critical elements. However, their anisotropic lattice strain and stress accumulation during (de)sodiation lead to severe structural degradation, yet an intrinsic strain-depressant approach remains elusive. Herein, we propose entropy regulation with zero Li/Co usage to mitigate harmful lattice displacements and enhance the electrochemical performance of sodium layered cathodes. Our findings demonstrate that high entropy design effectively inhibits TMO 6 octahedra distortions upon cycling, as evidenced by hard X-ray absorption spectroscopy, greatly reducing near-surface structural deconstruction and interface side reactions. Furthermore, multicationic interactions driven by configurational entropy thermodynamically mitigate the formation of oxygen defects and strengthen ligand-to-metal coordination. The complementarity inherent in charge compensation within complex systems is unveiled and the restrained lattice parameters deviations without interior volume residuals are successfully achieved. As a result, the multicationic cathode exhibits improved cycling stability and Na + diffusion kinetics in both half and full cells. The cathode chemistries outlined here broaden the prospects for lattice engineering to alleviate bulk fatigue and open up the possibility to develop an economically viable layered oxides with long durability.

Wang, Haoji [Central South University, Changsha (C↗
DOE OSTI2026

Low-Pressure Diffusion Bonding of Vanadium to Commercially Pure Titanium and Ti-6Al-4V

Modern technology increasingly requires components to be made from specific high-performance materials. To support complex multi-metal structures, a variety of techniques are required to join dissimilar metal parts with precise shapes. This study evaluates vacuum diffusion bonding as a method for joining titanium and vanadium, focusing on both pure titanium and the common alloy Ti-6Al-4V. We employ modest pressure provided by a weight and simple surface preparation to simulate the most commercially applicable process. Here, we show that Ti-6Al-4V alloy bonds readily to V, forming a continuous, clearly defined interdiffusion layer with predictable kinetics. Conversely, commercially pure Ti forms a crack-prone bond with V that fails to improve at higher bonding temperatures or longer times. We attribute this failure to the concentration of stress caused by the ß-to-α phase transformation in Ti. The contrasting bonding efficacy between pure Ti and the alloy provides insight into the crystallographic interactions that occur at the interface during bonding and cooling. These results provide surprising insight into a new method for bonding Ti alloys to V and possibly other metals that share the body-centered cubic crystal structure.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Intermetallic phase formation in Al-Si-Zr alloys during hot isostatic pressing revealed by experiments and molecular dynamics

Understanding phase transformations at alloy interfaces is critical for the design of advanced structural materials. Here, in this study, we investigate the formation mechanisms of the Al 2 SiZr intermetallic phase in the Al-Si-Zr system under hot isostatic pressing (HIP) using molecular dynamics (MD) simulations and thermodynamic analysis. A unique aspect of our approach in MD involves the replacement of a disordered Al 2 SiZr stoichiometry with an ordered phase at the Al-Zr interface once HIP results in the desired Al 2 SiZr stoichiometry, allowing us to compute the total energetic cost of transformation by accounting for both formation energies and diffusion barriers. Diffusion coefficients and activation energies, extracted across a range of temperatures, reveal that HIP substantially enhances atomic mobility, creating favorable stoichiometry for phase evolution. Our results show that Al 2 SiZr phase formation is kinetically unfavorable at lower temperatures but becomes feasible when the thermodynamic driving energy surpass a critical energy threshold.

Roy, Ankit [Pacific Northwest National Laboratory ↗
DOE OSTI2024

Does H 2 Temperature‐Programmed Reduction Always Probe Solid‐State Redox Chemistry? The Case of Pt/CeO 2

Abstract Redox reactions on the surface of transition metal oxides are of broad interest in thermo, photo, and electrocatalysis. H 2 temperature‐programmed reduction (H 2 ‐TPR) is commonly used to probe oxide reducibility by measuring the rate of H 2 consumption during temperature ramps, assuming that this rate is controlled by oxide reduction. However, oxide reduction involves several elementary steps, such as H 2 dissociation and H‐spillover, before surface reduction and H 2 O formation occur. In this study, we evaluated the kinetics of H 2 consumption over CeO 2 and Pt/CeO 2 with varying Pt loadings and structures to identify the elementary steps probed by H 2 ‐TPR. Literature often attributes changes in H 2 ‐TPR characteristics with Pt addition to increased CeO 2 reducibility. However, our analysis revealed that the H 2 consumption rate is measurement of the rate of H‐spillover at Pt‐CeO 2 interfaces and is determined by the concentration of Pt species on Pt nanoclusters that dissociate H 2 . Therefore, lower temperature H 2 consumption observed with Pt addition does not indicate higher CeO 2 reducibility. Measurements on samples with mixtures of Pt single‐atoms and nanoclusters demonstrated that H 2 ‐TPR can effectively quantify dilute Pt nanocluster concentrations, suggesting caution in directly linking H 2 ‐TPR characteristics to oxide reducibility while highlighting alternative material insights that can be gleaned.

Lee, Jaeha↗
DOE OSTI2025

Approach to Evaluating Reorganization Energies of Interfacial Electrochemical Reactions

Reaction rate coefficients for electron-transfer processes at the electrode–electrolyte interface are commonly estimated by using the Butler–Volmer equation, but their values are inaccurate beyond a few tenths of volts of overpotential. The Marcus–Hush–Chidsey (MHC) formalism yields correct asymptotic behavior of the rate coefficients vs applied overpotential but has complex dependencies on the redox system’s intrinsic parameters, which can be difficult to model or measure. In this work, we bridge the two kinetics formalisms to estimate the reorganization energy, one of the important parameters for the MHC formalism, and investigate its dependence on other intrinsic parameters such as activation barriers, electronic coupling strength, and the density of states of the electrode surface. We examine the sensitivity of the reorganization energy to these parameters, establish some general relationships for accurately predicting rate coefficients using the MHC formalism over a wide range of applied overpotentials, and compare this approach to calculating MHC rate constants with other empirical approaches for the mechanisms of CO 2 reduction on different metal electrode surfaces.

Butler−Volmer↗
DOE OSTI2024

Morphological Evolution and Dealloying During Corrosion of Ni20Cr (wt.%) in Molten FLiNaK Salts

The dealloying corrosion behavior of the FCC Ni20Cr (wt%) in molten LiF-NaF-KF (FLiNaK) salts at 600 °C under varying applied potentials was investigated. Using in-operando electrochemical techniques and a multi-modal suite of characterization methods, we connect electrochemical potential, thermodynamic stability, and electro-dissolution kinetics to the corrosion morphologies. Notably, under certain potential regimes, a micron-scale bicontinuous structure, characterized by a network of interconnected pores and ligaments riched with the composition of the more noble (MN) element, becomes prominent. At other potentials both MN and less noble (LN) elements dealloy but at different rates. The dealloying process consists of lattice and grain boundary diffusion of Cr to the metal/salt interface, interphase Cr oxidation, accompanied by surface diffusion of Ni to form interconnected ligaments. At higher potentials, the bicontinuous porous structure undergoes further surface coarsening. Concurrently, Cr(II), Cr(III), and Ni(II) begin to dissolve, with the dissolution of Ni occurring at a significantly slower rate. When solid-state transport of Cr is exceeded by the interfacial rates, dealloying depths are limited.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Does H 2 Temperature–Programmed Reduction Always Probe Solid–State Redox Chemistry? The Case of Pt/CeO 2

Redox reactions on the surface of transition metal oxides are of broad interest in thermo, photo, and electrocatalysis. H 2 temperature-programmed reduction (H 2 -TPR) is commonly used to probe oxide reducibility by measuring the rate of H 2 consumption during temperature ramps, assuming that this rate is controlled by oxide reduction. However, oxide reduction involves several elementary steps, such as H 2 dissociation and H-spillover, before surface reduction and H 2 O formation occur. In this study, we evaluated the kinetics of H 2 consumption over CeO 2 and Pt/CeO 2 with varying Pt loadings and structures to identify the elementary steps probed by H 2 -TPR. Literature often attributes changes in H 2 -TPR characteristics with Pt addition to increased CeO 2 reducibility. However, our analysis revealed that the H 2 consumption rate is measurement of the rate of H-spillover at Pt-CeO 2 interfaces and is determined by the concentration of Pt species on Pt nanoclusters that dissociate H 2 . Furthermore, lower temperature H 2 consumption observed with Pt addition does not indicate higher CeO 2 reducibility. Measurements on samples with mixtures of Pt single-atoms and nanoclusters demonstrated that H 2 -TPR can effectively quantify dilute Pt nanocluster concentrations, suggesting caution in directly linking H 2 -TPR characteristics to oxide reducibility while highlighting alternative material insights that can be gleaned.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

New Engineering Concepts to High Energy Density Li-S Batteries

Li-S batteries (LSBs) with energy densities > 500 Wh/kg @ C/5 and >1000 cycles, cycle life operating over wide temperatures has been identified to be critical for meeting the global energy demands. Progress is however, very much limited due to several major hurdles related to the following: (a) poor Li' reaction kinetics (conductivity/diffusivity) enabling full reversible S conversion to Li2S, (b) inferior electron (e) conductivity, specific capacity and cycle life due to electrolyte soluble species of polysulfides (PSs) formed with the reaction of Li ions with sulfur migrating to anode, (c) unstable solid electrolyte interphase (SEI) formation and finally, (d) dendrites that are formed on the Li metal anode severely limiting the cycle life due to polarization at the solid/liquid interfaces causing safety, inferior capacity, energy density, rate, and cycle life issues. Creation of a fully functional economical ≤$80/kWh, high energy density LSBs is vital for enabling its widespread commercial deployment and use in current and next generation electric vehicles.

25 ENERGY STORAGE↗
DOE OSTI2024

Epitaxial heterointerfacial electron bridge synchronizes oxygen evolution activity and stability on a layered double hydroxide surface

Scalable green hydrogen production via electrocatalytic water splitting is largely restricted by the insufficient activity and stability of oxygen evolution reaction (OER) catalysts at the anode. As a class of the most active OER catalysts in alkaline electrolyzers, the application of layered double hydroxides (LDHs) remains a main challenge owing to the unstable lattice oxygen dissolution due to the dominant lattice oxygen-involving OER mechanism during long-term operation. Herein, we found that using an epitaxial hetero-interfacing nickel hydroxide (namely Ni(OH) 2 ) as an electron bridge between an active FeCo LDH and Ni foam support to form an LDH*/NFO catalyst, the electronic storage capacity around the Fermi level (-0.5 to +0.5 eV, e-D FE ) sharply increases from 0.93 per cell to 1.51 per cell. Subsequently, we demonstrate that this high e-D FE enables ceaseless and fast power injection into the kinetic process of intermediate species conversion and inhibits lattice oxygen dissolution in the active FeCo LDH. Consequently, it demonstrated a low OER overpotential of 246 mV at a current density of 100 mA cm -2 and ultrahigh stability for up to 3500 hours with an ultraslow overpotential increase rate of 9.4 × 10 -3 mV h -1 . Therefore, we developed an epitaxial hetero-interfacial electron bridging strategy to synchronize the activity and stability of available catalysts for scalable green hydrogen production via electrocatalytic water splitting.

25 ENERGY STORAGE↗
DOE OSTI2025

Nanoscale interfacial melting enables bonding during high velocity microparticle impacts

Melting during high-velocity particle impact has been understood to be typically detrimental to bonding by lowering the strength at the interface and promoting rebound before solidification can occur. Here we establish a possible remedy to this challenge: by dramatically restricting the volume of molten material, its resolidification is accelerated, effectively forming a nanoscale, braze-type joint during impact. In-situ single particle impact imaging is combined with post-mortem structural and chemical analyses to reveal a regime where adhesion is governed not by extensive plastic deformation, but by the kinetics of melt layer resolidification. Furthermore, these findings redefine the role of melting in impact-based processes, establishing transient melting and rapid solidification as a viable strategy for engineering successful adhesion events.

Additive manufacturing↗
DOE OSTI2025

Thermodynamics and kinetics of core-shell versus appendage co-precipitation morphologies

What determines precipitate morphologies in co-precipitating alloy systems? We focus on alloys of two precipitating phases, with the fast-precipitating phase acting as heterogeneous nucleation sites for a second phase manifesting slower kinetics. Kinetic lattice Monte Carlo simulations show that the interplay between interfacial and ordering energies, plus active diffusion paths, strongly affect the selection of core-shell verses appendage morphologies. We study a FeCuMnNiSi alloy using the combination of atom probe tomography and simulations, and show that the ordering energy reduction of the MnNiSi phase heterogeneously nucleated on a pre-existing copper-rich precipitate exceeds the energy penalty of a predominantly Fe/Cu interface, leading to initial appendage, rather than core-shell, formation. Diffusion of Mn, Ni and Si around and through the Cu core towards the ordered phase results in subsequent appendage growth. We further show that in cases with higher primary precipitate interface energies and/or suppressed ordering, the coreshell morphology is favored.

Shu, Shipeng↗
DOE OSTI2024

OpenFacadeControl: enabling integration of automated facades with other building systems

Automated facades are, for the most part, still considered as separate from other building systems throughout the design, installation, commissioning, operation, and maintenance cycle. This takes place despite the fact that their energy and comfort performance are deeply interlinked with the operation of lighting and HVAC systems. Over the last two decades, research has shown that there are significant advantages from operating facades as an integrated system with the rest of the building. Nevertheless, significant barriers prevent this type of integration becoming more common. One of them is the lack of a platform that is inexpensive to implement and that easily allows the practical implementation of integrated control algorithms across fenestration and other building systems, using a variety of communications protocols. This is particularly challenging when automated facades are installed in existing buildings, where interaction with legacy building systems that were installed over the past lifetime of the building can require a high degree of interoperability. OpenFacadeControl (OFC) is an open-source controls framework aimed at unified control of facades and other building systems, including the sharing of third-party sensor information. Through leveraging the Volttron controls platform, it allows the integration of systems and sensors that are manufactured by different companies and that use different communications protocols into an ensemble that functions as a single system. OFC is designed to enable integrated control algorithms of varying degrees of complexity, ranging from simple, heuristic controls to more sophisticated approaches like model-predictive control. Use of a research version to test advanced lighting and shading strategies in a full-scale experimental testbed has demonstrated the ease of deploying advanced control solutions using OpenFacadeControl. This paper presents the structure of OpenFacadeControl and a demonstration case showing the use of OFC in laboratory tests of advanced lighting and fenestration controls that coordinated motorized shades communicating via the BACnet building communications standard and lights communicating via internet-protocol-based application programming interface (API), based on the readings of a shared light level sensor communicating via a different API.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2026

Spatially Mapping the CO 2 Alkaline Sorbent Diffuse Microenvironment Using Operando Raman Spectroscopy

When designing a chemical process, the local balance of transport and kinetics, collectively referred to as the diffuse microenvironment, plays a critical role in performance but is difficult to directly observe. This work demonstrates a method of two-dimensional spatial chemical mapping of the diffuse microenvironment in the context of alkali metal hydroxide direct air capture of carbon dioxide using a custom operando gas-absorption flow cell along with confocal Raman spectroscopy. Notably, we observe the concentration boundary layer near the gas–liquid interface and elucidate the interplay of carbonate and bicarbonate ions within it while inferring local hydroxide depletion through continuum modeling. These first of their kind observations provide a technique to compare the performance of direct air capture solvents based on diffuse microenvironment dynamics while also providing metrics important for air contactor design such as boundary layer thickness. Overall, this work showcases a new experimental platform to study interfacial diffuse microenvironments in and outside of the field of direct air capture of carbon dioxide.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Melting temperature of bismuth to 55 GPa using synchrotron X-ray phase contrast imaging

The melting temperature of elemental bismuth under high pressure has been measured to 55 GPa using synchrotron X-ray phase-contrast imaging in the laser-heated diamond anvil cell. Imaging of solid-liquid interface formation, combined with radiometric temperature and X-ray diffraction measurements, reveals a pronounced reduction in melting boundary slope in Bi-V with pressure. The unusually steep initial slope is attributed to low configurational entropy of melting, arising from structural ordering and coordination matching in the cool liquid, while slope reduction is driven by entropy increase correlated with significant liquid structure changes with rising pressure and temperature. Finally, the data rule out kinetic effects on melting in shock compression experiments and demonstrate the need for improved theoretical phase diagrams.

Materials science↗
DOE OSTI2026

Mechanistic insights into CO 2 capture and electrochemical conversion in nonaqueous Na–CO 2 batteries

Developing efficient energy storage systems that capture and convert CO 2 is critical for mitigating carbon emissions. Here, we report a Na–CO 2 battery with ruthenium dioxide (RuO 2 ) cathode catalysts and propane-1,3-diamine (PDA) as an electrolyte additive to enhance CO 2 capture and conversion efficiency. The integration of CO 2 adsorption and electrochemical reduction facilitates activation of the inert CO 2 molecule and circumvents gas–solid–liquid ternary-phase reactions at the interface. We employed density functional theory (DFT) calculations to systematically unravel the reaction mechanisms and energetics governing CO 2 reduction, both with and without PDA. Our results reveal an energetically favorable pathway toward the formation of Na 2 CO 3 and C as final discharge products, rather than sodium oxalate (Na 2 C 2 O 4 ). The CO 2 –amine adduct facilitates charge transfer from PDA to CO 2 , which results in activation of CO 2 . The kinetics of CO 2 conversion and regeneration of PDA were found to be significantly enhanced on the RuO 2 surface compared to the bulk electrolyte. More importantly, pre-activation of CO 2 via the amine–CO 2 adduct lowers the total overpotential to 2.44 V, compared to 3.13 V without PDA. This study provides fundamental insights into CO 2 electroreduction in Na–CO 2 batteries and underscores the promise of electrolyte engineering for sustainable CO 2 utilization and high-performance energy storage.

25 ENERGY STORAGE↗