Search NASA⌕ Search

SEARCH · Search NASA

Results for “interfacial barrier”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Mechanical properties testing and results for thermal barrier coatings

Thermal Barrier Coatings (TBC's) provide a significant challenge in the evaluation of their mechanical properties in ways that provide data that is not specimen dependent. The paper reviews various developments of the principal author over the past several years for both plasma sprayed and physical vapor deposited (PVD) materials, as well as new data on the fatigue behavior of one material system. The test methods that have been employed address tensile and compressive modulus and ultimate strength, tensile and compressive fatigue strength, and interfacial strength. This testing is now underway. Property testing is especially difficult for TBC's owing to the limitation on fabrication thickness of the coating. Bending tests are not used as these tests do not provide sufficiently uniform states of strain for property evaluations. Test specimens with uniform states of axial stress have been devised for each material system. The results show that the material property results between various experimenters and experimental methods are not yet consistent. However, the results provide critical design data at a suitable level of accuracy for life prediction. The paper will review both tensile and compressive mechanical testing of uniaxial specimens showing property dependencies on material density and temperatures for both material systems. Successful test results for both tensile and compressive fatigue loadings will be given. The test data shows that the fatigue strength of the TBC's is highly stress dependent in both loading conditions and is likely to depend on stress range and not mean stress. The fatigue strength of the plasma sprayed TBC's appears to increase with elevated temperatures in a range of temperatures below the creep activation temperature for the materials. The plasma sprayed TBC materials have been confirmed to have cyclic hysteresis at all temperature levels down to room temperature. Limited failure analysis data for various specimens suggest that the failure modes are driven by normal geometric discontinuities in the TBC's.

Cruse, T. A.↗
DOE OSTI2021

Semi-solid alkali metal electrodes enabling high critical current densities in solid electrolyte batteries

The need for higher energy density rechargeable batteries has generated interest in alkali metal electrodes paired with solid electrolytes. However, metal penetration and electrolyte fracture at low current densities have emerged as fundamental barriers. Here, we show that for pure metals in the Li-Na-K system, the critical current densities scale inversely to mechanical deformation resistance. Furthermore, we demonstrate two electrode architectures in which the presence of a liquid phase enables high current densities while preserving the shape retention and packaging advantages of solid electrodes. First, biphasic Na-K alloys show K + critical current densities (with K-β*-Al 2 O 3 electrolyte) that exceed 15 mA∙cm -2 . Second, introducing a wetting interfacial film of Na-K liquid between Li metal and Li 6.75 La 3 Zr 1.75 Ta 0.25 O 12 (LLZTO) solid electrolyte doubles the critical current density and permits cycling at areal capacities exceeding 3.5 mAh∙cm -2 . These design approaches hold promise for overcoming electro-chemo-mechanical stability issues that have heretofore limited performance of solid-state metal batteries.

25 ENERGY STORAGE↗
NASA NTRS2003

Multiphase flow and phase change in microgravity: Fundamental research and strategic research for exploration of space

NASA is preparing to undertake science-driven exploration missions. The NASA Exploration Team's vision is a cascade of stepping stones. The stepping-stone will build the technical capabilities needed for each step with multi-use technologies and capabilities. An Agency-wide technology investment and development program is necessary to implement the vision. The NASA Exploration Team has identified a number of areas where significant advances are needed to overcome all engineering and medical barriers to the expansion of human space exploration beyond low-Earth orbit. Closed-loop life support systems and advanced propulsion and power technologies are among the areas requiring significant advances from the current state-of-the-art. Studies conducted by the National Academy of Science's National Research Council and Workshops organized by NASA have shown that multiphase flow and phase change play a crucial role in many of these advanced technology concepts. Lack of understanding of multiphase flow, phase change, and interfacial phenomena in the microgravity environment has been a major hurdle. An understanding of multiphase flow and phase change in microgravity is, therefore, critical to advancing many technologies needed. Recognizing this, the Office of Biological and Physical Research (OBPR) has initiated a strategic research thrust to augment the ongoing fundamental research in fluid physics and transport phenomena discipline with research especially aimed at understanding key multiphase flow related issues in propulsion, power, thermal control, and closed-loop advanced life support systems. A plan for integrated theoretical and experimental research that has the highest probability of providing data, predictive tools, and models needed by the systems developers to incorporate highly promising multiphase-based technologies is currently in preparation. This plan is being developed with inputs from scientific community, NASA mission planners and industry personnel. The fundamental research in multiphase flow and phase change in microgravity is aimed at developing better mechanistic understanding of pool boiling and ascertaining the effects of gravity on heat transfer and the critical heat flux. Space flight experiments conducted in space have shown that nucleate pool boiling can be sustained under certain conditions in the microgravity environment. New space flight experiments are being developed to provide more quantitative information on pool boiling in microgravity. Ground-based investigations are also being conducted to develop mechanistic models for flow and pool boiling. An overview of the research plan and roadmap for the strategic research in multiphase flow and phase change as well as research findings from the ongoing program will be presented.

Singh, Bhim S.↗
DOE OSTI2023

Coordination-Dependent Chemical Reactivity of TFSI Anions at a Mg Metal Interface

Charge transfer across the electrode–electrolyte interface is a highly complex and convoluted process involving diverse solvated species with varying structures and compositions. Despite recent advances in in situ and operando interfacial analysis, molecular specific reactivity of solvated species is inaccessible due to a lack of precise control over the interfacial constituents and/or an unclear understanding of their spectroscopic fingerprints. However, such molecular-specific understanding is critical to the rational design of energy-efficient solid–electrolyte interphase layers. We have employed ion soft landing, a versatile and highly controlled method, to prepare well-defined interfaces assembled with selected ions, either as solvated species or as bare ions, with distinguishing molecular precision. Equipped with precise control over interfacial composition, we employed in situ multimodal spectroscopic characterization to unravel the molecular specific reactivity of Mg solvated species comprising (i.e., bis(trifluoromethanesulfonyl)imide, TFSI – ) anions and solvent molecules (i.e., dimethoxyethane, DME/G1) on a Mg metal surface relevant to multivalent Mg batteries. In situ multimodal spectroscopic characterization revealed higher reactivity of the undercoordinated solvated species [Mg-TFSI-G1] + compared to the fully coordinated [Mg-TFSI-(G1) 2 ] + species or even the bare TFSI – . These results were corroborated by the computed reaction pathways and energy barriers for decomposition of the TFSI – within Mg solvated species relative to bare TFSI – . Finally, we evaluated the TFSI reactivity under electrochemical conditions using Mg(TFSI) 2 –DME-based phase-separated electrolytes representing different solvated constituents. Based on our multimodal study, we report a detailed understanding of TFSI – decomposition processes as part of coordinated solvated species at a Mg-metal anode that will aid the rational design of improved sustainable electrochemical energy technologies.

25 ENERGY STORAGE↗
DOE OSTI2022

Interfacial Water Manipulation with Ionic Liquids for the Oxygen Reduction Reaction

The role that interfacial water plays in both promoting and inhibiting the electrochemical oxygen reduction reaction (ORR) remains somewhat unclear and controversial. Here, we use electroanalytical chemistry, spectroscopy, and microkinetic modeling to probe the impact of hydrophobic ionic liquid (IL) thin films on interfacial water structure and its role in promoting or inhibiting the ORR. Through the use of in situ ATR-SEIRAS, we find that the IL thin films limit the content of water at the interface and prevent the formation of hydrogen bond stabilized water organization. The impact of this exclusion of water on the promotion of the ORR is through the reduced coverage of OH ad spectator species. The decreased solvation of “active” OH ad species weakens its interaction with the catalyst surface, lowering the barrier to the last step in the ORR mechanism. This “destabilized” OH ad impact on ORR kinetics is confirmed through a microkinetic model. Furthermore, the results presented here highlight the mechanistic pathway through which hydrophobic ILs enhance ORR kinetics and point to pathways to both further improve this performance enhancement and the potential for integration of hydrophobic ILs into other technologically relevant elementary electrochemical reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Abnormally Low Activation Energy in Cubic Na3SbS4 Superionic Conductor

Inorganic Na-ion superionic conductors play a vital role in all-solid-state Na batteries that operate at room temperature. Sodium thioantimonate (Na3SbS4), a popular sulfide-based solid electrolyte, has attracted serious attention due to its advantages of high ionic conductivity at room temperature and impressive chemical stability under ambient conditions. Much research detailing Na3SbS4 focused on its synthetic approaches and interfacial stability against Na metal, yet, there is limited information elucidating a fundamental understanding of the Na- ion diffusion mechanisms in Na3SbS4 with different crystal structures (e.g., tetragonal and cubic). Herein, we combine real-time electrochemical impedance measurements with theoretical simulations based on density functional theory and in situ quasi-elastic neutron scattering to study the Na-ion conductive properties of Na3SbS4 during its phase transition from a tetragonal to cubic structure. Although there is a slight change in the lattice parameters, the energy barrier for Na-ion diffusion in the tetragonal structure was determined to be much larger (5-10 times) than that in the cubic structure from both theoretical and experimental perspectives. The high degree of symmetry in cubic Na3SbS4 leads to less interatomic correlations between Na and S(Sb) atoms, a shorter jump distance (2.85 angstrom), and a larger diffusion coefficient. This research provides insight into understanding the Na-ion diffusion in solid electrolytes with phase transitions and provides fundamental guidance for designing novel solid-state Na-ion conductors.

Zhang, Qian↗
DOE OSTI2022

Rapid assessment of interfacial stabilization mechanisms of metastable precipitates to accelerate high-temperature Al-alloy development

Precipitate strengthened high-temperature alloys are currently used in safety-critical applications. Understanding precipitate stability and solute segregation mechanisms at high temperatures is key to designing high-strength alloys. Rapid in-situ approaches, therefore, are pivotal in accelerating the alloy design process. Hereby using the test case of a promising high-temperature Al-Cu-Mn-Zr alloy, we demonstrate the value of in-situ atom probe tomography coupled with in-situ transmission electron microscopy to reveal atomic-scale mechanisms that lead to the emergence of non-equilibrium solute segregation. Mn and Zr segregation at strengthening precipitate(θ’)-matrix interface increases the kinetic barrier for phase transformation thus retaining high-temperature strength.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Diffusion coefficients predicting facet-dependent crystallization in amorphous silicon nitride

Amorphous silicon nitride is a common material in microelectronics devices, which acts as an insulating barrier. Extended annealing times at elevated temperature can initiate crystallization of α-Si 3 ⁢ N 4 , which does not possess the same barrier properties. Molecular dynamics can resolve the fundamental mechanism for α-Si 3 ⁢N 4 crystallization and the influence of local environments. Here, we compare two interatomic potentials and conclude that these models predict structural features (e.g., angular distributions and densities) which span the range of experimental measurements. We confirmed these models reproduce experimental estimates of activation energy and leveraged these models to identify crystallization drivers. We conclude that near-T g , facet-dependent silicon nitride crystal growth rates can be predicted directly by either bulk or interfacial diffusion properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Breaking the passivation barrier via d-p orbital optimization for stable hydrogen production and sulfion upgrading

The development of energy-efficient hydrogen production technologies represents a critical pathway toward achieving global carbon neutrality objectives. This work provides fundamental insights into overcoming catalyst passivation challenges in sulfide oxidation reaction (SOR)-coupled hydrogen evolution reaction (HER) systems through precise orbital hybridization engineering. Our theoretical simulations reveal that sulfur-passivated ruthenium surfaces can effectively modulate d-p orbital hybridization, significantly reduce d-electron activity while stabilizing long-chain S 8 species and decreasing intermediate adsorption energies. Furthermore, metal carbides/ruthenium heterostructure (MC/Ru, M = V, Mo, W) was designed to achieve simultaneous optimization of both HER (∆G H* = −0.11 eV) and SOR (∆G RDS = 1.51 eV) via work-function-mediated interfacial electron transfer, which effectively tailors surface electronic states. Guided by theoretical predictions, we successfully synthesized a series of metal carbides/ruthenium/nitrogen-doped carbon catalysts based on a solid-phase reaction and designated as MC/Ru@NC (M = V, Mo, W). The optimized VC/Ru@NC catalyst exhibits exceptional performance in a membrane-free two-electrode system, achieving an ultralow cell voltage of 0.76 V at 200 mA cm −2 with outstanding stability over 1600 h, while maintaining 97.5 % Faradaic efficiency for hydrogen production and 73.8 % sulfur recovery efficiency.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Bottlebrush Block Copolymers at the Interface of Immiscible Liquids: Adsorption and Lateral Packing

Amphiphilic bottlebrush block copolymers (BBCPs), having a hydrophilic bottlebrush polymer (BP) linked covalently to a hydrophobic BP, were found to segregate to liquid-liquid interfaces to minimize the free energy of the system. The key parameter influencing the outcome of the experiments is the ratio between the degree of polymerization of the backbone (NBB) and that of the side-chain brushes (NSC). Specifically, a spherical, star-like configuration results when NBB < NSC, while a cylindrical, bottlebrush-like shape is preferred when NBB > NSC. Dynamic interfacial tension (γ) and fluorescence recovery after photobleaching (FRAP) measurements show that the BBCP configuration influences the areal density and in-plane diffusion at the fluid interface. The characteristic relaxation times associated with BBCP adsorption (τA) and reorganization (τR) were determined by fitting time-dependent interfacial tension measurements to a sum of two exponential relaxation functions. Both τA and τR initially increased with NBB up to 92 repeat units, due to the larger hydrodynamic radius in solution and slower in-plane diffusivity, attributed to a shorter cross-sectional diameter of the side-chains near the block junction. This trend reversed at NBB = 190, with shorter τA and τR attributed to increased segregation strength and exposure of the bare water/toluene interface due to tilting and/or wiggling of the backbone chains, respectively. The adsorption energy barrier decreased with higher NBB, due to a reduced BBCP packing density at the fluid interface. In conclusion, this study provides fundamental insights into macromolecular assembly at fluid interfaces, as it pertains to unique bottlebrush block architectures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Mechanistic origins of corrosion protection of aluminum alloys by graphene/polyetherimide nanocomposite coatings

Light-weighting vehicular components through adoption of light-metal structural alloys holds promise for reducing the fuel consumption of internal combustion engine vehicles and increasing the range of battery electric vehicles. However, the alloyed microstructure and surface precipitates of aluminum alloys render these materials susceptible to corrosion under modest excursions from neutral pH. Traditional chromium-based anodic passivation layers are subject to increasingly stringent environmental regulations, whereas options for sacrificial cathodic films are sparse for electropositive metals. While hybrid nanocomposite coatings have shown initial promise, mechanistic underpinnings remain poorly understood. Here, a fully imidized polyetherimide (PEI) resin is utilized as the continuous phase with inclusion of unfunctionalized exfoliated graphite (UFG). A comprehensive investigation of the mechanisms of corrosion protection reveals key fundamental design principles underpinning corrosion inhibition. First, strong interfacial adhesion, which for PEI is facilitated by binding of imide carbonyl moieties to Lewis acidic sites on Al surfaces. Second, the miscibility of ion-impervious nanoscopic UFG fillers and stabilization of a substantial interphase region at UFG/PEI boundaries that result in minimizing the free volume at the filler/polymer interface. Finally, extended tortuosity of ion diffusion pathways imbued by the below-percolation-threshold 2D fillers. These three design principles help govern and modulate ion transport from electrolyte/coating interfaces to the coating/metal interface and are crucial for the extended preservation of barrier properties. The results suggest an approach to systematically activate multiple modes of corrosion inhibition through rational design of hybrid nanocomposite coatings across hard-to-abate sectors where light metal alloys are likely to play an increasingly prominent role.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Basic Energy Sciences Roundtable: Foundational Science to Accelerate Nuclear Energy Innovation

Energy security, availability, and reliability are among the greatest challenges facing the nation and the planet. An abundant potential source of energy resides in the fundamental atomic building blocks of the universe in the form of nuclear fission and fusion reactions. In fact, energy from nuclear fission currently provides the majority of the world’s zero-carbon electricity, and future fusion energy systems offer great promise; carbon-free nuclear energy technologies can be key to the world’s decarbonized energy future. Although contemporary fission systems use well-established technologies to supply safe and efficient baseload power, they could be more fuel efficient and less costly. Moving beyond massive light-water fission reactors to a variety of advanced nuclear systems—which will vary in size and operate in extremes of temperature, corrosivity, and other parameters—will place stringent conditions on materials and chemical systems. New demands will be placed on the coolants and solvents, the materials, and the monitoring tools used in these reactors. Fusion-based nuclear energy will require superior materials to withstand extremely high temperatures, plasma exposure, radiation damage, and implanted gases. The advantages associated with these new fission and fusion technologies will be realized only through continued advancements in the fundamental science underpinning our knowledge of the physics and chemistry of nuclear systems gained via improved experimental and computational methods. In July 2022, the U.S. Department of Energy’s Office of Basic Energy Sciences—in coordination with the Offices of Nuclear Energy, Fusion Energy Sciences, and Advanced Scientific Computing Research—held a virtual roundtable titled “Foundational Science to Accelerate Nuclear Energy Innovation” to discuss the scientific and technical barriers for advanced nuclear energy systems. Five priority research opportunities were identified to address these scientific and technical challenges and to accelerate progress toward the realization of next-generation fusion and fission energy systems. The foundational science gaps inhibiting the advancement of nuclear energy technologies are identified and tackled in five priority research opportunities. These opportunities pave the way to accelerate the development and ultimately the adoption of new nuclear energy systems. They include the fundamental aspects of ion-electron interactions; novel properties of next-generation coolants and solvents; interfacial dynamics, not only in solids, but in other aspects of nuclear reactors; novel operando and in situ monitoring and sensing; and artificial intelligence to accelerate condensed phases discovery. Building on the foundation established by previous Basic Energy Sciences workshops, these opportunities encompass recent advances in fundamental knowledge and focus on the experimental and computational methods needed to resolve major technical challenges for nuclear energy technologies. Through developing fundamental scientific insight as well as pushing the frontiers of modeling complex systems and probing the operation of materials and chemical systems in extreme environments, research motivated by the priorities identified here will further develop the promise, potential, and utilization of nuclear energy for a clean energy future.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2023

Interfacial Connections between Organic Perovskite/n + Silicon/Catalyst that Allow Integration of Solar Cell and Catalyst for Hydrogen Evolution from Water

Abstract The rapidly increasing solar conversion efficiency (PCE) of hybrid organic–inorganic perovskite (HOIP) thin‐film semiconductors has triggered interest in their use for direct solar‐driven water splitting to produce hydrogen. However, application of these low‐cost, electronic‐structure‐tunable HOIP tandem photoabsorbers has been hindered by the instability of the photovoltaic‐catalyst‐electrolyte (PV+E) interfaces. Here, photolytic water splitting is demonstrated using an integrated configuration consisting of an HOIP/n + silicon single junction photoabsorber and a platinum (Pt) thin film catalyst. An extended electrochemical (EC) lifetime in alkaline media is achieved using titanium nitride on both sides of the Si support to eliminate formation of insulating silicon oxide, and as an effective diffusion barrier to allow high‐temperature annealing of the catalyst/TiO 2 ‐protected‐n + silicon interface necessary to retard electrolytic corrosion. Halide composition is examined in the (FA 1‐x Cs x )PbI 3 system with a bandgap suitable for tandem operation. A fill factor of 72.5% is achieved using a Spiro‐OMeTAD‐hole‐transport‐layer (HTL)‐based HOIP/n + Si solar cell, and a high photocurrent density of −15.9 mA cm −2 (at 0 V vs reversible hydrogen electrode) is attained for the HOIP/n + Si/Pt photocathode in 1 m NaOH under simulated 1‐sun illumination. While this thin‐film design creates stable interfaces, the intrinsic photo‐ and electro‐degradation of the HOIP photoabsorber remains the main obstacle for future HOIP/Si tandem PEC devices.

08 HYDROGEN↗
DOE OSTI2020

The Molybdenum Oxide Interface Limits the High-Temperature Operational Stability of Unencapsulated Perovskite Solar Cells

Here, we report on the improved operational stability of unencapsulated perovskite solar cells (PSCs) aged in an ambient atmosphere at elevated temperatures (70 °C) for >1000 h under constant illumination and bias at 30–50% relative humidity. We identify a previously unseen interfacial degradation mechanism concerning the use of a MoO x interlayer, which was originally added to increase operational stability. Specifically, the hole-transport layer/MoO x interface buckles under illumination at 70 °C, which leads to delamination and rapid losses of short-circuit current density corresponding to an average $t_{80}$ of ~55 h. By judiciously evaluating various hole-transport layers, interlayers, and contacts, we find that replacing the MoO x with a VO x interlayer, regardless of the other components in the solar cell, alleviates this buckling issue due to its higher activation barrier toward crystallization, leading to significant gains in PSC operational stability. Unencapsulated devices aged in an ambient atmosphere with a VO x interlayer retain 71% of their initial PCE on average after constant illumination and bias at 70 °C for 1100 h ($t_{80}$ ~ 645 h). Currently, this is the highest temperature reported for the operational stability of unencapsulated n-i-p PSCs aged in air. Identification of a new facet of the complex degradation mechanisms in PSCs will allow for targeted acceleration testing to speed the deployment of low-cost, long-lasting electricity generation under realistic operating temperatures.

14 SOLAR ENERGY↗
DOE OSTI2024

Sustainedly High-Rate Electroreduction of CO 2 to Multi-Carbon Products on Nickel Oxygenate/Copper Interfacial Catalysts

Copper (Cu) is the most attractive electrocatalyst for CO 2 reduction to multi-carbon (C 2+ ) products with high economic value in considerable amounts. However, the rational design of a structurally stable Cu-based catalyst that can achieve high activity and stability towards C 2+ products remain a grand challenge. Here, in this study, a highly stable nickel oxygenate/Cu electrocatalyst is developed with abundant NiOOH/Cu interfaces by in situ electrochemical reconstruction. The nickel oxygenate/Cu electrocatalyst achieves a superior Faradaic efficiency of 86.3 ± 3.0% and a record partial current density of 2085 A g -1 for C 2+ products with long-term stability. In situ experimental and theoretical studies demonstrates that the exceptional performance in generating C 2+ products is attributed to the presence of the NiOOH/Cu interfaces which increase *CO coverage, lower energy barrier for *CO coupling and stabilize *OCCO simultaneously. This work provides new insights into the rational design of electrocatalysts to achieve stable and efficient electrocatalytic CO 2 reduction capabilities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Nanoscale Ferroelectric Control of Novel Electronic States in Layered Two-Dimensional Materials (Final Report)

In this DOE Early Career project “Nanoscale Ferroelectric Control of Novel Electronic States in Layered Two-Dimensional Materials,” the PI’s group has combined ferroelectric field effect with nanoscale domain imaging and writing to design the electronic and optical properties of two-dimensional (2D) van der Waals materials, including graphene and transition metal dichalcogenides MoS2 and ReS2. The van der Waals materials have been prepared into field effect transistor (FET) devices with ferroelectric gates. Through domain patterning in a ferroelectric polymer PVDF-TrEF top-gate via conductive atomic force microscopy, the team has created programmable Schottky junctions in monolayer MoS 2 , where both barrier height and I-V rectifying polarity can be reconfigured. The transport anisotropy of monolayer to few-layer ReS 2 has been mapped out by defining the entire channel into an insulating state and creating nanoscale conducting paths along different directions through domain writing in the ferroelectric top-gate. The result shows that the conductivity along and perpendicular to the Re-chain can differ by >5.5x10 4 . Theoretical modeling points to the band origin of the transport anomaly and reveals the emergence of a flat band in few-layer ReS 2 . The interfacial epitaxial relation between ReS 2 and PVDF-TrFE further promotes the formation of close-packed, highly ordered PVDF-TrFE nanowires with width of 35 nm and 10 nm. Nonvolatile modulation of quantum Hall effect has been achieved in graphene FETs with a ferroelectric oxide Ba 0.4 Sr 0.6 TiO 3 back-gate. Scattering from the remote surface optical phonon in Ba 0.4 Sr 0.6 TiO 3 limits the room temperature mobility of graphene to be about 3x10 4 cm 2 /Vs. Steep-slope switching has been achieved in MoS 2 FETs back-gated by polycrystalline Pb(Zr,Ti)O 3 , which signals a static-state negative capacitance mode without involving an additional dielectric layer. Piezoresponse force microscopy studies show that the sub-threshold swing can be well correlated with the domain wall density in Pb(Zr,Ti)O 3 . The team also observes an unconventional filtering effect of the second harmonic generation response at the MoS 2 /Pb(Zr,Ti)O 3 heterointerface, which can be accounted for by the alignment between one of the polar axes of MoS 2 and the chiral dipole rotation at the surface of domain wall in Pb(Zr,Ti)O 3 . The research supported by this DOE grant has significantly advanced the fundamental understanding and functional design of ferroelectric/2D van der Waals heterostructures for their implementation towards energy applications.

36 MATERIALS SCIENCE↗
NASA NTRS2016

Interfacial Structure and Capacitance of Li-doped Ionic Liquid Electrolytes from Molecular Simulations

Ionic liquids have been proposed as candidate electrolytes for high-energy density, rechargeable batteries, supercapacitors, and hybrid energy storage devices. Though Li-salt is often present in these systems, its influence on interfacial properties is largely uncharacterized. We, thereby, present an extensive computational analysis, supported by experimental comparisons, of the properties of a representative set of these electrolytesat an ideal carbon interface as a function of Li-salt doping and voltage. We have performed polarizable molecular (MD) dynamics simulations, using the APPLEP force field, to evaluate electric double layer (EDL) capacitance and distribution of Li+ in the EDL. Differential capacitance exhibits the characteristic camel profile and is insensitive to Li-doping. Li+ localizes in the second molecular layer of the EDL, which is a result of confinement from free energy barriers associated with ion layering. Joint MDelectronic structure computations show the electrochemical window of the electrolytes to be a weak function of Li-doping. Estimates of supercapacitor specific energy are made using the computed window and capacitance. The magnitude and trends in specific energy are in good agreement with experiment.

batteries↗
DOE OSTI2024

Interfacial Engineering Using Covalent Organic Frameworks in Polymer Composites for High‐Temperature Electrostatic Energy Storage

Abstract The use of inorganic nanofillers has been an effective method to improve high‐temperature capacitive performance of dielectric polymers, though there are unmet challenges such as undesirable organic–inorganic compatibility, and low efficiencies and energy densities. Herein, a surface functionalization strategy using covalent organic frameworks (COFs) is employed to address such challenges in realizing high‐performing polymer composites. Specifically, core–shell structured nanoparticles, where ZrO 2 nanoparticles act as the core and a COF material forms the shell, are constructed and composited with the polyetherimide (PEI) matrix. The design leverages the high electron affinity ( E A ) of the outer COF shell to create energy traps, thereby capturing free charges and limiting electrical conduction. Concurrently, the low E A and wide bandgap of the ZrO 2 core introduce energy barriers to impede charge injection and migration. This orchestrated “energy level cascade” results in a marked reduction of leakage current and energy loss. The resulting polymer composite showcases an impressive discharged energy density of 6.21 J cm −3 at an efficiency above 90%, with a maximum discharged energy density reaching 7.43 J cm −3 at 150 °C. These performance metrics position the PEI/ZrO 2 @COF polymer composite to surpass or be on par with state‐of‐the‐art high‐temperature PEI composites and other advanced polymer dielectrics.

Xie, Zongliang↗