Search NASA⌕ Search

SEARCH · Search NASA

Results for “ion optics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS2000

Performance of Titanium Optics on a NASA 30 Cm Ion Thruster

The results of performance tests with two titanium optics sets are presented and compared to those of molybdenum optics. All tests were conducted on a 30 cm ion thruster that was nearly identical to the NASA Solar Electric Propulsion Technology Application Readiness (NSTAR) thruster design. Optics performance tests were conducted over a thruster input power range of 0.5 to 4.6 kW. Optics performance including impingement-limited total voltages, electron backstreaming limits, screen grid ion transparencies, near-field beam current density profiles, beam divergence angles, and beam divergence thrust correction factors were determined throughout this power range. The impingement-limited total voltages for titanium optics were within 10 to 55 V of those for molybdenum optics. Electron backstreaming limit magnitude as a function of peak beam current density for both molybdenum and titanium optics were within a few volts of each other, indicating similar hot grid gaps for these two grid materials during steady-state operation. Beam divergence half-angles at 90 percent of the total beam current and thrust correction factors for both titanium optics sets were within one degree and one percent, respectively, of those for molybdenum optics. When thruster power was increased to 2.3 kW immediately following discharge ignition, the titanium screen grid came into contact with the accelerator grid within five minutes of ignition. Relative to molybdenum, titanium's larger thermal expansion and smaller thermal conductivity likely caused the screen grid to thermally expand more relative to the accelerator grid during startup.

Soulas, George C.↗
NASA NTRS1997

Ion Figuring of Replicated X-Ray Optics

This investigation included experiments to demonstrate ion beam figuring effects on electroless nickel with the expressed desire to figure X-ray optic mandrels. It was important to establish that ion beam figuring did not induce any adverse effects to the nickel surface. The ion beam has consistently been shown to be an excellent indicator of the quality of the subsurface. Polishing is not the only cause for failure in the ion beam final figuring process, the material composition is equally important. Only by careful consideration of both these factors can the ion beam final figuring process achieve its greatest potential. The secondary goal was to construct a model for representing the ion beam material removal rate. Representing the ion beam removal rate is only an approximation and has a number of limiting factors. The resolution of the metrology apparatus limits the modeling of the beam function as well. As the surface error corrections demand more precision in the final figuring, the model representing beam function must be equally precise. The precision to which the beam function can be represented is not only determined by the model but also by the measurements producing that model. The method developed for determining the beam function has broad application to any material destined to be ion beam figured.

Cantey, Thomas M.↗
NASA NTRS2013

Sub-mm Scale Fiber Guided Deep/Vacuum Ultra-Violet Optical Source for Trapped Mercury Ion Clocks

We demonstrate the functionality of a mercury capillary lamp with a diameter in the sub-mm range and deep ultraviolet (DUV)/ vacuum ultraviolet (VUV) radiation delivery via an optical fiber integrated with the capillary. DUV spectrum control is observed by varying the fabrication parameters such as buffer gas type and pressure, capillary diameter, electrical resonator design, and temperature. We also show spectroscopic data of the 199Hg+ hyper-fine transition at 40.5GHz when applying the above fiber optical design. We present efforts toward micro-plasma generation in hollow-core photonic crystal fiber with related optical design and theoretical estimations. This new approach towards a more practical DUV optical interface could benefit trapped ion clock developments for future ultra-stable frequency reference and time-keeping applications.

lamps↗
NASA NTRS1999

Optical model methods of predicting nuclide production cross sections from heavy ion fragmentation

Quantum mechanical optical potential methods for calculating inclusive isotope and element production cross sections from the fragmenting of heavy nuclei by intermediate- and high-energy protons and heavy ions are presented based upon a modified abrasion-ablation-FSI (frictional spectator interaction) collision model. The abrasion stage is treated as a quantum mechanical knockout process that leaves the residual prefragment in an excited state. Prefragment excitation energies are estimated using a combined liquid drop and FSI method. In ablation the prefragment deexcites by particle and photon emission to produce the final fragment. Contributions from electromagnetic dissociation to single nucleon removal cross sections are incorporated using a Weiszacker-Williams theory that includes electric dipole and electric quadrupole interactions. Estimates of elemental and isotopic production cross sections are in good agreement with published cross section measurements for a variety of projectile-target-beam energy combinations.

NASA Discipline Radiation Health↗
NASA NTRS1990

Unidentified ions in comets

Optical spectra were taken of comets Halley, West, and Brorsen-Metcalf in the wavelength region 3200 to 6400 A. These spectra were offset approximately 10(exp -5) to 10(exp -6) km tailward from the nucleus so that the features detected were all ions with the exception of a very small residual C2 emission at 5165 A. The full labeled tail spectrum of comet Halley is given. While most of the features detected are attributable to CO(+), H2O(+), CO2(+), CH(+), and OH(+), there are three moderately strong bands in the spectra of comets Halley and Brorsen-Metcalf which remain unidentified. These features were not detected in comet West. All three spectra in the 4800 to 5400 A region are presented, Brorsen-Metcalf is the gassiest of the three. The central wavelengths of the unidentified features are 4930, 5300, and 6000 A. In an effort to identify the ions responsible for these features as well as to confirm previous identifications, laboratory spectra of ions were compared with the comet spectra. H2O(+) and CO(+) are known to have extensive emission in the 4800 to 6200 A region. Therefore, the possibility that these unidentified features are due to H2O(+) and CO(+) was investigated. A search for the following bands was conducted: H2O(+) (11-0), H2O(+) (12-0), H2O(+) (13-1), CO(+) (1-1), and CO(+) (0-0). CO(+) (1-1) and CO(+) (0-0) were previously identified and are present in all the spectra examined. The H2O(+) (11-0) band was identified. Comparison of the H2O(+) (11-0) synthetic spectrum with comet Brorsen-Metcalf data is presented. The relative fluxes of the blended H2O(+) lines in the synthetic spectrum match those of the cometary data. After eliminating H2O(+) and CO(+) as significant contributors to the stronger unidentified features, spectra of ions which are not yet identified in the optical region of comets were compared to the data. These ions are NH(+), CS(+), and C2(+). None of these ions appears to be a significant contributor to the optical spectra of these three comets. In conclusion, H2O(+) (11-0) was unabiguously identified in cometary optical spectra. No other molecular ion for which there are laboratory spectra can explain the unidentified features found in the ion tails of comets Halley and Brorsen-Metcalf.

Engel, Lisa↗
NASA NTRS1977

Optical and electrical properties of ion beam textured Kapton and Teflon

An electron bombardment argon ion source was used to ion etch polyimide (Kapton) and fluorinated ethylene, FEP (Teflon). Samples of polyimide and FEP were exposed to (0.5-1.0) keV Ar ions at ion current densities of (1.0-1/8) mA/sq cm for various exposure times. Changes in the optical and electrical properties of the samples were used to characterize the exposure. Spectral reflectance and transmittance measurements were made between 0.33 and 2.16 micron m using an integrating sphere after each exposure. From these measurements, values of solar absorptance were obtained. Total emittance measurements were also recorded for some samples. Surface resistivity was used to determine changes in the electrical conductivity of the etched samples. A scanning electron microscope recorded surface structure after exposure. Spectral optical data, resistivity measurements, calculated absorptance and emittance measurements are presented along with photomicrographs of the surface structure for the various exposures to Ar ions.

Mirtich, M. J.↗
NASA NTRS1989

Nuclear fragmentation energy and momentum transfer distributions in relativistic heavy-ion collisions

An optical model description of energy and momentum transfer in relativistic heavy-ion collisions, based upon composite particle multiple scattering theory, is presented. Transverse and longitudinal momentum transfers to the projectile are shown to arise from the real and absorptive part of the optical potential, respectively. Comparisons of fragment momentum distribution observables with experiments are made and trends outlined based on our knowledge of the underlying nucleon-nucleon interaction. Corrections to the above calculations are discussed. Finally, use of the model as a tool for estimating collision impact parameters is indicated.

Khandelwal, Govind S.↗
NASA NTRS1977

Optical and electrical properties of ion beam textured Kapton and Teflon

Results are given for ion beam texturing of polyimide (Kapton) and fluorinated ethylene propylene (Teflon) by means of a 30-cm diam electron bombardment argon ion source. Ion beam-textured Kapton and Teflon surfaces are evaluated for various beam energies, current densities, and exposure times. The optical properties and sheet resistance are measured after each exposure. Provided in the paper are optical spectral data, resistivity measurements, calculated absorptance and emittance measurements, and surface structure SEM micrographs for various exposures to argon ions. It is found that Kapton becomes conducting and Teflon nonconducting when ion beam-textured. Textured Kapton exhibits large changes in the transmittance and solar absorptance, but only slight changes in reflectance. Surface texturing of Teflon may allow better adherence of subsequent sputtered metallic films for a high absorptance value. The results are valuable in spacecraft charging applications.

Mirtich, M. J.↗
NASA NTRS1992

Prompt ionization in the CRIT II barium releases

Observations of electron and ion distributions inside a fast neutral barium jet in the ionosphere show significant fluxes within 4 km of release, presumably related to beam plasma instability processes involved in the Critical Ionization Velocity (CIV) effect. Electron fluxes exceeding 5 x 10 exp 12/sq cm-str-sec-keV were responsible for ionizing both the streaming barium and ambient oxygen. Resulting ion fluxes seem to be consistent with 1-2 percent ionization of the fast barium, as reported by optical observations, although the extended spatial distribution of the optically observed ions is difficult to reconcile with the in situ observations. When the perpendicular velocity of the neutrals falls below critical values, these processes shut off. Although these observations resemble the earlier Porcupine experimental results (Haerendel, 1982), theoretical understanding of the differences between these data and that of earlier negative experiments is still lacking.

Torbert, R. B.↗
NASA NTRS1994

Optical Scattering and Microstructure of Ion Beam Deposited Metal Coatings

Thin films of gold and platinum have been deposited onto super-polished fused silica substrates using thermal evaporation, ion assisted deposition (IAD), sputtering and ion assisted sputtering. The influence of ion beam flux, coating material and deposition rate on the films microroughness have been investigated. Coatings of gold and platinum have been bombarded with low energy (10-20 eV) Ar ions from an electron cyclotron resonance (ECR) ion source during deposition. Short range surface microroughness of coated surfaces has been examined using scanning tunneling microscopy (STM) and atomic force microscopy (AFM), while long range surface microroughness has been characterized using an angle resolved optical scatterometer. Results indicate that bombardment with low energy ions causes significant reduction in microroughness of metal coatings.

metal↗
NASA NTRS1997

Optical Characterization and 2,525 micron Lasing of Cr(2+):Cd(0.85)Mn(0.15)Te

Transition metal doped solids are of significant current interest for the development of tunable solid-state lasers for the near and mid-infrared (1-4 pm) spectral region. Applications of these lasers include basic research in atomic, molecular, and solid-state physics, optical communication, medicine, and environmental studies of the atmosphere. In transition metal based laser materials, absorption and emission of light arises from electronic transitions between crystal field split energy levels of 3d transition metal ions. The optical spectra generally exhibit broad bands due to the strong interaction between dopant and host (electron-phonon coupling). Broad emission bands offer the prospect of tunable laser activity over a wide wavelength range, e.g. the tuning range of Ti:Sapphire extends from 700-1100 run. The only current transition metal laser operating in the mid-infrared wavelength region (1.8-2.4 micro-m) is CO(2+):MgF2, but its performance is severely limited due to strong nonradiative decay at room temperature. Based on lifetime data, the quantum efficiency is estimated to be less than 3 deg/0 11,21. In general, the probability for non-radiative decay via multi-phonon relaxation increases with decreasing energy gap between ground and excited state. Therefore, efficient transition metal lasers beyond -1.6 micro-m are rare. Recently, tunable laser activity around 2.3 micro-m was observed from Cr doped ZnS and ZnSe. The new lasing center in these materials was identified as Cr(2+) occupying the tetrahedral Zn site. Tetrahedrally coordinated optical centers are rather unusual among transition metal lasers. Their potential usefulness, however, has been demonstrated by the recent development of near infrared laser materials such as Cr:forsterite and Cr:YAG, which are based on tetrahedrally coordinated Cr(4+) ions. According to the Laporte selection rule, electric-dipole transition within the optically active 3d-electron shells are parity forbidden. However, a static acentric electric crystal field or the coupling of asymmetric phonons can force electric-dipole transitions by the admixture of wave functions with opposite parity. Tetrahedral sites lack inversion symmetry which provides the odd-parity field necessary to relax the parity selection rule. Therefore, high absorption and emission cross sections are observed. An enhanced radiative emission rate is also expected to reduce the detrimental effect of non-radiative decay. Motivated by the initial results on Cr doped ZnS and ZnSe, we have started a comprehensive effort to study Cr(2+) doped II-VI semiconductors for solid-state laser applications. In this paper we present the optical properties and the demonstration of mid-infrared lasing from Cr doped Cd(0.85)Mn(0.15)Te.

Davis, V. R.↗
NASA NTRS2001

NMSD Mirror Status Review

This presentation provides an overview of the 1.6meter hybrid mirror demonstrator for the Next Generation Space Telescope (NGST) Program. The COI design approach for the NGST program combines the optical performance of glass, with the high specific stiffness capabilities of composite materials. The foundation technologies being exploited in the development of the hybrid mirror focus upon precision composite materials for cryogenic operation, and non-contact optical processing (ion figuring) of the lightweight mirror surface. The NGST Mirror System Demonstrator (NMSD) has been designed and built by Composite Optics, Inc. (COI) and is being optically processed by REOSC The mirror has recently completed the second of three cryogenic optical tests for demonstration of the hybrid technology. The test results will be used for the detailed cryo-figuring of the substrate.

Mehle, Greg↗
NASA NTRS2002

COI NMSD Hybrid Mirror

This presentation provides an overview of the development of the 1.6 meter hybrid mirror demonstrator for the NGST Mirror System Demonstrator (NMSD) program. The COI design approach for the NGST program combines the optical performance of glass, with the high specific stiffness capabilities of composite materials The foundation technologies being exploited in the development of the hybrid mirror focus upon precision Composite Materials for cryogenic operation, and non-contact optical processing (ion figuring) of the lightweight mirror surface. The NGST Mirror System Demonstrator (NMSD) has been designed and built by Composite Optics, Inc. (COI) with optical processing performed by SAGEM (REOSC). The sponsors of these efforts are the NASA Marshall and Goddard Space Flight Centers.

Mehle, Greg↗
NASA NTRS1988

Determination of electron density and temperature in non-LTE plasmas from spectral lines of impurity ions

A novel approach for calculating the populations of the excited Li-like ions C IV, N V, O VI, and Ne VIII is presented. The populations of the 2(2P), 3(2S), 3(2P), and 3(2D) electronic levels in these ions in optically thin plasmas with a broad range of electron density, N(e), and temperature, T(e), are determined from the collisional-radiative model by solving the system of rate equations for the production of excited ions; the equations are linear with respect to the excited ion populations, and the N(e) and T(e) are taken as independent variables. These populations are used to determine the ratios of line intensities for dipole allowed transitions between various energy levels. This approach can be applied to impurities other than the lithiumlike ions and is especially useful for diagnostics of systems where nonintrusive spectroscopic techniques must be used.

Kunc, Joseph A.↗
NASA NTRS1990

High-Sensitivity Ionization Trace-Species Detector

Features include high ion-extraction efficiency, compactness, and light weight. Improved version of previous ionization detector features in-line geometry that enables extraction of almost every ion from region of formation. Focusing electrodes arranged and shaped into compact system of space-charge-limited reversal electron optics and ion-extraction optics. Provides controllability of ionizing electron energies, greater efficiency of ionization, and nearly 100 percent ion-collection efficiency.

Bernius, Mark T.↗
NASA NTRS2001

Radiation dosimetry using three-dimensional optical random access memories

Three-dimensional optical random access memories (3D ORAMs) are a new generation of high-density data storage devices. Binary information is stored and retrieved via a light induced reversible transformation of an ensemble of bistable photochromic molecules embedded in a polymer matrix. This paper describes the application of 3D ORAM materials to radiation dosimetry. It is shown both theoretically and experimentally, that ionizing radiation in the form of heavy charged particles is capable of changing the information originally stored on the ORAM material. The magnitude and spatial distribution of these changes are used as a measure of the absorbed dose, particle type and energy. The effects of exposure on 3D ORAM materials have been investigated for a variety of particle types and energies, including protons, alpha particles and 12C ions. The exposed materials are observed to fluoresce when exposed to laser light. The intensity and the depth of the fluorescence is dependent on the type and energy of the particle to which the materials were exposed. It is shown that these effects can be modeled using Monte Carlo calculations. The model provides a better understanding of the properties of these materials. which should prove useful for developing systems for charged particle and neutron dosimetry/detector applications. c2001 Published by Elsevier Science B.V.

Non-NASA Center↗