Search NASA⌕ Search

SEARCH · Search NASA

Results for “isomer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Neutron transfer reactions on the ground state and isomeric state of a 130 Sn beam

The structure of nuclei around the neutron-rich nucleus 132 Sn is of particular interest due to the vicinity of the Z = 50 and N = 82 shell closures and the r-process nucleosynthetic path. Four states in 131 Sn with a strong single-particle-like component have previously been studied via the (d,p) reaction, with limited excitation energy resolution. Here, the 130 Sn( 9 Be, 8 Be) 131 Sn and 130 Sn( 13 C, 12 C) 131 Sn single-neutron transfer reactions were performed in inverse kinematics at the Holifield Radioactive Ion Beam Facility using particle-γ coincidence spectroscopy. The uncertainties in the energies of the single-particle-like states have been reduced by more than an order of magnitude using the energies of γ rays. The previous tentative J π values have been confirmed. Decays from high-spin states in 131 Sn have been observed following transfer on the isomeric component of the 130 Sn beam. The improved energies and confirmed spin-parities of the p-wave states important to the r-process lead to direct-semidirect cross-sections for neutron capture on the ground state of 130 Sn at 30 keV that are in agreement with previous analyses. A similar assessment of the impact of neutron-transfer on the isomer would require significant nuclear structure and reaction theory input. There are few measurements of transfer reaction on isomers, and this is the first on an isomer in the 132 Sn region.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Pore Aperture Control Toward Size‐Exclusion‐Based Hydrocarbon Separations

Abstract Metal–organic frameworks (MOFs) have been proposed as a promising material for non‐thermal chemical separations owing to their high structural diversity and tunability. Here, we report the synthesis of a zinc‐based MOF containing a three‐dimensional (3D) linker, bicyclo[2.2.2]octane‐1,4‐dicarboxylic acid, with high thermal stability towards the separation of hexane isomers. The incorporation of the 3D linker enhances the structural stability and provides well‐defined pore apertures/channels with sub‐Ångstrom precision. This precision allowed for the separation of similarly sized hexane isomers based on subtle differences in their kinetic diameters. Multi‐component liquid phase batch experiments confirmed the separation of hexanes mixture into linear, monobranched, and dibranched isomers. This work represents a significant milestone in the construction of stable Zn‐based MOFs and the incorporation of 3D linkers as a potential solution to challenging separations.

Lal, Bhajan↗
DOE OSTI2023

Pore Aperture Control Toward Size‐Exclusion‐Based Hydrocarbon Separations

Metal–organic frameworks (MOFs) have been proposed as a promising material for non-thermal chemical separations owing to their high structural diversity and tunability. Here, we report the synthesis of a zinc-based MOF containing a three-dimensional (3D) linker, bicyclo[2.2.2]octane-1,4-dicarboxylic acid, with high thermal stability towards the separation of hexane isomers. The incorporation of the 3D linker enhances the structural stability and provides well-defined pore apertures/channels with sub-Ångstrom precision. This precision allowed for the separation of similarly sized hexane isomers based on subtle differences in their kinetic diameters. Multi-component liquid phase batch experiments confirmed the separation of hexanes mixture into linear, monobranched, and dibranched isomers. This work represents a significant milestone in the construction of stable Zn-based MOFs and the incorporation of 3D linkers as a potential solution to challenging separations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Shock‐tube spectroscopic water measurements and detailed kinetics modeling of 1‐pentene and 3‐methyl‐1‐butene

Abstract To understand the effects of the chemical structure of two C 5 alkene isomers on their combustion properties, and to highlight the major chemical reactions occurring during their high‐temperature oxidation, water time histories were measured behind reflected shock waves for the oxidation of 1‐pentene (C 5 H 10 ‐1) and 3‐methyl‐1‐butene (3M1B) in 99.5% Ar. The experiments were carried out at three different equivalence ratios ( φ = 0.5, 1.0, and 2.0) at pressures and temperatures ranging from 1.29 to 1.47 atm and 1 331 to 1 877 K, respectively. The H 2 O quantification extends the database for 1‐pentene and provides new insights for 3M1B. These unique results were used to validate and to develop a new detailed kinetics model. Numerical predictions are presented, and the new model was able to capture the results with suitable accuracy, with 3M1B being notably more reactive than C 5 H 10 ‐1. Sensitivity and rate‐of‐production analyses were performed to help explain the results. Under the present conditions, the reactivity is rapidly initiated by molecular dissociation of a fraction of the pentene isomers. The initiation phase then induces H‐atom abstraction by active radicals (H, OH, O, HO 2 , and CH 3 ) to first produce alkenyl C 5 H 9 radicals (or an alkyl radical and an alkenyl radical by breaking a C─C bond) and subsequent, smaller fragments. The difference in terms of reactivity between the isomers is essentially due to the fact that 3M1B has one particularly weak tertiary allylic C─H bond, which allows for fast H‐atom abstraction compared with 1‐pentene.

Grégoire, Claire M.↗
DOE OSTI2025

Selective carboxylation of alkenes with CO 2 to form unsaturated carboxylic acid on Sc-exchanged MFI zeolite

Utilization of CO 2 in chemical synthesis as C1 carbon feedstock to introduce a carboxylic group into alkene is valuable for producing unsaturated carboxylic acids. Selective carboxylation of alkenes at targeted positions can be used to regulate the production of such specific unsaturated carboxylic acids or functionalize hydrocarbon plastics that possess residual C=C double bonds. In this study, we investigated the carboxylation of 1-butene and 2-butene (as representative alkene) with CO 2 on Sc-exchanged MFI zeolites using density functional theory calculations. Here, we find that similar to ethylene, the carboxylation of butene is also rate-limited by the β–H transfer. We examined carboxylation at the C1 and C2 positions of 1-butene and cis and trans isomers for 2-butene. Based on activation barriers of the β–H transfer, our results demonstrate that Sc-MFI zeolite preferably carboxylates at the terminal position of butene. In the case of 2-butene, carboxylation of the trans isomer is more favorable than the cis isomer. Furthermore, We show that the energy of degenerate orbitals of C, O and H atoms (involved in the β–H transfer) in the metallalactone ring regulates the activation energy of the β–H transfer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

An experimental and detailed kinetic modeling study of the pyrolysis and oxidation of allene and propyne over a wide range of conditions

Allene and propyne are important intermediates in the pyrolysis and oxidation of higher hydrocarbon fuels, and they are also a major source of propargyl radical formation, which can recombine into different C 6 H 6 isomers and finally produce soot. In a prior work (Panigrahy et al., “A comprehensive experimental and improved kinetic modeling study on the pyrolysis and oxidation of propyne”, Proc. Combust. Inst 38 (2021)), the pyrolysis, ignition , and laminar flame speed of propyne were investigated. To understand the kinetic features of initial fuel breakdown and oxidation of the two C 3 H 4 isomers, new measurements for allene pyrolysis and oxidation are conducted in the present paper at the same operating conditions as those studied previously for propyne. Ignition delay times of allene are measured using a high-pressure shock tube and a heated twin-opposed piston rapid compression machine in the temperature range 690– 1450 K at equivalence ratios of 0.5, 1.0 and 2.0 in ‘air’, and at pressures of 10 and 30 bar. Pyrolysis species measurements of allene and propyne are also performed using a gas chromatography integrated singlepulse shock tube in the temperature range 1000–1700 K at pressure of 2 and 5 bar. Furthermore, laminar flame speeds of allene are measured at elevated gas temperatures of 373 K at pressures of 1 and 2 bar for a wide range of equivalence ratios from 0.6 to 1.5. A newly updated kinetic mechanism developed for this study is the first model that can well reproduce all of the experimental results for both allene and propyne. It is observed that in the pyrolysis process, allene dissociates faster than propyne. Both isomers exhibit similar ignition delay times at high temperatures (>1000 K), while, at intermediate temperatures (770–1000 K) propyne is the faster to ignite, and at lower temperatures (< 770 K) allene becomes more reactive. Furthermore, laminar flame speeds for propyne are found to be slightly faster than those for allene under the conditions studied in this work

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

A conspicuous 27 Al-NMR signal at 72 ppm during isomerization of Keggin Al 13 ions

A sharp signal at 72 ppm was recently observed in 27 Al-NMR spectra during the isomerization of Keggin-Al 13 ions in the presence of calcium and glycine [1]. It has been proposed that this signal corresponds to one of the Keggin isomers. Conversion of the most common ε-isomer of the Keggin series of molecules, having the stoichiometry [AlO 4 Al 12 (OH) 24 (OH 2 ) 12 ] 7+ , is enhanced by the addition of calcium and glycine [2,3]. Here we show that a 72 ppm signal can also be observed in the absence of calcium or glycine; the magnitude of which depends on aluminum concentration and temperature. Additionally, isomerization of the ε-Keggin-Al 13 to the γ-Keggin-Al 13 isomer was observed in the absence of calcium and glycine at elevated temperatures after several days. Furthermore, calcium and glycine were previously shown to enhance rates of γ-Keggin-Al 13 formation. 2.

27Al-NMR↗
DOE OSTI2024

Dirigent isoflavene-forming PsPTS2: 3D structure, stereochemical, and kinetic characterization comparison with pterocarpan-forming PsPTS1 homolog in pea

Pea (legume plant defense) phytoalexin pterocarpans (–)-maackiain and (+)-pisatin have opposite C6a and C11a configurations, but how this occurs biosynthetically is unknown. Herein, pea dirigent-protein (DP) PsPTS2, which generates 7,2'-dihydroxy-4',5'-methylenedioxyisoflav-3-ene (DMDIF), was investigated as regards stereoselectivity towards four possible 7,2'-dihydroxy-4',5'-methylenedioxyisoflavan-4-ol (DMDI) stereoisomers. Each DMDI stereoisomer configuration was determined using NMR spectroscopy, electronic circular dichroism, and molecular orbital analyses. PsPTS2 efficiently converted cis-(3R,4R)-DMDI into DMDIF, this being 20-fold faster than with the trans-(3R,4S)-isomer. The 4R-configured substrate’s near ß-axial OH orientation significantly enhanced its leaving group abilities in creating intermediate A-ring mono-quinone methide (QM), whereas the 4S-isomer’s 4-OH group α-equatorial orientation was a poorer leaving group. Substrate docking simulations also indicated that the 4R-configured ß-axial OH was closest to the Asp catalytic center, whereas the 4S-isomer’s α-equatorial OH was further away. Neither cis-(3S,4S)- nor trans-(3S, 4R)-DMDIs were substrates, even with the former having the same C3/C4 stereochemistry as (+)-pisatin. PsPTS2, assayed with cis-(3R,4R)-7,2'-dihydroxy-4'-methoxyisoflavan-4-ol [cis-(3R,4R)-DMI] and its C3/C4 stereoisomers, gave 2',7-dihydroxy-4'-methoxyisoflav-3-ene (DMIF), with the same substrate stereoselectivity. DP homologs may exist in licorice (Glycyrrhiza pallidiflora) and the tree legume Bolusanthus speciosus, as DMIF is found in both. PsPTS1 preferentially utilized cis-(3R,4R)-DMDI to give (–)-maackiain, this being 2200-fold more efficient than with cis-(3R,4R)-DMI. PsPTS1 also slowly converted trans-(3S,4R)-DMDI into (+)-maackiain, again reflecting the better 4R configured OH leaving group. Pea PsPTS2 and PsPTS1 provisionally provide a facile DP-engendered means to enable differing C6a and C11a configurations in (+)-pisatin and (–)-maackiain. Both DP transformations are considered to occur via DP-engendered generation of an identical mono-QM bound intermediate, which with PsPTS2 either re-aromatizes to give DMDIF or with PsPTS1 undergoes intramolecular cyclization to afford (–)-maackiain. Substrate docking simulations using PsPTS2 (2.5 Å resolution) and PsPTS1 (1.5 Å resolution) plausibly indicate that cis-(3R,4R)-DMDI binds in the anti-configuration in the PsPTS2 active site to afford DMDIF, and the syn-configuration in PsPTS1 to give maackiain.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

In-flight production of an isomeric beam of 16 N

In this work, an in-flight beam of 16 N was produced via the single-neutron adding ($\textit{d,p}$) reaction in inverse kinematics at the recently upgraded Argonne Tandem Linear Accelerator System (ATLAS) in-flight system. The amount of the 16 N beam which resided in its excited 0.120 MeV $J^\pi$ = 0 – isomeric state (T 1/2 ≈ 5 μs) was determined to be 40(5)% at a reaction energy of 7.9(3) MeV/$\textit{u}$, and 24(2)% at a reaction energy of 13.2(2) MeV/$\textit{u}$. The isomer measurements took place at an experimental station ≈ 30 m downstream of the production target and utilized an Al beam-stopping foil and a HPGe Clover detector. Composite 16 N beam rate determinations were made at the experimental station and the focal plane of the Argonne in-flight radioactive ion-beam separator (RAISOR) with Si ΔE-E telescopes. A Distorted Wave Born Approximation (DWBA) approach was coupled with the known spectroscopic information on 16 N in order to estimate the relative 16 N isomer yields and composite 16 N beam rates. In addition to the observed reaction-energy dependence of the isomer fraction, a large sensitivity to the angular acceptance of the recoils was also observed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Decay spectroscopy at the two-proton drip line: Radioactivity of the new nuclides 160 Os and 156 W

The radioactivity of $^{160}_{76}$Os 84 and $^{156}_{74}$W 82 that lie at the two-proton drip line has been measured in an experiment performed at the Accelerator Laboratory of the University of Jyväskylä. The 160 Os nuclei were produced using fusion-evaporation reactions induced by a beam of 310 MeV 58 Ni ions bombarding a 106 Cd target. The 160 Os ions were separated in flight using the recoil separator MARA and implanted into a double-sided silicon strip detector, which was used to measure their decays. The α decays of the ground state of 160 Os (Ε α = 7092(15) keV, t 1/2 = 97$^{+97}_{-32}$ μs) and its isomeric state (Ε α = 8890(10) keV, t 1/2 = 41$^{+15}_{-9}$ μs) were measured, allowing the excitation energy of the isomer to be determined as 1844(18) keV. These α-decay properties and the excitation energy of the isomer are compared with systematics. The α decays were correlated with subsequent decays to investigate the β decays of the ground state of 156 W, revealing that unlike its isotones, both low-lying isomers were populated in its daughter nuclide, 156 Ta. An improved value for the half-life of the proton-decaying high-spin isomeric state in $^{156}_{73}$Ta 83 of 333$^{+25}_{-22}$ ms was obtained in a separate experiment using the same experimental systems with a 102 Pd target. This result was employed to improve the precision of the half-life determined for 156 W, which was measured as 157$^{+57}_{-34}$ ms.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2020

The importance of frontier orbital symmetry in the adsorption of diiodobenzene on MoS 2 (0001)

Evidence of a role of frontier orbital symmetry, in the adsorption process of diiodobenzene on MoS 2 (0001), appears in the huge differences in the rate of adsorption between 1,3-diiodobenzene, 1,2-diiodobenzene and 1,4-diiodobenzene isomers on MoS2. Experiments indicate that the rate of adsorption of 1,3-diiodobenzene on MoS 2 (0001) is much greater than that of the 1,2-diodobenzene and 1,4-diiodbenzene isomers. As the differences in calculated diiodobenzene isomer-MoS 2 system adsorption energies and electron affinities are negligible, frontier orbital symmetry appears to play a significant role in diiodobenzene adsorption on MoS 2 (0001). Additionally, the experimental and theory results, in combination, suggest that a rehybridization requirement, forced by frontier orbital symmetry, comes at a cost of a reduced sticking coefficient. With the introduction of defects, which lower the adsorption site symmetry at the MoS 2 (0001) surface, the rate of 1,3-diiodobenzene adsorption on MoS 2 (0001) decreases, while the rates of 1,2-diodobenzene adsorption significantly increases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Influence of Terminal Carboxyl Groups on the Structure and Reactivity of Functionalized m-Carboranethiolate Self-Assembled Monolayers

The structure and function of self-assembled monolayers (SAMs) at the nanoscale are determined by the steric and electronic effects of their building blocks. Carboranethiol molecules form pristine monolayers that provide tunable two-dimensional systems to probe lateral and interfacial interactions. Additional ω-functionality, such as carboxyl groups, can be introduced to change the properties of the exposed surfaces. Here, two geometrically similar isomeric m-carborane analogues of m-mercaptobenzoic acid, 1-COOH-7-SH-1,7-C 2 B 10 H 10 and racem-1-COOH-9-SH-1,7-C 2 B 10 H 10 , are characterized and their SAMs on Au{111} are examined. The latter isomer belongs to the rare group of chiral cage molecules and becomes, to our knowledge, the first example assembled on Au{111}. Although different in symmetry, molecules of both isomers assemble into similar hexagonal surface patterns. The nearest-neighbor spacing of 8.4 ± 0.4 Å is larger than that of non-carboxylated isomers, consistent with the increased steric demands of the carboxyl groups. Computational modeling reproduced this spacing and suggests a tilt relative to the surface normal. However, tilt domains are not observed experimentally, suggesting the presence of strong lateral interactions. Analyses of the influence of the functional groups through the pseudo-aromatic m-carborane skeleton showed that the thiol group attached to either carbon or boron atoms increases the carboxyl group acidity in solution. In contrast, the acidity of the exposed carboxyl group in the SAMs decreases upon surface attachment; computational analyses suggest that the driving force of this shift is the dielectric of the environment in the monolayer as a result of confined intermolecular interactions, proximity to the Au surface, and partial desolvation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Competing Intermolecular and Molecule–Surface Interactions: Dipole–Dipole-Driven Patterns in Mixed Carborane Self-Assembled Monolayers

Carboranedithiol isomers adsorbing with opposite orientations of their dipoles on surfaces are self-assembled together to form mixed monolayers where both lateral dipole–dipole and lateral thiol–thiolate (S–H···S) interactions provide enhanced stability over single-component monolayers. Here, we demonstrate the first instance of the ability to map individual isomers in a mixed monolayer using the model system carboranedithiols on Au{111}. The addition of methyl groups to one isomer provides both an enhanced dipole moment and extra apparent height for differentiation via scanning tunneling microscopy (STM). Associated computational investigations rationalize favorable interactions of mixed pairs and the associated stability changes that arise from these interactions. Both STM images and Monte Carlo simulations yield similarly structured mixed monolayers, where approximately 10% of the molecules have reversed dipole moment orientations but no direct chemical attachment to the surface, leading to homogeneous monolayers with no apparent phase separation. Deprotonating the thiols by depositing the molecules under basic conditions eliminates the lateral S–H···S interactions while accentuating the dipole–dipole forces. The molecular system investigated is composed of isomeric molecules with opposite orientations of dipoles and identical surface packing, which enables the mapping of individual molecules within the mixed monolayers and enables analyses of the contributions of the relatively weak lateral interactions to the overall stability of the assemblies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Butyltin Keggin Ion with a Rare Four-Coordinate Ca Center

Alkyltin clusters are exploited in nanolithography for the fabrication of microelectronics. The alkyltin Keggin family is unique among Keggin clusters across the periodic table; its members appear to favor the lower-symmetry β and γ isomers rather than the highly symmetrical α and ε isomers. Therefore, the alkyltin Keggin family may provide important fundamental information about the formation and isomerization of Keggin clusters. In this study, we have synthesized and structurally characterized a new butyltin Keggin cluster with a tetrahedral Ca 2+ center, fully formulated [(BuSn) 12 (CaO 4 )(OCH 3 ) 12 (O) 4 (OH) 8 ] 2+ (β-CaSn 12 ). The synthesis is a simple one-step process. Extensive solution characterization including electrospray ionization mass spectrometry, small-angle X-ray scattering, and multinuclear ( 1 H, 13 C, and 119 Sn) nuclear magnetic resonance shows β-CaSn 12 is essentially phase-pure and stable. This differs from the previously reported Na-centered analogues that always form a mixture of β and γ isomers, with facile interconversion. Therefore, this study has clarified prior confusion over complex spectroscopic and crystallographic characterization of the Na-centered analogues. Density functional theory calculations showed the following stability order: γ-CaSn 12 < γ-NaSn 12 < β-CaSn 12 < β-NaSn 12 . The β analogue is always more stable than the γ analogue, consistent with experiment. Notable outcomes of this study include a rare tetrahedral Ca coordination, a Na-free alkyltin cluster (important for microelectronics manufacturing), and a better understanding of Keggin families built of different metal cations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Radical–Radical Reactions in Molecular Weight Growth: The Phenyl + Propargyl Reaction

The mechanism for hydrocarbon ring growth in sooting environments is still the subject of considerable debate. The reaction of phenyl radical (C 6 H 5 ) with propargyl radical (H 2 CCCH) provides an important prototype for radical–radical ring-growth pathways. We studied this reaction experimentally over the temperature range of 300–1000 K and pressure range of 4–10 Torr using time-resolved multiplexed photoionization mass spectrometry. We detect both the C 9 H 8 and C 9 H 7 + H product channels and report experimental isomer-resolved product branching fractions for the C 9 H 8 product. We compare these experiments to theoretical kinetics predictions from a recently published study augmented by new calculations. Here, these ab initio transition state theory-based master equation calculations employ high-quality potential energy surfaces, conventional transition state theory for the tight transition states, and direct CASPT2-based variable reaction coordinate transition state theory (VRC-TST) for the barrierless channels. At 300 K only the direct adducts from radical–radical addition are observed, with good agreement between experimental and theoretical branching fractions, supporting the VRC-TST calculations of the barrierless entrance channel. As the temperature is increased to 1000 K we observe two additional isomers, including indene, a two-ring polycyclic aromatic hydrocarbon, and a small amount of bimolecular products C 9 H 7 + H. Our calculated branching fractions for the phenyl + propargyl reaction predict significantly less indene than observed experimentally. We present further calculations and experimental evidence that the most likely cause of this discrepancy is the contribution of H atom reactions, both H + indenyl (C 9 H 7 ) recombination to indene and H-assisted isomerization that converts less stable C 9 H 8 isomers into indene. Especially at low pressures typical of laboratory investigations, H-atom-assisted isomerization needs to be considered. Regardless, the experimental observation of indene demonstrates that the title reaction leads, either directly or indirectly, to the formation of the second ring in polycyclic aromatic hydrocarbons.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Comparative Study of Neutral and Cationic Sn 2 H 2 : Toward Laboratory Detection of the Cation

Group 14 M 2 H 2 isomers (M = Si, Ge, Sn, and Pb) have attracted interest due to their radically differing electronic structures from acetylene. To better understand the Sn–H interactions of the neutral and cationic Sn 2 H 2 structures, we present the most rigorous study of these systems to date. CCSD(T)/cc-pwCVTZ harmonic frequencies are presented as the first predictions for the neutral and cationic species to date. CCSDT(Q)/CBS relative energies are reported using the focal point approach, confirming the butterfly isomer as the global minimum on the potential energy surface for both the neutral and cationic species. In all, there exist 7 minima and 15 transition states. NBO analysis is also performed to elucidate the changes in bond order going from neutral to cation across all isomers of Sn 2 H 2 . Our results provide insights into the important Sn–H interaction and provide guidance for future work that may detect Sn 2 H$^{+}_{2}$ in the laboratory for the first time.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Unraveling 1-Hexene Hydrogenation over Dilute Pd-in-Au Alloys

Dilute Pd-in-Au alloys are valuable materials for selectively hydrogenating alkynes and isomerizing alkenes. By diluting Pd in a Au host, the selectivity toward semihydrogenated alkene isomers can be significantly enhanced and the unfavorable overhydrogenation to alkanes is suppressed. However, a detailed mechanistic study on the origin of the enhanced alkene selectivity over dilute alloy catalysts is still missing. Here, we combine experiment and theory to unravel the reaction mechanism, identifying rate-limiting and selectivity-controlling steps in 1-hexene hydrogenation over dilute Pd-in-Au catalysts. Using isotope-exchange hydrogenation experiments, we show that 1-hexene and hydrogen over a bimetallic Pd4Au96 in silica catalyst preferentially form 1-hexene isomers, (trans and cis) 2- and 3-hexene and only a small amounts of hexane. The reaction is consistent with a Horiuti–Polanyi mechanism, similar to a monometallic Pd nanoparticle catalyst. Computation of the free-energy profiles for 1-hexene hydrogenation and isomerization over a single Pd atom in a Au surface using first principles calculations indicated that the isomerization of 1-hexene to 2-hexene is energetically favorable due to the relatively large barrier for H2 dissociation preventing hydrogenation to n-hexane. Microkinetic modeling established that H2 dissociation on the single-atom Pd sites and H spillover from these sites onto the Au host are rate-limiting and key in steering the selectivity of dilute Pd-in-Au alloys toward the hexene isomers. Furthermore, the mechanistic insights from this study contribute to the rational design of optimized dilute alloy catalysts for selective alkene isomerization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Mechanistic Studies of Ligand Substitution, Linkage Isomerism, and Insertion Reactions in Electron Rich Pd(II) Complexes of a Zwitterionic Diimine Ligand

We have prepared cationic palladium complexes possessing a new zwitterionic ligand bis-N,N’–1-(2,4,6-triphenylpyridyl) oxalamide [(N ^ N)Pd(Me)(L)] + [BArF] - , (BArF=3,5-(CF 3 ) 2 C 6 H 3 , L=NCMe, CO). The structure of [(N ^ N)Pd(Me)(CO)] + [BArF] - was determined by X-ray diffraction analysis. Energy Decomposition Analysis (EDA) indi-cates this N ^ N zwitterionic ligand is more electron-donating relative to bidentate diimine ligands. Low temperature NMR analysis shows the existence of linkage isomers with the N ^ N isomer the most stable. Structures were assigned using NMR and DFT analysis. Barriers to interconversion of isomers are ΔG ‡ = 10-12 kcal/mol. Kinetics of acetoni-trile displacement from [(N ^ N)Pd(Me)(NCCH 3 )] + [BArF] - by CD 3 CN, ethylene and t Bu 3 P were measured and mechanisms of exchange determined. The ethylene complex, [(N ^ N)Pd(Me)(C 2 H 4 )] + was generated at -45 °C, and the barrier of migrato-ry insertion determined at 0 °C (ΔG ‡ = 23.4 kcal/mol) and compared to related diimine complexes. The methyl carbonyl complex undergoes migratory insertion in the presence of CO at -70 to -55 °C (ΔG ‡ = ca. 15.7 kcal/mol) to yield the acyl carbonyl complex. Furthermore, the neutral bis-trimethylsilylmethyl complex [(N ^ N)Pd(CH 2 SiMe 3 ) 2 was prepared and characterized by X-ray diffraction analysis. It displays dynamic behavior at very low temperatures in the NMR spectrum (-90 °C, ΔG ‡ =7.9 kcal/mol) which, supported by DFT analysis, is ascribed to rotation of the bulky -CH 2 SiMe 3 groups.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗