Search NASA⌕ Search

SEARCH · Search NASA

Results for “lamellar”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Lipid sponge droplets as programmable synthetic organelles

Living cells segregate molecules and reactions in various subcellular compartments known as organelles. Spatial organization is likely essential for expanding the biochemical functions of synthetic reaction systems, including artificial cells. Many studies have attempted to mimic organelle functions using lamellar membrane-bound vesicles. However, vesicles typically suffer from highly limited transport across the membranes and an inability to mimic the dense membrane networks typically found in organelles such as the endoplasmic reticulum. Here, we describe programmable synthetic organelles based on highly stable nonlamellar sponge phase droplets that spontaneously assemble from a single-chain galactolipid and nonionic detergents. Due to their nanoporous structure, lipid sponge droplets readily exchange materials with the surrounding environment. In addition, the sponge phase contains a dense network of lipid bilayers and nanometric aqueous channels, which allows different classes of molecules to partition based on their size, polarity, and specific binding motifs. The sequestration of biologically relevant macromolecules can be programmed by the addition of suitably functionalized amphiphiles to the droplets. We demonstrate that droplets can harbor functional soluble and transmembrane proteins, allowing for the colocalization and concentration of enzymes and substrates to enhance reaction rates. Droplets protect bound proteins from proteases, and these interactions can be engineered to be reversible and optically controlled. Our results show that lipid sponge droplets permit the facile integration of membrane-rich environments and self-assembling spatial organization with biochemical reaction systems.

59 BASIC BIOLOGICAL SCIENCES↗

Enhancing ion transport in charged block copolymers by stabilizing low symmetry morphology: Electrostatic control of interfaces

Recently, the interest in charged polymers has been rapidly growing due to their uses in energy storage and transfer devices. Yet, polymer electrolyte-based devices are not on the immediate horizon because of the low ionic conductivity. In the present study, we developed a methodology to enhance the ionic conductivity of charged block copolymers comprising ionic liquids through the electrostatic control of the interfacial layers. Unprecedented reentrant phase transitions between lamellar and A15 structures were seen, which cannot be explained by well-established thermodynamic factors. X-ray scattering experiments and molecular dynamics simulations revealed the formation of fascinating, thin ionic shell layers composed of ionic complexes. The ionic liquid cations of these complexes predominantly presented near the micellar interfaces if they had strong binding affinity with the charged polymer chains. Therefore, the interfacial properties and concentration fluctuations of the A15 structures were crucially dependent on the type of tethered acid groups in the polymers. Overall, the stabilization energies of the A15 structures were greater when enriched, attractive electrostatic interactions were present at the micellar interfaces. Contrary to the conventional wisdom that block copolymer interfaces act as “dead zone” to significantly deteriorate ion transport, this study establishes a prospective avenue for advanced polymer electrolyte having tailor-made interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A twist grain boundary phase in aqueous solutions of the nucleic acid tetramer GTAC

At high concentration, long Watson/Crick (WC) double-helixed DNA forms columnar crystal or liquid crystal phases of linear, parallel duplex chains packed on periodic lattices. This can also be a structural motif of short NA oligomers such as the 5’-GTAC-3’ studied here, which makes four-base WC duplexes having hydrophobic blunt ends. End-to-end aggregation then assembles these duplexes into columns and columnar phases are stabilized, in spite of breaks in the double helix every four bases. But the new degrees of freedom introduced by such breaks also enable opportunities for a more diverse palette of self-assembly modes, producing striking self-assemblies of DNA that would not be achievable with contiguous polymers. These include recently reported three-dimensional (3D) periodic low-density nanoscale networks of GCCG, and the twist grain boundary (TGB) phase presented here. In the TGB, columns of GTAC pairs assemble into monolayer sheets in which the duplex columns are mutually parallel. However, unlike in the columnar crystals, these sheets stack in helical fashion into lamellar arrays in which the column axis of each layer is rotated through a 60° angle with respect to the columns in neighboring layers. This assembly of DNA is unique in that it the fills a 3D volume wherein the major grooves of columns in each layer mutually enter and interlock with the major grooves of columns in neighboring layers. This locking is optimized by small adjustments in structure enabled by the breaks in the duplex backbones.

DNA↗

Beyond the eutectic paradigm: nanolamellar patterns in a rapidly solidified peritectic alloy

Peritectic transformations are central to many structural alloys, yet pattern formation remains poorly understood due to complex growth dynamics and limited three-dimensional data. Here, we report an unusual two-phase microstructure in a Zn–Ag peritectic alloy subjected to rapid solidification by laser surface remelting. Synchrotron X-ray nanotomography reveals a lamellar structure of primary 𝜀-AgZn 3 and peritectic Zn with ∼700 nm spacing. Although resembling a eutectic morphology, this pattern forms without a eutectic reaction through non-steady coupled growth from the liquid. SEM and TEM-EDS confirm interface shapes and phase compositions. These findings expand the design space of peritectics for refined microstructural control.

36 MATERIALS SCIENCE↗

A combined TEM and SAXS study of the growth and self-assembly of ultrathin Pt nanowires

Ultrathin Pt nanowires possess high activity for various electrocatalytic applications. However, little work has focused on understanding their growth mechanisms. Herein, we utilize a combination of time-dependent, ex situ transmission electron microscopy (TEM) and small angle x-ray scattering (SAXS) techniques to observe the growth process in addition to associated surfactant-based interactions. TEM images indicate that initially nanoparticles are formed within 30 s; these small 'seed' particles quickly elongate to form ultrathin nanowires after 2 min. These motifs remain relatively unchanged in size and shape up to 480 min of reaction. Complementary SAXS data suggests that the initial nanoparticles, which are coated by a surfactant bilayer, arrange into a bcc superlattice. With increasing reaction time, the bcc lattice disappears as the nanoparticles grow into nanowires, which then self-assemble into a columnar hexagonal structure in which the individual nanowires are covered by a CTAB monolayer. The hexagonal structure eventually degrades, thereby leading to the formation of lamellar stacking phases comprised of surfactant bilayers. To the best of our knowledge, this is the first time that SAXS has been used to monitor the growth and self-assembly of Pt nanowires. In conclusion, these insights can be used to better understand and rationally control the formation of anisotropic motifs of other metallic nanostructures.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Three interaction energy scales in the single-layer high-$T_c$ cuprate HgBa 2 CuO 4+δ

The lamellar cuprate superconductors exhibit the highest ambient-pressure superconducting transition temperatures ($T_c$), and after more than three decades of extraordinary research activity, continue to pose formidable scientific challenges. A major experimental obstacle has been to distinguish universal phenomena from materials- or technique-dependent ones. Angle-resolved photoemission spectroscopy (ARPES) measures momentum-dependent single-particle electronic excitations and has been invaluable in the endeavor to determine the anisotropic momentum-space properties of the cuprates. HgBa 2 CuO 4+δ (Hg1201) is a single-CuO 2 -layer cuprate with a particularly high optimal Tc and a simple crystal structure, yet there exists little information from ARPES about the electronic properties of this model system. In this paper we present an ARPES study of doping-, temperature-, and momentum-dependent systematics of near-nodal dispersion anomalies in Hg1201. The data reveal a hierarchy of three distinct energy scales: a subgap low-energy kink, an intermediate-energy kink near 55 meV, and a peak-dip-hump structure. The first two features are attributed to the coupling of electrons to Ba-derived optical phonons and in-plane bond-stretching phonons, respectively. The nodal peak-dip-hump structure appears to have a common doping dependence in several single-layer cuprates and is interpreted as a manifestation of pseudogap physics at the node. These results establish several universal phenomena, both in terms of connecting multiple experimental techniques for a single material and in terms of connecting comparable spectral features in multiple structurally similar cuprates.

36 MATERIALS SCIENCE↗

Microemulsions in the driven Widom-Rowlinson lattice gas

An investigation of the two-dimensional Widom-Rowlinson lattice gas under an applied drive uncovered a remarkable nonequilibrium steady state in which uniform stripes (reminiscent of an equilibrium lamellar phase) form perpendicular to the drive direction [R. Dickman and R. K. P. Zia, Phys. Rev. E 97, 062126 (2018)]. Here we study this model at low particle densities in two and three dimensions, where we find a disordered phase with a characteristic length scale (a “microemulsion”) along the drive direction. Further we develop a continuum theory of this disordered phase to derive a coarse-grained field-theoretic action for the nonequilibrium dynamics. The action has the form of two coupled driven diffusive systems with different characteristic velocities, generated by an interplay between the particle repulsion and the drive. We then show how fluctuation corrections in the field theory may generate the characteristic features of the microemulsion phase, including a peak in the static structure factor corresponding to the characteristic length scale. This work lays the foundation for understanding the stripe phenomenon more generally.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Stable and unstable tiling patterns formed by ABC miktoarm star triblock terpolymers of symmetric interactions

Several discrepancies exist among previous self-consistent field calculations of symmetrically interacting ABC miktoarm star triblock terpolymer melts. Here we address this issue by including all known tiling patterns, as well as several lamellar-type phases known to bound the regions in the parameter space occupied by these patterns. After carefully studying the effect of numerical parameters on the free-energy accuracy, the central region of the phase diagram is constructed in detail; both the (3.4.6.4) pattern and the three-dimensional phase of hierarchical-hexagonal lamellae are found to be stable for the first time. The energetic and entropic contributions to the free-energy density of several phases are analyzed and compared in detail to reveal their stability mechanisms, including the important ( 3 2 .4.3.4) pattern. Comparisons to previous studies of the same model system are present throughout, with our results resolving the aforementioned discrepancies and providing a sound basis for future work to build upon. Published by the American Physical Society 2024

Materials Science↗

Parity breaking at faceted crystal growth fronts during ice templating

Directional solidification of water-based solutions has emerged as a versatile technique to template hierarchical porous materials, but this nonequilibrium process remains incompletely understood. Here, in this study, we use phase-field simulations to shed light on the mechanism that selects the growth direction of the lamellar ice structure that templates those materials. Our results show that this selection can be understood within the general framework of spontaneous parity breaking, yielding quantitative predictions for the tilt angle of lamellae with respect to the thermal axis. The results provide a theoretical basis to interpret a wide range of experimental observations.

Materials science↗

Desmearing small-angle scattering data by central moment expansions of instrument resolution

This study introduces an enhanced numerical technique tailored specifically for refining 1D small-angle scattering (SAS) intensity profiles affected by smearing. Our primary objective is to address the resolution blurring commonly encountered in SAS data, particularly in systems with clearly defined correlation peaks whose spread aligns with the width of the resolution function at corresponding Q positions. Unlike previous approaches that expanded the SAS intensity using central moment expansion, the new method focuses on expanding the resolution function itself, thus eliminating artificial oscillations observed in smeared spectra due to limitations inherent in our earlier algorithm. This method is straightforward to implement, computationally efficient and consistently performs well in numerical benchmarking. To illustrate its effectiveness, we present a case study of a lamellar phase characterized by distinct peaks in its small-angle neutron scattering intensities.

central moment expansions↗

Assessment of Directionally Solidified Eutectic Sm–Fe(Co)–Ti Alloys as Permanent Magnet Materials

Sm–Fe–Ti and Sm–Fe0.8Co0.2–Ti alloys were prepared via arc-melting and directionally solidified on a water-cooled copper hearth. The as-solidified alloys featured cells of the Sm(Fe,Co,Ti)12–Ti(Fe,Co) 2+δ –(α-Fe) lamellar eutectic. The lamellae of Sm(Fe,Co,Ti)12 phase with a crystal structure of the ThMn12 type were less than 0.2 μm thick, and had their [001] easy-magnetization directions oriented along the temperature gradient of the solidification. The eutectic microstructure led to an increased coercivity, especially in the Co-added alloys. Below 250 °C, this coercivity was found not to vary much with temperature with a temperature coefficient of -0.18 %/°C. However, the modest absolute values, reaching only 0.7 kOe, are insufficient for utilization of the directionally solidified alloys as anisotropic permanent magnets.

36 MATERIALS SCIENCE↗

Bone resorption and formation in the pedicles of European roe deer ( Capreolus capreolus ) in relation to the antler cycle—A morphological and microanalytical study

We analyzed pedicle bone from roe bucks that had died around antler casting or shortly before or during the rutting period. Pedicles obtained around antler casting were highly porous and showed signs of intense osteoclastic activity that had caused the formation of an abscission line. Following the detachment of the antler plus a portion of pedicle bone, osteoclastic activity in the pedicles continued for some time, and new bone was deposited onto the separation plane of the pedicle stump, leading to partial pedicle restoration. Pedicles obtained around the rutting period were compact structures. The newly formed, often very large secondary osteons, which had filled the resorption cavities, exhibited a lower mineral density than the persisting older bone. The middle zones of the lamellar infilling frequently showed hypomineralized lamellae and enlarged osteocyte lacunae. This indicates a deficiency in mineral elements during the formation of these zones that occurred along with peak antler mineralization. We suggest that growing antlers and compacting pedicles compete for mineral elements, with the rapidly growing antlers being the more effective sinks. The competition between the two simultaneously mineralizing structures is probably more severe in Capreolus capreolus than in other cervids. This is because roe bucks regrow their antlers during late autumn and winter, a period of limited food and associated mineral supply. The pedicle is a heavily remodeled bone structure with distinct seasonal variation in porosity. Pedicle remodeling differs in several aspects from the normal bone remodeling process in the mammalian skeleton.

59 BASIC BIOLOGICAL SCIENCES↗

Granal thylakoid structure and function: explaining an enduring mystery of higher plants

Summary In higher plants, photosystems II and I are found in grana stacks and unstacked stroma lamellae, respectively. To connect them, electron carriers negotiate tortuous multi‐media paths and are subject to macromolecular blocking. Why does evolution select an apparently unnecessary, inefficient bipartition? Here we systematically explain this perplexing phenomenon. We propose that grana stacks, acting like bellows in accordions, increase the degree of ultrastructural control on photosynthesis through thylakoid swelling/shrinking induced by osmotic water fluxes. This control coordinates with variations in stomatal conductance and the turgor of guard cells, which act like an accordion's air button. Thylakoid ultrastructural dynamics regulate macromolecular blocking/collision probability, direct diffusional pathlengths, division of function of Cytochrome b 6 f complex between linear and cyclic electron transport, luminal pH via osmotic water fluxes, and the separation of pH dynamics between granal and lamellar lumens in response to environmental variations. With the two functionally asymmetrical photosystems located distantly from each other, the ultrastructural control, nonphotochemical quenching, and carbon‐reaction feedbacks maximally cooperate to balance electron transport with gas exchange, provide homeostasis in fluctuating light environments, and protect photosystems in drought. Grana stacks represent a dry/high irradiance adaptation of photosynthetic machinery to improve fitness in challenging land environments. Our theory unifies many well‐known but seemingly unconnected phenomena of thylakoid structure and function in higher plants.

59 BASIC BIOLOGICAL SCIENCES↗

Tunable structural color of bottlebrush block copolymers through direct-write 3D printing from solution

Additive manufacturing of functional materials is limited by control of microstructure and assembly at the nanoscale. In this work, we integrate nonequilibrium self-assembly with direct-write three-dimensional (3D) printing to prepare bottlebrush block copolymer (BBCP) photonic crystals (PCs) with tunable structure color. After varying deposition conditions during printing of a single ink solution, peak reflected wavelength for BBCP PCs span a range of 403 to 626 nm (blue to red), corresponding to an estimated change in d-spacing of >70 nm (Bragg- Snell equation). Physical characterization confirms that these vivid optical effects are underpinned by tuning of lamellar domain spacing, which we attribute to modulation of polymer conformation. Using in situ optical microscopy and solvent-vapor annealing, we identify kinetic trapping of metastable microstructures during printing as the mechanism for domain size control. More generally, we present a robust processing scheme with potential for on-the-fly property tuning of a variety of functional materials.

36 MATERIALS SCIENCE↗

Dynamic control of molecular transport MXene transistor membranes

Controlled spatial confinement and surface properties of lamellar 2D nanomaterial membranes could enhance many precision separation processes. Traditionally, researchers view channel dimensions, surface properties, and permeation rates of these membranes as intrinsic properties that cannot be modulated in operando. We report that gate voltage applied to the conducting laminar MXene membrane can modulate the permeation rate of ions and neutral solutes, as well as its effective size rejection. In operando wide-angle x-ray scattering measurements reveal that these changes are not driven by electrically induced variations in the d spacing of the MXene layers. Instead, experimental data and continuum electrokinetic modeling reveal that ion transport through the MXene channels is primarily affected by Donnan equilibrium at the membrane-solution interface. We also report a strong increase in the permeation rates through the membrane under a low-frequency ac voltage gating regime that we attribute to diffusioosmotic flow oscillations induced in the membrane. Overall, MXene “transistor” membranes provide a previously unidentified approach to dynamic control of molecular separations.

Pendse, Aaditya [Lawrence Livermore National Labor↗

Jeankempite, Ca 5 (AsO 4 ) 2 (AsO 3 OH) 2 (H 2 O) 7 , a new arsenate mineral from the Mohawk Mine, Keweenaw County, Michigan, USA

Abstract Jeankempite, Ca 5 (AsO 4 ) 2 (AsO 3 OH) 2 (H 2 O) 7 , is a new mineral species (IMA2018-090) discovered amongst coatings of arsenate minerals on oxidised copper arsenides from the Mohawk No. 2 mine, Mohawk, Keweenaw County, Michigan, USA. The new mineral occurs as lamellar bundles of colourless to white plates up to 1 mm wide and is visually indistinguishable from guérinite, with which it forms intergrowths. Jeankempite is transparent to translucent with a waxy lustre and white streak, is non-fluorescent under longwave and shortwave ultraviolet illumination, has a Mohs hardness of ~1.5 and brittle tenacity with uneven fracture. Crystals are flattened on {01 $\bar{1}$ } and exhibit perfect cleavage on {01 $\bar{1}$ }. Optically, jeankempite is biaxial (+), α = 1.601(2), β = 1.607(2), γ = 1.619(2) (white light); 2V meas. = 72(2)° and 2V calc. = 71.0°. The empirical formula is (Ca 4.97 Na 0.013 Mg 0.017 )(As 3.99 S 0.01 ) 4 O 23 H 16 , based on 23 O and 16 H atoms per formula unit. Thermogravimetric analysis indicates that jeankempite undergoes four weight losses totalling 16.82%, close to the expected loss of 16.30%, corresponding to eight H 2 O. Jeankempite is triclinic, P $\bar{1}$ , a = 6.710(6), b = 14.901(14), c = 15.940(15) Å, α = 73.583(12)°, β = 81.984(12)°, γ = 82.754(12)°, V = 1507(2) Å 3 and Z = 3. The final structure was refined to R 1 = 0.0591 for 2781 reflections with I obs > 3σ I . The crystal structure of jeankempite is built from a network of edge- and vertex-sharing CaO 6 , CaO 7 and AsO 4 polyhedra, and we hypothesise that the new mineral has formed due to a topotactic reaction brought on by dehydration of preexisting guérinite.

Mineralogy↗

Additive manufacturing of high-strength multiphase nanostructures in the binary Ni–Nb system for the discovery of new types of superalloys

Abstract Ni-based superalloys have been studied extensively due to their impressive mechanical properties, including strength and creep resistance at high temperatures. Growing interest surrounding additive manufacturing (AM) methods has led to recent investigations of alloys that are traditionally difficult to process, including Ni-based superalloys. Recent work has shown that AM methods enable high-throughput materials discovery and optimization of difficult- or impractical-to-process alloys, including those with high or even majority refractory element compositions. This work focuses on AM-enabled investigations of composition-dependent mechanical and microstructural properties for Ni–Nb binary alloys. Specifically, we report on the mechanical behavior of compositionally-graded Ni x Nb 1− x and uniform composition Ni 59.5 Nb 40.5 specimens made with AM. The AM fabrication process resulted in extraordinarily high strength, attributed to the formation of a dual-phase microstructure consisting of δ-Ni 3 Nb and µ-Ni 6 Nb 7 intermetallic compounds with nanostructured and multimodal grain size and eutectic lamellar spacing. Graphic Abstract

Jones, M. R.↗

Dual microscopy to explore enhanced atmospheric ice nucleation on multi-component aerosols

Using an optical microscopy setup adapted to in-situ studies of ice formation at ambient pressure, we examined a specific multicomponent mineral, microcline, with the ultimate aim of gaining a more realistic understanding of ice nucleation in Earth’s atmosphere. We focused on a perthitic feldspar, microcline, to test the hypothesis that co-existence in some feldspars of K-rich and Na-rich phases are contributing to enhanced ice nucleation. On a sample deliberately chosen to contain lamella, a typical perthitic microstructure, and flat surface regions next to each other, we performed a series of ice formation experiments. We found microcline to promote ice formation, causing a large number of ice nucleation events at around - 27°C. The number of ice nuclei decreased from experimental run to experimental run, indicating surface aging upon repeated exposure to humidity. An analysis of 10 experimental runs of identical conditions did not reveal an obvious enhancement of ice formation at the lamellar microstructure. Instead, we find efficient nucleation at various surface sites that produce orientationally aligned ice crystallites with asymmetric shape. Based on this observation we propose that surface steps running along select directions produce microfacets of an orientation that is favorable to enhanced ice nucleation, similar to previously reported for K-rich feldspars.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗