Search NASA⌕ Search

SEARCH · Search NASA

Results for “location optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Optimizing tuning masses for helicopter rotor blade vibration reduction including computed airloads and comparison with test data

An optimization procedure is developed for locating tuning masses on a rotor blade so that vibratory loads are minimized and hub-shear harmonics are reduced without adding a large mass penalty. The airloads are computed by means of a helicopter analysis for the cases of three vs six tuning masses, with attention given to the prediction of changes in airloads. Frequencies, airloads, and hub loads are computed with the CAMRAD/JA helicopter analysis code and the Conmin general-purpose optimization program. The hub shear is found to be significantly reduced in both cases with the added mass, and the reduction of hub shear is demonstrated under three flight conditions. Comparisons with wind-tunnel data demonstrate that the correlation of mass location is good and the relationship between mass location and flight speed is predicted well by the model.

Pritchard, Jocelyn I.↗
NASA NTRSDate not supplied

Comparison of Acoustic Models and Trajectory Generation Methods for an Acoustically-Aware Aircraft

Motivation - Noise management is one of the major barriers to Urban Air Mobility - Approaches to noise mitigation (non-exhaustive) - Vehicle configuration - Directivity control via propeller phase synchronization - Trajectory optimization Objective - Create framework for trajectory generation integrating location-based acoustic metrics and vehicle performance limitations - Multiple trajectory optimization methods and acoustic noise models - Mission-relevant constraints - Mission duration, airspace restrictions, ... - Vehicle dynamic constraints - Aircraft structural limitations, min/max airspeed, ... - Vehicle separation/obstacle avoidance - Acoustic constraints at a number of discrete observer locations

Kasey A. Ackerman↗
NASA NTRSDate not supplied

Comparison of Acoustic Models and Trajectory Generation Methods for an Acoustically-Aware Aircraft

Motivation - Noise management is one of the major barriers to Urban Air Mobility - Approaches to noise mitigation (non-exhaustive) - Vehicle configuration - Directivity control via propeller phase synchronization - Trajectory optimization Objective - Create framework for trajectory generation integrating location-based acoustic metrics and vehicle performance limitations - Multiple trajectory optimization methods and acoustic noise models - Mission-relevant constraints - Mission duration, airspace restrictions, ... - Vehicle dynamic constraints - Aircraft structural limitations, min/max airspeed, ... - Vehicle separation/obstacle avoidance - Acoustic constraints at a number of discrete observer locations

Kasey A Ackerman↗
NASA NTRS1989

Structural damage assessment as an identification problem

Damage assessment of structural assemblies is treated as an identification problem. A brief review of identification methods is first presented with particular focus on the output error approach. The use of numerical optimization methods in identifying the location and extent of damage in structures is studied. The influence of damage on eigenmode shapes and static displacements is explored as a means of formulating a measure of damage in the structure. Preliminary results obtained in this study are presented and special attention is directed at the shortcomings associated with the nonlinear programming approach to solving the optimization problem.

Hajela, Prabhat↗
NASA NTRSDate not supplied

Reducing the Noise Impact of Small Aircraft through Indirect Trajectory Optimization

This research examined the feasibility of incorporating an acoustic metric into the optimization of an aircraft trajectory to reduce the noise experienced by an observer. The method investigated a perturbed path of an unmanned aerial system with specified boundary conditions on position and velocity while maintaining a nominal flight speed. An acoustic model based on Gutin’s work was developed to estimate propeller noise as a function of flight parameters, propulsion characteristics, and spatial location. A trajectory was then optimized a priori to reduce the noise experienced by an observer. Multiple simulations were performed and results showed that integrating an acoustic metric into the path planning process could be used to reduce the noise impact on an observer with no perturbation to the nominal flight speed.

Matthew B Galles↗
NASA NTRS1987

Simultaneous structure/control optimization of large flexible spacecraft

This paper presents an approach to the simultaneous optimal design of a structure and control system for large flexible spacecrafts based on realistic objective function and constraints. The weight or total cost of structure and control system is minimized subject to constraints on the magnitude of response to a given disturbance involving both rigid-body and elastic modes. A nested optimization technique is developed to solve the combined problem. As an example, simple beam-like spacecraft under a steady-state white-noise disturbance force is investigated and some results of optimization are presented. In the numerical examples, the stiffness distribution, the location of controller and the control gains are optimized. Direct feedback control and linear quadratic optimal control laws are used with both inertial and non-inertial disturbing force. It is shown that the total cost is sensitive to the overall structural stiffness so that a simultaneous optimization of the structure and control system is indeed useful.

Onoda, Junjiro↗
NASA NTRS1980

Global optimality of extremals: An example

The question of the existence and location of Darboux points is crucial for minimally sufficient conditions for global optimality and for computation of optimal trajectories. A numerical investigation is presented of the Darboux points and their relationship with conjugate points for a problem of minimum fuel, constant velocity, and horizontal aircraft turns to capture a line. This simple second order optimal control problem shows that ignoring the possible existence of Darboux points may play havoc with the computation of optimal trajectories.

Kreindler, E.↗
NASA NTRS2019

Design and Acoustic Efficacy of a Broadband Liner for the Inlet of the DGEN Aero-Propulsion Research Turbofan

Advanced fan designs (including higher bypass ratios) and shorter engine nacelles have highlighted a need for increased fan noise reduction over a broader frequency range. With these observations in mind, an acoustic liner optimization process has been developed to achieve improved broadband liner designs. A series of advanced liner design studies at increasing technology readiness levels have been conducted as the overall optimization methodology has been enhanced. As part of the analysis, the overall design and evaluation capability was extended such that external observer locations may be included in the optimization process. This enhancement will provide a much wider design space in designing advanced broadband liners. In this work, further validation was pursued through the fabrication and testing of two liner designs for the NASA Glenn DGEN Aero-propulsion Research Turbofan (DART). The DART was used to document the efficacy of acoustic liners installed in the inlet of the DGEN380. An advanced Multi-Degree of Freedom Liner was designed, fabricated, and tested, along with a traditional Single-Degree-of-Freedom Liner, and those results compared to a hardwall baseline inlet. Farfield acoustic data were acquired from and external array, evaluated and reported herein terms of overall, broadband, and tonal components of the insertion loss. The predicted attenuation results generally matched expected trends of the measured data for the conditions considered.

Liners↗
NASA NTRSDate not supplied

Wi-Fi Signal Survey of the International Space Station by Autonomous Free-Flying Robot

This paper analyzes Wi-Fi signal propagation inside pressurized modules of the International Space Station (ISS). Various flight datasets were collected by the Astrobee fleet of autonomous free-flying robots developed by the NASA Ames Research Center (ARC). The enclosed module spaces of the ISS pose unique challenges for Wi-Fi signal propagation, and understanding these challenges is crucial for optimizing connectivity in such environments. The survey data presented are valuable for optimizing wireless access point (WAP) locations and conditions. A computational method is developed to analyze the wireless communication system, RF coverage, and module compositions. The method is both rigorous and practical for assessing the ISS wireless system performance. The computational tools in this paper serve as a complementary approach to direct, on-orbit measurements, which is a complicated and expensive task. In some operational scenarios, ground measurements may be intractable due to the size of the spacecraft. Results from this research will aid future space missions and commercial spacecraft, providing insights into optimal WAP placements and robust wireless communication systems.

Astrobee↗
NASA NTRSDate not supplied

Wi-Fi Signal Survey of the International Space Station by Autonomous Free-Flying Robot

This paper analyzes Wi-Fi signal propagation inside pressurized modules of the International Space Station (ISS). Various flight datasets were collected by the Astrobee fleet of autonomous free-flying robots developed by the NASA Ames Research Center (ARC). The enclosed module spaces of the ISS pose unique challenges for Wi-Fi signal propagation, and understanding these challenges is crucial for optimizing connectivity in such environments. The survey data presented are valuable for optimizing wireless access point (WAP) locations and conditions. A computational method is developed to analyze the wireless communication system, RF coverage, and module compositions. The method is both rigorous and practical for assessing the ISS wireless system performance. The computational tools in this paper serve as a complementary approach to direct, on-orbit measurements, which is a complicated and expensive task. In some operational scenarios, ground measurements may be intractable due to the size of the spacecraft. Results from this research will aid future space missions and commercial spacecraft, providing insights into optimal WAP placements and robust wireless communication systems.

International Space Station↗
NASA NTRS1990

Sensor/actuator placement for flexible space structures

A new approach for the placement of sensors and actuators in the active control of flexible space structures is developed. The approach converts the discrete nature of the sensor and actuator positioning problem to a nonlinear programming optimization through approximation of the control forces and output measurements by spatially continuous functions. The locations of the sensors and actuators are optimized in order to move the transmission zeros of the system farther to the left of the imaginary axis. The criterion for sensor/actuator placement can be quite useful for optimal regulation and tracking problems, as well as for low-authority controller designs. Two performance metrics are considered for the optimization and are applied to the sensor/actuator positioning of a large-order flexible space structure.

Maghami, P. G.↗
NASA NTRS1991

Design of a blade-stiffened composite panel with a hole

A procedure is developed analytically to design and produce an optimized stiffened panel with a centrally located hole. The PASCO panel-buckling analysis and sizing code is employed with the Engineering Analysis Language (EAL) code for finite-element analysis to optimize the design variables. Important design considerations are stiffener height and ply thicknesses in the skin and the stiffener laminates. The EAL code calculates the maximum strains around the hole boundary, and the resulting constraints are combined with the buckling constraint developed by the PASCO code. Cooptimization of the two codes is effected until convergence on the optimal solution is achieved. Results of the analytical procedure are experimentally verified by applying a compressive end-load to graphite-fiber laminated plates with center holes. The experimental results support the analytical procedure, and it is found that for the same weight, the soft-skin designs tested are found to have the best tolerance characteristics and resistance to failure.

Nagendra, S.↗
NASA NTRS1999

Time of Arrival Retrievals on an Oblate Spheroidal Earth

The current National Lightning Detection Network (NLDN) retrieval algorithm is based on a chi sq minimization. This numerical approach finds the lightning ground strike location on an ellipsoidal Earth that optimally agrees with multiple station time of arrival (TOA) measurements and, if available, magnetic bearing data. In addition, an analytic solution for determining lightning ground strike locations on a spherical Earth using only TOA data has been recently introduced. In the current work, a quasi-analytic approach is suggested for determining lightning ground strike locations on an oblate spheroidal Earth by perturbing the spherical model results proposed by Koshak. Latitude, longitude, time, and the associated perturbed quantities are related through terms in a Taylor series. The correction terms may be considered collectively as a vector which may be calculated by an overconstrained inversion. Expressions for the derivatives contained in the Taylor series are given in terms of elliptic integrals.

Solakiewicz, Richard J.↗
NASA NTRS1978

An optimum PN code search technique for a given apriori signal location density

A method is presented for optimizing (minimizing) the acquisition time for a PN-type spread spectrum system when the a priori probability density function is not uniform. For an assumed a priori Gaussian density function, calculations show that the acquisition time, when the 0.5 probability acquisition time is used as a measure of acquisition time, is reduced by 40% for a cell detection probability of 0.25 and when three sweeps are used. For the same parameters and with four sweeps the acquisition time is reduced by 41%. When the acquisition time probability is set to 0.9 instead of 0.5, the reduction is 25% of the uniform sweep time.

Holmes, J. K.↗
NASA NTRS1963

OPTIMAL SEARCH PROCEDURES

Optimization of search procedures for locating a lost satellite using wide and narrow radar scanning beams

TRACKING RADAR↗
NASA NTRS1973

Eutectic superalloys strengthened by sigma, Ni3CB lamellae and gamma prime, Ni3Al precipitates

By means of a screening and solidification optimization study of certain alloys located on the gamma-sigma liquidus surface within the Ni-Cb-Cr-Al system, alloys with high temperature properties superior to those of all known superalloys were defined. One alloy, Ni - 19.7w/o Cb - 6.0w/o Cr - 2.5w/o Al, directionally solidified at 3 cm/hr met or exceeded each program goal. A second alloy, Ni-21.75 w/o Cb-2.55 w/o Al, although deficient in its inherent oxidation resistance, met the other program goals and combined a remarkable insensitivity of composite microstructure to solidification parameters with excellent low temperature toughness. This investigation demonstrated that useful properties for gas turbine airfoil application have been achieved by reinforcing a strong and tough gamma solid solution matrix containing precipitated gamma prime by a lamellar intermetallic compound Ni3 Cb having greater strength at elevated temperature.

Lemkey, F. D.↗
NASA NTRS1975

Design of structures for optimum geometry

A method is presented for configuration optimization of finite element structures, given a reasonable initial geometry. The objective is to minimize weight or cost. Design variables include geometric as well as member sizing parameters. The number of elements and joints, and the element-joint relationships are prescribed and are not changed during the optimization process. However, the joint locations are changed. The structure is assumed to be linearly elastic and may be statically indeterminate. Multiple loading conditions are allowed. Constraints include limits on stiffness as well as strength. The method is demonstrated with application to truss design, subject to minimum size, strength, buckling, and displacement constraints. Major design improvements are achieved through configurations changes.

Vanderplaats, G. N.↗
NASA NTRS1976

Thermodynamic cycle analysis

An analysis was made of Rankine cycle efficiency in nuclear power plants with and without reheat capabilities. In addition, temperatures and pressures at certain selected locations were carried out to optimize plant efficiency. It was determined that plant efficiency without reheat was 39.03%, with reheat, a maximum efficiency of 4.44% was obtained at a pressure of 435.12 psia. Data also indicate efficiency appears to increase for pressures greater than 720 psia. However, higher pressures cannot be used because calculations indicate these pressure reheat temperatures exceed 1650 R, which is not allowed due to material limitations.

Source record↗