SEARCH · Search NASA
Results for “loop”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A Hardware-in-the-Loop Experimental Testbed Using Air Conditioners for Grid Balancing
Driven by the need to offset the variability of renewable generation on the grid, development of load control is a highly active field of research. However, practical use of residential loads for grid balancing remains rare, in part due to the cost of communicating with large numbers of small loads and also the limited experimentation done so far to demonstrate reliable operation. To establish a basis for the safe and reliable use of fleets of compressor loads as distributed energy resources, we constructed an experimental testbed in a laboratory, so that load coordination schemes could be tested at extreme conditions. Here, this experimental testbed was used to tune a simulation testbed to which it was then linked, thereby augmenting the effective size of the fleet. Modeling of the system was done both to demonstrate the experimental testbed's behavior and also to understand how to tune the behavior of each load. Implementing this testbed has enabled rapid turnaround of experiments on various load control algorithms, and year-round testing without the constraints and limitations arising in seasonal field tests with real houses. Experimental results show the practical feasibility of an ensemble of small loads contributing to grid balancing.
Evaluating Thermostats' Deadbands Using HVAC Hardware-In-the-Loop Experiment for Advanced Control Strategies
Smart thermostats have gained significant popularity due to their potential for optimizing energy consumption and enhanced user control while ensuring occupants' comfort. The deadband, also referred to as temperature differential, is defined as the temperature difference between the desired setpoint and upper threshold or lower threshold for the HVAC equipment to turn on. It is a key factor influencing energy efficiency and user satisfaction. This paper presents a comparative analysis of the deadbands of five different smart thermostats, tested with a heat pump, aiming to identify variations in their deadband settings and implications for energy management. The experimental study was conducted using a HVAC hardware-in-theloop (HIL) system that integrates smart thermostats with physical HVAC equipment in a simulated house environment. The study explores the trade-offs between energy efficiency and occupant comfort and highlights how different thermostats participating in demand response event cycle differently based on their deadband settings. The findings offer valuable insights into how selecting the right thermostat or configuring smart thermostat with appropriate deadband settings can be leveraged to enhance demand response capabilities, shift loads effectively and improve operational flexibility in HVAC systems.
NIOBIUM-1% ZIRCONIUM, NATURAL-CIRCULATION, BOILING-POTASSIUM CORROSION LOOP TEST
Explore the source record for details and available documents.
HYDRODYNAMIC TESTING OF ZIRCALOY TO STEEL HUB COUPLINGS FOR USE IN ADVANCED TEST REACTOR I-LOOP TUBE
The ATR I-positions' isolation from the flux trap region provides an opportunity for a test facility that could create conditions representative of commercial light water reactors. Such a facility requires piping couplings and joints that withstand extreme thermal and pressure cycling. Also, transitioning from steel to zircaloy piping inside the reactor vessel allows the neutronic properties of zircaloy to be leveraged while using cost-effective stainless steel outside of the core. Grayloc-style hub couplings will act as transition points between stainless steel piping and zircaloy piping inside the reactor vessel. These couplings have not been sufficiently tested for leakage where there is a transition between materials. This transition is a concern because the thermal expansion coefficients of the materials differ. Seal integrity between the two components may be greatly affected by thermal expansion at the connection. Thus, the effect of thermal cycling must be assessed. Thermal and pressure cycling and hydrodynamic testing will be conducted to verify seal integrity of the steel to zircaloy hub coupling when subjected to ATR conditions.
Evaluating Thermostats' Deadbands Using HVAC Hardware-In-the-Loop Experiment for Advanced Control Strategies: Preprint
Smart thermostats have gained significant popularity due to their potential for optimizing energy consumption and enhanced user control while ensuring occupants' comfort. The deadband, also referred to as temperature differential, is defined as the temperature difference between the desired setpoint and upper threshold or lower threshold for the HVAC equipment to turn on. It is a key factor influencing energy efficiency and user satisfaction. This paper presents a comparative analysis of the deadbands of five different smart thermostats, tested with a heat pump, aiming to identify variations in their deadband settings and implications for energy management. The experimental study was conducted using a HVAC hardware-in-theloop (HIL) system that integrates smart thermostats with physical HVAC equipment in a simulated house environment. The study explores the trade-offs between energy efficiency and occupant comfort and highlights how different thermostats participating in demand response event cycle differently based on their deadband settings. The findings offer valuable insights into how selecting the right thermostat or configuring smart thermostat with appropriate deadband settings can be leveraged to enhance demand response capabilities, shift loads effectively and improve operational flexibility in HVAC systems.
Closed‐Loop Recycling of Mixed Plastics of Polyester and CO 2 ‐Based Polycarbonate to a Single Monomer
Abstract Physical blending is an effective strategy for tailoring polymeric materials to specific application requirements. However, physically blended mixed plastics waste adds additional barriers in mechanical or chemical recycling. This difficulty arises from the intricate requirement for meticulous sorting and separation of the various polymers in the inherent incompatibility of mixed polymers during recycling. To overcome this impediment, this work furthers the emerging single‐monomer – multiple‐materials approach through the design of a bifunctional monomer that can not only orthogonally polymerize into two different types of polymers – specifically lactone‐based polyester and CO 2 ‐based polycarbonate – but the resultant polymers and their mixture can also be depolymerized back to the single, original monomer when facilitated by catalysis. Specifically, the lactone/epoxide hybrid bifunctional monomer (BiL O ) undergoes ring‐opening polymerization through the lactone manifold to produce polyester, PE(BiL O ), and is also applied to ring‐opening copolymerization with CO 2 , via the epoxide manifold, to yield polycarbonate, PC(BiL O ). Remarkably, a one‐pot recycling process of a BiL O ‐derived PE/PC blend back to the constituent monomer BiL O in >99 % selectivity was achieved with a superbase catalyst at 150 °C, thereby effectively obviating the requirement for sorting and separation typically required for recycling of mixed polymers.
Closed‐Loop Recycling of Mixed Plastics of Polyester and CO 2 ‐Based Polycarbonate to a Single Monomer
Abstract Physical blending is an effective strategy for tailoring polymeric materials to specific application requirements. However, physically blended mixed plastics waste adds additional barriers in mechanical or chemical recycling. This difficulty arises from the intricate requirement for meticulous sorting and separation of the various polymers in the inherent incompatibility of mixed polymers during recycling. To overcome this impediment, this work furthers the emerging single‐monomer – multiple‐materials approach through the design of a bifunctional monomer that can not only orthogonally polymerize into two different types of polymers – specifically lactone‐based polyester and CO 2 ‐based polycarbonate – but the resultant polymers and their mixture can also be depolymerized back to the single, original monomer when facilitated by catalysis. Specifically, the lactone/epoxide hybrid bifunctional monomer (BiL O ) undergoes ring‐opening polymerization through the lactone manifold to produce polyester, PE(BiL O ), and is also applied to ring‐opening copolymerization with CO 2 , via the epoxide manifold, to yield polycarbonate, PC(BiL O ). Remarkably, a one‐pot recycling process of a BiL O ‐derived PE/PC blend back to the constituent monomer BiL O in >99 % selectivity was achieved with a superbase catalyst at 150 °C, thereby effectively obviating the requirement for sorting and separation typically required for recycling of mixed polymers.
Closed‐Loop Recycling of Poly(pentylene Adipate‐ co ‐Terephthalate) via Amine‐Catalyzed Methanolysis
Advancing circularity through effective chemical recycling strategies is essential for enabling the sustainable use of emerging biodegradable polyesters in film applications. In this context, poly(pentylene adipate-co-terephthalate) with a 40/60 adipate-to-terephthalate ratio (PPeAT60), a significantly stiffer and partially biobased copolyester recently reported by our team, offers improved mechanical performance and processability compared to commercial poly(butylene adipate-co-terephthalate), while providing a platform to evaluate advanced recycling approaches for film applications. Here, this study describes depolymerization of PPeAT60 through amine-catalyzed methanolysis, followed by the repolymerization of the recovered monomers. The resulting repolymerized material exhibited a molar mass distribution, chemical structure, and thermal stability comparable to the virgin polymer, confirming the technical feasibility of the methanolysis-based recycling route. Both polymers displayed nearly identical melting, glass transition, and decomposition temperatures, crystallinity, and modulus, demonstrating full structural and mechanical reproducibility after recycling. Variations in crystallization kinetics, elongation at break, and barrier properties likely arise from trace impurities (<1%) introduced during processing acting as nucleating and stress-inducing agents. Overall, these results demonstrate that PPeAT60 retains its key properties after chemical recycling, establishing methanolysis as a promising platform for recycling of this partially biobased polymer that may be able to replace both conventional polyolefins and PBAT in flexible packaging applications.
A new framework for higher loop Witten diagrams
The differential representation is a novel formalism for studying boundary correlators in (d + 1)-dimensional anti-de Sitter space. In this letter, we generalize the differential representation beyond tree level using the notion of operator-valued integrals. We use the differential representation to compute three-point bubble and triangle Witten diagrams with external states of conformal dimension ∆ = d. We compare the former to a position space computation.
Amplitudes, supersymmetric black hole scattering at $\mathcal{O}\left({G}^5\right)$, and loop integration
We compute the potential-graviton contribution to the scattering amplitude, the radial action, and the scattering angle of two extremal black holes in $\mathcal{N}$ = 8 supergravity at the fifth post-Minkowskian order and to next-to-leading order in a large mass expansion (first self-force order). Properties of classical unitarity cuts allow us to focus on the integration-by-parts reduction of planar integrals, while nonplanar integrals at this order are obtained from the planar ones by straightforward manipulations. We present the solution to the differential equations for all master integrals necessary to evaluate the classical scattering amplitudes of massive scalar particles at this order in all gravitational theories, in particular in $\mathcal{N}$ = 8 supergravity, and in general relativity. Despite the appearance of higher-weight generalized polylogarithms and elliptic functions in the solution to the differential equation for master integrals, the final supergravity answer is remarkably simple and contains only (harmonic) polylogarithmic functions up to weight 2. The systematic analysis of elliptic integrals discussed here, as well as the particular organization of boundary integrals in $\mathcal{N}$ = 8 observables are independent of supersymmetry and may have wider applications, including to aspects of collider physics.
Synthetic feed-forward loop circuit boosts transgene expression in sugarcane
Bio-based products derived from natural plant-derived materials offer a promising alternative to petroleum-based products, which are essential for achieving global sustainability (Gupta et al. 2022). Sugarcane provides 40% of the world’s biofuel (Brant et al. 2025). Recently, metabolic engineering of sugarcane for hyperaccumulation of biomass oil is emerging as a strategy to elevate the crop’s energy content (Cao et al. 2023; Maitra et al. 2024). Synthetic transcription factors offer a powerful tool for modulating entire metabolic pathways by enabling fine-tuned activation or repression of specific genes (Liu and Stewart 2016; Hooghvorst and Altpeter 2023). However, the application of these technologies faces challenges, including the availability of well-characterized genetic building blocks for precise manipulation of gene expression, and the inherently challenging properties of gene expression in highly polyploid crops like sugarcane (Liu and Stewart 2016).
Atomistically-informed cluster dynamics modeling of concurrent interstitial and vacancy a-loop evolution in irradiated alpha-zirconium
Not Available
Closing the loop on plastics: Biological and hybrid routes for converting plastic waste to polyhydroxyalkanoates
Polyhydroxyalkanoate (PHA) production from plastic-derived substrates offers a promising route to mitigate plastic pollution while reducing dependence on conventional PHA feedstocks. Plastic waste represents an abundant carbon source for microbial fermentation, but efficient conversion remains limited by incomplete deconstruction, inhibitory intermediates, low carbon recovery, and challenges in process integration. Plastic-derived streams contain diverse compounds, including fatty acids, hydrocarbons, fatty alcohols, aldehydes, esters, and aromatic compounds generated during depolymerization. These intermediates can be metabolized by selected microorganisms, particularly Pseudomonas species with versatile fatty-acid and hydrocarbon pathways, as well as Cupriavidus necator and mixed microbial cultures. Unlike reviews that address plastic upcycling or PHA biosynthesis separately, this review focuses on the deconstruction–fermentation interface that governs plastic-to-PHA conversion. It consolidates current progress in plastic deconstruction, substrate conditioning, microbial metabolism, fermentation control, polymer recovery, and techno-economic and life-cycle considerations. Here, by emphasizing substrate composition, biological compatibility, plastic‑carbon recovery, and final polymer quality, the review identifies priorities for scalable and environmentally sustainable PHA production from plastic-derived substrates.
RNA sculpting by the primordial Helix-clasp-Helix–Strand-Loop (HcH–SL) motif enforces chemical recognition enabling diverse KH domain functions
Not Available
Human-in-the-loop control of dynamics and robotics using augmented reality
Not Available