Search NASA⌕ Search

SEARCH · Search NASA

Results for “lunar regolith”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Chemical composition of Luna 16 lunar regolith

Data on the chemical composition of regolith returned by the Luna 16 automatic station and two fragments of basalts from the lower layer of the core are presented. Spark mass spectrometric, primary X-ray spectral, emission spectral, and atomic absorption methods were used in the analysis. The regolith of mare provinces were shown to be a mixture of material of various origins. The source of the material of the mare regolith was principally basalts of the corresponding lunar lava maria. The regolith is genetically related to it. This follows from a comparison of the chemical composition, mineralogical, and petrochemical features of the basesalts and the regolith from the Sea of Fertility, Sea of Tranquillity, and Ocean of Storms, respectively.

Vinogradov, A. P.↗
NASA NTRS2006

Hydrogen Reduction of Ilmenite from Lunar Regolith

Each ascent vehicle returning from the lunar surface with a crew vehicle will require several tons of fuel. Most architecture studies of lunar exploration vehicles use liquid oxygen for fuel, either for LOX/LH2 or LOX/methane. Utilization of oxygen generated on the lunar surface saves mass launched from Earth, with a multiplication factor on the order of 4-5, e.g. production and utilization of 4 tons of lunar oxygen for the ascent vehicle saves 16-20 tons of initial mass in low Earth orbit (IMLEO). The paper discusses ongoing MSFC activity on oxygen production by hydrogen reduction of Ilmenite. Specifically the important project milestone is to develop the Technology Readiness Level for the generation of lunar oxygen for propellant production from 3 to 5. The paper will provide an overview of the processes for Oxygen Generation, Complete Systems Architecture for a pilot lunar plant, experimental apparatus development and initial experimental results, and future directions.

Ramachandran, N.↗
NASA NTRS1975

Monte Carlo simulation of turnover processes in the lunar regolith

A Monte Carlo model for the gardening of the lunar surface by meteoritic impact is described, and some representative results are given. The model accounts with reasonable success for a wide variety of properties of the regolith. The smoothness of the lunar surface on a scale of centimeters to meters, which was not reproduced in an earlier version of the model, is accounted for by the preferential downward movement of low-energy secondary particles. The time scale for filling lunar grooves and craters by this process is also derived. The experimental bombardment ages (about 4 x 10 to the 8th yr for spallogenic rare gases, about 10 to the 9th yr for neutron capture Gd and Sm isotopes) are not reproduced by the model. The explanation is not obvious.

Arnold, J. R.↗
NASA NTRS2011

Electrostatic Beneficiation of Lunar Regolith: Applications in In-Situ Resource Utilization

Upon returning to the moon, or further a field such as Mars, presents enormous challenges in sustaining life for extended periods of time far beyond the few days the astronauts experienced on the moon during the Apollo missions. A stay on Mars is envisioned to last several months, and it would be cost prohibitive to take all the requirements for such a stay from earth. Therefore, future exploration missions will be required to be self-sufficient and utilize the resources available at the mission site to sustain human occupation. Such an exercise is currently the focus of intense research at NASA under the In-situ Resource Utilization (ISRU) program. As well as oxygen and water necessary for human life, resources for providing building materials for habitats, radiation protection, and landing/launch pads are required. All these materials can be provided by the regolith present on the surface as it contains sufficient minerals and metals oxides to meet the requirements. However, before processing, it would be cost effective if the regolith could be enriched in the mineral(s) of interest. This can be achieved by electrostatic beneficiation in which tribocharged mineral particles are separated out and the feedstock enriched or depleted as required. The results of electrostatic beneficiation of lunar simulants and actual Apollo regolith, in lunar high vacuum are reported in which various degrees of efficient particle separation and mineral enrichment up to a few hundred percent were achieved.

Trigwell, Steve↗
NASA NTRS1994

Vapor Deposits in the Lunar Regolith

Since the Apollo missions, we have emphasized the following points, which are based on theoretical calculations and on laboratory studies of the properties of evaporated silicate deposits and of lunar samples. The mass of vapor generated by impacts on the lunar surface is comparable in magnitude to the mass of impact melt glasses; the physics of impact into a porous regolith requires that much of this vapor be retained in the soil rather than lost to space (as is widely believed); experimental coatings made from vaporized or sputtered lunar basalt contain abundant inclusions of submicroscopic, super paramagnetic metallic Fe; and this Fe may explain the magnetic signature, low albedo, reddened spectrum, and subdued absorption bands of lunar regolith. Our conclusions have been generally rejected by the lunar geochemical community for two reasons: there seemed to be no direct evidence for vapor deposits in Apollo samples, and it seemed that the lunar optical properties could be explained by the presence of impact melt glasses alone. However, advances in our understanding of the optical properties of glasses and of light scattering by planetary regoliths, and now the direct detection of vapor deposits, show that these objections are not valid. Vapor phase transport is a major process on the lunar surface, and unless its effects are taken into account, the chemical, magnetic, and optical properties of the regolith cannot be understood.

Hapke, Bruce↗
NASA NTRS2007

Aerosol Measurements of the Fine and Ultrafine Particle Content of Lunar Regolith

We report the first quantitative measurements of the ultrafine (20 to 100 nm) and fine (100 nm to 20 m) particulate components of Lunar surface regolith. The measurements were performed by gas-phase dispersal of the samples, and analysis using aerosol diagnostic techniques. This approach makes no a priori assumptions about the particle size distribution function as required by ensemble optical scattering methods, and is independent of refractive index and density. The method provides direct evaluation of effective transport diameters, in contrast to indirect scattering techniques or size information derived from two-dimensional projections of high magnification-images. The results demonstrate considerable populations in these size regimes. In light of the numerous difficulties attributed to dust exposure during the Apollo program, this outcome is of significant importance to the design of mitigation technologies for future Lunar exploration.

Greenberg, Paul S.↗
NASA NTRS1974

Loss of oxygen, silicon, sulfur, and potassium from the lunar regolith

The processes of formation and maturation of lunar soils lead to enrichments in the heavy stable isotopes of oxygen, silicon, sulfur, and potassium. The isotopic enrichment implies substantial losses of these elements from the moon. Vaporization by micrometeorite impact and by ion sputtering have removed at least 1% of the mass of the regolith. The losses of sulfur and potassium amount to at least 20-30% of their original abundance in the regolith.

Clayton, R. N.↗
NASA NTRS2012

Rates of Space Weathering in Lunar Regolith Grains

While the processes and products of lunar space weathering are reasonably well-studied, their accumulation rates in lunar soils are poorly constrained. Previously, we showed that the thickness of solar wind irradiated rims on soil grains is a smooth function of their solar flare particle track density, whereas the thickness of vapor-deposited rims was largely independent of track density [1]. Here, we have extended these preliminary results with data on additional grains from other mature soils.

Zhang, S.↗
NASA NTRSDate not supplied

Low-Cost Testing in a Representative Lunar Regolith Environment

- NASA is anticipating landing on the lunar surface - Long duration missions - In-situ resource use? - Few solutions at this time - Early Career Initiative (ECI) to develop a "Dust-tolerant, cryogenic, magnetic-latched coupler" (CryoMag)

Scott Stebbins↗
NASA NTRS1990

Evaluation of geophysical properties of the lunar regolith for the design of precursor scientific missions for the space exploration initiative

The following topics are addressed: (1) the frequency of encountering boulders that represent hazards to lunar operations; (2) the ease of lunar soil excavation; (3) the use of explosives in excavation operation; (4) the trafficability of the regolith; (5) problems encountered in mining (probably strip mining) of the regolith; (6) the stable angle(s) of repose in excavation of the regolith; (7) the layering to be encountered in the subsurface; (8) knowledge of the regolith site and the possibility of its general application to any site on the lunar surface; (9) the data needed to characterize a site for a lunar base; (10) the influence of regolith properties on the design of geophysical experiments from the lunar base; and (11) terrestrial analogues for the geophysical properties of the lunar regolith.

Morgan, Paul↗
NASA NTRS2012

Analysis of Water Extraction From Lunar Regolith

Distribution of water concentration on the Moon is currently an area of active research. Recent studies suggest the presence of ice particles, and perhaps even ice blocks and ice-cemented regolith on the Moon. Thermal extraction of the in-situ water is an attractive means of sa tisfying water requirements for a lunar mission. In this paper, a model is presented to analyze the processes occurring during the heat-up of icy regolith and extraction of the evolved water vapor. The wet regolith is assumed to be present in an initially evacuated and sealed cell which is subsequently heated. The first step of the analysis invol ves calculating the gradual increase of vapor pressure in the closed cell as the temperature is raised. Then, in the second step, the cell is evacuated to low pressure (e.g., vacuum), allowing the water vapor to leave the cell and be captured. The parameters affecting water vap or pressure build-up and evacuation for the purpose of extracting water from lunar regolith are discussed in the paper. Some comparisons wi th available experimental measurements are also made.

Hegde, U.↗
NASA NTRS2009

Development of a Reactor for the Extraction of Oxygen and Volatiles From Lunar Regolith

The RESOLVE (Regolith and Environment Science, Oxygen and Lunar Volatiles Extraction) Project, aims to extract and quantify useful resources from lunar soil. The reactor developed for RESOLVE is a dual purpose system, designed to evolve both water, at 150 C and up to 80 psig, and oxygen, using hydrogen reduction at 900 C. A variety of laboratory tests were performed to verify its operation and to explore the properties of the analog site soil. The results were also applied to modeling efforts which are being used to estimate the apparent thermal properties of the soil. The experimental and numerical results, along with the analog site tests, will be used to evolve and optimize future reactor designs.

Kleinhenz, Julie↗
NASA NTRS2009

Potential of Probing the Lunar Regolith using Rover-Mounted Ground Penetrating Radar: Moses Lake Dune Field Analog Study

Probing radars have been widely recognized by the science community to be an efficient tool to explore lunar subsurface providing a unique capability to address several scientific and operational issues. A wideband (200 to 1200 MHz) Ground Penetrating Radar (GPR) mounted on a surface rover can provide high vertical resolution and probing depth from few tens of centimeters to few tens of meters depending on the sounding frequency and the ground conductivity. This in term can provide a better understand regolith thickness, elemental iron concentration (including ilmenite), volatile presence, structural anomalies and fracturing. All those objectives are of important significance for understanding the local geology and potential sustainable resources for future landing sites in particular exploring the thickness, structural heterogeneity and potential volatiles presence in the lunar regolith. While the operation and data collection of GPR is a straightforward case for most terrestrial surveys, it is a challenging task for remote planetary study especially on robotic platforms due to the complexity of remote operation in rough terrains and the data collection constrains imposed by the mechanical motion of the rover and limitation in data transfer. Nevertheless, Rover mounted GPR can be of great support to perform systematic subsurface surveys for a given landing site as it can provide scientific and operational support in exploring subsurface resources and sample collections which can increase the efficiency of the EVA activities for potential human crews as part of the NASA Constellation Program. In this study we attempt to explore the operational challenges and their impact on the EVA scientific return for operating a rover mounted GPR in support of potential human activity on the moon. In this first field study, we mainly focused on the ability of GPR to support subsurface sample collection and explore shallow subsurface volatiles.

Horz, F.↗
NASA NTRSDate not supplied

Evaluation of Materials and Surfaces for Lunar Regolith Adherence Characterization (RAC) Payload Samples

As the quest for long term lunar exploration and habitation comes closer to reality, widespread efforts are ongoing to effectively mitigate lunar dust surface contamination and infiltration. This dust is hazardous to humans and tends to adhere tenaciously to all exposed surfaces, causing performance issues and ultimately failure. While several active and passive technologies have been developed to address this challenge, assessing the performance of these technologies in the actual lunar environment is extremely important. The regolith adherence characterization (RAC) experiment payload provides an important opportunity for this evaluation. The RAC payload is designed by Alpha Space for the National Aeronautics and Space Administration (NASA)and scheduled to be flown to the moon in 2023 on the Firefly Aerospace Blue Ghost lander. As there were a limited number of slots available for materials to be chosen for this mission, it was critical to make an informed selection. Two polymers, a carbon fiber reinforced composite and a metal alloy were chosen to be a diverse selection of structural materials from NASA Langley Research Center. Each material was topographically modified using laser ablation patterning. This article briefly describes the selection and testing procedure and some of the results obtained for the passive dust mitigating materials and surfaces selected for this lunar surface experiment.

Lunar Dust↗
NASA NTRS1974

The micrometeoroid complex and evolution of the lunar regolith

The interaction of the micrometeoroid complex with the lunar surface is evidenced by numerous glass-lined microcraters on virtually every lunar surface exposed to space. Such craters range in size from less than .1 micron to approximately 2 sq cm diameter. Using small scale laboratory cratering experiments for calibration, the observed crater-sized frequency distributions may be converted into micrometeoroid mass distributions. These lunar mass distributions are in essential agreement with satellite data. Some physical properties of micrometeoroids may be deduced by comparing lunar crater geometries with those obtained in laboratory experiments. The proponderance of circular outlines of lunar microcraters necessitates equidimensional, if not spherical, micrometeoroids.

Hoerz, F.↗
NASA NTRS1990

Helium-3 in the lunar regolith

A preliminary assessment of He-3 distribution in lunar soils was completed, including variations with soil location, depth, composition, grain size, and other parameters that might be useful in developing mining scenarios. One of the primary tools was a compilation of available analyses of He-3 in lunar samples. The compilation includes analyses of more than 250 numbered samples (plus duplicates and subsamples in many cases) from the American and Russian lunar programs, reported in nearly 100 publications. In addition, average abundances for soils from each of the Apollo landing sites were computed. These were coupled with models and measurements of other pertinent parameters.

Swindle, T.↗
NASA NTRS2022

Lunar Thermal Analysis Guidebook (L-TAG): Thermo-physical and Optical Properties of Lunar Regolith

The purpose of the Human Landing System (HLS) Lunar Thermal Analysis Guidebook (L-TAG) is to provide guidance to experienced thermal engineering personnel on how to conduct worst-case hot and cold lunar thermal analyses for the design of HLS hardware in both lunar orbit and lunar surface environments. The HLS L-TAG will include pointers to the Cross-Program Design Specification for Natural Environments (DSNE), SLS-SPEC-159, and best practices/approaches for interpreting and complying with the DSNE lunar thermal environments in the analysis of HLS spacecraft, vehicles and systems. The HLS L-TAG is a reference document that is available to all HLS thermal analysts. In the event of a conflict with the descriptions provided herein, the DSNE takes precedence. This document represents the best available information at the time of publication and will undergo updates as the HLS program evolves. Feedback from the user community is encouraged to support further refinement of the Guidebook.

Thermal Analysis↗