Search NASA⌕ Search

SEARCH · Search NASA

Results for “material flows”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

On the Thermal Model of Transverse Flow of Unidirectional Materials

The thermal model for transverse heat flow of having single filament in a unit cell is extended. In this model, we proposed that two circular filaments in a unit cell of square packing array and obtained the transverse thermal conductivity of an unidirectional material.

Tai, Hsiang↗

A Perspective on Solid-State Additive Manufacturing of Aluminum Matrix Composites Using MELD

MELD, previously known as additive friction stir, is an emerging solid-state process that enables additive manufacturing of a broad range of metals and metal matrix composites. Here, we discuss its potential for fabricating aluminum matrix composites by showing examples of Al-SiC, Al 6061-Mo, and Al 6061-W composites. Thanks to its solid-state nature, MELD is uniquely suited for the use of high-strength aluminum alloys as matrix material, which would suffer from hot cracking problems in liquid-state processes. Using complementary characterization tools, we show that this process results in aluminum matrix composites with no observed porosity and homogeneous particle distribution. These properties stem from the extensive material flow and mixing during the deposition process. In addition to the high quality of produced composites, its ease of use, versatility of feed materials, and scalability all make MELD an attractive tool for additive manufacturing of aluminum matrix composites. We also discuss the limitations of MELD for composite fabrication, with issues related to maximum reinforcement loading, tool wear, and in-plane resolution. Finally, we compare the benefits and limitations of MELD with other composite fabrication processes such as powder bed fusion, friction stir processing, stir casting, and powder processing.

36 MATERIALS SCIENCE↗

2012 SRNL-EM Vane Rheology Results

The vane method has been shown to be an effective tool in measuring the yield stress of both settled and mixed slurries in laboratory bench scale conditions in supporting assessments of both actual and simulant waste slurries. The vane has also been used to characterize dry powders and granular solids, the effect of non-cohesive solids with interstitial fluids and used as a guide to determine if slip is present in the geometries typically used to perform rheological flow curve measurements. The vane has been extensively characterized for measuring the shear strength in soils in both field and laboratory studies. The objectives for this task are: Fabricate vane instrument; Bench top testing to further characterize the effect of cohesive, non-cohesive, and blends of cohesive/non-cohesive simple simulants; Data from measurement of homogenized and settled bed of Kaolin sludge and assessment of the technology. In this document, the assessment using bench scale measurements of non-cohesive materials (beads) and cohesive materials (kaolin) is discussed. The non-cohesive materials include various size beads and the vane was assessed for depth and deaeration (or packing) via tapping measurements. For the cohesive (or non-Newtonian) materials, flow curves and yield stress measurements are performed using the vane and this data is compared to the traditional concentric cylinder flow curve measurement. Finally, a large scale vane was designed, fabricated, and tested with the cohesive (or non-Newtonian) materials to determine how a larger vane performs in measuring the yield stress and flow curve of settled cohesive solids.

47 OTHER INSTRUMENTATION↗

U.S. Wind Energy Manufacturing and Supply Chain: A Competitiveness Analysis

The goal of the project was to develop a greater understanding of the key factors determining wind energy component manufacturing costs and pricing on a global basis in order to enhance the competitiveness of U.S. manufacturers, and to reduce installed systems cost. Multiple stakeholders including DOE, turbine OEMs, and large component manufactures will all benefit by better understanding the factors determining domestic competitiveness in the emerging offshore and next generation land-based wind industries. Major objectives of this project were to: 1. Carry out global cost and process comparisons for 5MW jacket foundations, blades, towers, and permanent magnet generators; 2. Assess U.S. manufacturers’ competitiveness and potential for cost reduction; 3. Facilitate informed decision-making on investments in U.S. manufacturing; 4. Develop an industry scorecard representing the readiness of the U.S. manufacturers’ to produce components for the next generations of wind turbines, nominally 3MW land-based and 5MW offshore; 5. Disseminate results through the GLWN Wind Supply Chain GIS Map, a free website that is the most comprehensive public database of U.S. wind energy suppliers; 6. Identify areas and develop recommendations to DOE on potential R&D areas to target for increasing domestic manufacturing competitiveness, per DOE’s Clean Energy Manufacturing Initiative (CEMI). Lists of Deliverables 1. Cost Breakdown Competitive Analyses of four product categories: tower, jacket foundation, blade, and permanent magnet (PM) generator. The cost breakdown for each component includes a complete Bill of Materials with net weights; general process steps for labor; and burden adjusted by each manufacturer for their process categories of SGA (sales general and administrative), engineering, logistics cost to a common U.S. port, and profit. 2. Value Stream Map Competitiveness Analysis: A tool that illustrates both information and material flow from the point of getting a customer order at the manufacturing plant; to the orders being forwarded by the manufacturing plant to the material suppliers; to the material being received at the manufacturing plant and processed through the system; to the final product being shipped to the Customer. 3. Competitiveness Scorecard: GLWN developed a Wind Industry Supply Chain Scorecard that reflects U.S. component manufacturers’ readiness to supply the next generation wind turbines, 3MW and 5MW, for land-based and offshore applications. 4. Wind Supply Chain Database & Map: Expand the current GLWN GIS Wind Supply Chain Map to include offshore elements. This is an on-line, free access, wind supply chain map that provides a platform for identifying active and emerging suppliers for the land-based and offshore wind industry, including turbine component manufacturers and wind farm construction service suppliers.

17 WIND ENERGY↗

A prospect for computing in porous materials research: Very large fluid flow simulations

Properties of porous materials, abundant both in nature and industry, have broad influences on societies via, e.g. oil recovery, erosion, and propagation of pollutants. The internal structure of many porous materials involves multiple scales which hinders research on the relation between structure and transport properties: typically laboratory experiments cannot distinguish contributions from individual scales while computer simulations cannot capture multiple scales due to limited capabilities. Thus the question arises how large domain sizes can in fact be simulated with modern computers. This question is here addressed using a realistic test case; it is demonstrated that current computing capabilities allow the direct pore-scale simulation of fluid flow in porous materials using system sizes far beyond what has been previously reported. The achieved system sizes allow the closing of some particular scale gaps in, e.g. soil and petroleum rock research. Specifically, a full steady-state fluid flow simulation in a porous material, represented with an unprecedented resolution for the given sample size, is reported: the simulation is executed on a CPU-based supercomputer and the 3D geometry involves 16,3843 lattice cells (around 590 billion of them are pore sites). Using half of this sample in a benchmark simulation on a GPU-based system, a sustained computational performance of 1.77 PFLOPS is observed. These advances expose new opportunities in porous materials research. The implementation techniques here utilized are standard except for the tailored high-performance data layouts as well as the indirect addressing scheme with a low memory overhead and the truly asynchronous data communication scheme in the case of CPU and GPU code versions, respectively.

Computer Science↗

Capillary Instability in Nanoimprinted Polymer Films

Capillary forces play an active role in defining the equilibrium structure of nanoscale structures. This effect can be especially pronounced in soft materials such as polymers near or above their glass transition temperature Tg where material flow is possible. In these situations, the effect of surface tension can produce varied and complex capillary instabilities, even in relatively simple geometries such as parallel line-space grating patterns. Here we investigate a novel capillary instability that arises in polystyrene line-space gratings with a residual layer connecting these structures (created by nanoimprint lithography) upon thermal annealing of these patterns. This novel instability is characterized by the development of lateral undulations of the lines that culminates in the local coalescence of adjacent imprinted lines. An exact analytic model of this undulatory instability is not possible, but we introduce a simple physical model for this lateral instability based on the driving force to reduce the surface energy, as in the well-known Rayleigh-Plateau instability which is likewise surface energy driven. Good agreement is obtained between this simplified model and our observations. Our insights into the nature of this instability have implications for controlling the thermal stability of nanoscale patterns made by nanoimprint lithography or other lithography techniques.

36 MATERIALS SCIENCE↗

Electrical resistance tomography to monitor unsaturated moisture flow in cementitious materials

Traditionally the electrically-based assessment of the moisture flow in cement-based materials relies on two- or four-point measurements. In this paper, imaging of moisture distribution with electrical resistance tomography (ERT) is considered. Especially, the aim is to study whether ERT could give information on unsaturated moisture flows in cases where the flow is non-uniform. In the experiment, the specimens are monitored with ERT during the water ingress. The ERT reconstructions are compared with neutron radiographs, which provide high resolution information on the 2D distribution of the moisture. The results indicate that ERT is able to detect the moisture movement and to show approximately the shape and position of the water front even if the flow is nonuniform.

36 MATERIALS SCIENCE↗

Effects of Rotation Speed on Microstructure and Mechanical Properties of 2060 Al-Cu-Li Alloy in Friction Stir Welding

Microstructural and mechanical properties of 2.0-mm-thick 2060 Al-Cu-Li alloy joints obtained at different rotation speeds were assessed in this study. The rotation speeds ranged from 400 to 1300 rpm, with welding speed kept at a constant value of 100 mm/min. With the increase in rotation speed, grain coarsening occurred while the density of precipitation decreased in the stir zone (SZ), and great amounts of the Al{sub 2}CuLi and Al{sub 2}Cu phases were dissolved while only small amounts of the Al{sub 3}Zr and Al{sub 3}Li phases remained. The lowest hardness was found at the interface between the heat-affected zone (HAZ) and thermo-mechanically affected zone (TMAZ); the average hardness value of SZ increased, while the lowest hardness moved in the direction away from the center of joints. The ultimate strength (UTS) of weld first increased rapidly and then slowly decreased as rotation speed increased, with a maximum value of 443 MPa obtained at a rotation speed of 600 rpm, reaching 83.58% of the base metal (BM) strength. Three fracture modes were established to illustrate the growth mechanism of the crack. Analysis of the fracture surface showed that insufficient materials flowed and coarsened secondary phases caused the joint fracture.

36 MATERIALS SCIENCE↗

Transient behavior of flare-associated solar wind. II - Gas dynamics in a nonradial open field region

Transient behavior of flare-associated solar wind in the nonradial open field region is numerically investigated, taking into account the thermal and dynamical coupling between the chromosphere and the corona. A realistic steady solar wind is constructed which passes through the inner X-type critical point in the rapidly diverging region. The wind speed shows a local maximum at the middle, O-type, critical point. The wind's density and pressure distributions decrease abruptly in the rapidly diverging region of the flow tube. The transient behavior of the wind following flare energy deposition includes ascending and descending conduction fronts. Thermal instability occurs in the lower corona, and ascending material flows out through the throat after the flare energy input ceases. A local density distribution peak is generated at the shock front due to the pressure deficit just behind the shock front.

Nagai, F.↗

Ceramic susceptor for induction bonding of metals, ceramics, and plastics

A thin (.005) flexible ceramic susceptor (carbon) was discovered. It was developed to join ceramics, plastics, metals, and combinations of these materials using a unique induction heating process. Bonding times for laboratory specimens comparing state of the art technology to induction bonding were cut by a factor of 10 to 100 times. This novel type of carbon susceptor allows for applying heat directly and only to the bondline without heating the entire structure, supports, and fixtures of a bonding assembly. The ceramic (carbon film) susceptor produces molten adhesive or matrix material at the bond interface. This molten material flows through the perforated susceptor producing a fusion between the two parts to be joined, which in many instances has proven to be stronger than the parent material. Bonding can be accomplished in 2 minutes on areas submitted to the inductive heating. Because a carbon susceptor is used in bonding carbon fiber reinforced plastics and ceramics, there is no radar signature or return making it an ideal process for joining advanced aerospace composite structures.

Fox, Robert L.↗

Mechanical Characterization of Loblolly Pine

Biorefineries are faced with various material flow challenges during feeding and handling, due to inherent variability and inhomogeneity of biomass feedstocks. This impacts the efficiency of refinery processes and unit operations. Proper characterization of bulk properties allows for optimal process design and reduction of overall costs. This work is aimed at evaluating the physical and mechanical properties that impact bulk flow of loblolly pine. Cyclic axial compression tests are performed to elucidate consolidation behavior under different stress conditions. The results are then used to develop correlations between material parameters (particle size, tissue type, moisture content) and Elastic Modulus of bulk samples.

09 BIOMASS FUELS↗

Process and apparatus for separating solid mixtures

An elutriation column is installed in a separation tank. The elutriation column includes a vertical separation column having a first side feed arm and a second side overflow arm spaced above the first side feed arm. Water is forced upwardly through the vertical separation column at a controllable velocity. A solid feed mixture is fed through the first side feed arm to the vertical separation column. Water from the tank rising in the vertical separation column at the controlled velocity causes targeted floater materials to move upwardly in the vertical separation column and heavier sinker materials to continue to sink. The floater materials flow from an outlet in the side of the separation tank into the recovery tank. At a discharge, lower end of the vertical separation column, the heavier sinker materials are removed from the separation tank. A mechanism is provided for purging undesirable materials that can cause plugging from the feed arm.

Jody, Bassam J.↗

High performance poly(etherketoneketone) (PEKK) composite parts fabricated using Big Area Additive Manufacturing (BAAM) processes

ORNL collaborated with Arkema Inc. to investigate poly(etherketoneketone) (PEKK) and its composites as potential feedstock material for Big Area Additive Manufacturing (BAAM) system. In this work thermal and rheological properties were investigated and characterized in order to identify suitable processing conditions and material flow behavior for BAAM process.

36 MATERIALS SCIENCE↗

Dendritic Growth with Fluid Flow for Pure Materials

We have developed a three-dimensional, adaptive, parallel finite element code to examine solidification of pure materials under conditions of forced flow. We have examined the effect of undercooling, surface tension anisotropy and imposed flow velocity on the growth. The flow significantly alters the growth process, producing dendrites that grow faster, and with greater tip curvature, into the flow. The selection constant decreases slightly with flow velocity in our calculations. The results of the calculations agree well with the transport solution of Saville and Beaghton at high undercooling and high anisotropy. At low undercooling, significant deviations are found. We attribute this difference to the influence of other parts of the dendrite, removed from the tip, on the flow field.

Jeong, Jun-Ho↗

Analysis of the flow imbalance on the profile shape during the extrusion of thin magnesium sheets

The extrusion process facilitates the production of magnesium sheets featuring a very thin thickness as well as excellent surface properties by using a single process step only. However, the extrusion of the magnesium sheets applying not optimized process parameters, e.g. low billet temperature or/ and poorly deformable magnesium alloy, produce pronounced buckling and waving of the extruded sheets as well as a variation of accuracy in profile shape along the cross section. The present investigation focuses on the FEM-simulation of the extrusion of magnesium sheets in order to clarify the origin of the mentioned effects. The simulations identify the flow imbalance during extrusion as the main critical factor. Due to the flow imbalance after passing the die a large compression stress zone is formed causing the buckling and waving of the thin sheets. Furthermore, the simulations of the magnesium sheet extrusion reveal that the interaction of the material flow gradients along the width and along the thickness direction near the die orifice lead to the variation of the accuracy in profile shape.

36 MATERIALS SCIENCE↗

Unwinding motion of a twisted active region filament

To better understand the structures of active region filaments and the eruption process, we study an active region filament eruption in active region NOAA 11082 in detail on 2010 June 22. Before the filament eruption, the opposite unidirectional material flows appeared in succession along the spine of the filament. The rising of the filament triggered two B-class flares at the upper part of the filament. As the bright material was injected into the filament from the sites of the flares, the filament exhibited a rapid uplift accompanying the counterclockwise rotation of the filament body. From the expansion of the filament, we can see that the filament consisted of twisted magnetic field lines. The total twist of the filament is at least 5π obtained by using a time slice method. According to the morphology change during the filament eruption, it is found that the active region filament was a twisted flux rope and its unwinding motion was like a solar tornado. We also find that there was a continuous magnetic helicity injection before and during the filament eruption. It is confirmed that magnetic helicity can be transferred from the photosphere to the filament. Using the extrapolated potential fields, the average decay index of the background magnetic fields over the filament is 0.91. Consequently, these findings imply that the mechanism of solar filament eruption could be due to the kink instability and magnetic helicity accumulation.

79 ASTRONOMY AND ASTROPHYSICS↗

In situ imaging during compression of plastic bonded explosives for damage modeling

Here, the microstructure of plastic bonded explosives (PBXs) is known to influence behavior during mechanical deformation, but characterizing the microstructure can be challenging. For example, the explosive crystals and binder in formulations such as PBX 9501 do not have sufficient X-ray contrast to obtain three-dimensional data by in situ, absorption contrast imaging. To address this difficulty, we have formulated a series of PBXs using octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX) crystals and low-density binder systems. The binders were hydroxyl-terminated polybutadiene (HTPB) or glycidyl azide polymer (GAP) cured with a commercial blend of acrylic monomers/oligomers. The binder density is approximately half of the HMX, allowing for excellent contrast using in situ X-ray computed tomography (CT) imaging. The samples were imaged during unaxial compression using micro-scale CT in an interrupted in situ modality. The rigidity of the binder was observed to significantly influence fracture, crystal-binder delamination, and flow. Additionally, 2D slices from the segmented 3D images were meshed for finite element simulation of the mesoscale response. At low stiffness, the binder and crystal do not delaminate and the crystals move with the material flow; at high stiffness, marked delamination is noted between the crystals and the binder, leading to very different mechanical properties. Initial model results exhibit qualitatively similar delamination.

36 MATERIALS SCIENCE↗