Search NASA⌕ Search

SEARCH · Search NASA

Results for “medium”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

PV Modules Temperature Variation and Patterns in Medium and Utility-Scale Floating PV Systems

This paper presents the preliminary results and findings of the four operational Floating PV systems across the USA. At each site, temperature of five PV modules located at North-West, North-East, Middle, South-West, and, South-East have been monitored through the Resistant Temperature Detector (RTD) sensors. Three RTDs were attached to each PV module on the rear-side along the diagonal at top, middle and bottom cells. The preliminary results reveal wide temperature differences among the inter and intra PV modules. Besides this, wave pattern temperatures were observed in a few PV modules. The final results, findings, and, factors responsible will be investigated during the next few months. Index Terms - photovoltaic module, floating PV systems, string, array, temperature, mismatch, utility scale.

ENGINEERING,SOLAR ENERGY↗
DOE OSTI2025

Experimental Investigation of Air-Fuel Equivalence Ratio Effects on Advanced Dual-fuel Diesel/Ammonia Combustion on a Single-Cylinder Medium-Duty Diesel Engine at High Load

Ammonia (NH3) has gathered a lot of interest as a low-lifecycle-carbon fuel in sectors with high weight and distance requirements, such as shipping. The International Maritime Organization (IMO) mandates a 70-80% greenhouse gas (GHG) reduction by 2040, which is only possible with advanced engine technologies and fuels like NH3. Prior research studies at the US Department of Energy’s Oak Ridge National Laboratory have shown strong performance with NH3 under dual-fuel mode using conventional diesel combustion (CDC) manifold air pressure (MAP) settings. Diesel airflow was initially used to simplify retrofitting (no turbocharger modification), which resulted in air-fuel equivalence ratios (λ) greater than 1.5. To characterize potential improvements in dual-fuel NH3 combustion performance at richer in-cylinder conditions, a global λ sweep using a diesel pilot ignition (DPI) strategy with diesel fuel injected near top-dead center (TDC) and a reactivity-controlled compression ignition (RCCI) injection strategy with diesel fuel injected earlier during the compression stroke were compared. The experiments were conducted at 1200 RPM and 12.6 bar (75% load), and λ was varied by decreasing the commanded air flow to the engine at greater than 90% ammonia energy substitution (AES) level. A diesel injection timing sweep was conducted for both the combustion modes at fixed λ, and the timing with the lowest engine-out N2O emissions was identified. The results indicated an optimal balance between CO2, eq and thermal efficiency benefits for both DPI and RCCI injection strategy cases compared to CDC at a λ of 1.4. The indicated N-based emissions exhibited a strong correlation to the ratio of CA5–50 and ignition delay for DPI, but no apparent trend emerged for the RCCI injection strategy at the tested boundary conditions.

Tyrewala, Daanish [ORNL] (ORCID:0000000208599324)↗
DOE OSTI2024

SHOCK TUBE IGNITION STUDIES OF RENEWABLE DIESEL FUELS FOR MEDIUM AND HEAVY-DUTY TRANSPORTATION

Currently extensive research on alternative fuels is being conducted due to their increasing demand to reduce greenhouse emissions. One renewable fuel studied in this work is dimethyl ether (DME) blended with propane(C3H8) as a potential mixture for heavy-duty engines used in semi-trucks. The blend has the potential to drastically reduce particulate and greenhouse gas emissions compared to a conventional diesel engine operating under similar conditions. To develop the use of mixture, one must conduct detailed conceptual and simulation studies before progressing to detail studies in CFD, engine modifications, and live testing. For simulations, accurate high-fidelity chemical kinetic models are necessary. However, the validity of the chemical kinetic mechanism for operating conditions of a heavy-duty mixing-controlled compression (MCCI) engine was widely unknown until recent work presented here and published. In this work, we studied the ignition of DME and propane blends in a shock tube under MCCI engine conditions. Ignition delay time (IDT) gathered behind the reflected shock for DME-propane mixtures for heavy-duty compression ignition (CI) engine parameters. Testing was conducted for undiluted varieties spanning from temperatures of 700 to 1100 K at pressures ranging from 55 to 84 bar for various blends (100% CH3OCH3, 100% C3H8, 60% CH3OCH3/ 40% C3H8) of DME and propane were combusted in synthetic air (21% O2/ 79% N2). Several experiments were conducted at higher pressures (90-120 bar) to improve the model performance and accuracy. The ignition delay times (IDTs) were compared to recent mechanisms, including Aramco3.0, NUIG, and Dames et al. A common trend among the mechanisms was overpredicted experimental IDTs. Further studies were conducted by a sensitivity analysis using the Dames et al. model, and critical reactions sensitive to IDTs of DME-propane mixture near 60 bar are outlined. Chemical analysis was conducted on the NTC region to explain chemical kinetics which is critical for developing MCCI heavy duty engines.

Mohammed, Zuhayr Pasha↗
DOE OSTI2024

Radiopaque particle processing additive

A radiopaque processing medium comprising a plurality of radiopaque particles and a non-radiopaque processing medium. The plurality of radiopaque particles is added to the non-radiopaque processing medium to increase a bulk density of the processing medium thereby forming the radiopaque processing medium. The radiopaque processing medium allows excess process media to be located and characterized during X-ray inspection of an electronic device on which the radiopaque processing medium was used. The radiopaque processing medium may also be used to locate and identify flaws/defects of the electronic device based on the location of excess radiopaque processing medium. The radiopaque processing medium may also be used as an underfill material to reinforce electronic chips soldered to the electronic device.

Diamond, Louis↗
DOE OSTI2026

Effect of recoils on soft-drop-groomed observables in 𝛾-tagged jets in a multistage approach

We investigate medium-induced modifications to jet substructure observables that characterize hard components in central Pb-Pb collisions at $\sqrt{𝑠_{𝑁⁢𝑁}}$ = 5.02 TeV. Using a multistage Monte Carlo simulation of in-medium jet shower evolution, we explore flavor-dependent medium effects through simulations of inclusive and 𝛾-tagged jets. The results show that quark jets undergo a nonmonotonic modification compared with gluon jets in observables such as the Pb-Pb to 𝑝−𝑝 ratio of the soft drop prong angle 𝑟 𝑔 , the relative prong transverse momentum 𝑘 𝑇,𝑔 , and the groomed mass 𝑚 𝑔 distributions. Due to this nonmonotonic modification, 𝛾-tagged jets, enriched in quark jets, provide surprisingly clear signals of medium-induced structural modifications, distinct from effects dominated by selection bias. Further systematic studies demonstrate that these effects are dominated by recoil medium response. This work highlights the potential of hard substructures in 𝛾-tagged jets as powerful tools for probing the jet-medium interactions in high-energy heavy-ion collisions, in particular by enabling detailed investigations of jet-medium parton scatterings via their associated medium response. All simulations for 𝛾-tagged jet analyses carried out in this paper used triggered events containing at least one hard photon, which highlights the utility of these observables for future Bayesian analysis.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Radiative corrections for factorized jet observables in heavy ion collisions

I look at the renormalization of the medium structure function and a medium induced jet function in a factorized cross section for jet substructure observables in Heavy Ion collisions. This is based on the formalism developed in [1], which uses an Open quantum system approach combined with the Effective Field Theory (EFT) for forward scattering to derive a factorization formula for jet observables which work as hard probes of a long lived dilute Quark Gluon Plasma (QGP) medium. I show that the universal medium structure function that captures the observable independent physics of the QGP has both rapidity and UV anomalous dimensions that appear due to medium induced Bremsstrahlung. The resulting Renormalization Group (RG) equations correspond to the BFKL equation and the running of the QCD coupling respectively. I present the first results for the numerical impact of resummation using these RG equations on the mean free path of the jet in the medium. I also briefly discuss the prospects of extending this formalism for a short lived dense medium.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2026

Data for An End-to-End Pipeline for Succinic Acid Production at an Industrially Relevant Scale Using Issatchenkia orientalis

Microbial production of succinic acid (SA) at an industrially relevant scale has been hindered by high downstream processing costs arising from neutral pH fermentation for over three decades. Here, we metabolically engineer the acid-tolerant yeast Issatchenkia orientalis for SA production, attaining the highest titers in sugar-based media at low pH (pH 3) in fed-batch fermentations, i.e. 109.5 g/L in minimal medium and 104.6 g/L in sugarcane juice medium. We further perform batch fermentation using sugarcane juice medium in a pilot-scale fermenter (300×) and achieve 63.1 g/L of SA, which can be directly crystallized with a yield of 64.0%. Finally, we simulate an end-to-end low-pH SA production pipeline, and techno-economic analysis and life cycle assessment indicate our process is financially viable and can reduce greenhouse gas emissions by 34–90% relative to fossil-based production processes. We expect I. orientalis can serve as a general industrial platform for production of organic acids.

Metabolomics↗
DOE OSTI2026

Open quantum system approach to inclusive jet production in heavy-ion collisions

We derive a factorization formula for inclusive jet production in heavy-ion collisions using the tools of Effective Field Theory (EFT). We show how physics at widely separated scales in this process can be systematically separated by matching to EFTs at successively lower virtualities. Owing to a strong scale separation, we recover a vacuum-like DGLAP evolution above the jet scale, while the additional low-energy scales induced by the medium effectively probe the internal structure of the jet. As a result, the cross section can be written as a series with an increasing number of subjets characterized by perturbative matching coefficients each of which is convolved with a distinct function. These functions encode broadening, medium-induced radiations as well as quantum interference such as the Landau-Pomeranchuk-Migdal effect and color coherence dynamics to all orders in perturbation theory. As a first application of this EFT framework, we investigate the case of an unresolved jet and show how the cross section can be factorized and fully separate the jet dynamics from the universal physics of the medium. To compare to the existing literature, we explicitly compute the medium jet function at next-to-leading order in the coupling and leading order in medium opacity.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Non-linear dynamics of jet quenching

We develop a comprehensive analytic framework for jet quenching in QCD media, based on a medium-induced parton cascade sourced by collinear virtual splittings. We show that the energy flow out of the jet cone, driven by turbulent gluon cascades, is governed by a non-linear rate equation that resums gluon splittings at arbitrary angles and is enhanced by the medium length, L. The solution of this equation sets the initial condition for a non-linear DGLAP-like evolution equation, which describes the collinear early vacuum cascade resolved by the medium at angles exceeding the medium resolution angle, θ c . For asymptotic jet energies, the medium-induced cascade displays an exponential behavior that generalizes the Poisson-like distribution of parton energy loss. This formulation enables the resummation of leading contributions in α s ln(1/R), and α s ln(R/θ c ), and powers of α s L. We briefly explore the limit of strong quenching, where analytic treatments are feasible, offering insights into the impact of parton cascades on jet quenching. These results provide guidance for future numerical simulations and analytical investigations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

A buffering heat exchanger/thermal energy storage system for desalination applications

A buffering heat exchanger/thermal energy storage (BHXTES) system was designed using a fast-response phase-change material/graphite foam (PCM/GF) medium for desalination and potentially other industrial applications. Unlike a store-now-and-use-later TES system, this study focused on developing a dynamically balanced, continuously used, system that optimized three functions. A lab-scale prototype was designed and fabricated with a PureTemp 151/GF storage medium. The experimental data showed excellent thermal performance repeatability indicating minimal effects of PCM expansion and contraction on the GF as well as negligible PCM redistribution effects. The experimental data also served as a validation of the numerical model of the BHXTES system, after which optimization of the BHXTES system was conducted through numerical simulations for both PureTemp 151/GF and solar salt/GF as the storage medium. The results show that, with a Therminol 55 heat transfer fluid, continuous operation of the system can be realized with a solar energy source through cycles of 8-h changing for desalination and energy storage with the supplied heat followed by 16-h discharging for desalination with the stored energy. As a result, the working fluid outlet temperatures are generally in the ranges of approximately 128–160 °C for a PureTemp 151/GF medium and 198–220 °C for a solar salt/GF medium.

Buffering↗
DOE OSTI2024

The impact of urban configuration types on urban heat islands, air pollution, CO 2 emissions, and mortality in Europe: a data science approach

The world is becoming increasingly urbanized. As cities around the world continue to grow, it is important for urban planners and policymakers to understand how different urban configuration patterns affect the environment and human health. We aimed at identifying European urban configuration types, based on the Local Climate Zones categories and street design variables from Open Street Map, and evaluating their association with motorized traffic flows, Surface Urban Heat Island (SUHI) intensities, tropospheric nitrogen dioxide (NO 2 ), CO 2 per capita emissions and age-standardized mortality. We considered 946 European cities from 31 countries for the analysis defined in the 2018 Urban Audit database, of which 919 European cities were analysed. Data were collected at a 250 m × 250 m grid cell resolution. We divided all cities into five concentric rings based on the Burgess concentric urban planning model and calculated the mean values of all variables for each ring. First, to identify distinct urban configuration types, we applied the Uniform Manifold Approximation and Projection for Dimension Reduction method, followed by the k-means clustering algorithm. Next, statistical differences in exposures (including SUHI) and mortality between the resulting urban configuration types were evaluated using a Kruskal–Wallis test followed by a post-hoc Dunn's test. We identified four distinct urban configuration types characterising European cities: compact high density (n=246), open low-rise medium density (n=245), open low-rise low density (n=261), and green low density (n=167). Compact high density cities were a small size, had high population densities, and a low availability of natural areas. In contrast, green low-density cities were a large size, had low population densities, and a high availability of natural areas and cycleways. The open low-rise medium and low-density cities were a small to medium size with medium to low population densities and low to moderate availability of green areas. Motorised traffic flows and NO 2 exposure were significantly higher in compact high density and open low rise medium density cities when compared with green low density and open low-rise low density cities. Additionally, green low-density cities had a significantly lower SUHI effect compared with all other urban configuration types. Per person CO 2 emissions were significantly lower in compact high density cities compared with green low density cities. Lastly, green low density cities had significantly lower mortality rates when compared with all other urban configuration types. Our findings indicate that, although the compact city model is more sustainable, European compact cities still face challenges related to poor environmental quality and health. Our results have notable implications for urban and transport planning policies in Europe and contribute to the ongoing discussion on which city models can bring the greatest benefits for the environment, climate, and health.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2024

Imaging the Wake of a Jet with Energy Correlators

In heavy ion collisions, jets are formed during the initial hard scattering event and move through the quark-gluon plasma (QGP) as it evolves. The evolution of the medium manifests itself on the jet via various jet-medium interactions, modifying its substructure as compared to vacuum QCD. Recently, the energy correlator observable has been shown to be a powerful method to decode correlations in pp collisions through measurements in ALICE, CMS and STAR. Additionally, recent studies have shown the sensitivity of this observable to medium modification due to the QGP. In this work [1], we perform the first study of the three-point energy correlator for medium modified jets, to show how it can be used to map out the shape of medium induced modifications. We illustrate this for the specific case of the Hybrid Model, where we show how higher-point correlation functions can image the wake of a jet.

Rai, Ananya [Yale University, New Haven, CT (Unite↗
DOE OSTI2025

Enhanced signal of momentum broadening in hard splittings for $γ$-tagged jets in a multistage approach

We investigate medium-induced modifications to jet substructure observables that characterize hard splitting patterns in central Pb-Pb collisions at the top energy of the Large Hadron Collider (LHC). Using a multistage Monte Carlo simulation of in-medium jet shower evolution, we explore flavor-dependent medium effects through simulations of inclusive and $γ$-tagged jets. The results show that quark jets undergo a non-monotonic modification compared to gluon jets in observables such as the Pb-Pb to $p$-$p$ ratio of the Soft Drop prong angle $r_g$, the relative prong transverse momentum $k_{T,g}$ and the groomed mass $m_g$ distributions. Due to this non-monotonic modification, $γ$-tagged jets, enriched in quark jets, provide surprisingly clear signals of medium-induced structural modifications, distinct from effects dominated by selection bias. This work highlights the potential of hard substructures in $γ$-tagged jets as powerful tools for probing the jet-medium interactions in high-energy heavy-ion collisions. All simulations for $γ$-tagged jet analyses carried out in this paper used triggered events containing at least one hard photon, which highlights the utility of these observables for future Bayesian analysis.

FOS: Physical sciences↗
DOE OSTI2024

Rapid native single cell mass spectrometry

A method for analyzing single cells by mass spectrometry includes the steps of providing a plurality of cells in a liquid medium and placing the cells and liquid medium in a single cell isolation and ejection system. Liquid medium containing a single cell is released from the single cell isolation and ejection system. The liquid medium and single cell are captured in a capture probe containing a flowing capture probe solvent. The cell is lysed by a lysis inducer in the capture probe to disperse single cell components into the medium. The lysed single cell components are transported to a mass spectrometer, where the lysed single cell components entering the mass spectrometer are spatially and temporally separated from any dispersed components of another single cell from the sample entering the mass spectrometer. Mass spectrometry is conducted on the lysed single-cell components. A system for analyzing single cells by mass spectrometry is also disclosed.

Cahill, John F.↗