SEARCH · Search NASA

Results for “membrane pore”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

All sources NASA NTRS DOE OSTI

DOE OSTI2021

Electromechanics of lipid-modulated gating of potassium channels

Experimental studies reveal that the anionic lipid phosphatidic acid (POPA), non-phospholipid cholesterol, and cationic lipid DOTAP inhibit the gating of voltage-sensitive potassium (Kv) channels. In this work, we develop a continuum electromechanical model to investigate the interaction of these lipids with the ion channel. Our model suggests that: (i) POPA lipids may restrict the vertical motion of the voltage-sensor domain through direct electrostatic interactions; (ii) cholesterol may oppose the radial motion of the pore domain of the channel by increasing the mechanical rigidity of the membrane; and (iii) DOTAP can reduce the effect of electrostatic forces by regulating the dielectric constant at the channel–lipid interface. The electromechanical model predictions for the three lipid types match well with the experimental observations and provide mechanistic insights into lipid-dependent gating of Kv channels.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

Porin-Inspired Ionomers with sub-nm Gated Ion Channels for High Ion Conductivity and Selectivity (Final Project Report (2026))

The physiological functions of living systems heavily rely on biological ion channels, whose malfunction can lead to disease. These channels enable selective and regulated transport of water, ions, or small molecules across membranes. Analogously, ionomers used in energy conversion and storage technologies govern ion transport within membrane separators and catalyst binder layers. This DOE Office of Science Early CAREER project aimed to achieve molecular-level control over ionic conductivity and ion permselectivity by translating the functionalities of biological, gated ion channels into a novel class of ion-conducting polymers (ionomers) incorporating macrocyclic calix[4]arene-based repeat units. The overarching goal was to establish fundamental design principles and elucidate proton conduction mechanisms through strategic design of macrocyclic calix[4]arene-containing ionomers, with close relevance to energy conversion and storage devices, including proton exchange membrane fuel cells (PEMFCs). The project leveraged sub-nm-sized macrocyclic pores to facilitate exceptionally fast ion transport (beneficial to addressing sluggish ORR kinetics of PEMFC electrodes) and achieve functionalities of ionic diodes under applied electrochemical fields, beneficial for selective transport/separation.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2026

Water as a gas separation membrane

Efficient gas separation membranes are essential for carbon capture, biogas upgrading, and hydrogen purification. Inspired by how plants absorb CO 2 through water, we present a membrane platform that uses liquid water as the selective layer. Hydrophilic sub-100-nm pores stabilize water through strong capillary forces, enabling operation at feed pressures above 72 bar under dry and humid conditions. Selectivity is governed by gas solubility in water, while permeance is tuned by adjusting the water layer thickness. Reducing this thickness below 200 nm yields CO 2 permeances up to 11,600 gas permeation units with CO 2 :N 2 , CO 2 :CH 4 , and CO 2 :H 2 selectivities of 40, 26, and 31, respectively, surpassing the performance of state-of-the-art membranes. Operation is sustained for over a week without water loss, and performance scales using commercially available porous polymer supports under mixed-gas crossflow conditions. Water’s dissolution-based transport avoids saturation and reaction-rate limits, enabling a robust, high-performance, and environmentally benign gas separation platform.

08 HYDROGEN↗

DOE OSTI2023

Densification Pressure Optimization of MOF-808-Based Membranes for Lithium Metal Batteries

The use of metal–organic frameworks (MOFs) in hybrid electrolytes for lithium (Li) metal batteries has grown in prominence in recent years, primarily due to the chemical tunability of the MOF’s pore structures, which can directly influence Li–ion transport properties. The most attractive form factor for a MOF electrolyte is a thin, flexible membrane, which requires the application of pressure to increase the contact between the MOF particles. Herein, a systematic study of the influence of pressure on the properties of MOF-808-based membranes is presented. It is shown that when a dry, roll-pressed membrane is subjected to pressure ≥120 MPa, a total loss of crystallinity and a significant loss of porosity is observed. Alternatively, a slurry-cast membrane, compressed under controlled pressures, can maintain crystallinity and porosity while decreasing the interparticle void space. Interesting, the conductivity of the membranes infiltrated with liquid electrolyte is not greatly affected by the pressure applied, though ultimately it is shown that for cycling with Li metal, compressed membranes with compact particles are preferred. In conclusion, this study highlights the critical importance of controlling the pressure applied to MOF-based membranes during fabrication and during cell assembly and lays out the foundation for further investigation of how to optimize membrane fabrication for hybrid electrolytes that use MOFs as the dominate component.

25 ENERGY STORAGE↗

DOE OSTI2023

Thermoresponsive antifouling ultrafiltration membranes from mesophase templating

Nanostructured polymers synthesized by lyotropic liquid crystal (LLC) templates with normal hexagonal (H 1 ) structure exhibit a 3D-continuous transport path, which makes them ideal for membrane separation application. Incorporating additional functionality, especially stimuli-responsiveness, in such an ordered structure provides even more application opportunities. Here, in this work, we present the first successful synthesis of H 1 -structured thermoresponsive ultrafiltration (UF) membranes via LLC templating. The membrane contains thermoresponsive Pluronic P84 diacrylate (P84DA) which not only acts as the monomer and structure-directing amphiphile, but also enables the pore size change with temperature. Experimental studies reveal that the swelling capacity of H 1 -templated polymer as well as permeability and selectivity of the obtained membrane can be altered by changing the temperature. Increasing the temperature from 25 to 45 °C increases the normalized flux from 28 to 68 L m -2 h -1 μm and molecular weight cut-off (MWCO) from 2200 to 3900 Da. Furthermore, the membrane shows an outstanding fouling resistance against different solutes.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Size-Selective Nanoporous Atomically Thin Graphene Separators for Lithium–Sulfur Batteries

Lithium–sulfur batteries (LSBs) are extensively researched for their high energy densities but are hindered by the lithium polysulfide (LiPS) shuttling effect, which results in poor cyclability. A popular mitigation strategy is separator modification, where a LiPS trapping material is slurry-coated onto a conventional microporous polypropylene (PP) separator. This additional mass and volume unfortunately compromise the overall energy density of the LSB. This study aims to take a separator modification approach that avoids this issue. Nanoporous atomically thin membranes (NATMs) made of graphene are gaining attention for their scalable synthesis, tunable pore size, and negligible pore length. Herein, we apply a well-characterized graphene NATM for reasons similar to those of a size-selective interlayer in LSBs. The tailored pore size of ∼0.7–1.0 nm and atomic thinness facilitate the passage of Li + (solvated ionic diameters ∼0.54–1.26 nm) and blockage of larger LiPS (solvated ionic diameters ∼0.81–1.69 nm) without adding significant impedances or mass. The sulfur confinement is confirmed through scanning electron microscopy and energy-dispersive X-ray spectroscopy elemental analysis of the Li anode. An LSB with a NATM@PP separator shows virtually no capacity loss over 150 cycles, demonstrating efficacy of size-selective molecular sieving using NATMs in LSBs.

battery separator↗

DOE OSTI2023

A Study on the Synthesis and Proton Transport Behavior of Multilayered ZSM-5 Zeolite Nanosheet Membranes Laminated on Polymer Substrates

Single crystalline ZSM-5 ZNs with thicknesses around 6 nm were obtained by secondary growth of silicalite nanoparticles using diquaternary bis-1,5(tripropyl ammonium) pentamethylene diiodide (dC5) as a structure-directing agent (SDA). The dC5 could be effectively removed from the ZN pores by either high-temperature calcination or UV irradiation in air at room temperature but not by the piranha solution treatment. Ultrathin ZN-laminated membranes (ZNLMs) were fabricated by sandwiching a UV-activated multilayered ZN film between two recast Nafion® layers (ZNLM-Nafion) and by filtration coating from a suspension of thermally activated ZNs on a nonionic porous PVDF (ZNLM-PVDF). The ZNLMs on both supports demonstrated the ability of highly proton-selective ion conduction with low resistances in aqueous electrolyte solutions. The ZNLM-PVDF with PVDF binder was structurally stable, and it achieved a comparably low ASR but much higher proton selectivity compared with a Nafion membrane of same overall thickness. However, detachment between the ZNLM and Nafion layers occurred when the ZNLM-Nafion operated in aqueous electrolyte solutions. Results of this study show the potential for developing ZNLMs as efficient proton-conducting membranes without using expensive ionic polymer matrices. However, the development of polymer-supported ZNLMs is hindered by the current inefficiency in preparing well-dispersed suspensions of open-pore ZNs. Future development of efficient methods for synthesizing open-pore ZNs in dispersed states is key to realizing high-performance ZNLMs on polymers.

36 MATERIALS SCIENCE↗

DOE OSTI2024

DRIFT: Diffusivity Regulation of Isotopes by nanoconFinementT

Spontaneous isotope fractionation has been reported under nanoconfinement conditions in naturally occurring systems, but the origin of this phenomena is currently unknown. Two existing hypotheses have been proposed, one based on changes in the solvation environment of the isotopes that reduces the non-mass dependent hydrodynamics contribution to diffusion. The other is that isotopes have mass-dependent surface adsorption, varying their total diffusion through nanoconfined channels. To investigate these hypotheses, benchtop experiments, nuclear magnetic resonance (NMR) spectroscopy, and molecule scale modeling were applied. Classical molecular dynamics simulations identified that the Na + and Cl - hydration shells across the three different salt solutions ( 22 Na 35 Cl, 23 Na 35 Cl, 24 Na 35 Cl) did not vary as a function of the Na + isotope, but that there was a significant pore size effect, with larger hydration shells at larger pore sizes. Additionally, while total adsorption times did not vary as a function of the Na + isotope or pore size, the free ion concentration, or those adsorbed on the surface for <5% of the simulation time did exhibit isotope dependence. Experimentally, challenges occurred developing a repeatable experiment, but NMR characterization of water diffusion rates through ordered alumina membranes was able to identify the existence of two distinct water environments associated with water inside and outside the pore. Further NMR studies could be used to confirm variation in hydration shells and diffusion rates of dissolved ions in water. Ultimately, mass-dependence adsorption is a primary driver of variations in isotope diffusion rates, rather than variation in hydration shells that occur under nanoconfinement.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2023

Polymer-Infiltrated Metal–Organic Frameworks for Thin-Film Composite Mixed-Matrix Membranes with High Gas Separation Properties

Thin-film composite mixed-matrix membranes (TFC-MMMs) have potential applications in practical gas separation processes because of their high permeance (gas flux) and gas selectivity. In this study, we fabricated a high-performance TFC-MMM based on a rubbery comb copolymer, i.e., poly(2-[3-(2H-benzotriazol-2-yl)-4-hydroxyphenyl] ethyl methacrylate)-co-poly(oxyethylene methacrylate) (PBE), and metal–organic framework MOF-808 nanoparticles. The rubbery copolymer penetrates through the pores of MOF-808, thereby tuning the pore size. In addition, the rubbery copolymer forms a defect-free interfacial morphology with polymer-infiltrated MOF-808 nanoparticles. Consequently, TFC-MMMs (thickness = 350 nm) can be successfully prepared even with a high loading of MOF-808. As polymer-infiltrated MOF is incorporated into the polymer matrix, the PBE/MOF-808 membrane exhibits a significantly higher CO 2 permeance (1069 GPU) and CO 2 /N 2 selectivity (52.7) than that of the pristine PBE membrane (CO 2 permeance = 431 GPU and CO 2 /N 2 selectivity = 36.2). Therefore, the approach considered in this study is suitable for fabricating high-performance thin-film composite membranes via polymer infiltration into MOF pores.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2020

PdAu/YSZ composite hydrogen separation membranes with enhanced stability in the presence of CO

The effects of gold composition on the tolerance of palladium-based composite membranes to CO exposure was studied under the presence of high CO concentrations. Membranes with PdAu compositions ranging up to 41% by mass were exposed to binary 50/50 H 2 /CO gas atmospheres and both hydrogen flux and purity were monitored over time. It was observed that the highest gold composition (41%) suffered no degradation in membrane performance in terms of permeate hydrogen purity and hydrogen permeation flux during the 48 h exposure. Furthermore, for lower gold compositions, X-ray diffraction patterns suggested that carbon entered the film and could be removed by exposure to a non-CO containing gas mixture over time. However, removal of the carbon adversely affected purity; interestingly, some of the purity decline could be reversed upon re-exposure to the CO gas mixture. It is hypothesized that carbon loading in the palladium films causes lattice expansion and may even fill pore defects, thus lowering leaks through the Pd films. Furthermore, this study suggests that a membrane exposed to a CO mixture should not be cycled between CO and non-CO environments, but rather run continuously for best performance. Additionally, the choice of Pd-alloy and metal composition should be considered in regard to its carbon solubility to best predict lifetime performance.

08 HYDROGEN↗

DOE OSTI2022

One-step fabrication of robust lithium ion battery separators by polymerization-induced phase separation

Conventional lithium ion battery separators are microporous polyolefin membranes that play a passive role in the electrochemical cell. Next generation separators should offer significant performance enhancements, while being fabricated through facile, low cost approaches with the ability to readily tune physicochemical properties. This study presents a single-step manufacturing technique based on UV-initiated polymerization-induced phase separation (PIPS), wherein microporous separators are fabricated from multifunctional monomers and ethylene carbonate (EC), which functions as both the pore-forming agent (porogen) and electrolyte component in the electrochemical cell. By controlling the ratio of the 1,4-butanediol diacrylate (BDDA) monomer to ethylene carbonate, monolithic microporous membranes are readily prepared with 25 μm thickness and pore sizes and porosities ranging from 6.8 to 22 nm and 15.4% to 38.5%, respectively. With 38.5% apparent porosity and an average pore size of 22 nm, the poly(1,4-butanediol diacrylate) (pBDDA) separator takes up 127% liquid electrolyte, resulting in an ionic conductivity of 1.98 mS cm –1 , which is greater than in conventional Celgard 2500. Lithium ion battery half cells consisting of LiNi 0.5 Mn 0.3 Co 0.2 O 2 cathodes and pBDDA separators were shown to undergo reversible charge/discharge cycling with an average discharge capacity of 142 mA h g –1 and a capacity retention of 98.4% over 100 cycles – comparable to cells using state-of-the-art separators. Moreover, similar discharge capacities were achieved in rate performance tests due to the high ionic conductivity and electrolyte uptake of the film. Finally, the pBDDA separators were shown to be thermally stable to 374 °C, lack low temperature thermal transitions that can compromise cell safety, and exhibit no thermal shrinkage up to 150 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Highly tunable structure-by-design polymer brush membranes for organic solvent nanofiltration

Synthetic polymeric nanofiltration membrane processes offer an alternate low-energy option to energy-intensive distillation to fractionate similar size organic solvents for chemical, petroleum, food and biotechnology industries. Here, in this study, we synthesize and test a new class of structure-by-design hydrophilic polymeric brush membranes, that address the limitations of commercial polymer membranes, are tunable and exhibit commercially relevant filtration performance. Because these brush membranes are grafted by Single Electron Transfer-Living Radical Polymerization (SET-LRP) and replace statistically random phase inversion or interfacial polymerization used for synthesizing commercial polymer membranes, their porous structure can be remodeled by varying their morphology and chemistry. We graft hydroxyethyl methacrylate (HEMA) brush structures with short and long crosslinkers, demonstrate two competing phenomena - pore stiffening and opening - and obtain high selectivity at reasonable permeability for commercially relevant methanol/toluene separation. This new class of stable, tunable, and scalable membranes offers exciting opportunities to reduce energy for separation of organic solvents.

42 ENGINEERING↗

DOE OSTI2020

Broadening the Gas Separation Utility of Monolayer Nanoporous Graphene Membranes by an Ionic Liquid Gating

Ultrathin two-dimensional (2D) monolayer atomic crystal materials offer great potential for extending the field of novel separation technology due to their infinitesimal thickness and mechanical strength. One difficult and ongoing challenge is to perforate the 2D monolayer material with subnanometer pores with atomic precision for sieving similarly sized molecules. Here, we demonstrate the exceptional separation performance of ionic liquid (IL)/graphene hybrid membranes for challenging separation of CO 2 and N 2 . Notably, the ultrathin ILs afford dynamic tuning of the size and chemical affinity of nanopores while preserving the high permeance of the monolayer nanoporous graphene membranes. The hybrid membrane yields a high CO 2 permeance of 4000 GPU and an outstanding CO 2 /N 2 selectivity up to 32. Finally, this rational hybrid design provides a universal direction for broadening gas separation capability of atomically thin nanoporous membranes.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2023

Interfacial engineering via laser ablation for high-performing PEM water electrolysis

A rationalized interfacial design strategy was applied to tailor the porous transport layer (PTL)-catalyst layer (CL) contact and the PTL bulk-phase architecture. Particularly, at the PTL-CL interface, our results reveal that laser ablated sintered titanium power-based PTLs improve electrolyzer performance at both the H2NEW Consortium baseline catalyst loading of 0.4 mgIr cm -2 as well as at the ultra-low catalyst loading of 0.055 mgIr cm -2 . Under ultra-low catalyst loadings, the laser ablated PTL demonstrates maximum reduction of 230 mV compared to the commercial PTL at 4 A cm -2 , and reduces by 68 mV at 3.2 A cm -2 under H2NEW baseline loading. Laser ablation alters the titanium phase at the interface, so it forms more uniform structure like a microporous layer or a backing layer, leading to an increase in the surface area in contact with the catalyst layer while preventing the membrane from deforming into the PTL. Moreover, we reveal that bulk-phase architecture modification of the PTL by ablating patterned pores at the flow field-PTL interface improves mass transport without sacrificing contact at the CL-PTL interface. Overall, laser ablation of the PTL is an effective method to customize interfacial design to enhance proton exchange membrane electrolyzer performance.

08 HYDROGEN↗

DOE OSTI2026

Heterogeneous Multilayer Nanopores via Chemically Tuned Dielectric Breakdown for Single‐Molecule Sensing

Solid-state nanopores are powerful platforms for single-molecule sensing, yet their performance is often constrained by fabrication complexity, noise, and limited control over surface properties. Here we report a direct method to fabricate heterogeneous multilayer nanopores using chemically tuned controlled dielectric breakdown (CT-CDB). We integrate hBN, MoS 2 , or graphene atop a silicon nitride membrane to form five distinct bilayer and tri-layer architectures, with bare SiN x nanopore as a control. CT-CDB achieves pore formation reproducibly through material-stacks with high efficiency, good pore size control, and strong yield, validated by various characterizations. Transferrin protein translocation experiments, supported by simulations, reveal that multilayer configurations modulate protein conformations, ionic current blockade and dwell time distributions, reflecting combined effects of membrane type, interfacial chemistry, and local electric field gradients. A supervised machine learning framework is implemented to assist identifying multilayer structure effects embedded in signal signatures, with over 96% accuracy. This work presents a modular and scalable framework for functional nanopore engineering with complex structural integration, thereby expanding the potential of 2D materials in single-molecule sensing applications.

2D materials↗

DOE OSTI2022

Tree-inspired lignin microrods-based composite heterogeneous nanochannels for ion transport and osmotic energy harvesting

One of the key processes of tree lignification is that lignin penetrates into the cell wall and fills in the cell wall framework, thereby increasing the hardness and hydrophobic of the tree channels, which is beneficial to consolidate and support the tree cell wall and water transport. Inspired by this natural process, we demonstrated a lignin-based nanofluidic heterogeneous membrane that closely mimics the channels in tree, which can realize ion transport function and effectively capture reverse electrodialysis. The membrane was synthesized by heating dealkaline lignin and PVA at 200 °C and this formed fusiform microrods and a closed-packed membrane. Simultaneously, this membrane composited with anodized aluminum (AAO) channels membrane at 200 °C to form asymmetric heterogeneous nanochannels membrane, which can transport counter-ions and harvest osmotic energy. This membrane implements ion current rectification in 0.1 M KCl electrolyte solution at pH 3 due to the confinement of pores and opposite surface charges in lignin-based heterogeneous nanochannel. An output power density of 0.97 W m- 2 is obtained under a 50-fold salinity gradient, which can be further improved to 1.19 W m -2 by increasing the salinity gradient from 50-fold to 500-fold. Accordingly, this nanofluidic membranes were prepared by using lignin, the key component in tree, which not only mimicked a crucial process of the water and ionic transport process of channels in tree, but also had the prospect in the field of osmotic energy harvesting.

09 BIOMASS FUELS↗

DOE OSTI2025

Understanding the impact of the gas diffusion layer structure on catalyst utilization in the PEM water electrolyzer

A multiphysics half-cell model of a polymer electrolyte membrane water electrolyzer (PEMWE) was developed to probe impacts of the detailed 3-dimensional pore structure of the gas diffusion layer (GDL) on performance characteristics. We show that pores in the titanium GDL mesh led to significant underutilization of the catalyst layer (CL), with only 45% of the catalyst effectively utilized. This contradicts the assumption of uniform electron flow across the CL, as shown in graphical abstract (a), as near-zero current was observed near GDL pore regions and the current distribution in CL was influenced by GDL structure, as shown in graphical abstract (b). Instead, oxygen generation was primarily concentrated under the solid titanium regions, diffusing out around the pore walls. High current density peaks were also noted at the GDL-catalyst contact, correlating with degradation hotspots that were directly observed in companion experiments, as shown in graphical abstract (c). Collectively, these findings point to the critical importance of the heterogeneous GDL porous architecture not only for PEMWE efficiency but also for uneven degradation of the CL.

COMSOL↗

DOE OSTI2020

Water separation device for engine exhaust gas

A system includes an engine and an exhaust conduit in communication with the engine. A water separation device has exhaust gas passageways in communication with the exhaust conduit. The water separation device has a substrate and a membrane on the substrate. The substrate has inner walls surrounding the exhaust gas passageways with at least one of the inner walls being common to at least two of the exhaust gas passageways. The membrane is between the exhaust gas passageways and the substrate and has capillary condensation pores extending from the exhaust gas passageways to the substrate.

33 ADVANCED PROPULSION SYSTEMS↗